ZENworks Server Management 7 HP2

TID 10099903 details an issue where the relationship between an applicationicon and a linked application folder is not maintained when distributing the desktop application. As a result the application icon shows up in a folder named for the associated object (user, workstation, OU, etc).
The TID indicates that a fix will be included in "ZENWorks for Servers 7 HP2". Does anyone have any idea when this might be available?
Thank,
Jeff

You'll need to contact Novell to get a hotpatch.
Ron
"Jeff Phillips" <[email protected]> wrote in message
news:GTqGf.7841$[email protected]..
TID 10099903 details an issue where the relationship between an application
icon and a linked application folder is not maintained when distributing the
desktop application. As a result the application icon shows up in a folder
named for the associated object (user, workstation, OU, etc).
The TID indicates that a fix will be included in "ZENWorks for Servers 7
HP2". Does anyone have any idea when this might be available?
Thank,
Jeff
TID 10099903 details an issue where the relationship between an application
icon and a linked application folder is not maintained when distributing the
desktop application. As a result the application icon shows up in a folder
named for the associated object (user, workstation, OU, etc).
The TID indicates that a fix will be included in "ZENWorks for Servers 7
HP2". Does anyone have any idea when this might be available?
Thank,
Jeff

Similar Messages

Zenworks Linux Management Device Registration Issue

All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.com

On Tue, 08 Nov 2005 02:40:58 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Netware zenworks desktop management 7 RCConsole MFC applicat

I am using Zen v7. I have found that when I remote into computers, open a DOS window, try to ping an IP, after I type a few characters into the DOS window, an Windows error pops up "RCConsole MFC application problem...." IT disconnects me from the remote control.
When I try to reconnect, i get a 1805: this app is currently being performed on the target machine and will not be available.
This seems to only happen on DOS windows and Green screen mainframe applications like WRQ Reflections.
Anyone have a fix for this. Searching Forums and Google have similar problems but no fixes.
Thanks

continued
<MATCHING_FILE NAME="ZenComp.dll" SIZE="61440" CHECKSUM="0x91118A87" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="ZENworks Remote Management Compression File" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZenComp.dll" INTERNAL_NAME="ZenComp.dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x3" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:31:16" UPTO_LINK_DATE="05/18/2005 11:31:16" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="zenmouse.dll" SIZE="53248" CHECKSUM="0xB39F50" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Zenworks Cursor Shape change grasping file" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="Zenmouse.dll" INTERNAL_NAME="Zenmouse.dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x3" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:33:11" UPTO_LINK_DATE="05/18/2005 11:33:11" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="ZenRem32.exe" SIZE="163840" CHECKSUM="0xACE9CD5F" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Novell ZENworks Remote Management Agent" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZenRem32.exe" INTERNAL_NAME="ZenRem32.exe" LEGAL_COPYRIGHT="Copyright 1999-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x3" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="07/11/2005 06:03:31" UPTO_LINK_DATE="07/11/2005 06:03:31" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="ZRmResLd.dll" SIZE="65536" CHECKSUM="0xDF3EC861" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Novell ZENworks Remote Management Resource loader" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZRmResLd.dll" INTERNAL_NAME="ZRmResLd.dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:30:14" UPTO_LINK_DATE="05/18/2005 11:30:14" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\rmcomres.dll" SIZE="16384" CHECKSUM="0xE9995AD7" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0,0" FILE_DESCRIPTION="RmComRes.DLL" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="RmComRes.DLL" INTERNAL_NAME="RmComRes.DLL" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:34:24" UPTO_LINK_DATE="05/18/2005 11:34:24" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\sftplg32.dll" SIZE="45056" CHECKSUM="0xDB30B415" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7.0.0.0" FILE_DESCRIPTION="FTP resource file." COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENWorks for Desktops Remote Management " FILE_VERSION="7.0. 0.0" ORIGINAL_FILENAME="Sftplang.rc" INTERNAL_NAME="Serving FTP" LEGAL_COPYRIGHT="Copyright (C) 1999 - 2005 Novell Inc., All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/18/2005 11:19:28" UPTO_LINK_DATE="05/18/2005 11:19:28" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\ZenRmAdt.dll" SIZE="53248" CHECKSUM="0x98DF6654" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="ZenRmAdt" COMPANY_NAME="Novell Inc." PRODUCT_NAME="ZENworks Remote Management" FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="ZenRmAdt.dll" INTERNAL_NAME="ZenRmAdt.Dll" LEGAL_COPYRIGHT="Copyright 2001-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/23/2005 09:04:31" UPTO_LINK_DATE="05/23/2005 09:04:31" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="nls\English\ZRm32Res.dll" SIZE="36864" CHECKSUM="0x1F08852" BIN_FILE_VERSION="7.0.0.0" BIN_PRODUCT_VERSION="7.0.0.0" PRODUCT_VERSION="7, 0, 0, 0" FILE_DESCRIPTION="Remote Management Agent resource bundle" COMPANY_NAME="Novell, Inc." PRODUCT_NAME="ZENworks Remote Management " FILE_VERSION="7, 0, 0, 0" ORIGINAL_FILENAME="zrm32res.dll" INTERNAL_NAME="zrm32res.dll" LEGAL_COPYRIGHT="Copyright 1999-2005 Novell, Inc. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="7.0.0.0" UPTO_BIN_PRODUCT_VERSION="7.0.0.0" LINK_DATE="05/23/2005 09:05:09" UPTO_LINK_DATE="05/23/2005 09:05:09" VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
<EXE NAME="kernel32.dll" FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="989696" CHECKSUM="0x2D998938" BIN_FILE_VERSION="5.1.2600.5781" BIN_PRODUCT_VERSION="5.1.2600.5781" PRODUCT_VERSION="5.1.2600.5781" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft Windows Operating System" FILE_VERSION="5.1.2600.5781 (xpsp_sp3_gdr.090321-1317)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT=" Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xFE572" LINKER_VERSION="0x50001" UPTO_BIN_FILE_VERSION="5.1.2600.5781" UPTO_BIN_PRODUCT_VERSION="5.1.2600.5781" LINK_DATE="03/21/2009 14:06:58" UPTO_LINK_DATE="03/21/2009 14:06:58" VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>

