ZFS broken entirely?

ok so Apple removed zfs from any doco regarding 10.6 some time ago but didn't complain or warn that I had the read/write kext installed on upgrade, no big deal, I go to reinstall the read/write and the system seems to accept it (I can load the kernel module) but when I attach disk I get a neat little warning that though a ZFS formatted disk is present and its data is intact it is not able to be mounted.
Anyone else see this? a simple warning would have allowed me the chance to migrate or simple not install this but now I am faced with having to back out to 10.5 to recover 1TB of iTunes data.
help? even allowing read only would have been nice but this is just not cool.

Read only support was in 10.5, read/write was experimental and a call to support on this proved to me more than useless, three escalations and a consult with the server group about this strange word 'RAID' and I decided to try to force import the storage pools (as I could see the kernel module loaded) it works, looks like the upgrade 'cleaned' /etc/zfs/ and its association with this pool. We will most likely never know why ZFS isn't cool enough for the Apple brain trust but having used it in an enterprise setting for quite some time I wouldn't trust my data anywhere else; I have lost more to HFS/HFS+ than I have to 'experimental' ZFS. thanks for the reply just the same.

Similar Messages

Need help!! How can I transfer my entire MediaCenter? Old laptop broken

My old laptop has broken down and I have no current backup of my iTunesMedia. Anyway, is there a possibility to transfer my entire mediacenter to my new laptop or not?
I looked for a solution in many communities, but the only thing I read is that I can now only transfer the songs that I bought in the iTunes Store.
At the moment, I've got about 1900 songs on my nano and "only" 250 of them are "iTunes Songs", I got the rest from friends etc. and not all the other songs are saved on my hard disk.
Can you help me?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My PC has broken, if I buy a Mac, can I transfer my entire library over with ease?

My PC has broken, if I buy a Mac, can I transfer my entire library over with ease?

That depends. What is broken on the PC? If the hard drive has failed and you do not have a backup, you will need to look into data recovery services.
It's easy to move stuff over from a working PC. One that is not functioning is a bit more difficult.
Take a look at this Apple article about data migration from a PC, it may be useful.
Best of luck.

My Spell Check is broken across the entire system

My spell check seems to be broken across my entire system How do I go about reinstalling that component?

Make sure that you have selected the correct dictionary.
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.<br />
You can also try to toggle the "Check Spelling" item off and on again.<br />
<br />
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]<br />
See also http://kb.mozillazine.org/Dictionaries<br />

Entire project broken somehow! AE, ME and PP

Hello everyone
I've come here as a last resort to my project being broken (yet again!)
Symptoms include:
Premiere Pro:
all media is pending, on start-up it's loading each file very, very slow (7MB/s maximum in Disk Monitor) and after an hour or two when everything is supposedly loaded by PP, it still shows Media Pending on the monitor.
After Effects:
The AE project which includes the Dynamically Linked sequence from PP crashes on start-up. Nothing I can even do about it in AE.
ME:
I can open the AE project but it shows no compositions available for rendering. Just a blank column.
What I have tried so far:
- Cleaned the media cache
- Manually deleted the media cache
- Defragmented the HD
- Checked SMART and other self tests on the hard drive. The drive is in perfect shape.
- Added exception rules for all *.exe's I could possibly think of that are related. (dynamiclinkmanager, QTsomethingserver, PProheadless, AE.exe, PP.exe, etc)
I will try updating everything to the latest version now but I don't believe this will work as I have had this problem before with a fully updated CS.
The last time I had this problem (about a week ago), I managed to fix it by re-installing the entire CS5.5 Master Collection. I do not want to do this again as I'm using a (volume?) license from school which requires me to physically bring my computer in and let them enter the serial. (Is this even normal that I do not receive the license I've paid for?)
I am really lost right now!
Regards

