ZFD 4 Agent using ZFD 3.3

Has anyone successfully tried using the ZFD 4 Agent on a server environment
running ZfD 3. We are currently exploring upgrade possibilities. During a
test install of ZFD 4 on an XP box, we get a NAL error stating that we have
to upgrade the client. Any suggestions

In general this will work.
The primary issues is that Workstation Import will not work.
1) You can Extend the Schema for ZFD4 w/o impacting your current
environment in any way.
2) You can setup a Workstation Import server on a new Box to service the
ZFD4 Agents. You can configure the registry on these Agents so they
point to this import server instead of the one used by the ZENWSIMPORT
DNS entry that is used by your ZFD3 clients.
If possible, I would strongly suggest going with ZFD7 in upgrade
scenarios for better support. Of course if you own ZFD4 and do not have
upgrade protection I can understand why you would stick with 4.
[email protected] wrote:
> Has anyone successfully tried using the ZFD 4 Agent on a server environment
> running ZfD 3. We are currently exploring upgrade possibilities. During a
> test install of ZFD 4 on an XP box, we get a NAL error stating that we have
> to upgrade the client. Any suggestions
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN

Similar Messages

Policy agent using https redirect to AM for authentication

We are using Access Manager 6 2005Q1.
Access Manager is running on box A & box B using the Sun Web Server as its front end web server. Box A & B both have a complete install of Sun Web Server, Access Manager, and Directory Server. The Directory servers are set up to replicate changes between each other. Our Policy Agents are running on box C & box D under the Apache web servers.
Users will access applications on box C/D via https. The policy agents on box C/D should redirect the user to box A/B (via a load balancer VIP)for authentication. The redirect will be https. Once authenticated the user should be redirected back to box C/D.
All subsequent communications between the Agents on box C/D to AM on box A/B (via load balancer VIP) are http.
Our load balancer is currently setup as active/failover because it does not support ssl with cookies.
In our AMAgent.properties file if I set 'com.sun.am.policy.am.loginURL = http://<lb-vip>:80/amserver/UI/Login' and access box C/D as https://<webserver>/<url> I am redirected to AM on box A/B for authentication. Once authenticated I am redirected back to box C/D and allowed access to <url>.
However, if I set 'com.sun.am.policy.am.loginURL = https://<lb-vip>:443/amserver/UI/Login' and access box C/D as https://<webserver>/<url> I am NOT redirected to AM and receive 'Forbidden You don't have permission to access /<url> on this server. Also in the agent log file I see:
     2006-01-30 12:42:30.792 Debug 28126:203470 PolicyAgent: in_not_enforced_list():enforcing access control for https://<webserver>:443/<url>
     2006-01-30 12:42:30.792 Debug 28126:203470 PolicyAgent: am_web_is_access_allowed https://<webserver>:443/<url>S, GET) no sso token, setting status to invalid session.
     2006-01-30 12:42:30.792 Debug 28126:203470 PolicyAgent: Policy Agent: am_web_is_access_allowed returned status=invalid session
     2006-01-30 12:42:32.800 Warning 28126:203470 PolicyAgent: am_web_get_redirect_url() unable to find active Identity Server Auth server.
     2006-01-30 12:42:32.800 Info 28126:203470 PolicyAgent: do_redirect(): Status Code= invalid session.
Interestingly if I set 'com.sun.am.policy.am.loginURL = https://<am-server>:443/amserver/UI/Login' and access box C/D as https://<webserver>/<url> I am redirected to AM on box A/B for authentication. Once authenticated I am redirected back to box C/D and allowed access to <url>. In this scenario the only difference is I am bypassing the load balancer.
Our networking people have monitored the load balancer in front of our AM boxes A/B and see the traffic going to AM in all cases.
From my standpoint it appears the agent is not able to successfully connect to AM via https when going through the load balancer.
Any help with this configuration issue is appreciated.

