ZFD3.2 SP3 install question
Do I have to install the "Server" and "Workstation" portions of the
Service pack together, or can they be installed "Server" first and then
a rollout of the workstation portion when I can?
I am currently running NW6SP3 and ZFD3.2 with no service pack. I plan
on installing NW6SP4 soon.
Thanks in advance for the input
Greg
Hi
You can separate them. Just keep in mind that some issues might not be
fixed until you apply the workstation part as well.
Regards, Kai Reichert
Novell Support Forums Sysop
People who claim that computers will make life easier for us have
obviously never used one.
Similar Messages
-
Weblogic Server 6.2 Sp3 Install Question
Hello everyone,
Can anyone tell me that I should use J2EE 1.3 instead of J2SE1.3 to install
WLS 6.1 SP3 that install from a .ZIP format?
Thanks,
Neo Gigs
"Follow the white rabbit..."Hi
You can separate them. Just keep in mind that some issues might not be
fixed until you apply the workstation part as well.
Regards, Kai Reichert
Novell Support Forums Sysop
People who claim that computers will make life easier for us have
obviously never used one. -
Exchange 2010 SP3 install question
Greetings! I am planning on installing the SP3 update for Exchange 2010 in preparation for a Hybrid deployment with O365. After installing the SP3 update to all Exchange servers in our environment, I was going to then install the RU8 on the servers.
Hopefully I can perform all of this during one maintenance window. I have already performed the schema update for SP3 during our most recent maintenance window.
I have been scouring the forums for any potential upgrade issues. I wanted to know if there was any concern about the RU8 update for SP3 that might affect our environment from past experience of other admins; whether it be Outlook clients (we use mostly
Outlook 2010 with some Outlook 2013) or OWA. We are currently on SP2, RU6.
Thanks in advance!Hi,
As what Amit mentioned above, you can upgrade from Exchange 2010 SP2 RU6 to SP3 RU8, as long as this version is supported for Hybrid deployment with O365.
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
To DAGs, please consider the following conditions:
Upgrade passive servers first. Place server in maintenance mode if any monitoring applications are in use. Stop any scheduled tasks or other processes running on the DAG member or within that DAG that could adversely affected the DAG member being upgraded
or the upgrade process.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
What is the deal with Win XP Media Center Edition and Updates to Adobe Reader? I have been unable to install Adobe Reader Updates 9.4 & 9.4.1 to Win XP Media Center Edition (32 bit - SP3) since last October!!! The update starts to install and then locks up when it starts trying to Remove Shortcuts! I have had to kill the update and then Adobe Reader does not function after that. I have had to go back and run a System Restore for a date & time prior to the attempted update install, to get Adobe Reader working again.
I was going to try uninstalling Adobe Reader 9.3.4 and installing the latest Adobe Reader version X (10.0.1) - until I read the System Requirements. Only Win XP Home, Professional & Tablet PC Edition with Service Pack 3 (32 bit) are mentioned as valid operating systems. Does this mean that version X (10.0.1) can't be installed on Windows XP Media Center Edition (32 bit) with SP3 installed???
Any help/info that you can provide would be greatly appreciated!You're correct. Clean uninstall i referred to meant clean up every single trace of Adobe Reader in your program files, in your registry, in your application data folder, etc. CClearner is a good one. Apart from using it for cleaning up web and windows temp files, did you try to use their Registry fix feature?
What I am trying to say is that you should:
-Uninstall Adobe
-Clear up any trace left by the program
-Clear up Temp folder
-Run Registry fix
-Restart the computer
-Reinstall the Adobe
That's all i can say. I am not saying that this will work for sure. It is just one of many resolution for you. Good luck! -
Please answer asap install question post
https://support.mozilla.org/en-US/forums/firefoxaurora/708210?last=46112#post-46112
please answer asap install question postHi C,
No, you should wait till the end of the Welcome video, when the message says it will restart to finish installation it means installation is still in progress, conclude the procedures.
