Zfs does not reclaim space after database table dropped

Our Oracle DBA dropped 200GB of tables and zfs has not reclaimed the space. I have made sure we did not have any snapshots. When I do a du -h on the filesystem, it shows the correct space, but zfs list does not show the extra space. Any ideas?

Hi,
You should make sure that the removed Oracle Datafiles were on a ZFS file system. If they were under an UFS file system, the ZFS space will remain unchanged.
Regards,
Rei

Similar Messages

Nas drive does not recalculating space after deleting files on Nas Drive??

Greetings to Respected expert,
Actually we have configure Window server 20082 Storage server.We have NAS drive configured which have 300GB quota limit. The actual data in the folder is 185 GB but it shows only 15 GB free and shows a warning .Please assist me why NAS server does not re-calculate
the space after deleting files or does not leave space. Pardon me if I am not able to clear you my problems.this is very urgent for me.
Thanks And Regards
Rajnish Singh

Hi Rajnish,
As you mentioned "quota limit", it is set via FSRM or specific function on NAS?
Meanwhile could you confirm the number 185GB is accurate? Sometimes a part of used space is just not calculated. You can confirm with checking the total space on NAS locally.
If the number is correct and quota is set via FSRM, check if it is the Disk Quota which not re-calculated the released space. Try to clear the Quota setting and reconfig with 300GB limitation and see if issue still exists.
If you have any feedback on our support, please send to [email protected]

After i empty trash (the secure empty doesn't work either), the system does not reclaim the free space.

After i empty trash (the secure empty doesn't work either), the system does not reclaim the free space.
I need to run the erase free space option from the disk utility every time...which is really annoying and time consuming.
Any ideas how to solve this?
Thanks in advance =)

There is a thing in iPhoto whereby the first time you delete a photo it asks if you want to delete or just remove from the album, something like that. Unfortunately it is one of these things with a "don't ask me again" checkbox. Now, "deleting" photos only removes them from the album they are in. To actually trash them I must then go to "all photos" and find them, to send them to the trash. To help find them, what I do is rename them zzz or something, so sorting them will get them to the bottom of my collection. Just maybe your photos are still lurking around?

Table /xyz/abc does not exist in the database

Hi experienced developers,
I created two transparent tables in customer name space in development system, transport to quality together with program using the tables, everything fine, no errors, no warnings.
Then transported to production. No errors, no warnings. Detailed protocol shows tables have been activated, no errors or warnings.
First try to use the program gives a dump.
line 1191:
""/xyz/abc" is not defined in the ABAP Dictionary as a table, p"
"rojection view, or database view."
Double-click on the table in program code gives a popup information message
Table/xyz/abc does not exist in the
database
After acknowleding the popup, the usual dictionary entry is shown, table is active. Utilities -> database object -> Display leads to an empty screen
Fields of /xyz/abc
Fld name Position Data Type Length Decimals Not null Default
Indexes for /xyz/abcI
Utilities -> runtime object -> Display shows the table name followed by message
There is no active runtime object for ...
prededed by big icon exclamation mark.
We created a new transport with exactly the same result.
Basis people have no idea.
The only thing special (but OK I think) is that the tables have key fields only.
Database is Oracle 11.2.0.2.0, SAP ECC 6.0
SAP_ABA     701     0008     SAPKA70108     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0008     SAPK-70108INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0005     SAPKITLRD5     SAP Solution Tools Plug-In
SAP_BS_FND     701     0009     SAPK-70109INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0008     SAPKW70108     SAP Business Warehouse
SAP_AP     700     0022     SAPKNA7022     SAP Application Platform
WEBCUIF     700     0009     SAPK-70009INWEBCUIF     SAP WEBCUIF 700
Yes I know, this is a DDIC forum question but I hope for more (experienced) readers here.
Thank you all for any hint leading to a solution.
Best regards
Clemens Li