Bernhard,
From our AMAgent.properties... com.sun.am.policy.agents.version=2.1. Is there a way for me to tell if this is truely only 2.1 or 2.1-xx?
Because our LB does not support SSL with cookies we are currently configured as active/failover so all requests are going to the same AM server until it goes down, at which time I know users have to re-authenticate. Also we have set "com.sun.am.loadBalancer_enable = true" in AMAgent.properties.
We understand your point about loginURL. Infact there are two properties dealing with loginURL, com.sun.am.policy.am.loginURL and com.sun.am.policy.am.library.loginURL. Based on the comments in AMAgent.properties my understanding is that com.sun.am.policy.am.loginURL is where the user is redirected for login when no valid SSO token is found and com.sun.am.policy.am.library.loginURL is what the agent uses to authenticate itself "If the previously specified login URL must be exclusively used for redirecting users..." The interesting part is that if we set com.sun.am.policy.am.loginURL to use http everything works just fine, however if we set it to use https the user never gets redirected. Its almost like the agent is trying to connect there first before doing the redirect and can not.
Craig

To deinstall Grid Agent using response file

HI.
I have installed Agent on Oracle 10g using response file but now need to uninstall.
I need to uninstall since after deleting old Agent home the response installer is complaining that I need to remove everything from old Agent home
I have searched the same Oracle doc that I used to do the install, but can see no info on how to remove.
ANy ideas much appreciated thanks.
I should add that the original Agent Home has now been completely removed. yet when I run this
./runInstaller -silent -responseFile /u01/app/oracle/solaris_x86/response/additional_agent.rsp
The following response is returned:
Initializing Java Virtual Machine from /tmp/OraInstall2010-06-25_10-21-17AM/jre/1.4.2/bin/java. Please wait...
$ Please specify a Unique Oracle Base directory, or remove previously installed products and their directories. Directory name should contain only valid alphanumeric characters, including '_', or '.' characters.
SunOS
DO I need to update the OraInventory ?
Edited by: user11981168 on 25-Jun-2010 02:22
Edited by: user11981168 on 25-Jun-2010 02:27
I have already removed everything from the Agent home (at OS level) but get error:
Starting deinstall
No products selected for deinstall
Yet still cant start the install....
Edited by: user11981168 on 25-Jun-2010 08:01

Depending on the agent version you can use the /runinstaller (without response file) as described here
http://download-uk.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/deinstalling_agent.htm#DAFEEBEG
If you want to install the agent using:
a- the same oracle home name and/or
b- the same directory
you have to delete the "old agent" home from the inventory. This can be done by "detaching" the home you want to remove.
See http://samiora.blogspot.com/2009/01/fixing-registering-oraclehomes-in.html
Eric

ODI 11g Agents using OPMN in Windows 2008 R2

Hello,
Has anyone tried installing ODI agents in 11g using "odi_opmn_addagent.bat" script?
If yes, then please share some pointers.
We are able to start agents using 'agent.bat' script and it serves the purpose.
Instead of keeping a cmd window open for agent, we want to install that as an opmn service.
ODI 11g Install guide talks about opmn agents in Appendix I section.
But reality is that odi_opmn_addagent.bat in ODI_HOME/oracledi/agent/bin directory is not working for us.
Thanks.