Happy installing, good luck. -
Exchange 2010 SP2 to SP3 upgrade question regarding Forefront
When doing an upgrade from 2010SP2 to SP3 is it recommended stopping all exchange services manually before installing the update? I know there is a prereq of stopping forefront or you may have an issue with services starting. I have not run into
this issue in my test environment. I do not know if the SP3 install requires any checks of services to be running or not.
I have also notices on a cas/ht server with forefront installed, you can't stop forefront without shutting down the transport service. So is it best to just shut all services down first before doing the upgrade?Hi,
Based on the article below, you can stop all Exchange services before you decide to install an Exchange service pack, if you really require this.
How to install a service pack or software update on an Exchange Server computer that is running Forefront Security or Forefront Protection
http://support.microsoft.com/kb/929080/en-us
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Free download, and install question
Free download, and install question.
I need to buy a larger h/d, but till then I would like to put as many programs as possible on a external usb drive that I have hooked up to my PC. I've been able to do this with some other programs, and would like to try it with my Adobe Reader and Flash. When down loading and installing it does not give me the option to install in a defferent location other then my C: drive. Can this be done? Thanks you?From the MSI you have to create a MST (Transforms). In the MST create now the new property INSTALLDIR=F:\, where F: is your USB-drive. If you use then the command
msiexec.exe /i [MSI] transforms=[MST]
Adobe Reader should be installed to F:
Regards -
Hi,
As above really - is it OK to do the setup.exe /PrepareAD three weeks in advance of the Exchange SP3 install?
My thinking is: one less thing to do at the update and all Domain Controllers should have updated / replicated well in advance of the Service Pack install.
I only have a single Domain with two AD sites (Head office and Disaster Recovery).
Any issues with this / reasons NOT to do it?
thanks,
AdamHello,
Updating AD this way shouldn't cause any problems. After that operation you should verify that all modifications were successful.
Thanks, I thought so. I will do the AD update ahead of SP3 and perform the necessary checks to ensure all is OK.
Regards,
Adam -
Audio Driver for Compaq CQ40-145TU with XP PRO SP3 installed
Hello am using compaq presario CQ40-145TU in which vista is installed now i have downgraded to XP PRO SP3 installed... Am having problems with the Audio driver that sound is not coming in my laptop when i play a songs. I have already tried many drivers but all failed.. Plz help in getting Audio driver for my notebook model.. my notebook's s/n : CND84434WP and my p/n : FZ737PA#ACJ... Plz help me
Hi: That hardware ID decodes to the Intel ICH10D/DO SATA AHCI Controller. The chipset installation utility should be installing that device... https://downloadcenter.intel.com/download/20019/INF-Update-Utility-Primarily-for-Intel-6-5-4-3-900-Series-Chipsets
-
Ethernet card disappears after SP3 install (T60 1951-45G)
Hi!
I updated my Windows XP to Service Pack 3 yesterday and now it seems my ethernet card has disappeared. i.e. it acts at it has been disabled in the BIOS (not showing up in device manager etc.). I've tried entering BIOS, hiding it, booting, restart, enable in BIOS and new boot but no luck. In another thread I saw people complaining about broken MS update and that a clean install might resolve the problem.
My question is if anyone else have had the same experience and if it is solvable without a clean install of a streamlined SP3.
My machine is a T60 1951-45G.
Everything else seems to run just fine by the way, but I'll post back if I find additional problems.
Solved!
Go to Solution.There are reports of SP3 breaking LAN/WAN connectivity on many laptops (TechNet, MSFN, MS forums). Not quite certain what the resolution is at this point, and not quite certain whether a streamlined SP3 fresh install would be a fix for the issue. For some, SP3 disables WAN completely, while for others the issue is with LAN. It seems certain "newer" drivers are the culprit.
Before doing something drastic, try re-installing the LAN drivers from Lenovo to see if that fixes it, otherwise you may just have to revert back to SP2 (nothing wrong with it on an existing machine that otherwise runs without issues). SP3, afterall, is particularly a cumulative update (albeit with some new "features"), so really there's no great reason to update a working and updated XP-SP2 system with this new service pack.