Hi,
thank you for the comments although it does not help.
Here is the excerpt from productive system import protocol (original table names replaced as customer requirement)
*** Activate objects at level 1
Too low cost (2.100) for parallel processing. Minimum: 6.000
* Synchronous execution, no parallel processing *
Activate table /xyz/abcd1
Table /xyz/abcd1 was activated successfully
Activate table /xyz/abcd2
Table /xyz/abcd2 was activated successfully
Synchronous processing: 4 sec., 2 objects, 2.100 costs
      Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
      Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2
Objects not activated........................: 0
Activated objects with errors in dependencies: 0
Objects activated with warning...............: 0
Successfully activated objects...............: 2
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
      Statistics on Activated and Deleted Objects
End phase 002 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: ENNIPROD_10
Return code..............: 0
Phase 001..................: 00:00:04 (Object Activation)
Phase 002..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:05
Date, time...............: 08.03.2012, 16:30:43
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20120308163043
Ended with return code: ===> 0 <===
Actually, I don' understand it.
Regards,
Clemens

Table ZCHECKPICK does not exist in the database

Hi!
   I have a table "ZCHECKPICK" no "MANDT - Client".
   Then I inserted a field "MANDT - Client" and executed SE14 to "Active and adjust database".
    The table is now "does not exist in the database" but the struture is ok.
What do i do to get the table in DataBase again?
<Priority normalized in subject line>
Edited by: Vinod Kumar on Sep 13, 2011 9:32 AM

Dear Clayton,
you can try a few things
1) generate/activate the table prior to call SE14.
2) after confirming that the table is well generated, go to SE14 and choose "Delete Database Table"
3) then, still on SE14, click on "Activate and Adjust database"
[http://imageshack.us/photo/my-images/607/20110913010743.jpg/]
That should fix it.
Kind Regards
/Ricardo Quintas

Licecache table missing Table MATRIXINDE does not exist in the database wit

Hello,
We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
2) once we give the IP address as livecache server we can start the live cache server. Bure there is only two tables in it
when we run
transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
runtime error DBIF_RSQL_TABLE_UNKNOWN
When we look into the tables there are only 2 tables in it
AAPSYSNAME
LCA_WARNINGS
when I compare with other system...it is missing a lots of other tables..
We did re-initialized the livecache.
Appreciate your help in this

Hello Sudhir,
1) Did you create the SAP ticket where this issue is reported?
2) It's good to know more details about the APO version, liveCache/LCA versions on your
    source & target systems.
    What note or document did you follow to do a system copy of our APO system?
3) Please pay attention to the recommendations in the SAP notes:::
         877203     Post steps after the Homogenous liveCache copy usi u2026
         886103    System Landscape Copy for SAP SCM
Thank you and best regards, Natalia Khlopina

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           SAPLCLVF
Application Component CA-CL-CL
Date and Time          11.06.2014 12:08:28
Short text
     A table is unknown or does not exist.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCLVF" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A table is referred to in an SAP Open SQL statement that either does not
      exist or is unknown to the ABAP Data Dictionary.
     The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104     if dupl = kreuz.
105       insert auspc_v2 client specified from table auspcv2
106                              accepting duplicate keys.
107     else.
108       insert auspc_v2 client specified from table auspcv2.
109       if syst-subrc ne 0.
110         message a585 with tabausp.
111       endif.
112     endif.
113     refresh auspcv2.
114   endif.
115   read table auspcv3 index 1.
116   if syst-subrc = 0.
117     if dupl = kreuz.
118       insert auspc_v3 client specified from table auspcv3
119                              accepting duplicate keys.
120     else.
121       insert auspc_v3 client specified from table auspcv3.
122       if syst-subrc ne 0.
123         message a585 with tabausp.
124       endif.
125     endif.
126     refresh auspcv3.
127   endif.
128   read table auspnv1 index 1.
129   if syst-subrc = 0.
130     if dupl = kreuz.
131       insert auspn_v1 client specified from table auspnv1
132                              accepting duplicate keys.
133     else.
>>>>>       insert auspn_v1 client specified from table auspnv1.
135       if syst-subrc ne 0.
136         message a585 with tabausp.
137       endif.
138     endif.
139     refresh auspnv1.
140   endif.
141   read table auspnv2 index 1.
142   if syst-subrc = 0.
143     if dupl = kreuz.
144       insert auspn_v2 client specified from table auspnv2
145                              accepting duplicate keys.
146     else.
147       insert auspn_v2 client specified from table auspnv2.
148       if syst-subrc ne 0.
149         message a585 with tabausp.
150       endif.
151     endif.
152     refresh auspnv2.
153   endif.

Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano

Table Z does not exist in the database

Hi,
I have created a Z table and modified the DataType from NUMC to DEC and transported to Quality server
and it is giving an information error that (Table Z does not exist in the database) then once again
i modified the DataType from DEC to NUMC and transported to Quality server then still it is giving an information error that
(Table Z does not exist in the database) please help me out in this issue.
Thanks in advance.

Hi Jayanthumer,
Have you Activated (Ctrl + F3) the Table in SE11 before transporting to Quality server ?
Try to activate (Ctrl + F3) the table in SE11 of your Quality server...
It may not be imported properly into Quality server...
Ask to BASIS person about errors/warnings while importing to Quality Server..
Also activate all dataelement and domains.... make sure all things are active...
Once you activate it then it will create the table in database... till then there will be no table in database...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

After i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

When I download an app I had to put in payment settings cause it was expiring,after that it was downloading but then said 'cannot download because your ipad does not enough space' but I actually have 3.3 gb while the game is 1.4 .pls tell what to do

When I download an app I had to put in payment settings cause it was expiring,after that i paid and it was downloading but then said 'cannot download because your ipad does not enough space' but I actually have 3.3 gb while the game is 1.4 . I tried rebooting and powering off but still it didnt work even when I clicked the app( which still hasn't downloaded yet). What do I do now?

The GB size of the download file is the compressed size (like .zip or .dmg). When the file is installed/uncompressed it can be 2-3 times larger.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Database schema SCM does not contain the associated database objects

I am getting the following error when i am trying to migrate the form to apex using application migration.
"*Database schema SCM does not contain the associated database objects for the project, aafs.*
*Ensure the database schema associated with the project contains the database objects associated with the uploaded Forms Module .XML file(s).* ".
Actully i am having one schema which i named as SCM, and i have defined one table TT.
I created one form test.fmb in which i used TT table.its compiled successfully.
Then i generated the xml file using frmf2xml from fmb file. After that, I created the project in appication migration wizard in SCM schema.
Project creattion is working fine.but when i m trying to create application,it is showing me above error.
can any one help in solving this problem.

Hi Hilary,
Thanks for your response/feedback.
1. The schema associated with the project does not contain the necessary objects Can you please verify that the schema associated with your Forms conversion project does in fact contain the objects associated with the uploaded files. Could you also verify that the object names referenced in the error message do not exist within the schema associated with your workspace. Ensure that the schema associated with the project contains the necessary database objects before proceeding to the generation phase of the conversion process.
Ans:
Yes it does contain the objects (See results from SQL query Commands below):
SELECT MWRA_CONTRACT_NO, OLD_CONTRACT_NO FROM PROJECTS@CONTRACT_LX19.MWRA.NET
ORDER BY MWRA_CONTRACT_NO
000000569 551TA
000000570 553TA
000000575 560TA
000000576 561TA
000107888 502TA
000108498 500TA
000108502 503TA
2. The block being converted contains buttons, which may have been incorrectly identified as database columns, and included in the original or enhanced query associated with your block This is a known issue ,bug 9827853, and a fix will be available in our upcoming 4.0.1 patch release. Some possible solutions to this issue are:
-> delete the buttons before generating the XML
-> delete the button tags from the XML
-> add "DatabaseItem=No" for the button in the XML file before importing it in Apex.The button is excluded when creating the Application.
Ans
yes it does contain push buttons to transfer to another forms and these are defined as Non data base items. Parial XML code provided below:
- <Item Name="REPORTS" FontSize="900" DirtyInfo="true" Height="188" XPosition="4409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="REPORTS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
<Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('REPORT_1');" />
</Item>
- <Item Name="TRACKHDR" FontSize="900" DirtyInfo="true" Height="188" XPosition="3409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="TRACK" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
<Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('TRACKHDRS');" />
</Item>
- <Item Name="SUBAWRD" FontSize="900" DirtyInfo="true" Height="188" XPosition="2429" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3719" FontSpacing="Normal" Label="SUBAWARDS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
3. If you are still experiencing issues, then please create a testcase on apex.oracle.com and update this thread with the workspace details so I can take a look.
Test case details are given below. It was created per ORACLE for open Service Request Number 3-1938902931 on ORACLE Metalink.
Workspace: contract4
username: [email protected] (my email)
Password: contract4
Comments:
For my migration/testing purpose a dabatase link and synonyms have been setup by our ORACLE DBA. Could this be causing this problem?
Do we know when the fix 4.0.1 patch release will be available?
Thanks for your help.
Indra