Hiren created another agent , port in ODI is 20910, still cannot start it:
Processes in Instance: EPM_epmsystem1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
INTERFACE2 | odiagent | N/A | Down
INTERFACE | odiagent | 0 | NONE
Essbase1 | EssbaseAgent | 628 | Alive
C:\Oracle\Middleware\user_projects\epmsystem1\bin>
<ias-component id="INTERFACE2">
- <process-type id="odiagent" module-id="CUSTOM">
- <environment>
<variable id="ODI_HOME" value="/Oracle/product/11.1.1/Oracle_ODI_1\oracledi\agent" />
<variable id="JAVA_HOME" value="/Oracle/Middleware/jdk160_11" />
<variable id="ODI_MASTER_DRIVER" value="weblogic.jdbc.sqlserver.SQLServerDriver" />
<variable id="ODI_MASTER_URL" value="jdbc:weblogic:sqlserver://bbags2sqld2:1433;DatabaseName=BBA_CRS_ODI_MST;selectMethod=cursor" />
<variable id="ODI_MASTER_USER" value="site_crs_des" />
<variable id="ODI_MASTER_ENCODED_PASS" value="b9yXeQkghOwh1RKyqjazX9xrr" />
<variable id="ODI_SECU_WORK_REP" value="HYP_WORKREP1" />
<variable id="ODI_SUPERVISOR" value="SUPERVISOR" />
<variable id="ODI_SUPERVISOR_ENCODED_PASS" value="b9yXeQkghOwh1RKyqjazX9xrr" />
<variable id="ODI_USER" value="$ODI_SUPERVISOR" />
<variable id="ODI_ENCODED_PASS" value="$ODI_SUPERVISOR_ENCODED_PASS" />
<variable id="ODI_JAVA_HOME" value="$JAVA_HOME" />
<variable id="ODI_INIT_HEAP" value="32m" />
<variable id="ODI_MAX_HEAP" value="256m" />
<variable id="ODI_ADDITIONAL_JAVA_OPTIONS" value="" />
<variable id="ODI_ADDITIONAL_CLASSPATH" value="" />
<variable id="ODI_JAVA_EXE" value="$ODI_JAVA_HOME/bin/java" />
<process-set id="odiagent" numprocs="1">
- <module-data>
- <category id="start-parameters">
<data id="start-executable" value="$ODI_JAVA_EXE" />
<data id="start-args" value="$ODI_JAVA_START_OPTIONS oracle.odi.Agent $ODI_REPOSITORY_PARAMS -PORT=20910 -NAME=INTERFACE2 -JMXPORT=21910" />
</category>
- <category id="restart-parameters">
<data id="restart-executable" value="$ODI_JAVA_EXE" />
<data id="restart-args" value="$ODI_JAVA_START_OPTIONS oracle.odi.Agent $ODI_REPOSITORY_PARAMS -PORT=20910 -NAME=INTERFACE2 -JMXPORT=21910" />
</category>
- <category id="stop-parameters">
<data id="stop-executable" value="$ODI_JAVA_EXE" />

ORA-28511: lost RPC connection to heterogeneous remote agent using SID=%s

Hi,
Please Help to relsove below issue:
I am using Oracle gateway for Sql Server 11.2 on Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi, on a IBM Power p595 AIX 6.1, SQL Server 2008
When I run a query the first time, it runs perfectly. After some time, I try to run it again and it displays the following error: lost RPC connection
09:44:09 SQL> select count(*) from GSUP_ATRIBUTO@SQLPRD;
COUNT(*)
73
09:48:48 SQL> /
select count(*) from GSUP_ATRIBUTO@SQLPRD
ERROR at line 1:
ORA-02068: following severe error from SQLPRD
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.20.8.28)(PORT=1521))(CONNECT_DATA=(SID=SQLPRD)))
09:49:05 SQL> /
COUNT(*)
73
In the gateway trace file we can see:
Oracle Corporation --- FRIDAY MAR 09 2012 09:51:04.140
Heterogeneous Agent Release
11.2.0.1.0
HS Agent received unexpected RPC disconnect
Network error 1003: NCR-01003: NCRS: Read error.
Gateway initSQLPRD.ora file
# This is a customized agent init file that contains the HS parameters
# that are needed for the Database Gateway for Microsoft SQL Server
# HS init parameters
HS_FDS_CONNECT_INFO=[ipSQLSERVER]:port//
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
Gateway Listener
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=SQLPRD)
(ORACLE_HOME=/home/oracle/app/oracle/product/10.2.0)
(ENV="LD_LIBRARY_PATH=/home/oracle/app/oracle/product/10.2.0/dg4msql/driver/lib:/home/oracle/app/oracle/product/10.2.0/lib")
(PROGRAM=dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ipGateway) (PORT = 1521))
SQLNET.INBOUND_CONNECT_TIMEOUT=0
My tnsnames.ora file
SQLPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = ipGateway)(PORT = 1521))
(CONNECT_DATA =
(SID = SQLPRD)
(HS = OK)
Alert log message in Oracle Server:
Fri Mar 09 09:48:47 GMT-03:00 2012HS: Lost RPC connection to remote Agent...
HS: ... Agent SID = (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ipGateway)(PORT=1521))(CONNECT_DATA=(SID=SQLPRD))), NCR status = -2147385340
Please help