I appreciate the reply Harm but unfortunately it's not helping me much. As I mentioned, I'm still in school and I can not really afford a dedicated editing station, especially when I'm not headed in this direction of media development Of course you made a fair point and I apologize for forgetting the basics of a post like this.
I'm running a Windows7 64- i7 2500K overclocked to 4.5GHz with 8GB of DDR3. My main disk is a Vertex2 SSD and my storage HD (Media Cache, applications) is a Samsung 2TB 7.2K RPM SATA2 disk Perhaps you are mixing up Mb and MB because 7MB is not OK at all for a hard drive like this. It should be getting atleast 100MB in read (140MB average as confirmed on other tests.)
My other projects are working fine, so the hardware is excluded from the source of the problem.
I would like to add that I have just updated my CS5.5 to its latest versions, renamed my source files folder and the problem persists. Extremely slow reading speeds of footage after I have re-located the file in the popup window that came up after it couldn't find the clip in the original location. I believe this is what causing AE to crash: it can't read the linked sequence fast enough and AE times out.
I apologize for my bad writing skills, English is not my main tongue
Regards
Message was edited by: Pieterjan - KL
I forgot to mention that both times this happened, this was after I nearly finished my project and I was rendering the project in Media Encoder. I don't risk to experiment anymore but I believe this happened when I canceled a render in ME. Perhaps I have found a bug? In the meanwhile, it has suddenly decided to work again. So I'm finishing and rendering the project so I will not have to touch it ever again.

I have an Ipod 4th generation ipod with a broken screen: pretty much the entire upper trim is broken off as I can see the camera. Why does my Ipod touch screen only respond in the very middle? Top and bottom work not left or right.

When the Ipod touch 4th Gen first came out, I got this ipod. About 6 months later, it fell out of my pocket and the top of the screen broke to the point where I can see the camera. The ipod worked perfectly fine for a long time untill about 8 months later when I started having issues with the Ipod. I still was able to unlock and use it but it was hard to unlock. It worked fine when it opened but unlocking it for some reason difficult. Now, I cannot unlock it at all and I am only able to press the play button for music (double-tap home) and press cancle (in the dead center) for a soft reset. Im trying to figure out whats goin on and as of now i have no clue. I have tried resetting it and am in the process of restoring it completely. Is there any possible way that this is just a glitch that can be fixed or is it done for good because somethings broken? I'ld like to know before I really put more time into this.

Becaise the digitizer is broken in that area
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

ZFS Webconsole Broken

Hi,
I am having trouble with my Solaris 10 x86 webconsole, in particular, the ZFS Administration. I'm not exactly sure when it broke but it was either after and update to CAM (Common Array Manager) or any number of other patches that I installed.
After updating the CAM software I no longer had the ZFS Administration option in the webconsole so I tried to manually re-register it with smreg add -a /usr/share/webconsole/webapps/zfs (I think - I got that from bash history so that could be incorrect).
But after doing that I now have the option but if I click on it, It only partly comes up and the left hand frame with an "Unable to Connect ....host:6789", the right hand frame is blank.
The top frame displays the normal "application", "version", "logout" and "help" buttons and the version button works and says "ZFS Administration 1.0 ..."
Clicking on the "Applications" button brings me back to the web console login and said the Session Time Out (even though I just logged in less than a minute ago). The other Application("Sun StorageTek(TM) Common Array Manager") works fine.
Can anyone suggest a possible solution or what to look for?
Thanks,

I think waiting for a patch might be indefinite, Since I had the problem before 10/08 was released so I don't think it would be specific to the 10/08 release. I've been waiting for a "patch" since June and still no fix. I'm thinking that it's more of a configuration change that occurred and until we find the config that is causing the problem we will continue to see it through any additional patches.
We had this happen with the Sun Java System Calendaring system where a patch installed properly but when running there was a config option that was interpreted in the previous release (either due to a bug or some other issue, I don't think it was deprecated) that was no longer interpreted after the patch was applied and subsequent patches did not help since the config should not have been interpreted as correct in the first place.
Just my .02,
If I ever get any time to really investigate this in any great depth I will update this post if I find an answer. For now I'm being content with the command line (which I usually prefer).

Zfs volumes broken post os patching - spec_getpage called for character...

