ZFS Full Filesystem -  Quick Question

Folks,
With traditional UFS filesystems, when it hits 100% a message similar to below is logged in /var/adm/messages
"NOTICE: alloc: /var: file system full"
I'm wondering if zfs has a similar "NOTICE" as we have hit some 100% filesystems in the past and zfs has not logged anything to the messages file.
Is there a way to get zfs to log if a particular dataset within a storage pool hits 100%
TIA

What is a real "volume" and how would it be different from an emulation of one?
Most uses of "volume" are as a logical construction (such as Sun Volume Manager or Veritas Volume Manager). So there's not much "real" about them.
ZFS also uses physical disks to store data that is accessed via a filesystem (or block device) interface. Like the other tools, it can store redundant information to increase availability in case of hardware failures, plus many other features.
Darren

Similar Messages

  • ZFS root filesystem & slice 7 for metadb (SUNWjet)

    Hi,
    I'm planning to use ZFS root filesystem in Sun Cluster 3.3 environment, as written in documentation when we will use UFS share diskset then we need to create small slice for metadb on slice 7. In standar installation we can't create slice 7 when we install solaris with zfs root, then we can create it with jumpstart profile below :
    # example Jumpstart profile -- ZFS with
    # space on s7 left out of the zpool for SVM metadb
    install_type initial_install
    cluster SUNWCXall
    filesys c0t0d0s7 32
    pool rpool auto 2G 2G c0t0d0s0
    so, my question is : "when we use SUNWjet (JumpStart(tm) Enterprise Toolkit) how we can write the profile similar to above jumpstart profile"?
    Thanks very much, for your best answer.

    This can be done with JET
    You create the template as normal.
    Then create a profile file with the slice 7 line.
    Then edit the template to use it.
    see
    ---8<
    # It is also possible to append additional profile information to the JET
    # derived one. Do this using the base_config_profile_append variable, but
    # don't forget to fill out the remaining base_config_profile variables.
    base_config_profile=""
    base_config_profile_append="
    ---8<
    It is how OpsCentre (which uses JET) does it.
    JET questions are best asked on the external JET alias at yahoogorups (until the forum is setup on OTN)

  • Installing OBIEE on Windows 7, quick questions

    Dear Experts,
    Last year, I struggled installing OBIEE on Linux 5.5.
    Now I want to install it on Windows 7 Ultimate.
    It will be stand alone, for my own use only.
    Both a client, and a server.
    Some quick questions:
    1)
    Does the Windows server need to have a Domain (as Linux did)?
    (I'm having some trouble with the same dummy domain that worked fine
    in Linux, since it doesn't exist on the web.)
    2)
    Does the Windows server/client require a loopback adapter?
    If so, does it require a static IP?
    3)
    Does the windows server/client require a static IP address?
    4)
    If static IP addresses are required for both 2 and 3,
    is the static IP address supposed to match, or be different?
    I hope these questions aren't too dumb. But I haven't found
    anything online addressing them for windows yet.
    Thanks a lot!

    Hi,
    1)
    Does the Windows server need to have a Domain (as Linux did)?
    (I'm having some trouble with the same dummy domain that worked fine
    in Linux, since it doesn't exist on the web.)
    A. Not required.
    2)
    Does the Windows server/client require a loopback adapter?
    If so, does it require a static IP?
    A. Yes it is require for Loopback adapter and static ip for installation -- Client installation is not required -- You can go for Simple installation in your laptop.
    3)
    Does the windows server/client require a static IP address?
    A. Yes
    4)
    If static IP addresses are required for both 2 and 3,
    is the static IP address supposed to match, or be different?
    A.
    Please refer my blog.
    http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
    Please verify the below steps.
    1. Please check whether are download 64 bit software or not.
    2. First you have to install jrockit-jdk1.6.0_31-r28.2.3-4.1.0
    3. before installing software you have to give full permissions to everyone on your installation location drive (C drive or D drive).
    4.Create Looppack Adapter.
    5. Database installation 11g 64 bit.
    6. RCU 32 bit
    7. OBIEE 11.1.1.6 64 bit
    Hope this help's
    Thanks,
    Satya

  • Quick question concerned with external HD space

    just a quick question
    if TM only backs up files that have changed since the last backup
    why does every time it back up i end up with a folder in my external HD (that acts as a time machine) that is the same size of the hard drive?
    (e.g im using up 70 gigs on my macbooks HD..every time i back up with TM i end up with 70 gigs less on the external..should i just lose the space of the changed folders? :S)

    That's the "magic" (or "smoke and mirrors") of Time Machine.
    It makes "hard links" (sort of like multiple aliases) to the backups of the items that didn't change. That makes each backup, in effect, a full one.
    That's how when you go into the "Star Wars" display, it can show you a snapshot of your entire system at the time of any backup.
    If you look at your backups via the Finder, each dated backup folder is counting all those items that didn't change; so each one appears to be a full copy of your Mac. The sum of all the backup folders will be far greater than the amount used on the whole backup disk.
    By the way, be +*extremely careful+* using the Finder on your backups -- if you change, move, or delete anything there, you can hopelessly corrupt them.
    You can do everything you need to via TM.

