Zenworks 6.x imaging - Dell Laptop D630
We are trying to setup a new image for the new Dell Latitude D630 laptops.
Problem is when we try to run the imaging program to get it started we get
kicked out immediately back to the prompt.
The last time we saw a similar issue to this was when we were imaging the
Dell Optiplex GX745's. We had to change the SATA drive type to Legacy and
Novell had to do some re-coding of our Zenworks software to make it work.
I am wondering if this is a known issue with Zen 6.5 and if an upgrade to
Zen 7.0 can fix it or if it can be taken care off without upgrading. Thanks
Hi Everybody,
we have got the same situation here. I managed to add the newsid option to my PXE environment and it works fine now.
My problem now is, that the harddisk is not recognized by Zenworks 6.5SP2 IR1. I guess its because of the new Intel chipset (Santa Rosa platform).
Do you have an idea how to get this working ?
Best regards
Stefan
Free News Reader
http://put.hk
http://put.hk/reader/forums.novell.c...x.imaging.html
Kurt Finlayson <[email protected]> wrote:
> Bryan Rowe wrote:
> > I am having the same issue. However when I try the ZDM 7 SP1 HP5 bootcd,
> > the tg3 driver won't load. Does anyone have any ideas?
> >
> >>>> On 6/21/2007 at 12:26 PM, in message
> > <ShAei.48$[email protected]>, Kurt
> > Finlayson<[email protected]> wrote:
> >> Chad Capule wrote:
> >>> We are trying to setup a new image for the new Dell Latitude D630
> >>> laptops. Problem is when we try to run the imaging program to get it
> >>> started we get kicked out immediately back to the prompt.
> >>> The last time we saw a similar issue to this was when we were imaging
> >>> the Dell Optiplex GX745's. We had to change the SATA drive type to
> >>> Legacy and Novell had to do some re-coding of our Zenworks software to
> >>> make it work. I am wondering if this is a known issue with Zen 6.5 and
> >>> if an upgrade to Zen 7.0 can fix it or if it can be taken care off
> >>> without upgrading. Thanks
> >>>
> >> Just try the bootcd from ZDM 7 SP1 HP5 and see. You do not have to
> >> upgrade to be able to test it.
> Try TID:
> http://www.novell.com/support/search...200%2039475634
> --Kurt
Similar Messages
-
Trying to image a Dell Latitude D630
I am trying to image a Dell Latitude D630 laptop using PXE. It is set to PXE
boot in the BIOS. I select Maint Mode when the imaging screen comes up.
Output starts running on the screen as normal then all the sudden the screen
goes black and nothing else happens. I have to end up powering off the
laptop.
I saw a previous post where someone was having the problem and suggeted
toggling between CRT and LCD display on the laptop but this does nothing.
We are running Zen 6.5 SP2.
Any suggestions?Thanks for the help Marcus.
I tried adding the two lines but it did not work. I was finally able to
resolve my issue but using the Zen 7 SP1 Boot CD along with TID 3421576 to
get the laptop imaged. It looks like it is time to upgrade my Zenworks!
Thanks again.
"Marcus Breiden" <[email protected]> wrote in message
news:[email protected]..
> On Wed, 26 Sep 2007 17:30:27 GMT, SRL wrote:
>
>> Can I just tack these two lines on to the end of the file or is there a
>> specific place they need to go?
>> Do I need to reboot after making these changes?
>
> end of file iirc, no reboot of the server necessary
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please remove the - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.didas.de -
Using Dell Latitude D630 with Intel 965 Express Chipset with Adobe CS6 Photoshop 3D features
Hello,
Here is my configuration:
- I am using Windows 7, 4-bit OS
- Dell Latitude D630, which comes with Intel Mobile 965 Express Chipset and Accelleration Drivers.
- If I press CTRL-ALT-F12, I can see the Intel Graphics Media Acccelerator Driver GUI. There are 3D settings
configuration, which are labelled with OpenGL, and a bunch of values that can flipped on and off. So, I have some
warm fuzzy that OpenGL is enabled on my systme.
- When I look at the details of the driver, it says 9/23/2009, driver version 8.15.10.1930. If I attempt to update
driver, and select search automatically, "Windows determined the driver software for your device is up to date".
So, this gives me some warm fuzzy that I'm on the latest driver.
When I open up PhotoShop CS6, and click on Edit->Preferences->Performance, Detected Graphics processor
is grayed out and I am told that I need to upgrade either my driver or my card. Well, I'm on a laptop so that might
be an issue.
My driver seems to support OpenGL, so is there some configuration thing I can do to get Photoshop to recognize my
video accelerator to make this work? Or am I out of luck with using 3D and accelerated features with this laptop?I did try to go through the Intel driver upgrade process.
Visited http://www.intel.com/p/en_US/support/detect?iid=dc_iduu (Intel Driver update Utility) with IE.
Detected my graphics drivers and indicated that:
Product Detected
Intel® GM965
Current Driver Installed
8.15.10.1930
Your driver is current.