Hello all,
I have a T2000 (sol10 8/07), OBP 4.27.7, SUNWldm 1.0.1, zfs version 4 that post os patching (using the Sept 08 Recommended patch cluster) now cannot use zfs volumes as virtual disks. Files on zfs filesystems used for boot devices however work fine (ie the ZFS for boot disk setup as described in the admin guide). Whenever I try and "bind-domain" on a guest domain using a zfs volume I see the following in /var/adm/messages on the primary domain...
Sep 3 15:16:56 isdsyddev13 specfs: [ID 853503 kern.notice] NOTICE: spec_getpage called for character device. Check any non-ON consolidation drivers
Sep 3 15:16:59 isdsyddev13 last message repeated 25903 times
syslog tail spins and chews up close to 100% of the cpu. The only way to recover the primary domain is to reboot it (and in some cases power cycle). On the system console I also see the following..
message overflow on /dev/log minor #6 -- is syslogd(1M) running?
NOTICE: spc_getpage called for character device. Check any non-ON onsolidation drivers
A guest ldom config that contains use a zfs volume which kills things when you run bind-domain below..
root@isdsyddev13# ldm ls -l itgsyddev11
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
itgsyddev11 inactive ----- 4 4G
VARIABLES
auto-boot?=false
boot-device=vdisk
NETWORK
NAME SERVICE DEVICE MAC
vnet0 primary-vsw0 network@0 00:14:4f:f8:85:1c
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk0 vol9@primary-vds0 disk@0
vdisk1 vol2@primary-vds0 disk@1
There is only one service domain (primary) and it runs the only virtual disk service. Entries for the above vdisks on the primary-vds0 are...
vol2 /dev/zvol/rdsk/isdsyddev13zp_loc/itgsyddev11-optbmc2
vol9 /isdsyddev13zp_loc/itgsyddev11/bootdisk-fullos
subset of zfs output below. The os boot files are clones of a snapshot.
root@isdsyddev13# zfs list
NAME USED AVAIL REFER MOUNTPOINT
isdsyddev13zp_loc 142G 53.5G 79.5K /isdsyddev13zp_loc
isdsyddev13zp_loc/boot-images 20.0G 53.5G 20.0G /isdsyddev13zp_loc/boot-images
isdsyddev13zp_loc/boot-images@initial 22.5K - 20.0G -
isdsyddev13zp_loc/itgsyddev11 645M 53.5G 20.0G /isdsyddev13zp_loc/itgsyddev11
isdsyddev13zp_loc/itgsyddev11-optbmc2 25.4G 58.0G 21.2G -
isdsyddev13zp_loc/itgsyddev11-optbmc2@20080424 4.21G - 18.6G -
Note that if I remove vdisk1 from the guest domain, bind-domain works fine, no issues. So this is an issue just with the zfs volumes used as virtual disks. I also created a new zfs volume, added it to the primary-vds0 and the guest domain. However on bind-domain, same error/issue.
Patches applied from the patch run below...
119812-06
120272-21
127959-02
137017-03
125166-11
119783-06
125184-07
119254-57
120222-28
120222-29
128306-05
122911-13
120292-02
123590-09
119313-21
119059-44
124630-17
120410-29
120094-21
118712-22
127737-02
136892-01
125539-04
137019-02
119042-11
127922-04
138159-01
121004-04
119090-26
127853-02
120830-06
137032-01
137093-01
123611-04
137871-01
136998-04
127755-01
125891-01
127127-11
138068-01
137289-02
137111-03
138291-01
126133-04
138075-02
125551-02
128342-01
128000-01
128294-02
127884-01
128328-01
126206-04
124393-06
119757-12
137321-01
121095-02
119810-05
120543-11
125378-05
128300-03
120201-05
125719-12
137080-01
136882-01
125731-02
121308-12
Any help appreciated.

I am not using ldom version 1.0.3, I'm using version 1.0.1 as per the original post
root@isdsyddev13# pkginfo -l SUNWldm
PKGINST: SUNWldm
NAME: Logical Domains Manager
CATEGORY: application
ARCH: sparc.sun4v
VERSION: 1.0.1,REV=2007.08.23.10.20
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
PSTAMP: dt90-19120070823102022
INSTDATE: Dec 10 2007 14:07
STATUS: completely installed
FILES: 38 installed pathnames
6 shared pathnames
12 directories
23 executables
20860 blocks used (approx)