ZENworks Asset Management 7.5 - Eval Question

We've been trialing several products and on the ZENworks Asset Managment
evaluation we ran into a few problems.
We run a mostly Mac shop. There are a handful of Windows machines and
plenty of Linux (Redhat & Debian) servers to go around.
I've gotten it all installed and installed the client on one of the OS X 10.5
machines. I see the zamclient running but I'm not even seeing the client
attempt to connect via the Collection Servers -> View Detailed Status window.
In the About ZENworks Asset Management withing the manager it has
license information listed as below.
Workstations 1
UNIX/Linux Workstations 0
Asset Inventory Evaluation
Asset Management Evaluation
UNIX/Linux Evaluation
Does that mean it will only find one workstation in evaluation mode and
that's why my other workstation with the zamclient installed won't show
up?
Thanks in advance,
-Chris

Originally Posted by blcald
Chris,
1st see that the machine conducted an inventory locally on the client. Program files/Novell/Asset Management/bin/Inboxcc/longfilename ending with a wif extension. This doesn't address your issue yet but determine if the client even ran an inventory.
Next run a workstation query with no criteria to see if it shows. If it doesn't I would validate if you have the correct port settings on the client and that it is communicaiton to the collection server. The collection server will aslo have a log (something like collsvrcore and you should see the machine name in there as it talks to the client. If you're in there then determine if you have rights between the DB and collection server correct or that the port settings are correct.
I know this better actually doing than writing it here so others might provide you a more logical approach to troubleshoot. I will check in again later to see how you progressed.
Thanks, Bryant
I do appreciate your response, I'm sure all of that information will come in
handy when I do get a good evaluation license from them that allows Linux
and UNIX support.
I finally reached some folks at Novell and got a little bit of pre-sales support.
From the sound of what they're telling me the evaluation license does not
turn on the linux/unix support and so I couldn't complete my evaluation
with it due to that. I've been working with them to get a more functional
evaluation.

Zenworks mobile management activesync with datasynchronizer

Can I point zenworks mobile management server at the datasynchronizer as an activesync for auto enrolment?

