Zero infront of zipcode getting cut off, need help

Not showing full zip code – I put in 07753 and it shows 7753 (missing the 0). Thank you for your help!
Here is my code:
var v7 = this.getField("ShipTo");
var v1 = this.getField("ZipPostal Code").value;
var v2 = this.getField("ZipPostal Code_2").value;
if(v7.value == "0")
    if(v1.length === 0)
      v1 = "";
    else
      v1 = this.getField("ZipPostal Code").value;
event.value = v1;
else if(v7.value == "1")
     if(v2.length === 0)
            v2 = "";
     else
            v2 = this.getField("ZipPostal Code_2").value;
event.value = v2;

You need to get the value of the field using the valueAsString field property:
var v1 = this.getField("ZipPostal Code").valueAsString;
var v2 = this.getField("ZipPostal Code_2").valueAsString;

Similar Messages

  • HT201322 Okay, I am starting to get realy ****** off. need help please.

    I've spend almost a full day trying to find a song "Death Will Reign by Impending". I purchased the song already but it is not in my itunes library, It's not Hidded, It's not in the Purchase List under quik links and there's no download option for it either. I've been searching for the song I purchased and it's not even on my Laptop PC. I do have a store receipt of purchasing it. $1.40 is the total. I saw all the technical support and not one of it can't help my to get this song that I purchase. I bought and it just got erase. I did a system recovery and it is still not there but I still have the purchase item. I did not have Icloud till after this problem. Is there ANY way I can get this song? to make it clear, IT"S NOT ON MY PC. the file for it or anything. I do not have a viruse or spyware or malware. It is not hacked. I know for sure of it. Can anyone please help? I will really appreciate your help.

    First try Store > Check for available downloads in case it is in some sort of limbo between purchase & delivery.
    Occasionaly the iTunes interface can seem to lose track of a recent purchase, even though it is in the library...
    Try creating a smart playlist with the rule Name contains Death Will. Does the track show up? If so I can suggest ways to fix the general problem.
    tt2

  • I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off.

    I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off. What do I need to do to get the entire text to be printed. Any help is appreciated.
    Thanks

    What has this to do with Pages? You probably did this in Preview.
    Peter

  • What size should my movies be to not get cut off?

    I am making a tutorial DVD. I used Snapz Pro to record a bunch of screen capture movies and then edited them together in FCP and exported them as 1024x768 animation movies and they look great. Now I want to burn them to DVD. When I take them as they are and put them on a DVD the top and bottom of the screen get cut off. Can I just resize the movies in QT pro to a different size so they won't cut off? If so what size? Is there a better way?

    Scott,
    A mix of this QuickTime Pro: How to Make Picture-in-Picture at http://docs.info.apple.com/article.html?artnum=42633 and the following procedure I put together a couple of years ago to use the small movies produced by still digital cameras in iMovie/iDVD:
    1. Create a 640 x 480 black mask with a slightly lighter black 320 x 240 center in Photoshop. Save it as a JPG file.
    2. Open your DiMage X movie in QuickTime Pro. Open the saved mask in another QuickTime Pro player (at 15 fps).
    3. Select the mask clip and edit->select all and then edit->copy
    4. Select the DiMage X clip and then edit -> add scaled the mask
    5. Next, select movie -> get movie properties
    6. Select video 2 on the left box and layers on the right box. Set the layers to 1 (that moves the mask to the back).
    7. Select video one on the left box and size on the right box. Click on adjust. Red hack marks appear around the video. Click on the picture (not the mark) and center the video on the lightened 320 x 240 box.
    8. The video may not completely cover the lighter box, but the hack marks should line up. When you view the movie, if you used a "slightly lighter" black for the center area, you won't a notice a lighter area when played in iDVD.
    9. Export it as a DV stream. Bring it into iDVD.
    will give you an idea on how to proceed. Obviously, you will need to come up with your own mask and cut-out size - 640x480 ISN'T what YOU want.

  • Tops of Signatures get cut off...

