Zero records in delta update

Dear All,
In HR :Time management (Time and Labour )(cube)  0PT_C01 two data sources are there  and one is 0HR_PT_1 , during delta load it does not get any recors and it will show zero records at cube level and in r/3 rsa3 ir shows new records.Please suggest how to solve this issue.
Regards
Albaik

Hi,
This is because you havent run the init load till now.
We have to run a init load before running delta(one time process).
now as you have selected init with datatransfer, you got all the records transferred.
from next time, no need to run init and you can proceed with delta.
Cheers,
Srinath.

Similar Messages

  • Zero records in Delta Queue for Non-LO Datasource

    Hi,
    I have a process chain which loads data daily and last loaded on 5th of this month which is a delta load to DSO, and then I have triggered process chain on 10th  and now the process chain got successful but delta is returning zero records. I have gone through the Delta queue monitor, in that the data source is showing 0. what could be the reason for this? The data source is a Generic data source built on View and it is not a LO data source and delta is on timestamp.
    Thanks,
    Karan.

    Hi lokesh.
    Repair Full delta option it wont distub existing deltas.....
    repair full delta put full update indicate request as repair request.
    Via the Scheduler menu we can indicate a request with full-update mode as Repair Full Request. This request can be updated into every data target even if the data target already contains data from an initialization run or delta for this Data Source/ source system combination, and has overlapping selection criteria.

  • RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

    Dear Professionals,
    I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

    Hi,
    Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
    MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
    It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
    Check also these SAP Notes:
    869628     Constant WAITUPDA in SMQ1 and performance optimization
    728687     Delta queued: No data in RSA7
    527481     tRFC or qRFC calls are not processed
    739863    Repairing data in BW
    Rgds,
    Colum

  • Delta Loading -Zero Records Only-- Why?- Please Answer

    Helo Gurus,
    I have created one generic data source on a custom created table and put counter field as delta field. This table is populated by running one pgm.
    Then I replicated the data source into BI and created initialisation and pulled data to PSA. Then from there to DSO and to Cube.
    Then I run the program for another date and populated the table in R/3 with new 200 records. Then I created another InfoPackage in BI and put the update as Delta and scheduled immediately. <b>But it pulled 0 records</b>. <b>Why?</b>
    Whether we need to delete the initialisation load from PSA before loading delta to PSA?
    While creating Generic delta field (counter) , I put lower limit as 10 and checked the field additive delta.

    Pallavi,
    The program is populating the table. initial count was 15788. So after running the program for different date the count becomes 15801.
    While Initialisation I pulled 15788 into PSA and then to DSO and then to cube. Then I run the program and made the count to 15801. Then I checked in RSA3 and is pulling 15801. Then I created Infopackage for delta update and scheduled teh same immediately. But pulling 0 records.
    As you told I checked in RSA7. Its showing in the total field 0. But in the stat field when clicked its showing count as 15801. I went inside the delta update and repetition, its showing zero entries.
    I had given lower limit of 10 as the field counter is numeric

  • Delta update for deleted records

    Hi,
    I use delta update for my data. As destination I use ODS object and this ODS contains two keys: key1 and key2. On step of preparing data for extraction, key2 is lost(we can't determine it) - key1 is known only.
    I'm finding a way how to update ODS by deleted records('D' update mode) if this records contain only key1 value(key2 is empty). I need to delete all records with key1 only, key2 is not important for this update.
    Is it possible to set key2 some BW specific value, which will be accepted as equal for old key2 values ?
    Or some other standart ways are known for this situation ?
    Thanks in advance,
    Fiodar.

