Zenworks 7 Desktop Management on NLSBS9?

We are reviewing some Novell products for intern use. Novell Linux Small
Business Suite 9 seems to fit our needs perfectly. Now we're going to
verify Zenworks 7 also and we're wondering if we can install it on NLSBS9.
System requirements says SUSE LINUX Enterprise Server 9 SP1 or Novell
Open Enterprise Server (Linux) 1.0 is needed if you want to use Desktop
Management Services. NLSBS is based on SLES9, so is it possible to
install Zenworks 7? Novell documentation wasn't clear about it, neither
Zen7 nor NLSBS docs.
regards
Martin
Martin Vogt
[email protected]
itCampus Software- und Systemhaus GmbH
Leipzig - Halle - Wittenberg
Nonnenstrae 42
04229 Leipzig
Fon: +49. 341. 4 92 87 21
Fax: +49. 341. 4 92 87 01
http://www.itcampus.de
Amtsgericht Leipzig HRB 15872
Geschftsfhrer Andreas Lassmann

Marcus Breiden schrieb:
> will have to ask... I would guess it should work.. but haven't tried it..
Did you get any information abouts zen7 on NLSBS9?
> also please don't cross post...
sorry, I was unsure about right ng
regards
Martin
Martin Vogt
[email protected]
itCampus Software- und Systemhaus GmbH
Leipzig - Halle - Wittenberg
Nonnenstrae 42
04229 Leipzig
Fon: +49. 341. 4 92 87 21
Fax: +49. 341. 4 92 87 01
http://www.itcampus.de
Amtsgericht Leipzig HRB 15872
Geschftsfhrer Andreas Lassmann

Similar Messages

Installing Zenworks 7 desktop management on Windows 2008

Hello,
I tried to install Zenworks 7 sp1 Desktop Management on a Windows 2008 server running Edirectory 8.8 sp5, but I got an error message saying that the OS is not suppported.
Is there anyway to install this on a Windows 2008 server ?
I accidently posted this thread under "Imaging" as well.

Ye,
same answer as in the imaging forum - you need ZCM 10
Shaun Pond

Zenworks 7 Desktop Management on Windows Server 2008

Hello,
I tried to install Zenworks 7 sp1 Desktop Management on a Windows 2008 server running Edirectory 8.8 sp5, but I got an error message saying that the OS is not suppported.
Is there anyway to install this on a Windows 2008 server ?

Ye,
you need ZCM 10 for W2K8
Shaun Pond

Desktop management and Remote access on OES 2 SP1?

I am preparing a migration of several servers from NW 65. SP6 to OES 2 SP1 Linux. One of those servers has ZENworks 7 Desktop Management/Middle tier server installed.
I am seeing statements in the documentation which make me wonder.... We use Desktop Management mostly for remote access, only now and then for inventory. I can live with the idea of doing a fresh install of ZENworks 7 desktop management following migration, and then importing the workstations anew.
I am planning on upgrading to ZENworks 10 later in the year. However, under the circumstances I am wondering if the migration might be a good time to jump to ZENworks 10 Configuration Management? I understand that Console1 goes away(?) but I do not understand what is to take the place of Console1.
Do any of you have experience with making that leap? What are the major considerations I should be looking at?

tkindig,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Zenworks for Windows 7 desktop management

Hi there,
I have a Novell Engineer coming in to do my install my Novell Open Enterprise file server in a few days. He told me to download Zenworks so it can be installed afterwards. Though when I looked, I see a version 7 and 10 for Zenworks. Though version 10 doesn't seem to do with desktop management?
Our old file server is running version 4 of Zenworks, and along with our file server upgrade we are planning to move our workstations to Windows 7.
Is version 7 of Zenworks the latest version that I will need for desktop management and enforcing various desktop policies on Windows 7 pc's?
I also would like to use Zenworks imaging for cloning, does version 7 (or whichever one is current) support Windows 7 imaging?
Thanks.