    Can anyone tell me why or, better yet, how to fix the following issue I keep having?
    When using Adobe Reader and the "Sign>I Need To Sign>Place Signature" function with "Signature Style 4" the top of some of the letters of signatures gets cut off (see screenshot below). 
    I cannot find a way to rejustify the text nor am I able to enlarge only the box that the text is located in.  The single enlarging feature for the box is a diagonal enlargement tool which inherently also enlarges the text when it is used.  So it defeats the purpose of what I'm trying to fix and only makes the issue into a larger size.
    Any assistance in correcting this issue is greatly appreciated!
    --CR4

    There are several situations where this could happen.
    1) If you have 4:3 footage (standard def) in a 16:9 project (widescreen) and select CROP in the Rotate, Crop, Ken Burns Tool, then it will cut off the top and bottom of your clips to make them fill the screen. If you select FIT instead of CROP, it will letterbox (add black bars) so you see the whole clip.
    2) This can also happen when you automatically apply image stabilization. Stabilization works by zooming in. You can turn off stabilization in the Clip Inspector.
    3) If you have iPhone clips and the iPhone was held vertically, then this will be an issue for you, because iMovie always sets the aspect ratio to match a TV screen, so the horizontal dimension will always be the longest. For best results, shoot all movies in landscape mode on your iPhone. If you have already shot in Portrait Mode, I suggest using FIT rather than CROP so you do not cut off the heads.

  • I got a text saying that if I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my accoun

    I got a text saying that I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my service from being cut off?

    As it was pointed out making prior arrangements could of helped extend the time you need to get your account back in order..
    But if you have to have the phone and its the only thing you have to make calls, I would try other means ( Family, Friends, or other )  to get the rest of the balance payed and you can pay at a Corporate store using the stores Kiosk machine.!   You can pay with Cash, Credit or I think with a  check  but using a check I'd ask the Local store how the policy is on that..
    Hope that Helps.!  Good luck..

  • DVD video gets cut off, but preview shows dvd as good

    Having a problem getting my video to output from dvd burning without getting cut off.
    Computer is Win xp pro, 3gb ram, 2.33ghz cpu, 40gb free hd space
    Using Adobe Premiere Elements 3.0.2.
    I have video which I've recorded from my Sanyo xacti 720p avc camera, which records in mpeg4 format. I've converted the video(s) to mpeg 1,2 for dvd using my "Need4 Video Converter 5.9". At first I tried putting several mpeg1's into my premeire project, then I also merged all the video files into one, but still had the same problem.
    I put the video(s) into my premiere project, added some titles on the other video track. Also added some music on another audio track. So, the total size of the videos is about 3.5gb. I preview my project it looks great, I added some dvd scenes and used a nice template with scene selection and captions..the works. Now I try to burn it several ways, to a dvd, to a file folder on high or low settings, but everytime I only end up with about 1.5gb of data, and 25 mins of video, so it is cut off. My original video is an hour and 50 mins.
    The encoding takes about 3 hrs after I hit burn. No errors or anything.
    So, I cannot understand what I need to do. I don't want to convert to a smaller or lower format, bcz I dont' want to lose quality. I'm at a loss bcz I've tried so many different formats and combinations, let this stuff run for so many hours this past weekend, and still can't get it to work. Is there some kind of setting I'm missing? Something in premiere?
    I've read some best practices on the forum, and I understand to use bit rate of 7mbs or less, and to burn on slow speed. Is it at all bcz I'm burning it to my hard drive? but i don't think this is my issue. is it the old software? it came with my Sanyo camera, so I would think its good enough.
    Please help if you can. I was thinking my next shot might be to convert it down to a much smaller size, and maybe it will fit(but quality may be an issue). Thanks in advance. -Ron