    I would use the update rules to read the active data table of the ODS. There you can read all the key2 values for a given key1.
    If you get one row with key1 filled and key2 = '*' (for example you could split it into multiple records, one per key2. A sample coding might look like:
    LOOP AT DATA_PACKAGE into l_d_data_package.
      IF key2 = '*'.
        DELETE DATA_PACKAGE.
        SELECT * FROM /BIC/AMY_ODS00 INTO l_d_my_ods
          WHERE key1 = l_d_data_package-key1.   
          l_d_data_package-key2 = l_d_my_ods-key2.
          append l_d_data_package to DATA_PACKAGE. 
        ENDSELECT.
      ENDIF. 
    ENDLOOP.
    Best regards
       Dirk

  • Delta fetching zero records

    Hi all,
    the delta load for a master data infoobject runs daily at 5.00PM.
    on 30th June, the load failed due to invalid character.
    as there was no one to monitor the load on saturday, it remained as it is.
    on 1st July, the delta ran again and fetched the same no of records and failed with the same error.
    on yesterday(2nd July) when we came, we saw the error and corrected the load which ran on 1st July.
    Yesterday,the delta load again ran on 5.00PM.but we had to kill this job due to some reason.After killing i manually changed the status to red though it became red.
    But with today's load it fetched 0 records with the message"no updates since the last delta"
    Delta update in the monitor shows"Repeat of last delta".
    so,have i lost any records in this process?how do i know if there were any records or not?
    <b>observation:</b>
    in R3 in table BWOM2_TIMEST the last delta entry is that of 30th.
    Any useful help will be rewarded
    Regards
    Dhanya.

    if i correct the 30th load, and again request delta ,will it bring all records from 30th?
    Yes... it shoudl bring data from 30th.
    yesterday i corrected the 1st July load and then when 5.00PM load ran ,i had to kill the job.But with today's load it fetched 0 records.
    is the 1st Load set tp green and Loaded in BI?
    Nagesh Ganisetti.
    Assign points if it helps.

  • Delta update data error. Can we do a full load with bad records?

    Hello,
    We are working with SAP BW 7.0. And we had a problem with a delta update. It has made the delta update correctly, however, a register is loaded incorrectly, when this register was correct in the source system.
    We just made a load of that record and now we have it right in the master data. But we must now update the InfoCube. The data came up with a delta load, and now to load only this record we must make a full load (with only 1 register), then in the infocube make a delete selection of the wrong record.
    The problem is that we have doubts about how this would affect the load delta, because loads are scheduled for each day and then lost as the source of where to start the next load and we have problems with delta loads the next few days.
    Thank you.

    hi,
    What is your delta extractor (LIS or not LIS), What is you target (DSO or cube).
    depending on your soruce and target procedure is not the same but you can do it in every cases :
    in case of not LIS
    just reload with full IP to PSA
    in case of LIS
    delete setup tables
    do a restructuration for your record (if you can with selection condition)
    in case of cube in BW
    do a simple full upload
    in case of DSO
    do a full upload in repair mode (if dataflow is 3.x) else just use DTP.
    But if your target is DSO and DSO load other infocube after be sure that they are not corrupted
    Cyril

  • Deactivate delta update before deleting the request from ODS

    Hi all,
    Happy New Year wishes to all.
    I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
          I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
    “Request 98888 already retrieved by data target BWVCLNT”
    “Delta update in data target BWVCLNT must be deactivate before deleting the request
    “Do you want to deactivate the delta update in data target BWVCLNT?
    So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
    “Delta request is incorrect REQXXXXXXX in the monitor”
    “A repeat needs to be requested”
    “Data target still include delta request REQXXXXX”
    “If the repeat is now loaded, then after the load”
    “There could be duplicate data in the data targets”
    “Request the repeat?”
    After execute changes it is showing only “zero” Records only.
    What is that mean and why zero records it is displaying instead of delta records.
    Anybody faces this type of problem please let me know. This is somewhat urgent to me
    Thanks and Regards
    Satish Chowdary

    <i>Hi Satish,
    First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
    I hope this helps.
    Thanks,
    Krish
    Dont Forget to assign Points.</i>
    Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

  • Get back the Data mart status in ODS and activate the delta update.

    I got a problem when deleting the requests in ODS.
    actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
    - the request 132185 already retrived by the data target BP4CLT612.
    -Delta update in BP4CLT612 must be deactivated before deleting the request.
    - Do you want to deactivate the delta update in data target BP4CLT612.
       I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
    in the same it happened inthe 3 ODS's(3rd level).
    I got clear that if we load further data from source system. it will load all the records from starting.
    so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

    Hi Satish,
    U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
    Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
    Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
    To correct this..
    To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
    Do similar from L2 ODS to Cube.
    then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
    see below thread..
    Urgentt !!! Help on reloading the data from the ODS to the Cube.
    cheers,
    Vishvesh

  • How can i correct a delta update?

