Zenworks Image Failed on Multiple computers

When i try to put a windows xp pro that i built off of a optiplex 260 to a
270 it gives me a blue screen with a STOP: 0x0000007B error.

On Wed, 13 Dec 2006 21:28:21 GMT, [email protected] wrote:
> When i try to put a windows xp pro that i built off of a optiplex 260 to a
> 270 it gives me a blue screen with a STOP: 0x0000007B error.
would probably be a driver issue, did you sysprep the image before
deploying?
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Similar Messages

Zenworks imaging failed with error:200

We just got new PC's and when I try to use ZENworks 6.5 to put my image
on them, I get "ZENworks imaging failed with error:200"
I have not been able to find anything in the KB for this.
The PCs are Gateway E-4500D, ZENworks is 6.5 running on NetWare 6.5 SP 4a.
TIA

We are on SP2 and getting the error code: 200 error. The PC's are DC5100
Small form factor. They have SATA drives. Some work and some get this
error, reboot and then start the image restore, but never gets to the
Pre-Formatting. Any ideas?
> On Tue, 18 Jul 2006 14:32:30 GMT, Rhonda Richardson wrote:
>
> > No. We are on SP1. Sorry, forgot that part.
>
> could you try sp2?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
> Live BootCd and USB Disk from Mike Charles
> http://forge.novell.com/modules/xfmod/project/?imagingx
> eZie http://forge.novell.com/modules/xfmod/project/?ezie
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

SCCm 2012 R2 - OSD fails when multiple computers are getting built

Hi everyone,
I ran into a weird issue with my SCCM 2012 R2. I noticed when I build one computer with SCCM OSD, it works fine. But when I try to run more than one built at a time, only one usually works. The rest usually doesn't get apps installed in the task sequence,
some don't get added to the domain etc. Any idea what it might be? Could it be that simultaneous connections to the distribution point are getting terminated and imaging fails?
Appreciate your help!

Ok guys, this seems to be a false alarm here. It turns out I was missing a driver for ethernet card on my Dell T1600. I kicked off 3 Dell Optiplex 9020 and they all worked flawlessly. This is weird though, since I did install OS on some T1600 before and
they all worked fine...
Anyway, I downloaded the driver and added it to SCCM. I will kick off the install again today and see if that solved it.

ZENworks Imaging Loop

Sorry for posting again, but here is some more information, as well as some extra things we have tried.
Hi,
The screen results with this exit code after the workstation has been imaged, prior to booting back into PXE and then re-imaging, along with completion and the same message.
================================================== ==================
Novell ZENworks Imaging Engine v10.2.0.0
Copyright 1999-2009, Novell, Inc.
All rights reserved.
Imaging operation(s) assigned by 10.0.0.21
Elapsed time: 12:48
No more jobs to be done in policy
ZENworks imaging failed with error: 52.
Novell ZENworks SID changer for linux
Version 10.2.0.0 Copyright 2007 - 2009
Exiting: Computer has not been recently imaged
================================================== ==================
The above message occurs (and this happens to other Laptops & PCs) after the machine has been imaged, but we are still having the computer re-imaging itself, it is in a constant loop.
We were running Zenworks 7SP1 IR4. Last week we loaded Zenworks 7SP1 SR4.
My manager has rolled back to IR4, but no change, as we have computers constantly re-imaging over and over in a loop.
I have tried deleting the workstation object (name) from within ConsoleOne, and still the problem occurs. I have also made sure there are no add-on images attached to the imaging.
Notes:
Now, whenever we image a PC, the imaging process appears to finish, but we get an error: "Zenworks Imaging failed with Error:52"
The system then reboots and starts the process again. If you look at the workstation properties, the Zenworks Image tickbox has not cleared, and hence the restart of the imaging.
I found that Zenworks error 52 is: "52 - No partition type given when asked to create a part". I don't know why it would be saying that. (It is also possible that this message has always been there, but we have never noticed it, as the process has always worked).
I came across an article that suggests the "ZENworks agent on the workstation has to be the same version as the ZENworks snap-ins in ConsoleOne".
We are using:
ConsoleOne Version 1.3.6h
ZENworks Desktop Management 7.0.1 = snap-ins for configuring policy settings
ZENworks Desktop Management 7.0.1 = snap-ins for administering and managing software distributions
If you have any ideas could you please let us know?
Cheers and thanks,

anthonywhill,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Deploy OS task sequence fails when deploying to multiple computers