Originally Posted by spond
Snobee,
ZENworks 7 Is the closest to the version you currently run now, but
does not support Windows 7. ZCM 10 does support Windows 7, but is a
ground-up rewrite, and is a very different beast.
Shaun Pond
Thanks for the info. So will ZCM 10 do the similar desktop management and imaging that Zen7 and my older version 4 does? Just do it in a different way?

Zenworks Desktop Management for Windows 7

Hello,
We are trying to figure out what is the solution for Windows 7. We are currently in a Novell environment (I believe Zenworks 7). Being unfamiliar with the Zenworks Desktop Management - can someone please explain the following to me:
We are trying to find the application launcher answer to deploying on Windows 7. Whenever I run the ZfDAgent.msi (7 agent/Zenworks Desktop Management) on a Windows 7 (Enterprise) machine, it says the following:
"The Remote Management Mirror Driver can only be installed on Windows 2000and Windows XP machines". Is there a new version of the Zenworks Desktop management software available/coming out for Windows 7?
Any help is greatly appreciated!

Originally Posted by ketter
On Mon, 17 May 2010 20:36:02 GMT, Yappy70
<[email protected]> wrote:
>
>Hello,
>
>We are trying to figure out what is the solution for Windows 7. We are
>currently in a Novell environment (I believe Zenworks 7). Being
>unfamiliar with the Zenworks Desktop Management - can someone please
>explain the following to me:
>
>We are trying to find the application launcher answer to deploying on
>Windows 7. Whenever I run the ZfDAgent.msi (7 agent/Zenworks Desktop
>Management) on a Windows 7 (Enterprise) machine, it says the following:
>
>"The Remote Management Mirror Driver can only be installed on Windows
>2000and Windows XP machines". Is there a new version of the Zenworks
>Desktop management software available/coming out for Windows 7?
>
>Any help is greatly appreciated!
Windows 7 is not supported on Zenworks for Desktops 7. You will need
to upgrade to Zeworks Configuration Management 10. I'm in the middle
of doing this myself right now.
Regards,
Ken
Thanks for the quick reply -- by chance have you ran across any white papers, webcasts, or documentation as to the desktop application features included with Zenworks Configuration Management 10? Such as how the application explorer/window are handled with this new version? I tried doing a search to no avail.
Thanks for any suggestions!

Netware zenworks desktop management 7 RCConsole MFC applicat

I am using Zen v7. I have found that when I remote into computers, open a DOS window, try to ping an IP, after I type a few characters into the DOS window, an Windows error pops up "RCConsole MFC application problem...." IT disconnects me from the remote control.
When I try to reconnect, i get a 1805: this app is currently being performed on the target machine and will not be available.
This seems to only happen on DOS windows and Green screen mainframe applications like WRQ Reflections.
Anyone have a fix for this. Searching Forums and Google have similar problems but no fixes.
Thanks