Georg,
Option A seems to work reliably today with Exchange 2007 so as long as the DataSync team properly implements the settings request for email address provided in the ActiveSync 12.1 protocol then it should work reliably. As for B today if the device doesn't support 12.1 or the server doesn't support 12.1 as is the case right now the only approach we currently have is to strip off the domain from the email address and attempt authentication as the user specified in the email. We are working to see if there is some other approach we can take once we provide additional LDAP enhancements in the next version of the product. But for now the two options you identified in our long term solution are the knowns. I'll forward this thread on to both the DataSync team and the ZMM development team and see if we can all come up with some better ideas.
Thanks,
Jason
>>> Georg Fritsch<[email protected]> 8/9/2012 1:24 PM >>>
Hi Jason,
Thanx again for the detailed and competent anwser.
All this restrictions unfortunately mean that hands-off enrollment is going
to fail for many setups. (including us)
A requirement that the local-part of an email address has to match the
username is ridiculous. (Yes, we all know that Exchange 2003 and ActiveSync
2.5 are ****...)
I am not sure if understand the long term solution:
A) If a user gives just a username, the device must get the corresponding
email address from the ActiveSync system. Available with protocol version
12.1. Fine. (As long as the device uses protocol version 12.1)
B) A user gives an email-address, the username must be derived from the
local-part. Where/How?, local-part == username is an invalid assumptionand
the device does the parsing and just returns the local-part as username to
the ActiveSync system. (And this information is IMO not enough to find the
real username)
Or is B) not allowed (or a really bad idea/design decision) as A) does
reliably work?
Georg
>>> Jason Blackett<[email protected]> schrieb am 09.08.2012 um 05:35 in
Nachricht <[email protected]>:
> The problem with 1.2.3 is that when you authenticate to the domain with
> the following credentials:
>
> user : bob
> domain : m.comp.com
> server : zmm.comp.com
>
> That the ZMM product currently relies on the activesync provider to tell
> it Bob's email address. If it doesn't receive one then the iOS active
> sync account it creates ends up with an email address of
> m.comp.com\[email protected] which seems to work fine for getting
> email/calendar but not for sending email. This only occurs if you do
> hands-off enrollment because as TASNovell points out the email address
> attribute doesn't get populated in the user, but is a required field when
> creating a user.
>
> The ActiveSync way to fix this is that ActiveSync has to allow the user
> to authenticate with their email address [email protected] for instance. And
> then when it parses that it sends back the username as bob and uses the
> full email address. This is the same capability provided by Microsoft
> Exchange 2003 which implements the same version of ActiveSync as DataSync
> currently. There definitely will be issues if the username portion of the
> email address is not the ActiveSync user account name. In that case hands
> off enrollment will fail and you will have to manually create the account
> or import it from the directory and set the email address attribute.
>
> The long term solution is that DataSync will move to the 12.1 version of
> the ActiveSync protocol which provides a settings call that the agent can
> make to retreive the email address from the ActiveSync system if the user
> didn't provide one. However this is going to take some time. So in the
> short term the datasync team implemented the Exchange 2003 like
> capability allowing user authentiction with email address and then
> parsing the username. This capability will be part of 1.2.4. This issue
> is documented in the ZMM Server Release notes
> (http://www.novell.com/documentation/.../zen_mobile_se
> rver_relnote.pdf) as follows:
>
> "12. Systems where iOS users are interfacing with a Novell GroupWise
> DataSync server must use
> DataSync Update 4 (Mobility 1.2.4) to fully utilize the hands-off
> enrollment functionality. Users need to
> enroll using their entire email address in lieu of their username if
> they are enrolling by the hands-off
> method. Similar processes must be followed to use hands-off enrollment
> when users interface with
> Exchange 2003 or any other mail server running ActiveSync 2.5 protocol.
> A user's username and the
> string of characters to the left of the @ sign in their email address
> must be the same."
>
> Jason
>
>>>> TASNovell<[email protected]> 8/9/2012 8:26 AM >>>
>
> feeling a bit silly not reading the version number. We are running
> datasync v1.2.3.3xxx. ZMM seems to connect fine. Email flows correctly
> to the ios devices through the delivered profile. The only thing that is
> not imported is the email address into the newly created user in ZMM. I
> assume this should be pulled through from LDAP as you have to set the
> attribute up during install.

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Hyper-V Server Manager -Error occurred during enumeration of Data Deduplication volumes

Hi Experts,
I having this problem in my Hyper-V Server Manager. Can somebody tell me why this happening? Inside my Hyper-V, I has been installed Microsoft DPM 2012 and both Hyper-V is cluster. Please advice.