Playback is entirely broken in CS6 and Elements

I have a frustratingly persistent problem: When I hit space or "play" to play my timeline, nothing at all happens.
This happens regardless of what files I put in the timeline (it even happens if the timeline has just an audio file or a photo). The program lets me put clips into the timeline, render them, and scrub through them manually by dragging the slider. It just won't play the timeline.
The problem only began after I'd already used the program normally for about an hour. And bafflingly, every now and then—twice so far in my few dozen attempts to use the program—this problem disappears and the timeline plays just fine.
An Adobe Support employee used screenshare to try fixing the problem by creating a root user account for me, but using it changed nothing.
Technical details:
New iMac 27" with a clean install of OS X Mountain Lion 10.8.2
Adobe Premiere Pro CS6 and Adobe Premiere Elements 11 (problem occurs with both)
Fixes I've tried:
Logging in as root
Replacing com.apple.audio.AggregateDevices.plist by deleting/renaming it (I don't have the file)
Replacing com.apple.audio.AggregateDevices.plist by creating an aggregate device with Audio MIDI Setup (does not create file)
Repairing disk permissions, repairing disk, then trying all the above
Installing new NVIDEA driver
Uninstalling and re-installing Premiere
My problem seems very similar to another user's unresolved reported issue: http://forums.adobe.com/message/4822956 I've messaged that user asking if they found a solution, but received no reply.

Just to get this out of the way early, as a test, make sure that the Timeline Panel has focus, and try the Spacebar again. While the Timeline will play, with many other Panels having focus, I have encountered times, where, say focus on the Project Panel, will not allow the Timeline to play.
In PrPro, there is an orange border around any Panel with focus, but PrE is not so easy to spot, unless you are looking at the Timeline Panel's border, when you click on it, and notice a very subtle (I mean VERY subtle) change.
Good luck,
Hunt

Aperture 3.3 - The Previews mechanism appears to be entirely broken.

TL;DR: In Aperture 3.3 are your Previews in Aperture there when they shouldn't be, and not there when they should?
Try confirming this:
I created a new Library with a couple of small albums for testing. The Previews folder in .aplibrary is empty even when New Projects Automatically Generate Previews is on, Maintain Previews for Project is selected, and when I go to the photos and select "Update Preview" I get a message saying the Preview is already up to date. When holding down the option key and doing a Generate Preview, I still get nothing in the Previews folder, regardless of how many photos I do this with or what resolution/quality I have my previews set to.
On the other hand, if I turn off New Projects Automatically Generate Previews, deselect Maintain Previews for Project, and select photos and then "Delete Previews", I'm still able to drag photos outside of Aperture (and get the plus sign as well as count of photos), and they copy to the Finder as well as other apps in full resolution. Additionally when I go to iTunes, it will sync all of the items in the Project even though I've done all of this to kill off Previews (and there are no previews in the aplibrary/Previews folder).
I should note that I'm not doing anything weird here. For example, I only *looked* in .aplibrary when things weren't working and would never move or mess with anything in there directly.
This is a double problem and pretty serious:
1) Previews functionality is gone
2) Syncing with iOS devices can't be done using just the Previews, meaning it will sync everything, when combined with the Stacks Pick bug, this is a nightmare.

Hi,
I think your issue is related to the buggy behaviour I described in this thread:
Aperture 3.3 Bug? Dragging to external editor can modify the original
My suspicion: Aperture 3.3 simply, clandestinely does not create previews, if the original image size is smaller than the pixel size for the previews.
What are the sizes of the images in your project compared to the preview settings?
If images do not have previews, because Aperture did not create them, then I found that Aperture passes the mster instead (or a copy of the master, if you drag to the desktop).
Regards
Léonie

I have "broken" both Firefox and IE. Neither will open a new tab after I click a link. My entire browsing experience is compromised. Help

That's about it. Neither browser will open a second tab. Usually cant get to AOL mail. When I do and click on a message I only get a BLANK screen. Using Windows 7.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Eveytime i go to my iphone pictures the photos turns to be blurry or a ''?'' picture. i tried ''refreshing'' my entire phone again but it didnt help. now everytime i take pictures, it's either broken or blurry.

i need help..

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Images broken in design view on new computer paths leading to old harddrive?