continued
<MATCHING_FILE NAME="ZenComp.dll" SIZE="61440" CHECKSUM="0x91118A87" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="ZENworks Remote Management Compression File" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZenComp.dll" INTERNAL_NAME="ZenComp.dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x3" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:31:16" UPTO_LINK_DATE="05/18/2005 11:31:16" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="zenmouse.dll" SIZE="53248" CHECKSUM="0xB39F50" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Zenworks Cursor Shape change grasping file" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="Zenmouse.dll" INTERNAL_NAME="Zenmouse.dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x3" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:33:11" UPTO_LINK_DATE="05/18/2005 11:33:11" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="ZenRem32.exe" SIZE="163840" CHECKSUM="0xACE9CD5F" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Novell ZENworks Remote Management Agent" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZenRem32.exe" INTERNAL_NAME="ZenRem32.exe" LEGAL_COPYRIGHT="Copyright 1999-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x3" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="07/11/2005 06:03:31" UPTO_LINK_DATE="07/11/2005 06:03:31" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="ZRmResLd.dll" SIZE="65536" CHECKSUM="0xDF3EC861" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Novell ZENworks Remote Management Resource loader" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZRmResLd.dll" INTERNAL_NAME="ZRmResLd.dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:30:14" UPTO_LINK_DATE="05/18/2005 11:30:14" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\rmcomres.dll" SIZE="16384" CHECKSUM="0xE9995AD7" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0,0" FILE_DESCRIPTION="RmComRes.DLL" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="RmComRes.DLL" INTERNAL_NAME="RmComRes.DLL" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:34:24" UPTO_LINK_DATE="05/18/2005 11:34:24" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\sftplg32.dll" SIZE="45056" CHECKSUM="0xDB30B415" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7.0.0.0" FILE_DESCRIPTION="FTP resource file." COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENWorks for Desktops Remote Management " FILE_VERSION="7.0. 0.0" ORIGINAL_FILENAME="Sftplang.rc" INTERNAL_NAME="Serving FTP" LEGAL_COPYRIGHT="Copyright (C) 1999 - 2005 Novell Inc., All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:19:28" UPTO_LINK_DATE="05/18/2005 11:19:28" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\ZenRmAdt.dll" SIZE="53248" CHECKSUM="0x98DF6654" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="ZenRmAdt" COMPANY_NAME="Novell Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZenRmAdt.dll" INTERNAL_NAME="ZenRmAdt.Dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/23/2005 09:04:31" UPTO_LINK_DATE="05/23/2005 09:04:31" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\ZRm32Res.dll" SIZE="36864" CHECKSUM="0x1F08852" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Remote Management Agent resource bundle" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management " FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="zrm32res.dll" INTERNAL_NAME="zrm32res.dll" LEGAL_COPYRIGHT="Copyright 1999-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/23/2005 09:05:09" UPTO_LINK_DATE="05/23/2005 09:05:09" VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
<EXE NAME="kernel32.dll" FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="989696" CHECKSUM="0x2D998938" BIN_FILE_VERSION="5.1.2600.5781" BIN_PRODUCT_VERSION="5.1.2600.5781" PRODUCT_VERSION="5.1.2600.5781" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft Windows Operating System" FILE_VERSION="5.1.2600.5781 (xpsp_sp3_gdr.090321-1317)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT=" Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xFE572" LINKER_VERSION="0x50001" UPTO_BIN_FILE_VERSION="5.1.2600.5781" UPTO_BIN_PRODUCT_VERSION="5.1.2600.5781" LINK_DATE="03/21/2009 14:06:58" UPTO_LINK_DATE="03/21/2009 14:06:58" VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>

Zenworks.Desktop-management

hai all,
Iam Fresher to Zenworks6.5... I Have A Problem with Workstation
Import Policy...In the This Tab is Blank Screen..Without Importing The
Workstations Iam Unable to assign the Policies...I Searched In Documents
that Saying that Just Install the Desktop management agent in Client...
In Server Select The Container for Workstation Objects it will
Automatically Import...
But I Tried and Tried But Result is Same Blank Screen...
Pls Guide me a Simple Words( Installation Step By Step)
Thanks,
Vinay..

I think this is a very old problem - I cannot find a TID reference at
the moment, but if I remember correctly, this happened because the
ZENworks agent was not installed. Do you have the ZENworks 6.5 agent
installed on the PC where you are launching ConsoleOne?
Shaun Pond

