Zfield value not copied in copy control

Hi Experts,
I have created zfield "net value" in complaints item list. when i do copy line item from order to complaints, all the other standard field values get copied except zfield which i have added.
Kindly suggest how to solve this issue.
Thank you,
Cha

Please use the copy control BADI CRM_COPY_BADI. This functionality is achieved through copy control feature. For the standard components , the standard fields are copied but for custom fields you have to implement the BADI CRM_COPY_BADI.
Regards
Kavindra
<Moderated>
DO NOT ask for Points.
<Moderated>
Edited by: Harshit Kumar on Nov 16, 2011 8:52 AM

Similar Messages

Settlement Receiver Value not Saved in Table Control Program

Hi,
I have Table control program regarding to Equipment Log, where in output it show the Equipment details with Account assignment category, General settlement receiver, Shift Hours, Work Hours, Idle Hrs, Maint. Hrs., Production Hours etc...
In report, we have a formula i.e.
Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
and all those fields are linked to each other.
If we want that Work Hours should be 0, then msg showing - Working Hrs. should be entered. , means without enter Working Hrs. value we cann't save it.
Now we removed the link of Working Hrs to others, means if we insert value 0 of Working Hrs., no msg showing. BUT Problem is this after remove this link, General settlement receiver value should not be saved.
We want Work Hrs. as 0 value and General settlement receiver value must not be BLANK. It should be Saved.
Plz guide..

hi
write a if statement after the Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
if work hours = 0, message i000 with 'Working Hrs. should be entered'.
else ,write:/ shift hrs.end if. try to create a button for save when you click data will be saved or create a subrountine perform shift hrs than use if loop and select form end form inside keep Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
thanking you

LRM-00112: multiple values not allowed for parameter 'control' - SQL Loader

Hi,
Please can someone help me identify why the below SQL* Loader test doesn't work and i get the error in the subject header?
ctl file (load.ctl)
load data
infile 'C:\Documents and Settings\My Documents\loader\TEST.csv'
into table XXCPP.SQL_LOADER_TEST
fields terminated by "," optionally enclosed by '"'
( PERSON_ID, EMP_NAME, EMP_NUMBER )
command line prompt
sqlldr thompsos/generate control='C:\Documents and Settings\My Documents\loader\load.ctl' log='C:\Documents and Settings\My Documents\loader\load.log'
I'm obviously missing a key piece of code, but can't locate it?
Many Thanks

Thanks, unforunately it's still the same. What i have done is move the file to the c drive rather than using a location which has spaces on it.
I no longer have the same issue as before, but Now i get a different message that would imply my directory isn't correct. I've double checked and everthing seems in order and files are where i've selected.
Error:
sqlldr thompsos/generate control='C:\loader\load.ctl' log='C:\loader\load.log'
SQL*Loader: Release 8.0.6.3.0 - Production on Wed Jan 12 13:31:50 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
SQL*Loader-500: Unable to open file (C:loaderload.ctl)
Linux Error: 2: No such file or directory
ctl file (load.ctl)
load data
infile 'C:\loader\TEST.csv'
into table XXCPP.SQL_LOADER_TEST
fields terminated by "," optionally enclosed by '"'
( PERSON_ID, EMP_NAME, EMP_NUMBER )
Command Line
sqlldr thompsos/generate control='C:\loader\load.ctl' log='C:\loader\load.log'

Restore from OSB. RMAN-06024: no backup or copy of the control file found

I backed up controlfile for standby on production server to OSB media:
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:15:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: EMGC (DBID=1838014073)
connected to recovery catalog database
RMAN>
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
BACKUP CURRENT CONTROLFILE FOR STANDBY tag 'stb_ctl';
RELEASE CHANNEL ch1;
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: ch1
channel ch1: sid=1085 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 25-JAN-11
channel ch1: starting compressed full datafile backupset
channel ch1: specifying datafile(s) in backupset
including standby control file in backupset
channel ch1: starting piece 1 at 25-JAN-11
channel ch1: finished piece 1 at 25-JAN-11
piece handle=1em30ngu_1_1 tag=STB_CTL comment=API Version 2.0,MMS Version 10.3.0.2
channel ch1: backup set complete, elapsed time: 00:00:27
Finished backup at 25-JAN-11
released channel: ch1
RMAN> list backup of controlfile;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RMAN configuration parameters are successfully reset to default value
starting full resync of recovery catalog
full resync complete
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN>
On standby server I try to restore this control file but there is some trouble with restore... By the way I can delete that backup piece...
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:34:32 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: emgc (not mounted)
connected to recovery catalog database
RMAN> set DBID=1838014073;
executing command: SET DBID
database name is "EMGC" and DBID is 1838014073
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
crosscheck backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Crosschecked 1 objects
released channel: ch1
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
RESTORE CONTROLFILE FROM TAG 'STB_CTL';
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting restore at 25-JAN-11
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2011 15:35:20
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
delete noprompt backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1480 1479 1 1 AVAILABLE SBT_TAPE 1em30ngu_1_1
deleted backup piece
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Deleted 1 objects
released channel: ch1
RMAN>