  • Fixed and 2 quick questions (bios thread)

    Hi Everyone, i need your help again...
    [....]. since i installed Win2k3 on my system i was getting stability problems, especially lockups to black screen in games. On Win2k3 i was using the exact same drivers as I am going to list soon, and so I thought I'd install Windows XP again on a spare hard drive to see if this helped. I wish i'd never messed with my system my previous XP install was almost 100% stable, but that's another  story.
    Today I perfomed these steps in this order:
    1)Downloaded SP1a
    2)formatted new hard drive
    3)Booted from CD, did a Windows XP Pro install
    4)Started XP Pro, installed SP1a
    5)Installed Nforce system drivers and Display Drivers 29.42 (these were very good to me before...) and restarted
    6)Installed Speedtouch USB ADSL Drivers 2.0.1.2 and went online
    6.5)Enabled Hardware Acceleration on Displayt Properties
    6.7) Installed direct x 9.0a web setup.
    7)Did full windows update: all the critical stuff, most of the recommended (except MEssanger, Media Player and a couple others) and the CPU driver (left my Gfx and Sound on the above)
    8) After a restart started a game
    It lasted all of 10 seconds once I started playing.
    Ok, maybe 5 seconds. Smae as Win2k3!!! I was running bios default performance options, with APIC off... so I ran Prime 95 for a while, got no errors .... about to try a memtest86 but I'm pretty cetrain the memory is good never had trouble with it before at all and I've tested it before too.
    Can someone help me out? Here's my hardware config
    [size=11]
    AMD XP 1900+ (no overclock any more)
    MSI K7N420D MB
    2*512MB DDR266 Samsung 'Transcend' Memory (unbranded really) (16 chip DIMMs)
    Geforce 2 MX400 32MB SDRAM (unbranded - runs a little faster then onboard graphics)
    Adaptec 29160LP Scsi Card
    IBM 16000rpm 32GB SCSI Disk (UW-2)
    2*WD1000BB 100GB Western Digital IDE Drives (the normal ones with 2mb cache) in Software Raid - 0 on Promise card
    18GB Maxtor ATA66 IDE hd on Nforce, with CDR.
    a Promise Ultra TX100 Dual IDE Controller card (for CD Rom + expansion)
    Enermax 431w PSU / 7200rpm fan on heavy HS.
    Windows XP SP1 / DX 9.0a (going to reformat to Win2003)
    [/SIZE]
    I could really do with anyone's working driver config for a windows XP sp1a system, and how to build it from the bottom up. If a given driver config that works 100% for others fails for me I can start hardware troubleshooting and cursing loudly, otherwise with any luck it'll fix my problem.... please help me out i know there are people out there still running NForce 1 boards!
    Quick question that could help: what sound driver revision from windows update should i be using? I can get the archived ones....
    Thanks,
    Naveen.
    PS If i manage to fix it i'll update here, but i need a hand plz

    .... also, I have the same errors running the same game from Win2k3 on a SCSI drive through the PCI bus (adaptec 29160) on the 2.7 bios. It looks like there is still an issue with fast PCI bus read/writes, sound usage and AGP card usage causing crashes. Discounting the OS change and APIC, I have these scenarios:
    1) Game running off IDE drive on Nforce IDE ports: fine
    2) Running of IDE drives on promise controller card: fails, locks.
    3) Running off scsi drive on Adaptec 29160 card: fails, game locks.
    So we may still have an issue with PCI read/writes and stability on bios 2.7 and Nforce system drivers 2.03 ... which is big news really.
    I hope one of the moderators can put MSI in the picture and get them or NVidia to look into this. I can try eliminating APIC and the OS/Drivers from the issue, and install the game on all 3 drive configurations to confirm the above if necessary, but it's what it looks like from here. Using Performance bios defaults with no overclock, underclocking didnt help.
    Perhaps bios 2.4 will fix this in which case the bios still needs work, 2 years on.
    Naveen

  • Report Generation Toolkit Error Quick Question

    Hi,
         I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003.  I took this to my production machine and ")@#(&%(*#^%()^!!!"  The production machine has office 2007 and a fully licensed version of the RGT.  Both machines have LabVIEW 8.6.0.  I've read all the stuff about these errors and something about classes and dll's and whatnot's.  So my quick question, is:  Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect? 
    Solved!
    Go to Solution.