    Ron,
    Yes, PE is a scaled down version of P-Pro, but also has some additional features, plus an easier way of doing many things, that its "big brother" does not. As to the ability to Export/Share frame sizes, I think that most are included in PE (would have to open each and explore precisely to tell you if it's all there). I do not think that this is your issue.
    As to the conversion, I'd step back to your original footage, Sanyo MP4, right? Unless Sanyo is using a proprietary CODEC to create the MP4's, you *should* be able to Open these files in QuickTime and play them. If you have QuickTime Pro (costs about US$30 to upgrade to "Pro), you *should* be able to Export and choose DV-AVI as your Export setting. Note: the term ".AVI" can mean so very many things. What you want is DV-AVI. This is the "native" format for PE - what it converts all other file formats to, to edit. The quality loss going with this format can be measured in a lab, but is almost totally impossible to see on any TV with the human eye. Doing this will likely enhance your entire editing experience.
    As for quality and conversions and compression, your camera has already done one conversion, when it wrote to MP4. You cannot get around that. Conversion to DV-AVI will be "virtually" lossless, though the file size WILL increase. The reason is that with MP4, not all "frames" exist with full content - part of its compression. With DV-AVI each "frame" will exist with full content. Be prepared for LARGE files, but files with all of the info.
    Then, when you Burn to DVD, you WILL recompress your data to MPEG-2 format, the DVD standard. You will loose some quality there, but it cannot be avoided. It is how DVD's hold their Audio & Video data.
    I still do not have any ideas that would directly affect your movie not burning completely. If the Duration of your movie has exceeded the capacity of a DVD-5, you would/should get an error message to that effect. You do not.
    One thing to go back and look for in your original Project's Timeline would be "gaps" in the Video. These can cause problems (or sometimes not). I zoom my Timeline way up, and use the PageUp & PageDn keys to "step" through the various Clips. The CTI (Current Time Indicator - that little doobie that marks where you are on the Timeline) should move in a linear fashion from Clip to Clip. If you see it pause, or hiccup, then zoom WAY in to the max and study the Timeline there. Are all Clips butted up to each other? Now, you can have Clips on Video Tracks above #1, that would allow you to have "gaps" in the Video on VT 1. That is OK, but if you have any spots on the Timeline, where there is NO Video, you'll likely want to fix these. You can close up the gaps by moving the Clips, so that they do butt up, or if you want "black" there, just go to the New icon and choose Black Video. Size it to fit the gap, and you will be fine. You can also extend the Clip before the gap, or after the gap, if that does not mess up your editing. Several choices and each should be based on what you want to have happen. If you find a bunch of gaps (even one can be deadly) try to Export/Burn again. Note: I've seen one 1-frame gap cause problems, but just had to re-edit a Project where I fixed 900+ gaps, and that Project had already Burned 4 DVD's. Go figure.
    Last thing to look at would be to hit the "\" key in Timeline mode. This will zoom out to show the full Timeline. Do you have anything stuck out by itself, past where you thought the end was? This should yield other problems, but not the one you are experiencing. Still, who knows? It's also a good thing to do, when you believe you are done, just to check that something didn't get "orphaned" out beyond where one normally looks on the Timeline.
    Good luck,
    Hunt
    [Edit] 01:50 is longish for a DVD-5. You will not be able to set a very high bit-rate (Quality slider), but you should still get the full Timeline, or an error message.

  • Why do my margins get cut off when I right click print, but not when I open my document and print?

    When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine.  This only happens when the document has print that is close to the edge.
    I am using Adobe 10.1.2 with Windows 7.
    Thank you in advance for your thoughts and help

    As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

  • Text problem - will not run on...gets cut off

    I need my text to appear to the right hand side of an image, so on the left of the screen is the image, and to the right is the text.
    Is there an option to make the text run on, underneath itself? It keeps running along and gets cut off the edge of the screen!

    yeah, just hit 'enter' when you want a line break. it's not like MS Word where it breaks when you hit a margin. once you are done typing your text you can center it or make it left or right adjusted.
    Message was edited by: budakhan