So, nothing useful there. What I find puzzling is the when I hit CTRL-ALT-F12 and click on 3D settings, there
are plenty of configuraiton choices for OpenGL, with many settings being Off. So, I was hoping that either (a)
there is some combination of choices with these OpenGL options to enable enough of it so that Photoshop CS6 3D features
would work, or (b) maybe registry settings to hack at to "enable" OpenGL or some way of getting Adobe software to try to
rediscover the accelleration support once I change the settings. -
How to update Dell laptop's BIOS?
Hi all,
I followed this tutorial: http://linux.dell.com/wiki/index.php/Te … BiosUpdate
I have a Dell laptop:
[root@localhost i-sty]# smbios-sys-info-lite
Libsmbios: 2.2.28
System ID: 0x0569
Service Tag: HNYCFV1
Express Service Code: 38453709133
Error getting the Aset Tag: unknown error
Product Name: Inspiron 5520
BIOS Version: A11
Vendor: Dell Inc.
Is Dell: 1
But I cant find .hdr file here: http://linux.dell.com/repo/firmware/bios-hdrs/ with MY System ID.
My bios version is A11, the newest is A13.Try these instructions:
https://wiki.archlinux.org/index.php/Fl … from_Linux
However for your BIOS: search Dell Support for Downloads for the Inspiron 5520, download the BIOS update (Inspiron_5520_A13), extract it, and the QCL00A13.fd file should be the BIOS image.
BTW I am not liability if this bricks your laptop. Follow my advice at your own risk. Good luck. -
Nvidia GeForce 8600M GT is defective on Dell laptops; what about Macs?
http://www.macsimumnews.com/index.php/archive/nvidiageforce_8600m_gt_is_defective_on_dell_laptops_what_aboutmacs/
Dell will offer 12-month limited warranty enhancement to all worldwide customers of 15 laptops with defective Nvidia GPUs. These Dell laptops use nine models of graphic processor units, and only one of them is also used on MacBook Pro models (15 and 17 inch models), sold from mid-2007 to now.
It’s the GeForce 8600M GT. What is Apple doing for these customers, and why Nvidia doesn’t say the name of all defective models?This is a user to user forum. No one here works for Apple so you will not get an answer. You can try to contact Apple directly.
-
Help with enabling TPM in Task Sequence for Dell Laptops
Hi there,
I would appreciate some advice on creating a task sequence for Win8.1 with TPM enabling for Dell laptops; I have BitLocker set up manually with a Group policy, but want to have TPM enabled in the task sequence. I have read older posts on sites such as windows
noob, but can't see how to reference the CCTK and get TPM going for win8.1 in a SCCM2012 environment.
Obviously I haven't created this before so any help would be appreciated; I have noticed when I try to import my CCTK configurations into SCCM as it isn't a zip file I cannot do it.Luckily Dell wrote a whitepaper about that subject, see:
http://en.community.dell.com/techcenter/extras/m/white_papers/20209083
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
I have been unable to find and import from the version of Firefox on my Dell laptop to an Apple iMac the folders containing bookmarked website addresses. In the process, I've created a mishmash of unwanted bookmarks. Please provide me a step by step process to import the folders to the version of Firefox on the iMac. The process to accomplish this seems very awkward and counter-intuitive. The same goes for creating new folders and bookmarking website addresses to those folders on the version of Firefox installed on the iMac.
Chris,
Thanks for the tip about the Firefox Sync feature. A friend and I managed to use the Sync feature to "transfer" the folders of Bookmarked website addresses from the Dell to the iMac. We found that shutting off and rebooting the receiving iMac computer was necessary for all the folders to transfer over. Also, the entire process would have gone more smoothly had we had separate internet connections for the two computers, but we managed to shift our single internet connection between the computers as the Sync process progressed through its steps. Definitely a learning process.
Thanks,
Charlie -
Java plug-in does not work on DELL laptop w/ ATI video card
Hello there,
I try to run Java Web Start on my new DELL laptop with ATI mobility radeon 7500 video card. When I run the SwingSet2 App, the whole system locks up, so I have to do a hard re-boot on my laptop. I found that this problem happens to other DELL laptops when I address this issue to my co-workers. Nevertheless, this problem is fixed when I run Java Web Start on some other desktops that does not use the ATI video card.
Have any of your experience this? Does any know any workaround for this problem?
Please help. Thanks.
A.A.Hello there,
I try to run Java Web Start on my new DELL laptop with
ATI mobility radeon 7500 video card. When I run the
SwingSet2 App, the whole system locks up, so I have to
do a hard re-boot on my laptop. I found that this
problem happens to other DELL laptops when I address
this issue to my co-workers. Nevertheless, this
problem is fixed when I run Java Web Start on some
other desktops that does not use the ATI video card.
Have any of your experience this? Does any know any
workaround for this problem?
Please help. Thanks.
A.A.Do you use sun one studio? Do you experience system hangs and blue screens?
I do, and I was kind of hoping I'm not alone.
