Zenworks for Linux and SLES 9.0

Any idea when Zenworks for Linux will work on SLES 9.0?
Thanks
Ed

> On Mon, 09 Aug 2004 16:15:37 GMT, ed wrote:
>
> > Any idea when Zenworks for Linux will work on SLES 9.0?
>
> my personal guess.... oes / sp1 for ZLM 6.5
>
> but let me ask...
Any news on this topic?
I already have a SLES 9 machine up and running - waiting for
a working ZenWorks.
Greetings.
Marcel Ritter
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Similar Messages

Does sccm 2012 supports ibcm for linux and unix operating systems

folks,
does SCCM 2012 supports linux and unix operating system for IBCM ..........as per my knowledge it dont what i have learn t through bing........

I thought it's not supported for Linux and Unix, see also:
http://blogs.msdn.com/b/teju_shyamsundar/archive/2014/05/23/installing-the-system-center-2012-r2-configuration-manager-client-on-linux-part-2.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Why we have separate azure java SDK for linux and windows

I saw different links for downloading azure java SDK for linux and windows.
What difference does it actually have when java is platform independent? Or both are same jars?

Hi,
Thank you for your post.
It contains the same jar files.
Regards,
Mekh.

LabVIEW for Linux and hardware registers

Hi all,
I'm considering using LabVIEW for Linux in an upcoming project based around
PC/104. As the only way to communicate to the PC/104 module inputs is via
hardware addressing, I need to know whether it is possible to directly
address hardware in LabVIEW for Linux. If not can you suggest a way of doing
this? Also does LabVIEW for Linux and say RedHat make for a more stable
system than LabVIEW for Windows and Windows 2000/XP?
Thanks in advance.
Regards,
Shane Broadbent
- remove the 'nospam' to reply by e-mail

Hi Shane.
I know that you can address hardware in Labview for Linux: I do it with an NI6071e,k 6602 and 6503. I don't know specifically about the PC/104, but I imagine it can also be done.
Generally you can talk to the hardware registers using code interface nodes (CINs) in Labview. In the CIN you just use a 'write()' command. I don't think there's anything more to it than that. Creating the CINs is no trouble at all.
Don't know about stability of Labview with Linux compared to windows, all though others tell me stability is pretty much the same.
hope this helps and good luck!

CD different for Linux and Windows

I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

In Windows ( DIR D: )
Le volume dans le lecteur D s'appelle SAMSUNG_LBP
Le numéro de série du volume est C432-A954
Répertoire de D:\
28/02/2005 00:53 <REP> ACROBAT_READER
26/10/2004 06:11 740 AUTORUN.INF
28/02/2005 00:53 <REP> DATA
28/02/2005 00:53 <REP> ML-1610
28/02/2005 00:53 <REP> Manual
09/12/2004 03:55 11 219 SETUP.DAT
20/09/2004 07:29 270 336 SSAuto.Dll
17/09/2004 08:03 253 952 SSEtc.dll
22/09/2004 11:09 225 280 SSFcs.dll
12/03/2004 05:59 1 622 016 SSRes.dll
17/09/2004 08:04 155 648 SSTtp.dll
26/10/2004 05:42 307 200 Setup.exe
28/02/2005 00:54 <REP> USB
8 fichier(s) 2 846 391 octets
5 Rép(s) 0 octets libres
In linux (ls -l -F /mnt/cdrom)
total 44
dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
-r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
-r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
-r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
-r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
ouput of isoinfo -d dev=dev/sr0 (in linux)
CD-ROM is in ISO 9660 format
System id: LINUX
Volume id: SAMSUNG_LBP
Volume set id:
Publisher id:
Data preparer id:
Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
Copyright File id:
Abstract File id:
Bibliographic File id:
Volume set size is: 1
Volume set sequence number is: 1
Logical block size is: 2048
Volume size is: 239152
Joliet with UCS level 3 found.
SUSP signatures version 1 found
Rock Ridge signatures version 1 found
Rock Ridge id 'RRIP_1991A'
If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
total 32
-rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
-rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
This was for a Samsung ML-1610 B/W laser printer. This is crazy.
@lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
Last edited by olive (2011-09-08 12:12:16)