Install Errors-Zen 7 SP1 Desktop Management

I had a server die that used to do my Zen Imaging. I installed that server 4 years ago. I am trying to install it on a different NW6.5 SP7 server. It goes through the install process, but when it finishes, it has the errors listed below. Does anyone have some ideas how I can make this install correctly? I am primarily interested in imaging but I selected all desktop management components including inventory, etc. Thanks.
ZENworks Desktop Management installation failed on the following servers:
JHS_WEB.jhs
See below for details.
[JHS_WEB]
Pre-install steps completed successfully
Shared ConsoleOne Components NOT successfully installed on JHS_WEB at H:\public\mgmt\consoleone\1.2
AppMgmt ConsoleOne Components NOT successfully installed on JHS_WEB at H:\public\mgmt\consoleone\1.2
Imaging ConsoleOne Components NOT successfully installed on JHS_WEB at H:\public\mgmt\consoleone\1.2
RMInv\Console\RM ConsoleOne Components NOT successfully installed on JHS_WEB at H:\public\mgmt\consoleone\1.2
RMInv\Console\RMInv ConsoleOne Components NOT successfully installed on JHS_WEB at H:\public\mgmt\consoleone\1.2
ZdmReg NOT successfully installed on JHS_WEB at H:
AppMgmt\public Components NOT successfully installed on JHS_WEB at H:
Shared Public Components NOT successfully installed on JHS_WEB at H:\public
RMInv\Server\Inv\NW\sys Components NOT successfully installed on JHS_WEB at H:
PXE on Disk Components NOT successfully installed on JHS_WEB at H:\PXE on Disk
TFTP NetWare Components NOT successfully installed on JHS_WEB at H:\system
Error: There was an error installing ZENworks Desktop Management on JHS_WEB. Error: An error occured during file copy or configuration. See above for more details and be sure that no ZENworks Desktop Management files are open or locked.

I seem to still be having trouble. I cannot find a imgserv.nlm on the server. I believe that is what allows me to see what images are sent and received at the server console. I am wondering if everything loaded. Is there a way to test my installation or is there certain nlm's that I should look for?

Desktop Management Agents Upgrade

Hi,
Eventually in a few months I'll be upgrading our current student server at
the High School I work at from Netware 6 and Zenworks 4.01 ir6 to Netware
6.5 and Zenworks 6.5.
Each of the computers connected to the student server have a Zen partition
installed for imaging purposes and all the up to date desktop management
agents.
If I update from Zenworks 4 to Zenworks 6.5 without updating the Desktop
Management Agent to Zenworks 6.5, will the imaging, remote control, policy
packages, NDPS printing not work anyomre or will it all still work even
though the Zenworks version is 6.5 but all the computers have Desktop
Management Agents 4.01 ir6? I would like to update to Zenworks 6.5 and
slowly update the Desktop Management Agents(from Zen 4 Desktop Management
Agents to Zen 6.5 Desktop Management Agents) in each computer lab over
time, but if it's going to effect the imaging server policy, user policy
packages, remote control, NDPS printing etc... I'll have to plan the
upgrade over the summer time.
Thanks for your time!
Brad Pilon

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Can not install Desktop Manager because of DEP.

Good day BlackBerry users,
I've just got myself a BlackBerry Storm 1, and I'd like to install the desktop manager.
I've downloaded the install from the site and I tried to install it.
In the beginning it's going well, I start it, select my country... but then...
...When I've selected my country and I click next the install freezes and I get the DEP error.
I've looked around these forums, but I do not get any help.
Could someone please help me?
I'm pretty annoyed by this error.
I hope to get a useful answer.
Kind Regards,
Jurriën van Rooij.
Solved!
Go to Solution.

Unfortunately no, like with most software installations, information has to be written to certain parts of the computer, such as the registry, and you can't just use a USB flash drive to run your applications.
This error is a Microsoft Windows error and occurs when Windows detects code running from a protected location. At this point, Microsoft is your best bet for support as this is not a BlackBerry Desktop Manager error.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Error message can not download desktop manager

my laptop os vista home premium i uninstalled the desktop manager ,when i downloaded and tryed to reinstall the softwear i get this message Error 1723 There is a problem with this windows installer package.A DLL required for this install to complete could not be run.Contact your support personel or package vendor Action RepairRimUsbDriverNT.191E2coc_5A62_43E3_B035...please hep

The mini says it has 869gigs of free space.
I am totally confused. You posted in the iMac forums. If your problem is with an iMac, we need to know what your iMac shows as to how much space you have left and how large your HD is. This info can be found in Disk Utility and/or at the bottom of a Finder window among other places.