    Hi ALL,
    i have a delta update in an InfoCube that is failed the 28/07/2007 the processing is a procedure to load data from yesterday (27/07/2007) (after that date all deltas was finished correctly) i don't have an error message, in the status tab of the monitor i have: short dump in the warehouse, diagnosis: The data update was not completed. A short dump has probably been logged in BW providing information about the error.
    my problem is: there is a query bex based on a multicube that return no applicable data found and this cube is a part of the multicube.
    when i click on the manage menu on the cube in the Requests tab on the second column i have: Request for Reporting Available and in this column i have the query sign that request is availble for reporting until the date where i have the failed delta load. (i don't know if there is the problem affected my query Bex)
    one time i have seen somebody that was corrected a delta fail going in the monitor status tab clicking on the red light and after he set the set Overal Status to red (status not ok) but when you click save you get another popup ask you: set all updated requests in the ICs to this QM status?
    i'm blocked in this step because i'm afraid to make a many troubles in the Cube and i don't know if i choose yes if it will affect all the requests after my failed delta request.
    can Someone help me please???
    Thanks in Avance
    Bilal

    Hi Amit,
    1) the datatarget is being feed by one datasources.
    2) after the RED request in the data target i have 5 green requests, they use PSA and update subsequently in Data targets, but when i have checked the PSA today
    i see that i have only the data for yesterday and today.
    i don't have reference in PSA for the load that have failed 28/07/2007
    About the RED request:
    1) i don't have reference in the PSA for that request
    2) in the monitor of that request i have 661682 from 661682 Records
    when i check the Header tab in the monitor i have the processing: From PSA into data targets and the update mode: Full update
    when i click on the infopackage i have the processing tab: Only PSA and update subsequently in Data targets, the update tab is full update...i don't know why they give the name MA DELTA for the infopackage.
    i have deleted the RED request and the system had put automatically the next green requests like available for reporting ....i execute the query in this time return data but without value for the june's months ...i don't know if i have make a mistake to delete the requests or no!!!
    somebody have opinions
    thanks Bilal

  • 0fi_ar_4 INIT returning zero records

    Hi gurus,
    0fi_ar_4 INIT is returning zero records while loading into ODS.I have checked in RSA3 it is returning zero records with INIT selection but is it is fetching records with Full update.Can ne one tell me what to do.how to solve this problem.
    rgds,
    ***Points Assured**

    Hi Suravi,
    Check at the Info Package selection-- Init with out data transfer.
    Make it with data transfer..
    Hope it helps..

  • 0FI_AR_4 extractor bringing zero records

    Hi,
    We are using extractor 0FI_AR_4 as delta. At times it is bringing zero records but the next time it brings data along with the daata missed the previous day.
    For ex
    Monday it brought records until previous week
    Tuesday it brought zero record
    Wednesday it brought more records i.e including records created on Monday and Tuesday
    We could not figure out a situation when can this happen. But our observation is that there is no entry for tuesday in the table BWOM2_TIMEST.
    BWOM_SETTINGS
    BWFILOWLIM     19910101
    BWFINSAF         3600
    BWFISAFETY     1
    BWFITIMBOR      020000
    DELTIMEST         60
    OBJCURTYPE    10
    Regards
    Vijay

    check http://help.sap.com/erp2005_ehp_04/helpdata/EN/af/16533bbb15b762e10000000a114084/content.htm
    it states :
    In delta mode, data requests with InfoSource 0FI_AR_4 and InfoSource 0FI_AP_4 do not provide any data if no new extraction has taken place with InfoSource 0FI_GL_4 since the last data transfer. This ensures that the data in BW for Accounts Receivable and Accounts Payable Accounting is exactly as up to date as the data for General Ledger Accounting.
    you can check this...de link gives details about the delta methods for FI extractors