FormsCentral PDFs not working for Linux and Unix users

I recently created a PDF (using Indesign > Acrobat IX Pro > Formscentral [AFC]) that includes radio buttons, form fields, linked videos set to play in the PDF once clicked and (after running through AFC) a submit button.
The form has been distributed and we have already had hundreds of successful responses collected in the AFC site, all is working well there.
One major problem we are having is that we have a lot of Linux/Unix users and the response from them is that they can't activate the videos, the form fields are out of kilter alignmentwise and the submit button does not work. Even when using the proper Adobe Acrobat Reader (v9, for example).
Is the Adobe development team aware of problems such as these for Linux/Unix platforms and is there a suggested fix that they know of?
The link to the actual file is here: http://cms.iopscience.iop.org/alfresco/d/d/workspace/SpacesStore/b5a48eac-8642-11e2-8cf8-e 50acbc9fd86/NJP-Video-Abstracts-Competition-2013.pdf
Thanks in advance

Hi Jesse,
can you email me ([email protected]) the original PDF (before you imported it in FormsCentral)? Also, I'm curious about the format of the video in the PDF. Does the video in the PDF worked in Linux/Unix before going through the FormsCentral import/export?
When I look at your PDF on my Red Hat Entrprise Linux 6.0 system with Reader 9.5.4 it does look fine (location of the fields) but the video generate an error (which I'm still investigating). I have not yet try the submit button on your form (as I don't want to submit bad data to you) but I seem to have an issue with the submit button on other PDF forms I generated (when I try to submit from a linux machine). Still investigating that as well.
Gen

Detect memory leak in JNI so files for linux and Solaris

I have to find the memory leaks in the JNI for solaris and linux but the issue is
i need to find the leaks in the so files.I have solved the issues of leaks using Purify
on windows but not getting appropriate support for linux. Any pointers to tools will help.I tried Valgrind on linux but it is not giving me the exact location of leak as in purify and also the support for purify is for 32 bit only.Valgrind is not showing any functions in .so files.JNI is not supported in Purify for Solaris? Please Help.

amol28 wrote:
I have to find the memory leaks in the JNI for solaris and linux but the issue is
i need to find the leaks in the so files.I have solved the issues of leaks using Purify
on windows but not getting appropriate support for linux. Any pointers to tools will help.I tried Valgrind on linux but it is not giving me the exact location of leak as in purify and also the support for purify is for 32 bit only.Valgrind is not showing any functions in .so files.JNI is not supported in Purify for Solaris? Please Help.If you have written the JNI, the JNI itself (java calls, methods, etc) to be OS agnostic then it shouldn't matter. In that case you check the windows code (not jni), the linux code (not jni) and the jni code itself independent of each other.
If you haven't made the JNI OS agnostic the question would be why not?

Site SSL works on Chrome, Safari, and FF for Linux and OS-X, but not FF for Windows 7 (or any Android browser)

I am setting up a website with SSL: https://coalitionportelgin.ca The SSL connection works (and intermediate certificates are retrieved) in Chrome on Linux, OS-X, and Windows 7; ChromeOS; Firefox (18.0) on OS-X and Linux; and Safari on OS-X, iOS, and Windows.
However, I am still getting connection errors on Firefox 18.0 on Windows 7 and on all Android browsers, with "This Connection is Untrusted...because no issuer chain was provided."
This diagnostic tool shows the certificate chain is being pulled, but still reports "Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found."
http://www.networking4all.com/en/support/tools/site+check/report/?fqdn=coalitionportelgin.ca&protocol=https
Intermediate certificate is installed:
$ ls /etc/ssl/certs |grep GandiStandardSSLCA.pem
GandiStandardSSLCA.pem
And it is being pointed to:
$ grep -i -r "SSLCertificateChainFile" /etc/apache2/
/etc/apache2/sites-available/000-coalitionportelgin.ca-ssl: SSLCertificateChainFile /etc/ssl/certs/GandiStandardSSLCA.pem
/etc/apache2/sites-enabled/000-coalitionportelgin.ca-ssl: SSLCertificateChainFile /etc/ssl/certs/GandiStandardSSLCA.pem
/etc/apache2/httpd.conf: SSLCertificateChainFile /etc/ssl/certs/GandiStandardSSLCA.pem
For good measure, the intermediate and root certificates have also been appended to the server certificate.
I have followed all steps indicated by the cert provider, as well as other sources, and have spent hours troubleshooting this. I don't see anything more to be done. Is this a problem of server configuration (and if so, what?) or is this a problem that I can't do anything about?