I recently got a new imac and installed cs5 dreamweaver ( I was using dreamweaver 8 but it no longer works in mountain lion) . I redfined the site all was fine then I must have done something and now suddenly all my images are broken in design view and in brower and live view! The site shows the images online from the server but everything is broken in design view. The directory is a mess as I used way too may subfolders when I first did the site but it's too large to start over. I tried deleting the site from my harddrive all together and creating a new folder for it and just getting the entire site from the server but the images still don't show. I don't want to have to go to every page on the site and fix broken links! I can pull an image into a page by browsing to the folder on my harddrive but they are not appearing anymore on their own. If the images were uploaded originally from another computer and the folder being used now for the site on my harddrive is different that won't break the image paths will it? It all worked fine until a few days ago. What I don't understand is I thought the images wouldn't show if they were only on the server and not on my harddrive but since I just GOT the site from the server, all the images ARE now on my harddrive in the new folder so why still nothing showing? I I tried right clicking the broken images and showing design notes they seem to be lookin for a path to my old computer where the harddrive was named differently than it is now. Is there ANY way to fix this? What about renaming my harddrive to the old name?
Greatful for any advice but I am very much a newbie so not sure I will be able to do what I need to.
Mary Ann

Spaces in folder/filenames are not a good practice. Space are converted to %20 on the server. DW's Design View often can't reconcile this. Best advice is to remove the spaces and use underscores _ or hyphens -
Rename this:
http://www.thedqtimes.com/Jane_site/Lake%20Effects/lakeeffectsjdaughters.jpg
http://www.thedqtimes.com/Becky%20H%20stories/Untitled-1.jpg
To this:
http://www.thedqtimes.com/Jane_site/Lake_Effects/lakeeffectsjdaughters.jpg
http://www.thedqtimes.com/Becky_H_stories/Untitled-1.jpg
Also, you have a misplaced <head> tag. It needs to be above the Dynamic drive Javascript code.
<head>
<script> </script>
<style> <style>
</head>
Some pages are missing an HTML doc type declaration. This sends browsers into Quirks Mode.
Use validation tools to check for other code errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Version 23 very broken.