Morten -
I bought an iphone 5C and my music from my dell laptop doesn't let me sync my music into my phone. When i first bought it I accidentally pressed don't show again on itunes. How do I download itunes 11.1 or later now? I have been trying for atleast a month, but I can't find any solutions. I had payed a lot of money on those songs and albums, and now I can't even sync it on to my phone. I know it was stupid of me to press that button, but I need help on trying to get it to sync. -Mohima
You need to have the latest version of iTunes on the computer, version 11.1.3 to be able to handle syncing a newer phone with iOS 7. The iTunes on the iPhone has nothing to do with syncing and is installed by the iOS.
Go to iTunes on the computer, click on Help, Check for updates to update iTunes on the computer, or go to to www.apple.com/itunes/download and download and install the latest version of iTunes to correct your problem. -
How do I connect a mac cinema display to a dell laptop with VGA output?
I need to connect my coworkers Mac Cinema display to his Dell Laptop with VGA out, running Windows 7. We have a VGA to DVi adapter, but it doesn't work. Do we need a different adapter or a driver? Thanks.
DVI-I offered by most computers has support for up to a wider-than-1920 Digital display AND a complete set of VGA signals in it.
If you have an adapter from DVI [computer] to VGA [display] it has no conversion logic in it and should be called a VGA extractor. It will NOT work the other direction.
I think what you need is a better computer or a worser (VGA) display. -
All devices on network lose internet connection when Dell laptop connected
I have successfully setup my AEBS network and am using two wireless clients--HP printer and Xbox access point (both 802.11 G) and a wired iMac that also is connected via Airport (so I can move it around if i want). I tried connecting my Dell Latitude D830 wirelessly and within a few minutes of connecting the AEBS loses internet connectivity. Unplugging and restarting the AEBS restores the internet but it just drops off again in less than 10 minutes. My question is, what might be causing this and what can I do about it? One peculiar thing to me is that I am using the WEP security option since the Xbox doesn't seem to support WAP2. When connecting the Xbox it reports the network as WEP but the HP printer and Dell Laptop but suggested the network was indeed WAP even though I'm clearing using WEP security. Maybe it's nothing but wanted to add for completeness.
The Dell is running Vista Enterprise edition.
Thanks for any help.I've noticed a similar issue. Any time my HP/Vista laptop is connected to my AEBS it loses the network connection at inconsistant time intervals(~10-15 min).
-
I received a 27 LED apple/mac monitor --not the 2011/12 version though.
I want to use with my work computer--a dell laptop. I can't seem to find the right adaptor to connect the two.
I need a dvi port converter that also connects to my vga on my laptop (so need the male end of hte vga since my laptop has the female end).
I only found 1 adaptor but it ends with a dvi on a vga. I don't have hdmi on my laptop either--tried that adaptor as well when I couldn't see on the pic when I ordered that it was hdmi not usb). Please help. I have read so many blogs that say it can be done.BDAqua wrote:
…try one of these...
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
BDAqua,
I'm flabbergasted! I wasn't aware of that technology. I'll try reading up on it after I get some sleep; maybe I'm just dreaming right now.
Would that kind of device work with my lowly MacBook running Snow Leopard 10.6.8?
(Don't laugh. I literally rescued it from the trash when my wife discarded it. It's my only Mac-Intel machine.)
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version (system): 1.13f3
Serial Number (system): W8XXXXXXGQ
Hardware UUID: 00000000-0000-1000-8000-001B631BC56F
Sudden Motion Sensor:
State: Enabled
Graphics/Displays:
Intel GMA 950:
Chipset Model: GMA 950
Type: GPU
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
Color LCD:
Resolution: 1280 x 800
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected -
iTunes will not open on my dell laptop any more. I have uninstalled and downloaded several times but no joy. I would welcome assistance with this problem please. Thank you
Hi jophis25,
Thanks for visiting Apple Support Communities.
If iTunes wont launch on your PC, the steps in this article can help:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
All the best,
Jeremy -
My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.)
Maybe you are looking for
-
Time Machine transfer to new Macbook Pro
I bought a new Macbook Pro last week that I need to replace tomorrow due to slight case damage - I installed loads of applications such as Office 2008, transferred all photos etc and wondered if I do a Time Machine backup today before I return it tom
-
ATI Radeon 9800 vs. 20" ACD
The Tech Specs for the 20" ACD indicate that the supported resolutions are 1680 x 1050, 1280 x 800, and 1024 x 640. None of these resolutions are supported by the ATI Radeon 9800 according to the Mac User Guide from ATI's web site. Do I have to get a
-
Cannot open adobe bridge from cs6
cannot open adobe bridge from cs6
-
Hi I am new to coherence and trying to set up a .NET client for coherence. I have configured my client and server. When my server starts up it does state : 2013-11-20 16:47:20.177/7.941 Oracle Coherence GE 12.1.2.0.0 <Info> (thread=NameService:TcpAcc
-
Question about TC and additional EHDs.
I am planning on purchasing a TC and heard that you can connect an additional EHD to the TC for additional HD space. Is this true? This will make a big difference if I buy the 500GB or the 1TB version. What makes of EHDs are compatible with the TC? T