Unable to install Blackberry Desktop Manager on Windows 8

Hi Team,
Please help as I am trying to install Blackberry Desktop Software for my Blackberry Bold 4 (9900) phone,
I did not get any software CD with the phone hence downloaded the software from
http://us.blackberry.com/software/desktop.html
and when I try to install I get the following error,
I do not understand this issue can any one help me on this.
Windows ® Installer. V 5.0.9200.16384
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB19300 Windows Installer command line parameters information box appears when attempting to install BlackBerry Desktop Manager
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Desktop Manager 6.0 stopped working

For no apparent reason my DM version 6 stopped working yesterday. I have de- and re-installed it and rebooted with no improvement. When the application opens I see a partially loaded screen. Very limited text and drop down arrows that do nothing, no menu options. I do not get an error message. I'm using Windows 7 and nothing about my laptop has changed since the last time I used the DM, except for I installed SKYPE.
What can I do if a re-install did not take care of it?
Thanks,
Carolyn

In Desktop Manager, Help > About, what is your version number?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Easy guide to troubleshooting the Desktop Manager

"Your messaging server does not support wireless synchronization."
-Make sure the user is on the BES. Typically they will get this error message when they are not on the BES.
The desktop manager is showing "disconnected."
-Make sure that the user has gone into the desktop manager and selected options > connection settings > detect.
-Complete a hard reset.
     Disconnect the BB from the computer.
     Perform a hard reset on the BB. (Leave the battery out a little longer then normal, 2 minutes).
     Reconnect the BB to the computer.
     In desktop manager, verify that the BB is shown to be connected.
-If the user is using a laptop, make sure it isn't in a docking station.
     Have them take the laptop out of the docking station.
     Make sure their Outlook is still up and online.
     In desktop manager, verify that the BB is shown to be connected.
-Uninstall/Reinstall the desktop manager.
-Some other options to try if none of these work:
     Try different USB ports on the computer.
     Try a different USB cable.
The desktop manager is showing "disabled."
-Make sure that the user has gone into the desktop manager and selected options > connection settings > detect.
-Complete a hard reset.
     Disconnect the BB from the computer.
     Perform a hard reset on the BB. (Leave the battery out a little longer then normal, 2 minutes).
     Reconnect the BB to the computer.
     In desktop manager, verify that the BB is shown to be connected.
-If the user is using a laptop, make sure it isn't in a docking station.
     Have them take the laptop out of the docking station.
     Make sure their Outlook is still up and online.
     In desktop manager, verify that the BB is shown to be connected.
-Uninstall/Reinstall the desktop manager.
The desktop manager remains in "working" mode.
-Complete a hard reset.
     Disconnect the BB from the computer.
     Perform a hard reset on the BB. (Leave the battery out a little longer then normal, 2 minutes).
     Reconnect the BB to the computer.
     In desktop manager, verify that the BB is shown to be connected.
-Complete a hard reset while the BB is still connected to the computer.
     Leave the BB connected to the computer and keep desktop manager open.
     Remove the battery from the BB while it is connected.
     Re-insert the battery.
Synchronize icon is grayed out.
-Make sure that the BB is attached to the USB cable and to the computer.
-If the user is using a laptop, make sure it isn't in a docking station.
     Have them take the laptop out of the docking station.
     Make sure their Outlook is still up and online.
Synchronize option is grayed out.
-Make sure that the BB is attached to the USB cable and to the computer.
-If the user is using a laptop, make sure it isn't in a docking station.
     Have them take the laptop out of the docking station.
     Make sure their Outlook is still up and online.
Internal Errors such as: internal error #-725 (0x8004fd2b).
-Delete the Intellisync folder.
     Close the desktop manager application.
     Disconnect the BB from the computer.
     Double Click on My Computer> Local Disk (C Drive>Documents and   Settings>(username)>Application Data>Research In Motion>
   Blackberry>Intellisync.
     Note: If the Application Data folder is not present, click Tools>Folder Options at the top of the screen.
     Click the View Tab, then click on Show Hidden Files and Folders.
     Click Apply>Ok and continue through the remaining steps.
     Delete everything within the Intellisync folder.