Hi,
It looks like the gateway connection has been closed for some reason and then you have tried to use it again in the same session which gives the ORA-28511.
There is a default gateway timeout but that is 20 minutes, whereas you are seeing problem after about 4 minutes and the listener timeout is set to 0.
Do you have any timeout settings configured in sqlnet.ora ?
Regards,
Mike

ORA-28511: lost RPC connection to heterogeneous remote agent using

hi,
I have configured dblink between Oracle and sqlserver using "Oracle Database Gateway for SQL Server" method.
i am following the below listed documents
ID 437374.1---How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11 on Linux
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31042/configsql.htm
All the steps have done and listener, tns also working fine. but, retrieve the data from sqlserver its shows following error.
SQL> select from "demo"@slink;*
select from "demo"@slink*
ERROR at line 1:
ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erpdev01.4iapps.com)(PORT=1511))(C
ONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding line from SLINK
Process ID: 25158
Session ID: 298 Serial number: 5602
System Details:
Oracle Database :
OS : Enterprise Linux Enterprise Linux Server release 5.2
DB Version : 11.1.0.7.0 Enterprise Edition Release
Oracle Database Gateway for SQL Server version : 11.1.0.6.0
Sqlserver Database :
OS : windows xp
DB Version : sql server 2005 express edition
kindly share your ideas....
Thanks in advance

Hi,
To follow up could you please provide the following information -
- the gateway listener.ora
- gateway init<sid>.ora
- gateway tnsnames.ora file
- create database link statement
- a gateway debug trace from the failing select. Add the following to the gateway init<sid>.ora file -
HS_FDS_TRACE_LEVEL=debug
and issue a select from a new SQLPLUS session, then end the session.
Are the gateway and the RDBMS in the same or different ORACLE_HOME directories ? The gateway is at a lower version than the RDBMS so you should apply the 11.1.0.7 patchset to the ORACLE_HOME where the gateway is installed, to bring it to 11.1.0.7.
Regards,
Mike

ORA-28511: lost RPC connection to heterogeneous remote agent using SID=

I am currently using the HS DG4ODBC on 11.2.0.3 with Linux X86-32bit platform, and I’ve gotten the gateway to work for all DML operations via DBLinks against a TimesTen database.
However, I am getting the following error in red when trying to execute the DBMS_COMPARISON package: ORA-28511: lost RPC connection to heterogeneous remote agent using SID=ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=timesten-hol)(PORT=1521))(CONNECT_DATA=(SID=hsodbc1)))
An internet search about the error leads me to think that this is a config issue with the cause being that:
Cause: The listener is unable to spawn the HS agent or the agent cannot find the ODBC lib directory.
Action: The PROGRAM line in the listener.ora file is incorrect or not specified. Make sure LD_LIBRARY_PATH includes the $ODBC_HOME/lib directory. If not, set LD_LIBRARY_PATH and restart the listener.
But I’ve revisited the settings and they all look OK, and also the HS agent seems to work fine for all types of DML operations on TimesTen, so I am at a loss of why the above error is occurring with dbms_comparison.compare.
I am also using the datadirect ODBC driver manager.
Thanks,

You've already filed a bug for this issue ( DG4ODBC CORE DUMP WHEN USING DBMS_COMPARISON.COMPARE) so please close this thread.

