Zero elimination into the export datasource

Hi gurus!
I have the following problem:
1) In the Infocube 1 I have a export datasource and this provider receives data from a FLAT FILE;
2) In this FLAT FILE I have 19 records. One of them has all key figures as zero value;
3) When I load this FLAT FILE into the Infocube 1 receives all records (total of 19);
4) I have the Infocube 2 that receives data from Infocube 1 (via export datasource);
5) When I load data from Infocube 1 to Infocube 2, I miss the record with all KF as zero value. I receive only 18 records.
Does anybody know what is happening?
Note: This behavios is like the zero-elimination on compress data.
Thanks in advance,
Silvio Messias

Hi,
check if your record exist in your Source ICube.
If yes (and you don't filter your extraction) then the extractor is not considering the records having all key figs = 0.
If not then then check whether you have routines having RETURNCODE <> 0 in TRules or URules...
strange...
Olivier.

Similar Messages

DSO activation failed due to creation of the export datasource failed

hi experts,
i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
please advise, thanks!
attach error info:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
The delta process ODS does not exist
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZFIM_D09

Hi,
As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
Regards,
Durgesh.

Transport Error-The creation of the export DataSource failed

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.

No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_BID
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_QUO
/     The creation of the export DataSource failed
      User not authorized. Session terminated
      User not authorized. Session terminated
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0PUR_DS03
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)

The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02

Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).

Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren

Error in transporting ODS(Error when creating the export DataSource.......)

Hi All,
 When I try to transport ODS from dev to quality i m getting the following error.
DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object XADDR1

 XADDR1 is my ODS. BQ1CLNT355 is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
Please Suggest solution,if any body encountered same problem. It is very urgent for me.
Regards,
Ramana.

Hi
You generate export datasource once again
Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
Hope this helps
Reg
N Ganesh
assign points if useful***

Function module names to delete the Export Datasource

Hi Experts,
Can anyone please let me know what function modules are while deleting the export datasource. So far in my research i have found only
RSB1_DELETE_EXPORT_DATASOURCE. -- This fm does not deletes the export datasource, I want to know which fm is used exactly to delete the datasources.
To delete the virtual infocubes, the fm used is RSDG_CUBE_DELETE. Similarly there must be a fm to delete the export datasource.
Please help.
Thanks,
Prashant.

Hi Reddy,
I hope there is no specific function module to delete the entries ( as of version 4.0). So you need to code a delete statement to perform the task.
Thanks,
Siva.

The creation of the export DataSource failed

Dear All,
Can u give me the some information to fix the following error which i got while moving Multicube from Dev sys to Prod. sys. multi cube consits of lot of ODS object as dependent objects.
Error FYI.
The creation of the export DataSource failed
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object 0CRM_CN2P
Regards,
Veeru.

Hi Srinivas,
If itz SS problem i can able to transport the other objects like cubes, Info Obj.. etc. only while transporting the ODS obj it is showing
can u help me on this.
any way i wil chk with basis team and ask to reset PWD.
Regards,
Veeru.

ODS activation error( The creation of the export DataSource failed

Hi Friends,
i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
1.The creation of the export DataSource failed
2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
3.Error when creating the export DataSource and dependent Objects
Any help would be appreciated
Thanks

Seems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
cheers,
Vishvesh

Migration 3.x data source to BI 7 run into problem - Export Datasource

Dear Expert,
I have got a problem with the data source replicated from BW 3.5 into BI 7.
The details are as below:
- I replicated the BI 7 for a data source 8ZRAC_DSO from BW 3.5
- after replication, the version of data source remain as Modified
- I am not able to activate
- In order to activate it, I try to perform the migration with the option of 'with export'
- I got stuck with the error message as below:
'Export DataSource 8ZRA_DSO (BIPCLNT100) in myslef system object type RSDS not possible'
Do you have any suggestion to resolve this problem?
Is it a right way to get the data source activated?
Thanks and appreciated.
Arthur

With 7.0 export datasources are obsolete. And the system doesnt allow you to do the migration. Instead you would need to create a transformation between the Original DS/Infosource to the Target.
Example -
Updating data from ODS to Cube
Right click on Data store object-> create transformation ->give the target cube name->give the load option either full or delta-> activate the transformation and load data from ods to cube by clicking execute in third tab
DTP required between DSO and Infocube to handle DELTAS.
Edited by: sam hennry on Mar 21, 2008 3:25 PM

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

I subscribed to Adobe Export PDF and cannot get into the program without paying again. What's up. I paid 23.88 for a annual subscription

I need help getting into the Export PDF program. I signed up for the annual subscription of 23.88 on the 9th of Sept. and today cannot get in unless I pay again.

Hi firemedic01,
I checked your account (using the email address you use in the forums), and I don't see any order history for you. Is it possible that you used a different email address to sign up?
Best,
Sara

Are Export DataSources always 3.x format? Can they be migrated to 7.0 DTP?