You cannot specify a tag for a standby control file.
read here
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1002594
Edited by: Adigozalov Gurban on Jan 25, 2011 2:14 PM

Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."

I have a number of PSD files I've created and I'm trying to save them as PDFs.
I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
Nothing seems to fix it.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.

Here is a clip from a past post where user could not drag and drop files to hard drive.
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

Not able to copy the tree node text in solaris, while easily done in window

Hi,
I m not able to copy the text present on the tree's node to terminal or other text editor in solaris. I m using <Shift><control> C and V comaand for the same but the text is not being copied and pasted on the text pad or the terminal window.
While the same is possible in windows OS using ctrl+c and ctrl+v command.
Please suggest the possible solution for the same, is there any property of the tree/OS needs to be set?

Help About says I'm on 20.0.1
Up until last week, I was able to use the tab key when typing emails and other multi-line text boxes.
Suddenly the behavior of the tab key changed. This isn't the first time. It's been quite a while ago that the function of the tab key changed from indenting to moving around the page, then after some time it changed back to indenting.
Can we get this fixed and leave it alone, please?
I may give one of those add-ins a try, but my problem with add-ins is that they break when FF is patched or upgraded, then I'm left with out the solution they provide.
Can we just fix Firefox, please?
Thanks,
Frank
P.S. Another potential fix I came across suggested starting FF in safe mode to see if the problem goes away. It does not. It seems to be a change to FF that appeared after an update last week. On or just befor 24 Apr.

RMAN-06024: no backup or copy of the control file found to restore

I am cloning a new database using a full backup from previous nightly rman backup using a standby database utilizing catalog. When I run the duplicate command, I get
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2011 15:04:05
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
But the backup of controlfile does exists in the right place. What am I missing?

958210 wrote:
i was trying to clone a database to a remote machine, but it is giving me the following error
'RMAN-06024: no backup or copy of the control file found to restore
ORA-19505: failed to identify file "/u01/app/oracle/product/11.2.0/dbs/c-1617115651-20120912-02"
even though i can list the backup of the control file in the source machine.
thank you
'How do I ask a question on the forums?
SQL and PL/SQL FAQ
Since we don't know what you did, so we can't know what you did wrong

Vista not a genuine copy from recovery

I am working on my cousins n100. I had to order recovery dvd to bring his system back. I have recovered the system however now it is not a genuine copy of vista. How do I get this solved so he can receive updates. Also the control panel is not showing up, when I click on control panel it opens a explore window and is blank, or no screen shows at all. any ideas?

Have you checked out THIS MS forum?
Might be some help there?

Accounting Revenue distribution not copied when copying a bill

Hello,
I'm trying to copy bills (copy single bill functionality) in PS 9.0. When I do this it only copies my account and alternate account and no other values (e.g. affiliate, project, etc.)
I'm sure I missed some set up but can't find which part.
Can somebody help me with this?
regards,
Stijn

Hi Stijn
Assuming there are no customisations affecting the objects, I suggest you raise a service request with My Oracle Support.
PeopleBooks reads "The system copies all bill information—including any discounts, surcharges, notes, and accounting distributions, but excluding bill status and invoice date—to the new bill. The system creates the new bill with a status of NEW, with a blank invoice date, and with a current date bill added".
My experience is consistent with this information, so your situation is unusual and unexpected. I don't recall any specific setup or configuration that should affect this. I hope that helps.
Regards
Neil

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

I have installed IOS 7 in my 4S but still when i connect it to itunes i am not able to copy music from my Itunes to my Phone any idea why? can some one help me with this. I am using Mac book Pro.