View-does not exist on the database

Hi Experts,
Our Data Source/Extract Structure (R/3) is based on a view.
There is an Issue with the View/DAta Source
If i go to SE11>view Name> Display then i am getting
'View ZART_ATTRS is not in the database' and then the next screen is the view definition
This is a database view which is defined in the ABAP/4 Dictionary but does not exist on the database. No data can be read for this reason
If i go to RSO2 and enter data source name and select display...
Then it will display data source status as 'Saved' how can i activate it
and i go to RSA6 select my Z data source which is based on the above view....context menu display data source/Check data source...when i get error
'Only Tables and views are permitted for extraction'
How can i overcome it

Hi,
As your view is existing in ABAP DICTIONARY , you need to take help of your DBA to get this created in the underlying database. This can be created using Database utility se14 transaction code. But it is good to have your DBA involved so that you have proper table space allocated to it.
Hope this helps..
Regards
Manga(Assign points if it helps)

Error: SNAP_ADT does not exist in the database - manual check required

Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
Sury

Hi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE)

ERROR: local PSE does not match original in database

Hi Exports,
   I have problem with SSO configuration,
The error message is :
Own System Data
SAP System ECC Client 000
Profile Parameters login/accept_sso2_ticket = 1
     Logon Tickets Are Accepted
Certificate List
The Certificate List Is Used To Verify the Digital Signature for the Logon Ticket
H:\usr\sap\ECC\DVEBMGS01\sec\SAPSYS.pse
Owner                        CN=X85
Issuer                       CN=X85
Serial Number                00
Owner                        CN=SSO, O=sapmarkets, C=US
Issuer                       CN=SSO, O=sapmarkets, C=US
Serial Number                00
Owner                        CN=DSZ, OU=IDES, O=mySAP.com Workplace, C=DE
Issuer                       CN=DSZ, OU=IDES, O=mySAP.com Workplace, C=DE
Serial Number                00
Owner                        CN=ID3
Issuer                       CN=ID3
Serial Number                00
Owner                        CN=IDES Workplace Center, OU=IDES, OU=SAP AG, O=mySAP.com Workplace, C=DE
Issuer                       CN=IDES Workplace Center, OU=IDES, OU=SAP AG, O=mySAP.com Workplace, C=DE
Serial Number                00
Owner                        CN=JE3
Issuer                       CN=JE3
Serial Number                00
Owner                        CN=E6T
Issuer                       CN=E6T
Serial Number                00
Owner                        CN=BI7
Issuer                       CN=BI7
Serial Number                20090820201039
     This Is the Certificate of the Issuing System for Logon Tickets
Owner                        OU=J2EE, CN=BI7
Issuer                       OU=J2EE, CN=BI7
Serial Number                00
Owner                        CN=US01
Issuer                       CN=US01
Serial Number                00
Owner                        CN=EP7, O=SAP Training
Issuer                       CN=EP7, O=SAP Training
Serial Number                EBB24ECD
Owner                        CN=CORPORATEPORTAL
Issuer                       CN=CORPORATEPORTAL
Owner                        CN=IDES Portal 5.0
Issuer                       CN=IDES Portal 5.0
Serial Number                00
Owner                        CN=HR Vertrieb demoportal
Issuer                       CN=HR Vertrieb demoportal
Serial Number                00
Owner                        CN=SAPUK ZE6 Sales Portal Demo
Issuer                       CN=SAPUK ZE6 Sales Portal Demo
Serial Number                00
Owner                        CN=GFI Demo- & Technology-Center
Issuer                       CN=GFI Demo- & Technology-Center
Serial Number                00
Owner                        CN=HR Vertrieb demoportal productiv
Issuer                       CN=HR Vertrieb demoportal productiv
Serial Number                00
Owner                        CN=SP4C, OU=SAP Training, O=SAP
Issuer                       CN=SP4C, OU=SAP Training, O=SAP
Serial Number                00
Owner                        CN=Portal, OU=IBSDI, O=SAP-AG, C=DE
Issuer                       CN=Portal, OU=IBSDI, O=SAP-AG, C=DE
Serial Number                00
Owner                        CN=EP50, OU=Solution Centre productive, O=CRM GBU, C=DE
Issuer                       CN=EP50, OU=Solution Centre productive, O=CRM GBU, C=DE
Serial Number                00
Owner                        CN=EP6, OU=SPS, OU=SAP, O=SAP Trust Community, C=DE
Issuer                       CN=EP6, OU=SPS, OU=SAP, O=SAP Trust Community, C=DE
Serial Number                00
Owner                        CN=E6T, OU=Training, OU=SAP, O=SAP Trust Community, C=DE
Issuer                       CN=E6T, OU=Training, OU=SAP, O=SAP Trust Community, C=DE
Serial Number                00
Owner                        CN=EP6, OU=PortalPlatformTeam, OU=EnterprisePortal, O=SAP Trust Community, C=DE
Issuer                       CN=EP6, OU=PortalPlatformTeam, OU=EnterprisePortal, O=SAP Trust Community, C=DE
Serial Number                00
Systems for Which ECC Accepts Verified Logon Tickets
The Access Control List Defines Which Systems the Verified Logon Tickets Are Accepted From
Table     TWPSSO2ACL
SAP System BI7 Client 000
Owner                        OU=J2EE, CN=BI7
Issuer                       OU=J2EE, CN=BI7
Serial Number                00
SAP System BI7 Client 001
Owner                        CN=BI7
Issuer                       CN=BI7
Serial Number                20090820201039
     This Is the Certificate of the Issuing System for Logon Tickets
SAP System ECC Client 000
Owner                        CN=ID3
Issuer                       CN=ID3
Serial Number                00
SAP System ECC Client 001
Owner                        OU=J2EE, CN=BI7
Issuer                       OU=J2EE, CN=BI7
Serial Number                00
Application server PSE:
ID:           CN=ID3
Namespace:
Profiles:     H:\usr\sap\ECC\DVEBMGS01\sec\SAPSYS.pse
OK: file available, length:                                      15.455
ERROR: local PSE does not match original in database.
Kindly help me to solve this problem.
Thanks
Jibin.