On a side note, be sure to check if KB941644 was inadvertently installed as part of the update - it's a "hotfix" that is known to cause a number of connectivity issues (unresolvable).
You can check here (MS XP issues) to see if there is a solution to your issue.
Hope this clears things up -
BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit
We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PMWe have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice. -
Upgrading to Mountain Lion Pre Install Questions
HI:
I will be installing Mountain Lion Next week.
I have read through many of the turotrials and quired most of the following I still have a few questions.
I have some concerns in particular regarding the contents of my mail boxes and mail.
I have backed up unto an external harddrive using time machine. When I click on the mail app I can't access it and see if the contents are there. I just get a window showing the specs.
From what I have read all my documents applications and system info are backed up.
1} Will the contents of Mail Inbox and personal Mail Boxes be either on the external drive or in Mail itself after I upgrade?
2} Will I need to up grade iWork and other Mac programs after the upgrade?
3} Does time machines automatic backup, back up everything or do I need to do a manual back up for some thing?
4} Will I need to load new drivers for external devices such as my printer and mouse?
5} Will I need to reload third party soft ware such as Adobe Elements 9?
6} Will my bookmarks and homepage be saved in Safari?
Lot's of Questions, I have limited broad band width and will need to do most of this from a friends and internet cafes so I need to be prepared time wise and finanancialy as some things will have to be done at home and are going to push me into the next teir of my flex plan, possibly past the final teir.
Any and all advice will be appreciated.
Pantheria1. You have a backup of your mailboxes in Time Machine that you can restore, but Mail won't modify your mailboxes during the upgrade. The first time you open Mail after the upgrade, it will upgrade your mailboxes to be able to work with that new version.
2. If you upgrade from Snow Leopard, you should know that there's a newer iWork '09 version for Lion and Mountain Lion that make it compatible with iCloud, so you will have to install updates for iWork at least. Respecting to other apps, you have to consult it with the developer.
3. Time Machine makes a backup of everything in your OS X partition, and it makes automatic, hourly backups. If you want, you can also make a clone with Carbon Copy Cloner or Disk Utility's Restore feature in another external disk. The advantage is that you can start the Mac from it.
4. Theoretically, Snow Leopard, Lion and Mountain Lion use the same printer drivers. Respecting to the mouse, if you are using a third-party mouse, you have to consult with the developer if your mouse is compatible with OS X Mountain Lion.
5. Third-party apps won't be deleted unless they aren't compatible. See > http://www.roaringapps.com
After downloading OS X Mountain Lion, I recommend you to make a bootable copy with Lion Diskmaker, so you won't have to download OS X Mountain Lion each time you have to reinstall OS X Mountain Lion -
Upgrade service error after ZFD3 SP3 to ZFD4.01 upgrade
Hi,
Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
documentation instructions I still get the following error on the Inventory
Service startup screen:
"The Upgrade Service is migrating the schema
An error has occurred. The upgrade service is exiting now."
The Inv Srv object Server Status log says:
"1178: An error occured while performing the DBSchema migration
1177: Unable to complete all the operations, the upgrade service is exiting
with errors.
106: The Storer succesfully connected to the database
108:the database in not initialized as it is being upgraded"
All of these errors on the support site have as a fix either restart the
Inventory Service or contact Novell.
I've spent some hours now looking for a fix on Knowledgebase and in the Zen
forums but can't find anything useful. This is the second time I've run the
upgrade and this problem has occurred. I've reinstalled Zen3.2 from scratch,
applied SP1 and SP3.
I've checked policies and database objects, all appears as it should be.
These seem to be the relevant errors from the log files:
Migration Log:
Migration Exception Message->Could not add the dbspace..ASA Error -121:
Permission denied: unable to create the dbspace file "CIM10",
SQLState->42501, ErrorCode->262
Zenworksinvservice log file:
[12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
in AlterProcedure
[12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
again
See full logs below.
Is there no option but to go straight to Novell?
Regards,
Steve Law
zenworksinvservice-041202123653303.txt
[12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
Attributes of:
[12/2/04 12:36:53.349] ZENInv - Service Loader:
getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
[12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS returnedtrue
[12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service start
is pending...