How to lanuch agent using weblogic

Hi,
can any one please explain about web logic and how to launch agent using web logic.
please share any links regarding this...
Regards,
sh

Hi sh,
Please go thru below URL
URL: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_em_integration/odi_em_integration.htm
Regards,
Phanikanth

Finding agent using Partner determination

Hi all,
i am working on CRM 5.0 My requirement is to sent workitem to Supervisor based on the netvalue in credit memo.when credit memo is created the Supervisor is identified using partner determination .
i am finding the Supervisor using database attribute and in the agents using expression and passing the attribute &.Supervisor&. my workflow always goes into Inprocess status . how to resolve it .
Thanks
vels

Hi Martin,
when netvalue of the Credit memo is greater than100$ a workitem needs to sent to the supervisor for approval.
the supervisor is identified by the system using partner determination while creating the credit memo.in my workflow i am finding the supervisor using database attribute for the creditmemo document.and passing the value to the Expression.the problem is workitem is not sent to the user(supervisor) inbox.
i have set a start condition for the workflow to trigger only when the netvalue is greater than 100$.
please help me in this issue.
thanks
vels

Calendar agent using all memory.

I am running a late 2012 iMac running Mavricks. This morning my computer hung. After rebooting it it hung again in a few minutes. I ran activity monitor and noticed that the calendar agent process slowing uses all the memory and then the OS starts using virutal memory on disk causing the computer to be ususable. I found an article to run off the calendar agent that fixes the issue for now.
launchctl unload -w /System/Library/LaunchAgents/com.apple.CalendarAgent.plist
Does anyone know why this all of a sudden would happen? I have not made any changes to my system recently, I use Gmail for my email and calendar.
Thanks!

I am using MacBook Pro 2014 Retina Display. Initially came with Mavericks and upgraded to Yosemite (10.10.2).
Had the same Problem. Calendar Agent took nearly 6 to 7 GB of the RAM and left me with 15MB ram. Got really irritated. But found this after a hard struggle. I tried the above solutions, think didn’t quite work for me.
Follow the steps you will get your problem solved.
Backup all the calendar events to your iCloud by enabling calendar in the internet accounts from system preferences. (Do this step only if you need your events to be there).
Then open TERMINAL and type.
chflags nohidden /Users/*******/Library
******* represents your username or the name in which your mac is started with. This name can be seen from "Macintosh HD” then “Users” then the user which you are..
After running the command then again type in TERMINAL
chflags nohidden /Users/*******/Library/Containers
Now close the TERMINAL after running it.
Now, open finder and goto "Macintosh HD” then to “Users” then the user which you are then “Library” then “Calendars”.
In “Calendars” you have got to delete some files.
Those are:
Calendar Cache
Calendar Cache- shm
Calendar Cache- wal
Email Cache.plist
Actually after deleting it,restarting PC solves the problem.
Sometimes you can’t delete those files because the Calendar Agent uses them and is running in background.
For that you have got to open Activity Monitor and Force Quit Calendar Agent and delete.
Restart your PC. Then open Calendar. Nothing happens and is back to normal.

Question in getting Superior agent using FM 'SWX_GET_MANAGER'

Hi Guy ,
   I have problem in get the initiator's superior . can someone help me ,thanks in advance .
   my scenairo is as follow :
   when assigned the user to position ,I use the standard rule 168 (FM:swx_get_manager) , I can get the correct result .but when assigned the Business Partner to postion , it is show me no found data . I have already the user id to the business partner in bp's profile'BUP003 employee' , and also I can see the user located below the position in the OM .
   whether I miss certain operation ? how can I get the correct superior ?
Jialiang.Qiu

Hi,
Well,The output of SWX_GET_MANAGER can only be User or Position.
As per the assignment where the Business Partner is assigned to the Position, this FM gets the BP as an agent and in the final stage of this FM, this BP Agent entry gets deleted due to the following statement.
DELETE actor_tab WHERE otype <> 'P' AND
                         otype <> 'US'.
So, by this we can infer that you cannot determine the Person attached to that BP(that was attached to the Position) using 168 rule. You may have to create a custom Rule in these regards if you insist to go with Position-BP-Employee strategy.
Hope this clears your doubt.
Regards,
<i><b>Raja Sekhar</b></i>

Does Log reader agent use sa in sp_replcmds?