Sure. Tried two ways:
a)
1. Delete existing System-PSE
2. Import SAPSYS.PSE
3. System-PSE remains empty (red x)
Leaving STRUST and calling it again: No System-PSE
b)
1. Create new System-PSE ok - everything is in place
2. Import needed SAPSYS.PSE
3. Certificate field is populated with that data
Leaving STRUST and calling it again: The imported SAPSYS.PSE data is gone and System-PSE is coming up with newly created certificate data
Example:
1. Create New
Inhaber        CN=SID
Aussteller     CN=SID
Seriennummer   20131211053554
Gültig von     11.12.2013 05:35:54 bis    01.01.2038 00:00:01
Prüfsumme      BE:7D:67:FE:7F:F6:8B:85:C5:63:BF:BC:74:BE:7D:4D:67:FE
2. After Import
Inhaber        CN=SID
Aussteller     CN=SID
Seriennummer   00
Gültig von     01.10.1997 00:00:00 bis    01.01.2038 00:00:00
Prüfsumme      8E:0F:BC:54:98:5D:02:84:CB:F0:BE:7D:4D:67:32:80:62:CD
3. Leaving STRUST and re-entering
Inhaber        CN=SID
Aussteller     CN=SID
Seriennummer   20131211053554
Gültig von     11.12.2013 05:35:54 bis    01.01.2038 00:00:01
Prüfsumme      BE:7D:67:FE:7F:F6:8B:85:C5:63:BF:BC:74:BE:7D:4D:67:FE
Saving the PSE leads to an export to file dialog...
Distributing doesn't help either

Zfs does not reclaim space after database table dropped

Similar Messages

Maybe you are looking for