[12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:53.827] ZENInv - Server Config:
getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case Ignore
String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
[12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
[12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy DN
is CN=Zen32 Server Package:General:ZENworks
Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:54.918] ZENInv - Server Config:
getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
[12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:55.001] ZENInv - Server Config:
getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
zendbdatabasetype=zendbDatabaseType: Integer 0,
zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
Case Ignore String
jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address: 13;20;,
zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
sybase:, zendbjdbcport=zendbJDBCPort: 2638}
[12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
started...
[12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service start
is pending...
[12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
Attributes of:
[12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
>
[12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS returnedtrue
[12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From 00:00:00
To 22:55:00 (Randomly dispatch during time period)
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned: true
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
started...
[12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
Attributes of:
[12/2/04 12:36:56.752] ZenInv - Upgrade Service:
getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
12 0}
[12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
returnedtrue
[12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
zenInvComponentStatus = 4.0 12 0
[12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
zenInvComponentStatus = 4.0 12 0
[12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
[12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
'ServiceStatusChangeListener' invoked
[12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
in AlterProcedure
[12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:04.881] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
"- l, "Tw s, "Ty T, "T j, "T-
l, " s, " T, "6 j, "9Y l}
[12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:04.984] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
"- l, "Tw s, "Ty T, "T j, "T-
l, " s, " T, "6 j, "9Y l}
[12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.277] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified records
are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
again
[12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.358] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.435] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.738] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified records
are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, Running EnumModifier in integrated mode with
upgradeService
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables,
dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbType:0
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbUser:MW_DBA
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbPasswd:novell
[12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
[12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
Successfully
[12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
[12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
[12/2/04 12:37:07.067] ZENInv - Storer: Start with
'ServiceStatusChangeListener' invoked
[12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
[12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
HashTable
[12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from ServiceObject
[12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
[12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
ServiceObject
[12/2/04 12:37:17.014] ZENInv - Selector:
InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
[12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from ServiceObject
[12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
[12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
Invoked
[12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.022] ZENInv - Selector: Checking for
DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check wether
this is a directory or File
[12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user: MW_DBA
driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds: port:
2638
[12/2/04 12:37:17.024] ZENInv - Selector: Directory
ExistsDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
ConfirmedDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
DATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
[12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
[12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable From
Serialized File
[12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
[12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
[12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
HashTable
[12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully From
Serialized File
[12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
ServiceObject
[12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
ServiceObject
[12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
ServiceObject
[12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
ServiceObject
[12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
DATA:\Zenworks\ScanDir\conv\
[12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether this
is a directory or File
[12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
[12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
[12/2/04 12:37:17.045] ZENInv - Selector:
[12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
Object
[12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
Synch Object
[12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties file
[12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
[12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
FileServiceController: Startup Properties: {chunksize=4096,
lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
tory, lockseed=ScanSelectorLock, transfers=100,
rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
servicename=zenInvScanCollector, portnumber=0}
[12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
[12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
started
[12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW SyncServiceTable
Constructor Invoked
[12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
exists. Check wether this is a directory or File
[12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
ExistsDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory Existence
ConfirmedDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
SyncServiceTable
[12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
existing SyncServiceTable
[12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:18.520] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:18.595] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
returnedtrue
Migration Log
Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
Unzipping the file migrate.zip
Transforming the Migration SQL files...