     Launch desktop manager and attempt sync the device with the computer.
Error: "Unable to write or update application data."
-Complete a hard reset.
     Disconnect the BB from the computer.
     Perform a hard reset on the BB. (Leave the battery out a little longer then normal, 2 minutes).
     Reconnect the BB to the computer.
     Try to sync again.
-A contact in the Outlook address book is missing information or has invalid information.
     There must be a first name in the first name field and a last name in the last name field.
     Make sure there aren't any characters in the first name field or last name field (%, $, *).
-The BB does not have enough free memory to synchronize organizer data with the computer.
     Use desktop manager to reduce the range of days on the Calendar.
     In desktop manager, click on the synchronize icon.
     Click Configure Sync and select Calendar.
     Click Configure and select Advanced Settings.
     On the Date Range Tab, select one of the following options:
     Transfer all scheduled items
     Transfer only future items
     Transfer items within a range of days.
     Type a value in the Days prior to today and Days after today fields.
-Wipe the BB and re-sync through the desktop manager.
Error: "No Outlook or MS Exchange folders appear to be configured."
-Delete the Intellisync folder.
     Close the desktop manager application.
     Disconnect the BB from the computer.
     Double Click on My Computer> Local Disk (C Drive>Documents and Settings>(username)>Application Data>Research In Motion>
   Blackberry>Intellisync.
     Note: If the Application Data folder is not present, click Tools>Folder Options at the top of the screen.
     Click the View Tab, then click on Show Hidden Files and Folders.
     Click Apply>Ok and continue through the remaining steps.
     Delete everything within the Intellisync folder.
     Launch desktop manager and attempt sync the device with the computer.
-Wipe the BB and re-sync through the desktop manager.
Error: “No applications configured for synchronization.”BlackBerry Desktop Manager 4.6To configure organizer applications for synchronization using BlackBerry Desktop Manager 4.6, complete the following steps:
Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
Click Synchronize.
Click the Synchronization link on the left side of the screen, and then click the Synchronization button.
Select a BlackBerry smartphone organizer application and click Setup.
Select a desktop organizer application and click Next.
Outlook needs to be set for Address book, Memopad and Tasks.
BlackBerry Wireless Synch needs to be set for Calendar.
Select synchronization options and click Next.
If applicable, select Microsoft® Outlook® options and click Next.
Click Finish.
Repeat steps 4 to 8 for the remaining BlackBerry smartphone organizer applications.
Click OK to close the Device application window.
Click the Synchronize link on the left side of the screen, and click the Synchronize button.
BlackBerry Desktop Manager 4.2To configure organizer applications for synchronization using BlackBerry Desktop Manager 4.2, complete the following steps:
Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
Click Synchronize and click on the Configuration tab.
Click Configure synch.
Select a BlackBerry smartphone organizer application and click Choose.
Select a desktop organizer application from the Available Translators list and click OK.
Repeat steps 4 and 5 for the remaining BlackBerry smartphone organizer applications.
Choose the appropriate operation from the following list:
Synchronize – This option allows the BlackBerry Desktop Manager to synchronize updated information between the BlackBerry smartphone and the desktop organizer application. Select this option if you want to have both the BlackBerry smartphone and Microsoft Outlook reflect the changes.
Export – This option exports organizer data from the BlackBerry smartphone to the desktop organizer application.
Import – This option imports organizer data information from the desktop organizer application to the BlackBerry smartphone.
Note: For both the Export and Import operations, you will be prompted to accept changes if similar organizer data exists in the desktop organizer application or on the BlackBerry smartphone.
Click OK.
Click OK to close the Configuration window.
Click the Synchronize tab and click Synchronize now.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein

suzukisteve wrote:
Hi do you know how to stop the desktop manager opening automatically when i start up the pc.
in the Windows System tray, you should have a BlackBerry icon. click on it to invoke the window. there will be several tabs, in one of them you can untick the option to load Desktop Manager at startup.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Zenworks 7 Desktop Management on NLSBS9?

Similar Messages

Maybe you are looking for