  • Delta update for 0FI_AR_4 DataSource

    Hi Experts,
    We have a couple of reports (Infoprovider ODS) which are based on the 0FI_AR_4 DataSource. We have enhanced the Datasource and added 7 to 8 fields from SD and FI region. For enabling delta current mapping is: UPDMOD (R/3) field mapped to 0RECORDMODE (BW).
    One of the enhanced FI field is Collection Specialist. If this Collection Specialist Master record is changed for a particular Customer, all the newly generated  Accounting Document shows the current Collection specialist but the already existing Accounting Document in BW are not getting converted to the current Collection Specialist.
    Enhancement Code for 2 fields:
    1. SELECT SINGLE KLIMK FROM KNKK INTO V_KLIMK
             WHERE KUNNR = l_s_dtfiar_3-KUNNR AND KKBER = l_s_dtfiar_3-KKBER.
         IF SY-SUBRC = 0.
             l_s_dtfiar_3-ZZKLIMK = V_KLIMK.
         ENDIF.
    2. CLEAR: WA_UDMBPSEGMENTS.
        SELECT * FROM UDMBPSEGMENTS INTO WA_UDMBPSEGMENTS
                                   WHERE PARTNER = l_s_dtfiar_3-KUNNR.
        ENDSELECT.
        IF SY-SUBRC = 0.
            SELECT * FROM UDM_SGMT_COMP INTO TABLE IT_COMP_CODE
                                   WHERE COLL_SEGMENT = WA_UDMBPSEGMENTS-COLL_SEGMENT.
            LOOP AT IT_COMP_CODE.
              IF IT_COMP_CODE-COMP_CODE = l_s_dtfiar_3-BUKRS.
                l_s_dtfiar_3-ZZCOLL_SPECL = WA_UDMBPSEGMENTS-COLL_SPECIALIST.
              ENDIF.
            ENDLOOP.
         ENDIF.
         CLEAR   : IT_COMP_CODE
    Please suggest what can be done to resolve the issue.
    Thanks,
    Vivek

    Hi,
    I hope you have written the codes in R/3 side.And whenever the Collection Specialist Master record is changed for a particular Customer, all the newly generated Accounting Document show the current Collection specialist but the already existing Accounting Document in BW will not converted to the current Collection Specialist since the data in BW is old data and no logic is written to convert the same.
    Try to incorporate the logic to convert in BW also.
    I could suggest is whenever there is change in Collection Specialist Master record , try to trigger a delat record generation that updates the old accounting doc withnew master in the delta load.
    Ramesh

  • How to Delta Update in Flat Files

    Hi all,
    I would like to know is delta update is supported in flat files ? If yes how does this work ..... is there a SAP white paper or document on this
    Thanks
    Nathan

    Hi......
    Yes Delta upload is supported by Flat files..........In this case........when the delta data records are loaded by flat file......... This delta type is only used is 'F'.......for DataSources for flat file source systems. Flat files are imported to the PSA when you execute the InfoPackage. The staging process then begins.........The delta queue is not used here.
    As Siggi already told in the Following thread......post your flatfile data to an ods object with update mode overwrite. The ods object will do the delta for you then.........
    Delta Upload for Flat File
    Also Check this.......
    SAP NetWeaver 7.0 BI: Data Transfer Process with “Only get Delta Once”
    SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / The “Normal DTP” ...
    Hope this helps........
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Nov 12, 2008 9:40 AM

  • 2LIS_02_S896 issue : Records are not updated into BW

    Hi
    ->We use 2LIS _ 02 _ SCL extractor to pass PO's to BW with delta.
    ->Works fine until the last week ,
    ->But on a particular date ( 15.05.2007) some of the records are not updated in BW.They are even not found at PSA level itself
    ->For eg for a material X there are two entries found in R/3 ( MB51 ) for the same posting date, now one of them is picked in BW (PSA level ) and other is not.
    ->There was no load fail / delta fail in BW and there is no exit written for this.
    ->Records are not updated in RSA3.
    Let me know how this issue can be fixed.Its urgent.
    Thanks,
    Jilani

    Hi Gagan,
    Kindly check if you have any selection restrictions in your infopackage.
    Regards.

Maybe you are looking for