...3
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nPotsModem_1 is done with 545 0x03010c0a010202
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nOperatingSystem_2 is done with 143 0x03010e02
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nNetworkAdapter_3 is done with 544 0x03010c0b04
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nDiskDrive_4 is done with 543 0x03010c080301
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
nOperatingSystem_5 is done with 547 0x03010e0201
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
deoadapter_6 is done with 53 0x03010c030c0201
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
stemInfo_7 is done with 228 0x03020404
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
undadapter_8 is done with 546 0x03010c16
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
therboard_9 is done with 221 0x0302040101
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
gicalDiskDrive_10 is done with 113 0x03010c110402
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
ventoryscanner_11 is done with 181 0x03011402
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
stalleddriver_12 is done with 548 0x2701
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
stalledDirectory_13 is done with 551 0x4a
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
s_14 is done with 35 0x03010c0301
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
os_15 is done with 180 0x0301140101
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
CurrentLoginUser_16 is done with 549 0x48
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
LastLoginUser_17 is done with 550 0x49
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
User_18 is done with 205 0x03011a
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19 is
copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
0 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
_21 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
_22 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
23 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
or_24 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
twareOperatingSystem_24 is done with 142 0x03010e01
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
26 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30 is
copied
Starting Schema Migration
Adding the extra db spaces...
SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
has the results
File_NAME=mgmtdb9.db
dbfile's base directory =
SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
Totaltime taken for Schema Migration : 149
Migration Exception Message->Could not add the dbspace..ASA Error -121:
Permission denied: unable to create the dbspace file "CIM10",
SQLState->42501, ErrorCode->262I am getting identical errors with NW6.5 SP3, edir 8.7.3.6 upgrading from
ZFD4.01 to ZFD6.5. Haven't found any knowledgebase items on it.
Thanks,
Doug Streit
> Extra info: this is a NW6.5 SP2 server with edir 8.7.3.3, Sybase database.
>
> "SLaw" <[email protected]> wrote in message
> news:[email protected]...
> > Hi,
> >
> > Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
> > documentation instructions I still get the following error on the
> Inventory
> > Service startup screen:
> >
> > "The Upgrade Service is migrating the schema
> > An error has occurred. The upgrade service is exiting now."
> >
> > The Inv Srv object Server Status log says:
> >
> > "1178: An error occured while performing the DBSchema migration
> > 1177: Unable to complete all the operations, the upgrade service is
> exiting
> > with errors.
> > 106: The Storer succesfully connected to the database
> > 108:the database in not initialized as it is being upgraded"
> >
> > All of these errors on the support site have as a fix either restart the
> > Inventory Service or contact Novell.
> >
> > I've spent some hours now looking for a fix on Knowledgebase and in the
> Zen
> > forums but can't find anything useful. This is the second time I've run
> the
> > upgrade and this problem has occurred. I've reinstalled Zen3.2 from
> scratch,
> > applied SP1 and SP3.
> > I've checked policies and database objects, all appears as it should be.
> >
> >
> > These seem to be the relevant errors from the log files:
> >
> > Migration Log:
> > Migration Exception Message->Could not add the dbspace..ASA Error -121:
> > Permission denied: unable to create the dbspace file "CIM10",
> > SQLState->42501, ErrorCode->262
> >
> > Zenworksinvservice log file:
> > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
> failed
> > in AlterProcedure
> > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
> ZFS3.0
> > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
> > again
> >
> > See full logs below.
> >
> > Is there no option but to go straight to Novell?
> >
> > Regards,
> >
> >
> > Steve Law
> >
> > zenworksinvservice-041202123653303.txt
> > *********************************
> > [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:53.349] ZENInv - Service Loader:
> > getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
> > Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
> > [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service
> start
> > is pending...
> > [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:53.827] ZENInv - Server Config:
> > getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case
> Ignore
> > String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
> > zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
> > [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
> > [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy
> DN
> > is CN=Zen32 Server Package:General:ZENworks
> > Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:54.918] ZENInv - Server Config:
> > getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
> > Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
> > [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:55.001] ZENInv - Server Config:
> > getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
> > zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
> > zendbdatabasetype=zendbDatabaseType: Integer 0,
> > zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
> > Case Ignore String
> > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
> > zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
> > com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
> > CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address:
> 13;20;,
> > zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
> > sybase:, zendbjdbcport=zendbJDBCPort: 2638}
> > [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
> > started...
> > [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service
> start
> > is pending...
> > [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
> >
> getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
> > >
> > }
> > [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
> > fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From
> 00:00:00
> > To 22:55:00 (Randomly dispatch during time period)
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned:
> true
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
> > started...