Hi gang,
I'm running into an issue when imaging multiple computers with MDT 2012. Let me give some background info.
I have installed Windows 7 64 bit on a laptop in audit mode, made my configurations, sysprepped the machine, and captured a .wim using WDS (captured to an external hard drive). I then imported this .wim into MDT, created a Standard Client Task Sequence to deploy
the image, and successfully deployed it to a machine.
My problem comes up when I initiate this task sequence on multiple computers simultaneously. If I put 6 computers side-by-side and run the task sequence at the same time, only a couple machines will actually succeed. The rest fail with the following:
FAILURE ( 5624 ): 2: Run ImageX: /apply "\\CAAPPWN40\DeploymentShare$\Operating Systems\T731 (Final) Windows 7 64 bit May 2013\T731 (Final) Windows 7 64 bit May 2013.wim"
1 C:
Litetouch deployment failed. Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System
Unknown error (Error: 000015F8; Source: Unknown)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operating aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015F8; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
BDD.log is saying that "The file or directory is corrupted and unreadable."
If I restart the computer, boot back into PXE, and run the task sequence again, this time on it's own (as opposed to 6 computers at once) it works fine.
Can anyone help?

I just rebooted the server and tried again, same result.
I keep getting a "Body text cannot contain links or images until we are able to verify your account" error when posting a hyperlink. I've had my technet account since October... weird.
Here's the snippet that's important:
<![LOG[ Console > [ 18% ] Applying progress: 14:47 mins remaining ]LOG]!><time="11:27:10.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 19% ] Applying progress: 14:27 mins remaining ]LOG]!><time="11:27:18.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 20% ] Applying progress: 14:15 mins remaining ]LOG]!><time="11:27:32.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\MSORES.DLL again (Error = 1392)]LOG]!><time="11:27:40.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 21% ] Applying progress: 14:06 mins remaining ]LOG]!><time="11:27:42.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 22% ] Applying progress: 13:49 mins remaining ]LOG]!><time="11:27:48.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 23% ] Applying progress: 13:29 mins remaining ]LOG]!><time="11:27:55.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 516)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:02.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:02.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 24% ] Applying progress: 13:13 mins remaining ]LOG]!><time="11:28:07.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:13.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:14.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:15.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:16.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ ERROR ] C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll (Error = 1392)]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Error restoring image.]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > The file or directory is corrupted and unreadable. ]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 2]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[FAILURE ( 5624 ): 2: Run ImageX: /apply "\\MyServer\DeploymentShare$\Operating Systems\T731 (Final) Windows 7 64 bit May 2013\T731 (Final) Windows 7 64 bit May 2013.wim" 1 C:]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
<![LOG[Command completed, return code = -2147467259]LOG]!><time="11:28:18.000+000" date="06-11-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:28:18.000+000" date="06-11-2013" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">

Network drives fail (drives used to share databases among multiple computers).

I am using databases on multiple computers to store test results for a production line. The computers share info from thier databases with each other using dsn's made with the ODBC Windows XP Admin Tool (Control Panel). This works well most of the time but occasionally one of the network drives fails - I have to disconnect and then use ODBC to make a new connection (a new dsn). Why are the network drives failing? Should I use somenthing else that is more reliable? datasocket? Shared Variable? [email protected]

Gary MavSysInc,
When you say that your program fails, are you referring to the same thing as your LabVIEW Application that is reterieving data? If so, what do you mean by it fails? Is there an error message? Does it Crash? What happens when it "fails"?
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Program to organize/edit images for multiple computers

Hi!
I have an image bank I need to organize and share with multiple computers at work. Right now, it's all sitting on an external drive where all the image files are in folders. I'd love to use Lightroom, but I understand it only works for one computer??
I would appreciate anykind of guidance and advice.
Thanks in advance!

Lightroom is a single-user application. Multiple user access on a network is not supported.
Daminion is a true multi-user application, supporting networked access. (This is not an endorsement of any kind, as I have never used it, I simply state that is has the feature you are looking for)

Multiple Computers on the same network

We're currently transitioning to Windows 8.1 MRD after many years running OSX and ARD in our small office.
We have two computers that we need to access independently from the outside. We opened up the recommend port for MRD and have it working as expected on a single computer. However, we can only gain access to a single machine from the outside. With Apple Remote
Desktop, you simply open up additional ports to allow access for multiple machines. Super easy. We decided to do the same with MRD, but failed with everything we attempted.
Does MRD not support using custom ports for multiple computers?
Thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
We can achieve the result as you want with remote desktop connection. We need to allow the port from firewall end and can apply particular rules with advanced option for specific ports. Also if you are using Routers then need to open the port from router end,
and finally when connecting user “servername:portnumber” and provide credentials.
Please checkthis article for more details.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Time Capsule with multiple computers

Everyone in our office uses macs, and we use time capsules for backing up. It seems that only one person can back up at any given time, so when one user is trying to do a backup, all of the other users have failed backup attempts because the disk is not ready.
I suppose I either need to make sure that people are backing up at different times, or is there another way around this?
Can I tell time machine a specific time I want it to back up or is it always going to be automated?