Hi Tyler,
I had the same problem until I unlocked (BitLocker) the HDD causing the error message.

SAP Server Manager Error after BPC installation on domain controller

Hi, I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . I think that the application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users).
Thanks

Hi
I have the same issue that you had.
"I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . The application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users)."
Can you please let me know how you solved this ?
thanks & regards
Lokesh

Can't Open Server Manager - don't have System Administrator Rights

Hi,
I am new to BPC
After i updated the support patch to BPC 7.5 MS SP3 , pack level 2
and Restart the server
Then Server Manager can't open again.
Error Message :
This ID (xxxxxx) don't have System Administrator Rights; you must log on with a user ID that has system administrator privileges
But I have logon the user which is used to install BPC
I have try to restart the service, but it is not working .
Any method reset it ? or solve it?
thx
John

Dear Kong Chong Shun,
From your information, I'm sorry I could not get several information. Did you upgrade your BPC Clients too, lets say BPC Administrators ?.
Kind Regards,
Wandi Sutandi

Server Manager Error, Windows Server 2012 Standed

Windows
Server 2012 on my desktop
and I've been in it then
open Server Manager "ServerManager.exe - This application could not be started"
error this time. In it,
the option is YES and
NO. YES is open
to the side of .net.
Please help me as soon as possible.

Hi,
Please check the event viewer to get more detailed error information about this issue.
You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
I hope this helps.

Server Manager error 0x80070422 - Roles and features are not accesible

Hi
I cannot view Roles and Features in Server Manager on my Server 2008 R2 box. The error is:
Unexpected error refreshing Server Manager: The service cannot be started, either because it is disbaled or because it has no enabled devices assicaited with it (Exception from HResult: 0x80070422)
I have looked at my services - but don't know what service to look for, everything seems to be in order.
After some investigation on the net, I understood that I need to setup the win readiness tool, I did and the output in CheckSur file is as follows
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 12.0
2011-05-31 19:02
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the actual
file name
(fix) CBS MUM Corrupt CBS File Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
(fix) CBS Paired File CBS File also Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 4058
Found 1 errors
Fixed 1 errors
CBS MUM Corrupt Total count: 1
Fixed: CBS MUM Corrupt. Total count: 1
Fixed: CBS Paired File. Total count: 1
Here again, it seems that everything is fine.
Thanks in advance for your help

Hi,
Please try to install Windows Server 2008 R2 Service Pack 1 directly and check the result. Service Pack 1 for Windows Server 2008 R2 includes all the
previous released Windows Updates and hotfixes.
If it does not work, you will need to copy these files from another working Windows Server 2008 R2 system to replace the corrupt ones.
Otherwise, you will need to perform an In-Place upgrade to repair the system.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to install SQL Server Management Studio 2012

Hi ,
I was trying to install MS SQL Server Manager on Server 2012 R2 and I was facing an issue while doing so.
Please find the attached screenshot for the same.
Need help ASAP.
Thanks

Hi Mahesh,
Could you please install the Microsoft Windows Software Development Kit (SDK) as dave’s post? Below is the download link for the latest release of SDK.
https://msdn.microsoft.com/en-us/windows/desktop/bg162891.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Unable to Login SQL server management studio:sql server 2005

Hello All,
I am unbale to login SQL server management studio with below scanario:
Server Type:Database Engine
Server Name:XXX
Authntication:Windows Auth
After enter "Connect : button below eeror is displaying
Error:"Canot connetc to XXX server
Additional information:
Attempted to read or write protected memory .This is an often an indication that the other memory is corrupt(System.Data)
Note:Database is connecting R3trans return code 0000
SAP is working fine
Please provide suggestion and inpuits its very urgent
Thanks
Nekkalapu

HI All,
Issue resolved after rebooting the server.
Thanks
Nekkalapu

How to change Font Size of Object Explorer in "SQL Server Management Studio"

Dear Team,
"SQL Server Management Studio" is a fantastic IDE for the database.
There are so many customization options available but one thing many users missing is that " How to change Font Size of Object Explorer?"
Can you please accumulate this feature in IDE ASAP?
Many Thanks,
Bhavesh

Its there
Go to Tools -> Options
Then under Environment you've fonts and colors tab where you can specify a higher font size.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

ZENworks Server Management 7 HP2

Similar Messages

Maybe you are looking for