> > [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
> > getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
> > 12 0}
> > [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
> > returnedtrue
> > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
> > zenInvComponentStatus = 4.0 12 0
> > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
> > zenInvComponentStatus = 4.0 12 0
> > [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceIni
> t'
> > [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
> > 'ServiceStatusChangeListener' invoked
> > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
> failed
> > in AlterProcedure
> > [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:04.881] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
> j,
> > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
> > l, "�� �s, "� �T, "�6� j, "�9Y l}
> > [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:04.984] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
> j,
> > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
> > l, "�� �s, "� �T, "�6� j, "�9Y l}
> > [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.277] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified
> records
> > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
> ZFS3.0
> > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
> > again
> > [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.358] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.435] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.738] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified
> records
> > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, Running EnumModifier in integrated mode with
> > upgradeService
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables,
> >
> dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbType:0
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbUser:MW_DBA
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbPasswd:novell
> > [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
> > [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
> > Successfully
> > [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
> > [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
> > [12/2/04 12:37:07.067] ZENInv - Storer: Start with
> > 'ServiceStatusChangeListener' invoked
> > [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
> > [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
> > HashTable
> > [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from
> ServiceObject
> > [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
> > [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
> > ServiceObject
> > [12/2/04 12:37:17.014] ZENInv - Selector:
> > InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
> > [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from
> ServiceObject
> > [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
> > [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
> > Invoked
> > [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
> > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
> > DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check
> wether
> > this is a directory or File
> > [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user:
> MW_DBA
> > driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds:
> port:
> > 2638
> > [12/2/04 12:37:17.024] ZENInv - Selector: Directory
> > ExistsDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
> > ConfirmedDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
> > DATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
> > [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
> > [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable
> From
> > Serialized File
> > [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
> > FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
> > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
> > [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
> > CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
> > [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
> > HashTable
> > [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully
> From
> > Serialized File
> > [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
> > ServiceObject
> > [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
> > ServiceObject
> > [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
> > ServiceObject
> > [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
> > ServiceObject
> > [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
> > DATA:\Zenworks\ScanDir\conv\
> > [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether
> this
> > is a directory or File
> > [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
> > [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
> > [12/2/04 12:37:17.045] ZENInv - Selector:
> > [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
> > Object
> > [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
> > Synch Object
> > [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties
> file
> > [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
> > [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
> > FileServiceController: Startup Properties: {chunksize=4096,
> >
> lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
> > tory, lockseed=ScanSelectorLock, transfers=100,
> > rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
> > servicename=zenInvScanCollector, portnumber=0}
> > [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> >
> 'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
> > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
> > started
> > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW
> SyncServiceTable
> > Constructor Invoked
> > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
> > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
> > DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
> > exists. Check wether this is a directory or File
> > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
> > ExistsDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory
> Existence
> > ConfirmedDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
> > Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
> > SyncServiceTable
> > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
> > existing SyncServiceTable
> > [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:18.520] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:18.595] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> >
> > Migration Log
> > ***********
> > Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
> > Unzipping the file migrate.zip
> > Transforming the Migration SQL files...
> > ..3
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
> > is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nPotsModem_1 is done with 545 0x03010c0a010202
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nOperatingSystem_2 is done with 143 0x03010e02
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nNetworkAdapter_3 is done with 544 0x03010c0b04
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nDiskDrive_4 is done with 543 0x03010c080301
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
> > nOperatingSystem_5 is done with 547 0x03010e0201
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
> > deoadapter_6 is done with 53 0x03010c030c0201
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
> > stemInfo_7 is done with 228 0x03020404
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
> > undadapter_8 is done with 546 0x03010c16
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
> > therboard_9 is done with 221 0x0302040101
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
> > gicalDiskDrive_10 is done with 113 0x03010c110402
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
> > ventoryscanner_11 is done with 181 0x03011402
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
> > stalleddriver_12 is done with 548 0x2701
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
> > stalledDirectory_13 is done with 551 0x4a
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
> > s_14 is done with 35 0x03010c0301
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
> > os_15 is done with 180 0x0301140101
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > CurrentLoginUser_16 is done with 549 0x48
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > LastLoginUser_17 is done with 550 0x49
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > User_18 is done with 205 0x03011a
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19
> is
> > copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
> > 0 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
> > _21 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
> > _22 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
> > 23 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
> > or_24 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
> > twareOperatingSystem_24 is done with 142 0x03010e01
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
> > 26 is copied
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30
> is
> > copied
> > Starting Schema Migration
> > Adding the extra db spaces...
> > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
> > has the results
> > File_NAME=mgmtdb9.db
> > dbfile's base directory =
> > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
> > CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
> > Totaltime taken for Schema Migration : 149
> > Migration Exception Message->Could not add the dbspace..ASA Error -121:
> > Permission denied: unable to create the dbspace file "CIM10",
> > SQLState->42501, ErrorCode->262
> >
> >
>
> -
Bootcamp and Windows XP/7 Install Questions
I got an iMac a few months back and want to set up BootCamp for a Windows install.
I have a Windows XP Full install disk w/the product key.
I also have a Windows 7 Upgrade disk.
From what I have read, the newest version of Bootcamp will not install XP, which I could then upgrade to W7 (I assume this is correct).
Can I then install from the Windows 7 Upgrade disk and at some point indicate the XP Product Code?
Secondary question - assuming I get Windows installed and running properly, if I boot to the Mac OS, can it see/access the Windows partition?
Thanks,
SteveIf the Windows 7 Upgrade is a full install. What you would do is install, then reinstall over itself. And only then will it activate.
There are upgrades that are to go from Home Premium to Pro and that isn't a full install.
Windows 8 CP is free and works.
Windows 7 System Builder are $99 for Home Premium 64-bit -
Exchange 2007 SP3 Install on 2008R2 Fails with "The data passed to a system call is too small"
I'm installing Exchange 2007 SP3 onto Server 2008 R2. I have run this install in compatibility mode and in normal install mode with the same results. Error code 3221684346: The data area passed to a system call is too small. I am installing directly from
the SP3 files, this is not an upgrade. What do I have to do to get this to work?
[2/15/2011 7:24:18 AM] [2] Interpreting line <CreateSecureKey:MSExchangeIS\ParametersPrivate> -- ID:31259 --
[2/15/2011 7:24:18 AM] [2] CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:1199)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Processing file 'C:\Exchange Server\Setup\data\mdb_reg.ins', at or near line 77 (CreateSecureKey:MSExchangeIS\ParametersPrivate) -- ID:31111 -- CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:488)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Registry file name: 'C:\Exchange Server\Setup\data\mdb_reg.ins' CRegistryManager::ScProcessFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\tools\regmgr.cxx:125)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Filename = 'C:\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScRunRegistryFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1379)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScRunRegistryFile
[2/15/2011 7:24:18 AM] [2] Filename = 'C:\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1249)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAddRegistryKeys
[2/15/2011 7:24:18 AM] [2] CAtomBaseMDB::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_basemdb.cxx:132)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CAtomBaseMDB::ScAddRegistryKeys
[2/15/2011 7:24:18 AM] [2] CBaseAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:639)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAdd
[2/15/2011 7:24:18 AM] [2] Service = 'MSExchangeIS' CBaseServiceAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:203)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseServiceAtom(Information Store Service)::ScAdd
[2/15/2011 7:24:18 AM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving ScSetupAtom
[2/15/2011 7:24:18 AM] [2] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] The following 1 error(s) occurred during task execution:
[2/15/2011 7:24:18 AM] [1] 0. ErrorRecord: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] Setup is halting task execution because of one or more errors in a critical task.
[2/15/2011 7:24:18 AM] [1] Finished executing component tasks.
[2/15/2011 7:24:18 AM] [1] Ending processing.
[2/15/2011 7:42:08 AM] [0] End of Setup
[2/15/2011 7:42:08 AM] [0] **********************************************I would probably rebuild the host machine. The Exchange installation should occur without any issues, and where a problem does occur that can be an indication of a more widespread problem. Rebuild the machine, reinstall the prerequisites and try again.