RangerJoe55 wrote:
Yeah, I posted here kinda hoping to figure out how to do more scheduled type backups instead of the seemingly random ones now.
Time machine will do backups hourly, if your Mac is awake and the destination is available. There are a few exceptions, depending on when the last backup was done, such as after waking from sleep, powering-up, or after a manual backup.
It does seem weird that it won't back up multiple computers at the same time....
It usually does. I don't recall seeing a post where it doesn't.

Syncing devices to multiple iTunes accounts on multiple computers.

I have 3 computers in my house, 2 belong to my sister, 1 is mine. Mine is very old and failing so I am probably going to get a new one. Before I do that I would like to preform a complete system restore, I hear that sometimes helps fix the bugs computers accumulate as they age. The problem is I've never done this before and I worry that I might loose valuable information. I keep everything I own on a 500GB external harddrive, so the only things that are really at risk are my Google Chrome bookmarks and my iTunes Library. Everything else I can just recover from the E-HD, but those two... I am still not sure how I can back them up. For this thread I will focus specifically on my iTunes Library though, and leave the Chrome dilema for another day (and another discussion forum).
I figured that if my old comp does go belly up I could always sync my stuff to one of my sister's computers. She mainly uses her laptop and she has told me I could use her tower to sync my iPod Touch and my iPad if I need to. I would be able to use her tower at least until I get myself a new one.
I've found several guides on how to backup the iTunes Library and metadata, and I have tried to do so. I transfer my songs and the backed up library onto a flash drive and then plug them into the new computer (my sister's comp). I drag and drop it onto the desktop, and then plug in the Touch. Oh yea, I feel I should mention something here, I'm going to try and preform a transfer of the iTouche's data first, then continue with my iPad depending on how that goes. My iPad has become my agenda, I use it for everything. And accidentally loosing all my contact/agenda info because of a botched attempt at backing up it's library is NOT an option.
So yea... I try first with the touch.
All the files are there, but when I logged into iTunes he still asked me "You need to reset this device to it's factory parameters before you can sync into this computer." Basically he needs to nuke everything on it so I can't be synced on two computers at once...
I declined the sync and tried to load up the Library I had brought over from my old comp. Problem is... he doesn't offer any option of importing a Library, in the usual spot there's only an option for exporting. Which is idiotic because this iTunes has nothing in it, it's a blank slate.
Then I tried something else, not sure what prompted it, I went on the iTunes store and downloaded a free App. And he was able to put it on the Touch... he asked me for my iTunes account info and password, and then he seemed to indicate my Touch was synced on both computers (and that I had a total of 5 computers I could sync to). The Library still hadn't transfered, since the iTunes on this comp still had no songs, but my Touch still had all 250 songs. So it didn't get wiped...
Basically my question is this. Can my devices (a 2G iPod Touch and a WiFi only 64GB iPad) be synced up to multiple computers, with my main library placed on each of these computers.
And if so, can these Libraries be continually updated with regards to one another through the internet (or at least through my home network). By this I mean, if I make a purchase on one of them, will the other Libraries be updated and get this purchase.

PTNLemay wrote:
I keep everything I own on a 500GB external harddrive, so the only things that are really at risk are my Google Chrome bookmarks and my iTunes Library.
What if that 500Gb drive fails? You need at least two copies on different drives of anything that matters, one just isn't enough.
I use SyncToy 2.1 (free) to keep my backup copies of my iTunes library and other important folders up-to-date. If there's room for the library on the internal then a single external backup is fine, but if your external holds the only copy then you should look to getting a second external drive as backup.
tt2

Imaging failed with error 175

We recently updated all of our servers with the new ZDM7NWSP1IR4HP1. We distributed the zenworks update through our zenworks for servers so we downloaded the CPK files. Updates were successful except now we have lost our reimage on next boot functionality on all servers. We get the message "imaging failed with error 175". We downloaded and tried the Zenworks Imaging Driver Update for October 2009. We tried this on one server in our environment that we use for testing purposes. This did not fix the problem.
Can anyone help us? We don't see anything additional on the support site to patch.

Originally Posted by spond
Busytech710,
could you please
1) boot to ZENworks maintenance mode
2) export DEVELOPER_LOG=a
3) perform the imaging task and send me the imglog
spond at novell dot com
Shaun Pond
I will be glad to try this and send you the log. I too tried installing the service pack with winsetup.exe and found that also worked for me as far as making image on next boot work. We really want the CPK method to work as we have so many servers and we were able to update them all in one day versus weeks using winsetup.exe. I'll respond back with info you need as soon as possible.