    Hi 
    Quick Answer: Probably
    Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
    Best Regards
    David
    NISW

  • Two quick questions about Library after moving beginning on a new computer

    Hi there,
    I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
    Just a couple of quick questions.
    1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file.  Is this incorrect? Should I have imported a different file? Should I have used the itl file instead? 
    If so, should I delete the library and start again?  (if this is the case, please suggest the best way of doing this without affecting my media)
    - a kind of sub-question to this one:  some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD.  Is there a way I can find out which ones havent been recognized by iTunes?  Whats the best way of getting them in to my library?
    2. Pretty much half of my podcasts have not been loaded in the new iTunes.  The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes.  When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes?  Or is there a risk that they will be deleted from my iPhone?
    Cheers,

    The .xml is lacking some information such as ratings, date added, and play count.  Using the .itl includes this information but cannot be imported using the method you did.
    A complete library is everything in the iTunes folder.  By using the method you did you left the artwork behind in the artwork folder on the other machine.
    Selecting the media folder in preferences does not get iTunes to recognize the media.  All it does is tell iTunes to start storing new media in that location.
    Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
    You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • Quick question re select-options

    Hi
    I am relatively new to ABAP but have a quick question:
    I need to create a select-options which does the following:
    1. Allows ONLY "equals" signs
    2. Disallows intervals
    3. Disallows the use of ranges in the multiple selection box.
    4. Allows multiple individual selections.
    I can achieve most using the following:
    select-options s_knvh for knvh-kunnr no intervals.
    However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
    Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
    Any ideas?
    Thanks
    Jon

    Use this FM.
    SELECT_OPTIONS_RESTRICT

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
    Nathan

    Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
    However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
    Only experimentation will answer that one.

  • 2 Quick Question

    Hello - I'm pretty new to Motion and have 2 quick questions:
    1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the keyframes in between so that it keeps the same timing and everything... it just makes the whole sequence take longer?
    2) On the same timeline with a bunch of keyframes, can you apply one long Interpolation (ala "Ease Out") to the entire thing from A-Z so that the whole sequence eases out rather than just keyframe to keyframe?
    Thanks!!
    Jason

    Heya,
    1. If you're asking if you have something like the "roving" keyframes in AE...well, kinda. Keyframes on footage, shapes, generators, particles, replicators—objects that create an image—don't seem to scale. But keyframes on secondary objects like behaviors and filters do scale.
    2. Very easy: go into the Keyframe Editor and click on the animation state icon/menu for the parameter you want to change. The icon/menu is the last column after the parameter's value in the left-hand side of the Keyframe Editor. If you pick an interpolation type in that menu, it applies it to all keyframes in that particular curve. It's also the same place where you can set the before/after extrapolation, like ping-pong, progressive, etc.

  • Quick Question: When to use ( ) and when to use [ ] and why the ( *)

    Hi all,
    A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
    I get that you use the [ ] brackets when you want something specific from an object, i.e.
    [ textField textColor ]
    and that you use ( ) brackets for things like:
    if ( x == y) {
    But I get confused when I see things like:
    NSLog(@"some text here");
    Why does that get ( ) brackets and why is it not [ ].
    Also another point of confusion, creating methods... Why are some methods done like:
    - (void)awakeFromNib
    And others done like (with the additional "*" added):
    - (NSString *)stringvalue
    As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
    Thanks in advance!

    Adam:
    As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
    \[myObject doSomething\];
    The other use square for brackets have is to index C-style arrays, such as:
    aValue = anArray\[10\]; // Get the 10-element of an array
    However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
    Parenthesis in expressions are used to group and prioritize, such as:
    x = 10 * (3 + 5); // x = 80
    If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
    The other important use of parenthesis is in calling a C function:
    result = foo(3);
    means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
    And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
    \- \(void\)returnNothing;
    \- (int)returnInteger;
    Other methods return pointers to types, like:
    \- (int \*)returnPointerToInteger;
    \- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
    Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
    \- (NSString *)makeAString;
    The method above returns a pointer to an NSString rather than the entire object.
    Good luck with your learning,
    Juan-Pablo
    Message was edited by: Juan Pablo Claude

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

  • Quick Question - Setting up Personal Domain with godaddy

    Hi there
    Just a quick question to make sure I've done this correctly?
    Ok, I've published my iWeb website.
    I've purchased a personal domain with godaddy.
    I've set up the personal domain in my mobile me account.
    I then logged into my godaddy account and went to 'Total DNS Control and MX Records'
    I changed the following under CNAME (Aliases)
    www web.me.com 1 Hour
    and then added a new CNAME Record
    www.*******.com web.me.com 1 Hour
    Have I done this all correctly?
    Will it take a few hours to take effect?
    Anything else I need to consider?
    Thanks for reading.
    Ross

    CNAME settings can take up to 24 hours to take effect.
    As long as you have forwarded your domain name to web.me.com, then it should be okay.

Maybe you are looking for