Simon.
Simon Butler, Exchange MVP
Blog |
Exchange Resources | In the UK?
Hire Me.
Hello Poster.
I am having the same issue, however it is most likely NOT a host box problem. The above advice is not a fix. I have 3 servers that are cloned with the same setup. 2 were fixed by doing the Vista compatibility trick, this one gave a different error (which
happened to be the same as above). This org was a 5.5 to 2000. to 2003 coexistence with 2007 currently(because the mailbox role won't install). It has something to do with AD or permissions. Server 2008 r2 inherently has problems installing exchange.
Example, having to use vista compatibility to get the mailbox role to install. SP2 patch gives the same error to some people, and also doesn't upgrade the mailbox role properly in some cases. Some people have had luck restarting the IIS admin service, but
that did not solve my copy of this error. I will repost here if I find a solution to this issue...
Same exact setup log for me as well.
[3/4/2011 10:45:51 AM] [2] Interpreting line <OpenMachineKey:SYSTEM\CurrentControlSet\Services> -- ID:31259 --
[3/4/2011 10:45:51 AM] [2] Interpreting line <CreateSecureKey:MSExchangeIS\ParametersPrivate> -- ID:31259 --
[3/4/2011 10:45:51 AM] [2] CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:1199)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Processing file 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg.ins', at or near line 77 (CreateSecureKey:MSExchangeIS\ParametersPrivate) -- ID:31111 -- CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:488)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Registry file name: 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg.ins' CRegistryManager::ScProcessFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\tools\regmgr.cxx:125)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Filename = 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScRunRegistryFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1379)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScRunRegistryFile
[3/4/2011 10:45:51 AM] [2] Filename = 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1249)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAddRegistryKeys
[3/4/2011 10:45:51 AM] [2] CAtomBaseMDB::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_basemdb.cxx:132)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CAtomBaseMDB::ScAddRegistryKeys
[3/4/2011 10:45:51 AM] [2] CBaseAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:639)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAdd
[3/4/2011 10:45:51 AM] [2] Service = 'MSExchangeIS' CBaseServiceAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:203)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseServiceAtom(Information Store Service)::ScAdd
[3/4/2011 10:45:51 AM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving ScSetupAtom
[3/4/2011 10:45:51 AM] [2] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] The following 1 error(s) occurred during task execution:
[3/4/2011 10:45:51 AM] [1] 0. ErrorRecord: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] Setup is halting task execution because of one or more errors in a critical task.
[3/4/2011 10:45:51 AM] [1] Finished executing component tasks.
[3/4/2011 10:45:51 AM] [1] Ending processing.
Just curious though, how long is your FQDN? Mine is 34 characters plus whatever exchange is adding to it during setup for this particular string. I found a post with the same error for ISA server and some buffer is only 100 characters for a system call.
ERROR_INSUFFICIENT_BUFFER 122 (0x7A) The data area passed to a system call is too small. http://msdn.microsoft.com/en-us/library/ms681382(v=vs.85).aspx Indicates a msft programming problem.
Outsource Technology Inc. MSFT Professional Consultant
Maybe you are looking for
-
I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it sta
-
Installation failed for Photoshop CC (2014)
Greetings, I have installation problem with my Photoshop CC (2014), whenever it try to install it gives me this error: "Installation Failed - Learn More", when I hit learn more it opens summary.htm page that has info, I guess it may come in handy wit
-
Hello - have a lovely old (??) Apple Mac version 10.4.11 - I know i need to upgrade as apps such as Skype and facetime to name but a few don't work. What is the highest version I should upgrade to - thx
-
Problem in embedding Multiple Images
Dear members, I am composing a mail in java mail. In the body i am trying to embed (Note: Not attach) three images files. But, only the first image is getting embedded. Other 2 images are only getting attached, not coming as embedded images.I tried v
-
Hi All, I have a requirement where i wrote go url syntax on the column formula if they click on that value it will navigate them to a real time environment page there in the data format of that column i made it as a HTML content i need to use this sa