Zfd4.01 remote control via desktop4.exe. What rights are needed?(repost, seems to have been stuck in wrong thread)
Hi.
Trying to give some non-admin users the right to remote control workstations via the user object. I have followed the tids/documentation for
this when using ConsoleOne and that works just fine.
When trying to remote control a user object with desktop4.exe (dopps zenwsbrowser actually) there seems to be some rights missing. Making the
user into an admin solves the problem and until the remote controlled user changes IP on his workstation it keeps on working even when removing
admin rights.
So the question is simply put:
What rights is needed on user AND workstation objects to remote control with desktop4.exe? Or if someone knows how I can check what attributes
has changed on a user after a remote control has been performed that would be sweet too.
/anders westerberg
Anders,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
What rights are needed for remote control
I have a user that I want to allow remote control rights for a group of
classroom PC's. What rights do I need to give her and where do I apply
them? I have read TIDS that tell me I have to give rights at each
workstation object which I find hard to believe as its so time consuming!
Thanks in advance
Hazel> On Thu, 27 Jan 2005 19:38:56 GMT, [email protected] wrote:
>
> > I have read TIDS that tell me I have to give rights at each
> > workstation object which I find hard to believe as its so time
consuming!
>
> depends.. if you have not eDir that's the case..
>
> but take a look at tools zenworks remote operators... which will help
you a
> lot in this case...
> --
>
> Marcus Breiden
I have edirectory and imported workstations etc .. running zen 4.1 .. I
just cant seem to figure out how to give this user rights to remote
control only one classroom.
Hazel
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net -
Recently had my iPhone stolen while on holiday in Las Vegas, I didn't report it, tried the track my iPhone app but just showed as offline, also there wouldn't have been any battery left on it anyway. I have passwords for everything. Just managed to buy a new iPhone, restored it but I have someone else contacts! Also I received a reminder on my iPad via iCloud obviously from someone else...what to do?
Contact the Apple account security team and get their assistance resetting the password: http://support.apple.com/kb/HT5699. Once the password is reset, the other party will no longer have access to your iCloud account. Then you can go to icloud.com and delete the other person's data from your account.
-
What rights are needed to do a Data Export?
I would like someone from our help desk to be able to do Data-->Export
in Console1 to export inventory data regularly. When they try this,
they immediately get the following error:
Data Export will not proceed. Unable to identify the type of
installation.
I saw TID 10088974 but I don't think it applies because if I login to
the same PC, it works. (Running Console1 locally).
I also saw another TID indicating user needs Browse rights to the
ZEN_invDatabase object. [Public] does have rights to this.
What rights do I need to grant?
-Marc JohnsonOn Wed, 15 Jun 2005 22:22:40 GMT, Marc Johnson wrote:
> What rights do I need to grant?
they will need the read right to the properties of the database object...
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
SSIS 2012: What rights are needed to connect to SSDB via DMO
I'm trying to connect to the SSDB catalog to execute a package using the .NET object model as per
http://social.technet.microsoft.com/wiki/contents/articles/21978.execute-ssis-2012-package-with-parameters-via-net.aspx?CommentPosted=true#commentmessage
The problem is if I do this with a normal user I get
The server principal "XXXX"
is not able to access the
database \"SSISDB\" under the
current security context.
If I grant the user sysadmin rights it works, but the old Integration Services model of granting db_ssisadmin doesn't help
PaulAs far as I know db_ssisadmin is a msdb role so it wont work well with package access control for packages stored in IS Catalog. It will be relevant only in cases where package is stored in msdb.
If you're using catalog (2012 deployment) you should be using ssis_Admin role which is what SSISDB provides you with for access control
see
http://blogs.msdn.com/b/mattm/archive/2012/03/20/ssis-catalog-access-control-tips.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Post Author: mchu1
CA Forum: Xcelsius and Live Office
Hi, I have BOXI IR2. After installing Live Office, logged in as someone who has admin rights and everything works well - able to see all folders/categories and objects within CR, Universe and Webi. The problem comes when a user with "non-admin" rights, he/she was not able to see the Public folder in CR or Webi, which contains all the reports. User was able to see the Universe categories but no objects. Any ideas? ThanksPost Author: Tiffany
CA Forum: Xcelsius and Live Office
Did you figure out what the problem is? I am having the same issue and would like to figure out how to fix this as well. Any help is appreciated.Tiffany -
What commands are needed to configure authentication?
I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
CheersSorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them. -
What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!?
Thank you so much for the link. Am persevering thru it, will get there eventually, as I had already tried to press the Report a Problem link on the invoice, but it won' t connect to iTunes store on my iPad, it keeps saying can't connect. Infuriating. But thank you, you found me a link I would have taken ages to find.
-
WHat do I do when I try to update my apps on my 4 gen iPod touch and the apps have been stuck on the waiting thing. I've restarted it and tried to delete them and see if I could redownload them but nothing I'd like to know how to fix the problem soon Cus can't stand going through a day without instagram kik and pandora so please help. If anyone can tell me how to delete them so I can download them again that would be great. Please hurry!!
Fix iOS Apps Stuck on “Waiting…” During Download & Install
Fix iPhone Apps Stuck "Waiting" During Installation -
Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable! Rarely used and out of warranty, what a rip off!! I have been on MACS since the 80's and things are getting more and more difficult to deal with. Why did it quit after barely being used? Any help from Apple?
It depends on what you mean by "barely one year old". If the iMac is only a couple of days out of warranty, Apple's been known to make exceptions and extend the warranty, though it's by no means guaranteed. If it's several days or more out of warranty, then Apple will fix it, if it's a hardware problem, but the repair won't be free. This is no different now then it would have been with a Mac purchased back in the 80s.
Why the drive failed, if indeed it has, is impossible to say. Could have been a static shock, a weak component that failed when power was applied, or a mechanical fault in one of the tiny parts used in optical drives and hard drives that finally broke.
Regards. -
How do I determine what xtras are needed?
From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+ -
I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?
This is quite odd. I wonder if you could try something for me on EACH computer.
Use Help > About Adobe Acrobat DC.
At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
On each of the two machines, what does it say? (I think something odd has happened) -
What wires are needed to connect to a projector
What wires are needed to connect a macbook to a projector
A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.
-
What steps are needed when upgrading from a pc to a Mac?
Copy everything from your old computer to your new one.
-
I don't have a rescue email option and i want to reset the security questions , so what shall i do?? I have been trying to do so for about 2 weeks , please can you help???
You will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699
When they've been reset you can then use steps 1 to 7 half-way down the HT5312 page that you posted from to add a rescue email address for potential future use
Maybe you are looking for
-
Hi guys, please help me. my son's mini ipad cannot be unlocked because the touchsreen is not responding.. help please. thank you.
-
Vignetting added and color adjusted immediately post import into Lightroom5.
Vignetting added and color adjusted immediately post import into lightroom5. My photos from my most recent trip, when imported into Lightroom, have a heavy vignette very close to all 4 corners of the photo, and seem to have some small adjustments bei
-
Exclude Option through Selection Screen
We have BI2004s. This is the scenario 1. Query has a selection screen one of the option is profit center 2. When you click on to select values for input it comes with popup window. We can choose the value we want and say add. on the right hand side i
-
Would the apple wireless n airport card perform any better then the wireless N adapter I currently have?http://www.newegg.com/Product/Product.aspx?Item=N82E16833320048&cm_re=asus_wirel ess_n-_-33-320-048-_-Product
-
I want to connect two parameters for the open document. The "main" report for lack of a better word. Has a parameter that allows multi numbers to be picked from a LOV. I want to pass whatever they picked to the report at the other end of the open