Try to ask advice about web development at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Nigpib-linux-0.6 GPIB software driver for Linux and PXI GPIB board

My I use nigpib-linux-0.6 GPIB software driver for Linux in a Compact PCI system running linux and equipped with your PXI GPIB board ?
Thanks.
Paolo Santinelli.
[email protected]

If you alter the device ID of the device from c801 to c821 within the driver module, you should be able to use the driver with the PXI board.

Is labview same for linux and windows?

hi,
Right now, i am using labview 6.1 and 7.1 windows version. can i use the same windows version for linux also?

You need to get the Linux version in order to run LV on Linux. You can open and run the VIs you save in Windows in the Linux version and vice-versa, but some things are Windows-specific and will not work (for instance ActiveX, .net, toolkits which are only supported on Windows, etc.). Also, when you open your VI in Linux, LV will tell you it was changed, because the compiled code is saved as part of the VI. The compiled code for Windows and Linux is different, so when you open a Windows VI in Linux, it is recompiled.
You might wish to do a search for "Linux" to see more specific details.
Try to take over the world!

LabVIEW for Linux and DB2 Database

I am trying to write an application in LabVIEW under Linux that will
take all my data and dump it into DB2 database. I was going to use the
SQL Toolkit that National Instruments supply but they dont have a
version for Linux. Does any one knows a way around this problem to
communicate with database from LabVIEW in Linux. Thanks a lot!
Arkadiy

I did not implement it yet, but made tests which let me think that the
system is absolutly easy to implement:
Acquisition system (AS, Windows) creates data and sends it to Database
system (DS, SGI IRIX).
AS: Labview5.1, Internet-Toolkit (I think this is on Linux as well), but
not SQL-toolkit (to exansive for my needs).
DS: Usual Unix-System. MySQL Server running, database for acquired data,
User acount for AS.
AS sends a data-file via ftp to DS, connects via telnet to DS and runs a
small script to insert the datafile into the database.
Seems complicated, but in fact is very easy to implement. I will look if
I can find some of my test files, if that helps.
Greetings, Gilbert
P.S.: If you go for this solution, I will be interested if and how it
works.
Ar
kadiy wrote:
> I am trying to write an application in LabVIEW under Linux that will
> take all my data and dump it into DB2 database. I was going to use the
> SQL Toolkit that National Instruments supply but they dont have a
> version for Linux. Does any one knows a way around this problem to
> communicate with database from LabVIEW in Linux. Thanks a lot!
>
> Arkadiy

Cvi for linux and gtk+

Is there any way that I can manipulate UI window settings like titlebar visible (ATTR_TITLEBAR_VISIBLE) via GTK+ or other toolkit in Linux? Basically, I am trying to manipulate the visual attributes of the UI that are not compatible in Linux such as the titlebar visibility, minimize and maximize buttons hidden, etc...
In windows, I have used the windows SDK to create/manipulate system tray icon menus. Perhaps there is a similar approach in Linux?
Thanks for reading,
-pete
Message Edited by pshrew on 06-02-2010 12:12 PM
Solved!
Go to Solution.