Hi,
I am extracting for a BW Export DataSource into a cube. It seems that when you generate an Export DataSource, the DataSource in 3.x format.
I first created the ETL using the 3.x scenario.
i.e Export DataSource->Transfer Rules->InfoSource->Update Rules->Cube
I then wanted to move the DTP for improved efficiency and so created a new 7.0 InfoSource and built the 7.0 scenario
i.e Export DataSource->Transformation->7.0 InfoSource->Transformation->Cube and all works well.
I'm now trying to remove the 3.x scenario, but it causing problems because the Export DataSource remains 3.x.
If I try to delete the 3.x DataSource, it wants to remove dependent objects (which are both 3.x & 7.0 scenarios).
If try and migrate the 3.x DataSource to 7.0 (Rightclick: Migrate), it gives me an Error Message no. RSDS163 - Export DataSource 8AUEQUIPMTM(CBW230ALE) in myself system: Object type RSDS not possible
I can't find anything on OSS, but I suspect Export DataSources are not supported in the 7.0 format as yet.
As such, I am required to leave 3.x scenario intact to process the 7.0 scenario.
This isn't a great problem, but it is a little messy and confusing for the person administering the loads.
Can anyone tell me if it possible to make an Export DataSource into 7.0 DataSource?
Many thanks
Adrian

Hi,
when needed, you can indeed convert datasources from v3.5 to V7, and back, using transaction RSDS. Choose "with export". This "saves" the "other" version, and so it can be "restored" afterwards via RSDS again.
This is also true after DS replication from a sourcesystem, when the system asks whether you want the new replicated DS to be 3.X or V7. Either you choose, you can convert afterwards if needed.
Regards
hugo vandenabeele
senior BW consultant

Problem while generating an Export DataSource in our Productive BW system

Hi all
We are trying to generate an export data source in our productive system and for any infocube and we are getting the error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'." please see the following steps to reproduce the error, for ODS's everything it's working just fine
In the attached document, you will see he error
Best Regards,
BW Team
Steps to Reproduce the error
Please follow the next steps in order to reproduce the error:
1. Logon into BW production system
2. Go to TX RSA1
3. Find infocube "XXXX"
4. Right bottom on your mouse, go to "Additional Functions" and then select "Generate Export Data Source"
5. You will get the following error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'."
The error is only happening with infocubes, for ODS's everything it's working just fine.
We already check several notes and in RSA1 the "Transport Connection" --> "Object Changeability" and everything seems to be OK, we used to do it but "something happened" and we cannot do it anymore
a"

Hi Ramanjaneyulu
Thanks for your soon response, we are trying to do this in order to copy data from our productive system to our quality system for testing purposes
We have a SAP 730 and SP08 so the note does not apply because we already have it
The problem it's only happening with infocubes and no loads had been executed in the system during this process; for ODS's we can generate the export datasource without any problem
thanks
Carlos Deciga

Urgent *Please help* Export Datasource - Depedencies

Hi All,
I have generated export data source and loading the data from one BW system to another.
Can anyone please tell me, what are the dependencies, i need to make sure and check for this process.
Thanks,
Nisha

Which version are you in. Well something you need to look at is that the data is currently loaded into the target on which u have the export datasource.
Also, if you have some lookup then see that has been loaded in that target also.
Hope this helps.

How can i retrieved data into the infocube from archived files

hi,
i have archived cube data and i have to load data into the cube from archived files.
so now i want to find archived files and how to load data into the cube.
thanks

Hi.....
Reloading archived data should be an exception rather than the general case, since data should be
archived only if it is not needed in the database anymore. When the archived data target is serving also as a
datamart to populate other data targets, Its recommend that you load the data to a copy of the original
(archived) data target, and combine the two resulting data targets with a MultiProvider.
In order to reload the data to a data target, you have to use the export DataSource of the archived data
target. Therefore, you create an update rule based on the respective InfoSource (technical name 8<data
target name>). You then trigger the upload either by using Update ODS data in data target or by
replicating the DataSources of the MYSELF source system and subsequently scheduling an InfoPackage
for the respective InfoSource
If you want to read the data for reporting or
control purposes, you have to write a report, which reads data from the archive files sequentially.
Alternatively, you can also use the Archiving Information System (AS). This tool enables you to define an
InfoStructure, and create reports based on these InfoStructures. The InfoStructures define an index for
the archive file data. At the moment, the archiving process in the BW system does not fill the
InfoStructures during the archiving session automatically. This has to be performed manually when
needed.
Another way of displaying data from the archive file is by using the Extractor checker (TCODE RSA3).
Enter the name of the export DataSource of the respective data target (name of the data target preceded
by 8), and choose the archive files that are to be read. The extractor checker reads the selected archive
files sequentially. Selection conditions can be entered for filtering but have to be entered in in internal
format
It will remain same in the change log table.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b32837f2-0c01-0010-68a3-c45f8443f01d
Hope this helps you...........
Regards,
Debjani............

Zero elimination into the export datasource

Similar Messages

Maybe you are looking for