locking as a duplicate of this - https://support.mozilla.org/en-US/questions/968545''
Between last night and tonight, suddenly I can't load any pages unless I flip back and forth between I.E Tabs. Only difference: Firefox did a bloody update. Why is it that nowadays when a program updates, it always ends up being glitchy or fails entirely. Aren't updates supposed to IMPROVE the program, not break what was already working?
This problem happens on Facebook, twitter, Goodreads, Google, this page... everything. What is the use of having a browser that doesn't work. Come on Mozilla. Please let me roll back to 22. At least that worked. Sorry for the grump here, but I've truly had enough of programs self-"updating" into a version that is crap. With all that programmers have learnt over years of computing, this should not happen any more. If you're going to put out an "update", at least make sure it works fully first. We're not your lab rats for testing.
I've already restarted twice, and once more in safe mode, so please no one give me all the basic advice. Just someone tell the blokes at Mozilla that their update is broken, and they need to patch it. Meanwhile, I'll just run my business loading pages twice in two different browser tabs... or, after more than six years and twenty different version numbers, I might just drop Firefox altogether.
And you know what, till I stuffed around for almost twenty minutes, I couldn't even add my Troubleshooting info from the button below. Guess why? That's broken too. As is the button to enter this form, which took me another half hour. Please fix this.
"application": {
"name": "Firefox",
"version": "23.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.1; rv:23.0) Gecko/20100101 Firefox/23.0",
"supportURL": "http://support.mozilla.org/1/firefox/23.0.1/WINNT/en-GB/"
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"accessibility.typeaheadfind": true,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk_cache_ssl": false,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.places.smartBookmarksVersion": 4,
"browser.privatebrowsing.dont_prompt_on_enter": true,
"browser.search.useDBForOrder": true,
"browser.sessionstore.restore_on_demand": false,
"browser.startup.homepage_override.mstone": "23.0.1",
"browser.startup.homepage_override.buildID": "00000000000000",
"browser.tabs.warnOnClose": false,
"dom.w3c_touch_events.expose": false,
"dom.max_script_run_time": 0,
"dom.max_chrome_script_run_time": 0,
"dom.ipc.plugins.enabled.npietab2.dll": true,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "23.0.1",
"font.internaluseonly.changed": true,
"gfx.blacklist.suggested-driver-version": "257.21",
"gfx.direct3d.checkDX10": false,
"gfx.direct3d.last_used_feature_level_idx": 1,
"keyword.URL": "http://www.google.com.au",
"network.cookie.prefsMigrated": true,
"places.history.expiration.transient_optimal_database_size": 118026730,
"places.history.expiration.transient_current_max_pages": 73767,
"places.database.lastMaintenance": 1376906457,
"plugin.importedState": true,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"privacy.cpd.offlineApps": true,
"privacy.cpd.sessions": false,
"privacy.donottrackheader.enabled": true,
"privacy.sanitize.timeSpan": 4,
"privacy.sanitize.migrateFx3Prefs": true,
"security.warn_viewing_mixed": false,
"storage.vacuum.last.places.sqlite": 1376823292,
"storage.vacuum.last.index": 0
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 10",
"adapterDescription": "NVIDIA ION",
"adapterVendorID": "0x10de",
"adapterDeviceID": "0x0876",
"adapterRAM": "256",
"adapterDrivers": "nvd3dum nvwgf2um,nvwgf2um",
"driverVersion": "9.18.13.1100",
"driverDate": "1-10-2013",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.2.9200.16571",
"webglRenderer": "Google Inc. -- ANGLE (NVIDIA ION)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10",
"version": "4.10"
"NSS": {
"minVersion": "3.15 Basic ECC",
"version": "3.15 Basic ECC"
"NSSUTIL": {
"minVersion": "3.15",
"version": "3.15"
"NSSSSL": {
"minVersion": "3.15 Basic ECC",
"version": "3.15 Basic ECC"
"NSSSMIME": {
"minVersion": "3.15 Basic ECC",
"version": "3.15 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Ant Video Downloader",
"version": "2.4.7.8",
"isActive": true,
"id": "[email protected]"
"name": "Autofill Forms",
"version": "0.9.9.0",
"isActive": true,
"id": "[email protected]"
"name": "BugMeNot",
"version": "2.2",
"isActive": true,
"id": "{987311C6-B504-4aa2-90BF-60CC49808D42}"
"name": "Download Statusbar",
"version": "0.9.10",
"isActive": true,
"id": "{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}"
"name": "English (Australian) Dictionary",
"version": "2.1.2",
"isActive": true,
"id": "[email protected]"
"name": "Facebook Share Button",
"version": "1.9",
"isActive": true,
"id": "{d4e0dc9c-c356-438e-afbe-dca439f4399d}"
"name": "Facebook Translate",
"version": "1.2.7",
"isActive": true,
"id": "[email protected]"
"name": "Flagfox",
"version": "4.2.11",
"isActive": true,
"id": "{1018e4d6-728f-4b20-ad56-37578a4de76b}"
"name": "Flashblock",
"version": "1.5.17",
"isActive": true,
"id": "{3d7eb24f-2740-49df-8937-200b1cc08f8a}"
"name": "Garmin Communicator",
"version": "4.0.4",
"isActive": true,
"id": "{195A3098-0BD5-4e90-AE22-BA1C540AFD1E}"
"name": "Ghostery",
"version": "5.0.3",
"isActive": true,
"id": "[email protected]"
"name": "HP Detect",
"version": "1.0.16.0",
"isActive": true,
"id": "{ab91efd4-6975-4081-8552-1b3922ed79e2}"
"name": "IE Tab 2 (FF 3.6+)",
"version": "4.12.22.2",
"isActive": true,
"id": "{1BC9BA34-1EED-42ca-A505-6D2F1A935BBB}"
"name": "iViewFox",
"version": "1.4.0",
"isActive": true,
"id": "[email protected]"
"name": "Lazarus: Form Recovery",
"version": "2.3",
"isActive": true,
"id": "[email protected]"
"name": "Memory Fox",
"version": "7.4",
"isActive": true,
"id": "{E173B749-DB5B-4fd2-BA0E-94ECEA0CA55B}"
"name": "Show/hide passwords",
"version": "0.1",
"isActive": true,
"id": "[email protected]"
"name": "Tab Slideshow",
"version": "5.0",
"isActive": true,
"id": "{16466865-007f-4ce4-aeb5-a0aa8b34c61a}"
"name": "Troubleshooter",
"version": "1.1a",
"isActive": true,
"id": "[email protected]"
"name": "TweetRight",
"version": "0.43.1",
"isActive": true,
"id": "jid1-SmvuJ9Cq3Cx13w@jetpack"
"name": "Firefox Synchronisation Extension",
"version": "1.7.110.333",
"isActive": false,
"id": "[email protected]"
23.0
Windows 7
* Shockwave Flash 11.8 r800
* Garmin Communicator Plug-In 4.0.4.0
* 5.1.20513.0
* Foxit Reader Plug-In For Firefox and Netscape
* IE Tab 2 Plug-in for Mozilla/Firefox
* Next Generation Java Plug-in 10.9.2 for Mozilla browsers
* NPRuntime Script Plug-in Library for Java(TM) Deploy
* NPWLPG
* VLC media player Web Plugin 2.0.2
* HP Product Detection Plugin
* HP Active Check Plugin
* Adobe Shockwave for Director Netscape plug-in, version 11.5