We have publisher, subscriber, and distributor on separate servers. Replication is Push Transactional with replication agents setup to run under SQL Agent account context. We are in the process of disabling sa from everywhere and I am monitoring sessions
that use sa to make sure there is no impact.
I see that log reader agent session sometimes uses sa as login name in its sessions on publisher. In sys.dm_exec_sessions, there are two columns for login: Login_Name and Original_Login_Name. The Login_Name shows sa. Most of the time the SPID of log reader
agent on publisher shows the SQL agent service account as login name of the session. But sometimes the same SPID shows sa as login name. This always coincides with session running SP_REPLCMDS without any parameters and also messages like "The Log Reader
Agent is scanning the transaction log for command to be replicated. Approximately...." in Replication Monitor. Normally, the session would run SP_REPLCMDS giving some parameters. When this happens, in sys.dm_exec_sessions, the log reader SPID keeps showing
Original Login name as that of Distributor agent service account but login_name sa.
Does sp_replcmds run as sa? If I disable sa on publisher, distributor, and subscriber, will it break replication?

it all depends on what accounts you have set for log reader agent security, distribution agent security and snapshot agent security etc.. If you have not configured anything to use sa then you can disable and it should not have an issue.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Organizational unit as an agent using an expression

Hi SAP Experts,
Is it possible to assign an organizational unit as an agent for my task using an expression. The organizational unit to be used is stored in a container. Since it is possible for users to be stored in a container and used as an agent for tasks, I was wondering if this is possible for organizational units. Is it the same as adding US to the user id and storing it to a container? Do I use the OBJID of the org unit? Thanks in advance!

Thanks for the reply. Yes I'm aware that that's possible the organizational unit is slected from conditions that's why it has to be stored in a container. But anyway this is solved. Thanks!

Error while installing Agent using Agent Push Method

Hi All,
I have installed Oracle EM Grid 10.2.0.1 on Linux 4 (Enterprise). I have moved my repository database to another host. Grid(oms,repo db,agent) is working fine. But i am trying to install one agent in remote host using Agent push method. I am getting the error
Manual Fixes (1)
The following corrective actions need to be taken before proceeding. For your convinience check mark each item when you have fixed that issue.
There are some targets that cannot be monitered by the Agent.Hostname IP Address Details
*<host> <ip-addr> PROBLEM : There are some targets on the host which agent can not monitor since they are installed by different group.*
ERROR : Check complete. The overall result of this check is: Failed <<<<
RECOMMENDATION : Your Oracle Home is incompatible.
I verified SSH connectivity,TZ...
In remote host, 2 oracle application instances are running and repository DB. I have created one directory in repository db location and installing in that directory. This error is coming in Install Stage. I checked the oracle inventory permission and other 2 instance installed directory permission. Inventory owner is oracle. Oracle EBS mount point owner is root. But it is having read, write permission.
Is this a bug? Will this resolve after applying 10.2.0.5 patch.
Please let me know a solution for this.
Thanks,
Manikandan

Hi Rob/Nazim,
Thanks for the Replay.... I will try to update to patch 10.2.0.5
Regards,
Manikandan.

Upgrade agent using agentDownload.solaris -u

Hello,
Has anyone being able to upgrade the OEM agent from version 10.2.0.1.0 to 10.2.0.2.0
using agentDownload.solaris script and the -u option?
OMS version is 10.2.0.1.0
The command I ran was
./agentDownload.solaris -b $AGENT_HOME -o $OLD_AGENT_HOME -u
./agentDownload.solaris -b /opt/oracle/10Agent -o /opt/oracle/10Agent -u
Then it fails at
Initializing Java Virtual Machine from /tmp/OraInstall2007-05-28_09-47-38PM/jre/1.4.2/bin/java. Please wait...
Completed with Status=255
I have used the agentDownload script to install 10.2.0.1.0 in the past.

You need to apply the 10202 agent patch on 10202 agent oh
-u option use if u want to upgrade 10.1.0.X-->10.2.0.X

ZFD 4 Agent using ZFD 3.3

Similar Messages

Maybe you are looking for