Hi Pete,
After a little more research, I have found that it is possible to modify these attributes, because CVI for Linux uses the X Window System. To do this, you would be able to get a reference to the X Window System attribute by using the function int GetPanelAttribute (int panelHandle, int
panelAttribute, void *attributeValue) with ATTR_SYSTEM_WINDOW_HANDLE for the panelAttribute. From here, you could use X Window System functions to modify properties.
Best,
John M
National Instruments
Applications Engineer

Partitioning drives for linux and windows 7

I want to know if there is a piece of software that is free that can partition my drives so that I can triple boot OSX lion, windows 7 (which is currently blocking...) Linux (ubuntu puredyne).
A little bit of guidance would be much apprieciated as I have already tried fixing the partition tables MBR in the terminal and ended up disabling windows.
I know how to reinstall windows but what software can partintion the drives for linux as a triple boot?
Thanks.

Well, this is possible using Disk Utility as well as the Linux formatter. However, to triple boot will require special software: The rEFInd Boot Manager - Roderick Smith.

Administrator GW for NetWare and SLES

I now have one NetWare server that hosts MTA, POA, GWIA & WebAccess. Added a SLES 10 server that hosts the second domain MTA & GWIA2.
When I run C1 from SLES 10, I have to set the Linux mount point but that screwed me up when I run C1 from XP.
My question do users just use C1 on SLES once they have SLES server for GroupWise?
If yes, I will just VNC to the SLES console when I need to update GW.
Regards
Wilson

> When I run C1 from SLES 10, I have to set the Linux mount point but
that screwed me up when I run C1 from XP.
>
Try this http://www.caledonia.net/blog/?p=143
Danita - http://www.caledonia.net.blog

Adobe Reader 8.1.1 for Linux and Solaris released

Linux
* 32-bit Intel Pentium processor or equivalent
* Red Hat Linux WS 5, SUSE Linux Enterprise Desktop (SLED) 10 and Ubuntu 6.10. For a list of customer-reported working systems see here
* GNOME or KDE desktop environment
* 512 MB of RAM (1 GB recommended)
* Up to 125 MB of available hard-disk space
* GTK+ (GIMP Toolkit) user interface library, version 2.6 or higher
* Firefox 1.5 or higher; Mozilla 1.73 or higher
Solaris
* UltraSPARC or UltraSPARC IIIi processor
* Solaris 9 or 10
* GNOME or KDE desktop environment (GNOME only for Solaris 10)
* 512 MB of RAM (1 GB recommended)
* Up to 175 MB of available hard-disk space
* Firefox 1.5 or higher; Mozilla 1.73 or higher

Here is the list of changes and bugs I found in AR8.1.1 and ways to fix them (bugs of course :-) ):
(this is how I fixed these bugs, you may find better ways to fix them)
The most important fix since AR 7.0.9 is that now AR8 works with new Linux
distributions which use recent GTK 2.0 libraries. It is known fact that when
recent GTK 2.0 library was present loading of AR 7.0.9 failed with endless
loop of messages: "expr: syntax error" on console window and serious CPU
usage hit silently slowing down computer reactions. Now this is fixed.
New feature added: Now AR8 scans font pathes inside X config files and adds
found fonts to its own internal font cache so system wide fonts are used for
pdf pages rendering in addition to default built-in AR8 package fonts. If
user will copy font files from Windows/fonts directory to X font locations
the pdf files outlook in AR8 is identical to the one on Windows.
When someone uses tar.bz2 or tar.gz installer it will ask for installation
directory and will show default [ /opt] directory. Do not press enter here!
If you do this a ?[3~ junk directory will be created in current directory. To
overcome this manually type /opt or other location.
Another bug is blank grey window on first run of AR8. Just close it with X and
provide path to libgtkembedmoz folder. This library is a part of mozilla web
browser so it can be found in any mozilla program directory:
/usr/lib/firefox
/usr/lib/seamonkey
/usr/lib/thunderbird
/usr/lib/mozilla
or other locations where mozilla software is installed.
Just run AR8, go to Edit->Preferences->Categories->Internet->Select Browser,
and fill in libgtkembedmoz Folder path with one of these locations or find
correct one for your system.
The last bug is AR8 only creates desktop icons on root account.
AR8 can be run without icon. Just run /usr/bin/acroread

Zenworks for Linux and SLES 9.0

Similar Messages

Maybe you are looking for