We consolidated the search engine preferences due to malicious add-ons abusing the search engines in Firefox to raise revenue for themselves by hijacking users and making it difficult to restore the search engine defaults. You have a few work arounds for the issue, the easiest of which will be to install https://addons.mozilla.org/en-US/firefox/addon/keyword-search/

Every single song I delete from iCloud on my Mac remains listed in the Music app on my iPhone 4S, and then becomes broken -- What the heck?

Hello,
So this is annoying me to no end because I just spent $25 to sign up for iTunes Match and so far its wasted my time and given me nothing but a massive headache. This is obviously a major bug on the SERVICE END, not mine.
Starting with an empty iTunes library on my Mac, I began ripping my CDs in iTunes Plus AAC format the other night with the intent of matching & uploading my entire music library into iCloud for streaming & downloading to my iPhone 4S on the go. Simple in theory, right? After some basic tag editing -- changing genres, a simple alteration to a title here, deleting the composer there -- and then updating iTunes Match (Store > Update iTunes Match), I notice I'm getting duplicates of a bunch of my songs appearing on my iPhone. I haven't downloaded anything to the device, they're all just listed with the cloud icon next to them.
So I'm thinking, whatever, I screwed something up. I'm only several CDs into the process so I'll just delete the iTunes library and start over again. Shift + right click, delete everything. Do you want to delete these songs from iCloud as well? Yes. Update iTunes Match. There are 0 songs in iCloud. Okay.
The songs are still showing in my iPhone Music app. Strange. Swipe to delete does nothing, they're not on the device. They're pointing to files in the cloud that are either no longer there or somewhere that I cannot access anymore. Broken aliases. The album artwork still shows up, but playing the songs just kicks me back to the album menu. Navigating to Settings > General > Usage > Music shows me there is no data on the device. 0 bytes.
One thing I notice is that sometimes after syncing a handful of these broken songs will show up in a "Purchased" playlist on my iPhone within the iTunes browser -- I haven't purchased any music from the iTunes store, not one song -- and inspecting them with right click > Get Info reveals them as Stream files, not iTunes Plus AAC files.
Turning iTunes Match off and on again both from within iTunes and on my iPhone does nothing.
Syncing wirelessly or via USB does nothing.
Backing up and restoring my iPhone does nothing.
Double clicking the Home button and quitting the Music process, then opening it again does nothing.
Hard resetting the iPhone does nothing.
This is something that's happening with my Apple ID on the service end, not locally or on the user end. As long as iTunes Match is turned on in my iPhone settings, all of this broken music -- everything I've matched to iCloud and deleted -- shows up. I've done everything within the parameters of proper usage, and iTunes tells me there is nothing in iCloud after it updates but my phone keeps seeing crap that isn't -- or shouldn't be -- there.
I WANT to use iTunes Match, I just paid 25 freaking dollars for it, but its completely busted for me right now and I know ripping and matching some more CDs is just going to make it worse and populate my iPhone with an even bigger broken library. I just ripped and matched one more CD an hour ago without editing any of the tags, just let iTunes Match do its thing, and then after right clicking and following the prompts to delete the 18 songs both from both iTunes AND iCloud its still showing up on my iPhone. Busted like all the others.
Can we please get an update on this as soon as possible? This is driving me nuts and I don't know what else to do.

It's a slightly convoluted process.
Disable iTunes Match on your iPhone
Settings > Music > Itunes Match
Now, make sure you've killed the Music app by double-tapping the home button, and deleting the app there where it is running. Important step. The app should not be active.
Next step:
Settings > General > Usage (it takes a while to load) > then delete the Music app there
Power your phone down, and back up again.
Sync your music via iTunes like you always have ...
... and this should fix your problem.

ZFS broken entirely?

Similar Messages

Maybe you are looking for