  • Submenu getting cut off

    Hi i am a newbie to flash i one of my frnd bought the menu from flashden website here is the test forum
    http://nitro.byethost14.com/
    the menu submenu gets cut off and is within that black region can anybody tell me how to make it come out of the black region i contacted few ppl in other forums they siad to change the html code used for the flash menu
    note:- i even used the wmode="transparent" it did not work.
    Thanks in advance
    please contact me at [email protected] for any further details abt the site

    kambrozewicz wrote:
    I am having problems with being disconnected from calls (it has happened 4 times) due to having no Skype credit, when my account has plenty of credit. I am paying for an account with 'unlimited' calls.
    Whats happening here?
    If Skype is warning you about not having Skype Credit to place the call, you may be calling numbers not covered by your subscription.  Not all subscriptions cover calls to all numbers in a particular country.  In many countries, landline numbers are the only numbers covered by subscriptions.  To better answer your question, we would need to know what subscription you have, and what number you are trying to reach (you could X out the last few digits of the number for privacy, but we'd need to know the country, city/area code, and what type of number this would be).
    Otherwise, you could contact Skype Customer Support, give them the specifics of your subscription and the number(s) you are trying to reach, and let them help you out. 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Internet Keeps Getting Cut Off

    Hi
    This is driving me insane and my dad wont listen to me, but maybe he will if he heres someone say something who knows about it.
    Every so often, usually every day if not more than once a day I get cut off from the internet on my Mac Mini (G4) for 5 - 10 minutes at a time. I have no idea why this is happening, and from what I have seen it only seems to be affecting my computer on the home network.
    I am using a NETGEAR DG834N router and my Mini is the only one connected to it via ethernet the rest are wireless. We are also with Pipex as out ISP and I'm running 10.5.5 on my Mini.
    Hope thats enough information so that you can help me, I would really appreciate it very much, and if you need anymore info I'll post back.

    I mean that I cant connect to any webpage over that time, through Safari or any other browser. I cant do anything which needs to be connected to the internet.
    How would Id o a ping test? And how would that help me find why this is happening?
    Thanks...

  • Songs keep getting cut off

    Most of the longer songs on my ipod get cut off at the end. I did the five 'R's and that didn't fix it. If I delete the song's and re-rip the cd on to the hard drive and sinc the ipod, that fixes the problem, but I have a ton of songs that are cutting off and don't want to have to re-rip all of my jazz cd's! I noticed that itunes will display the wrong time on a song if I jump to the end. It will count down to zero before the song has ended, but unlike the ipod, it plays the song after the time has displayed zero.
    Please help!
    Thanks.

    By any chance are the songs that you are having issues with encoded using Apple's AAC format? I have an ongoing issue with my ipod in that songs encoded with AAC (whether purchased or ripped) will skip to the next song at a random point in the song. If the song is encoded in .MP3 format, then I don't have a problem.

  • When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari.

    When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari. Has anybody else had this problem?

    I'm using pure HTML5 for mobile websites although you need to provide an OGG file for Firefox. See the movie page on this site...
    http://mobile.ezmacwebdesign.com/
    If you don't have an iPhone, grab the browser handle and drag it to the left to reduce the width to see how it responds to mobile devices' fixed width browsers .
    This will play in all modern browsers and on mobile devices. You can use QuickTime Pro for the OGG or OGV conversion or get the freeware Miro Video Converter...
    http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
    If you only want to upload an MP4, you can use a flash fallback player and this will cover Firefox and those geriatrics that still use older versions of Internet Explorer....
    http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
    http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
    If you use any of the four fallback players above, take advantage of the fact that you can add a poster image and stop the video file from preloading. This makes for a faster page download time.
    You can also achieve this using HTML5 by adding preload="none" and poster="URL to the poster image" into the code shown on this page...
    http://www.iwebformusicians.com/Website-Movie-Video/HTML5-Video.html

  • Bottom margin gets cut off when I try to print

    bottom margin gets cut off when I try to print

    Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
    If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
    Also go to HP and check if there is a newer printer driver if yours has some years on it.
    I hope this will help you

  • I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off

    I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?

    Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
    When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
    Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
    Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
    Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins.

Maybe you are looking for