Hi All,
Issue 1:
I have installed IOS 7 in my 4s and when i connect it to my Mac itunes it detects my phone but i am not able to copy from the itunes version 11.1 (126).
can some one check why i am not able to transfer pics or music from my Mac to iPhone 4s and can let me know on this please.
Issue 2:
And to all my apps i am not getting automatic pop up when i receive a message, It says "Please connect to itunes to use push Notification" can some one say how to go about his.
Issue 3:
when i try to launch my facetime from my phone.After entering my user name and password it not launching my Facetime or imessage. dont know whats the reason, I am not able to use both Facetime and imessage from my iphone 4s.
Looking forward for your reply.
reagrds
sathish

I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help.

Not able to copying files/folders from one Document Library to another Document Library using Open with Browser functionality

Hi All,
We have SharePoint Production server 2013 where users are complaining that they are not able to copy or move files from one document library to another document library using “Open with Explorer” functionality.
We tried to activate publishing features on production server but it did not work. We users reported following errors:
Copying files from one document library to another document library:
Tried to map the document libraries and still not get the error to copy files:
In our UAT environment we are able to copy and move folders from using “Open with Explorer” though.
We have tried to simulate in the UAT environment but could not reproduce the production environment.
Any pointers about this issue would be highly appertained.
Thanks in advance
Regards,
Aroh
Aroh Shukla

Hi John and all,
One the newly created web applications that we created few days back and navigated to document library, clicked on “Open with Explorer”, we get this error.
We're having a problem opening this location in file explorer. Add this website to your trusted and try again.
We added to the trusted site in Internet Explorer for this web application, cleared the cache and open the site with same document library but still get the same above error.
However, another existing web application (In same the Farm) that we are troubleshooting at the moment, we are able click on “Open with Explorer”, login in credentials opens and we entered the details we are able to open the document
library and tried to follow these steps:
From Windows Explorer (using with Open with Explorer), tried to copy or move a files to
source document library.
From Windows Explorer moved this file to another destination document library and we got this error.
What we have to achieve is users should be able to copy files and folders using
Open with Explorer functionality. We don’t know why Open with Explorer
functionality not work working for our environment.
Are we doing something wrong?
We have referred to following websites.
we hope concepts of copying / Moving files are similar as SharePoint 2010. Our production environment is SharePoint 2013.
http://www.mcstech.net/blog/index.cfm/2012/1/4/SharePoint-2010-Moving-Documents-Between-Libraries https://andreakalli.wordpress.com/2014/01/28/moving-or-copying-files-and-folders-in-sharepoint/
Please advise us. Thank you.
Regards,
Aroh
Aroh Shukla

Why I am not able to copy and paste photos from my desktop to my Itouch?

I am not able to copy and paste photos from my computer to my Itouch. I use to be able to do it. Now there is an error message that says my device is wither disconnected or stopped responding.
But when I plugged in the Itouch, it still shows on my computer, still able to see my existing pictures in it. Just not able to paste/drag any new pictures into the folder.
Anyone has this problem and able to solve it?
Thank you.

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

New color laserjet pro mfp m177 will not scan or copy

Product is new. The problem is that this unit will not scan or copy. I downloaded the latest drivers, but they would not install completely. I also ran thru some trouble shooting guides on the HP website, but still it doesn't work. It tries to make a copy, but it acts like it starts and then stops without completing the function. It's almost like the scanner mechanism is stuck. Anyone ever have this problem with a brand new printer?

Hello , Thanks for posting in the HP Forums, and welcome! I understand you are unable to make a copy or scan on your new HP Color LaserJet Pro M177fw MFP. I'd like to help you with this. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers. If the issue persists, I would suggest download and installing the most recent firmware for your unit. You can download the firmware update utility here:HP Color LaserJet Pro MFP M177fw Firmware UpdateNote: You will need to connect the printer via USB to update the firmware, as any interruption during the firmware update can cause more issues. If this still does not resolve the issue, please let me know if you are getting some sort of error message on the screen or any blinking lights to indicate what the problem may be. Hope this helps!

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

Zfield value not copied in copy control

Similar Messages

Maybe you are looking for