Using Aperture Library from Multiple Computers

My Aperture library is on an external drive and I have used multiple computers to add files to the library. Unfortunately when I use a different computer than the origin it tells me that the masters are unavailable and I cannot use the image. It tells me they are offline . Any fixes?

If you put the library entirely on the external drive then no, you won't be able to view previews when the hard drive is disconnected.
To do that, and share edits with your brother, you'll need to import and export projects. It might be possible to use referenced images, and import or export the project without consolidating masters first, if your masters are on the external drive. I think you'll just need to do some testing, and have a read of 'bagelturf's pages about how the library is organised, and how referenced images work.
http://www.bagelturf.com/aparticles/ref/index.html

Images fail to load into the browser

Hello,
Sometimes images fail to load into the browser (they show up as a red "X"). Does anyone know why? Refreshing often loads them correctly, but then a different image will not load (and show a red "X").
Thanks very much,
Andy

Hi Vikas,
Thank you very much for your help on this. I am now using a faster computer and the problem no longer happens. I did understand your suggestion - I was brainstorming ideas to make changes to APEX to account for slow computers, or computers without enough memory. To somehow guarantee a level of service for APEX applications at the end user's browser. Similar to how Oracle Enterprise manager can help guarantee certain SLAs for J2EE web applications, by monitoring performance from the browser all the way back to the disk. (I'm not sure if it 100% can do this today, but I believe this is the direct it is headed).
Well, I suppose if everyone uses fast computers this is no longer an issue. But, sometimes fast computers are hard to come by.
Thanks again for your help,
Andy

Can I setup common iPhoto library for multiple computers...

Hi -
Is it possible to have one library that is accessible from multiple computers in different locations? For example, my office Mac, my home Powerbook and our vacation home iMAC can all share the same photo library? I am downloading pictures from many different sources and in different locations and would like a centralized library.. I guess this would be the equivalent of cloud computing for iPhoto...
Thanks,
M.

Possibly. I've not used the feature but if you have a MMe account you could setup "Back to my Mac" so that two of your Macs could access the Mac designated to house the library you might be able to do what you want. It would be best to have an external FW hard drive connected to that library to house the library.
I've used an iPhoto library on my iMac from my laptop on our home WAN. But that was with Screen Sharing. Don't know if the Back to My Mac method would work.
I've used VNC to connect to my iMac from the laptop but don't know if that will let me add photos to the library there as that method has me virtually on the iMac. You could try it with a test library and one of the VNC applications. I use Chicken of VNC. You must setup Remote Management under Sharing on the host computer and install CVNC on the remote Macs. Create a test library and give it a try. Both with VNC and Back to My Mac if you have it.
If any of the two satellite Macs would be wirelessly connected that will be a problem due to occasional dropouts. If a wireless Mac was using the library and had a dropout that could damage the library's database and require some rebuilding effort which may or may not be 100% effective. That connection would also be slow.
If they are hard wired to the internet it would be much more probable that it would work as you'd like and be more reliable.
An alternative method for "syncing" the libraries (if you have a MMe account) would be to create iPhoto MMe galleries of new photos from each Mac with the option for downloading the full sized image file. Once each Mac has downloaded and imported the new photos the gallery could be deleted.

WDS Across Multiple Offices with Multiple Computers

Im trying to set up WDS to deploy windows 7 pro across multiple computers. I work in a company that installs computers for dental offices. We have a master image and at the time to prep all computers we clone that image using Acronis. Is there a better
way to do this? Also will WDS allow me to deploy images to different types of PCs. Right now our image only works on newer computer but we constantly rebuild older PC's that get infected. Can I make a master Image that allows me to deploy it to any computer?
Lastly, could I do something to be able to deploy this into our offices, if so how? Would I need to set up all those servers?

Hi JDAM-00,
Are you trying to
create the universal image, which means .create a single image and deploy to multiple hardware. You were unable to create the universal image by sysprep tool it is not supported, but you can use MDT or WDS and inject drivers in the driver
store then it's possible to deploy the image.
The related information:
Microsoft Deployment Toolkit
http://technet.microsoft.com/en-us/solutionaccelerators/dd407791.aspx
Microsoft Deployment Toolkit (MDT) Demo: Using MDT to quickly and efficiently deploy Windows 7 across your organization
http://technet.microsoft.com/en-us/edge/gg552673
MDT 2010 New Feature #19: Improved Driver Management
http://blogs.technet.com/b/mniehaus/archive/2009/09/09/mdt-2010-new-feature-19-improved-driver-management.aspx
More detail about the MDT question you can ask in the specific MDT support forum.
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Zenworks Image Failed on Multiple computers

Similar Messages

Maybe you are looking for