ZFS help - disk id has changed

Hi. I'm running Solaris 10 on x86 platform.
I had 3 disks on my computer, 1 IDE (with solaris 10) and 2 SATA.
Both SATA drives are (were) using zfs, though in two different pools.
One of the drives crashed and I had to remove it, but I forgot to remove it from the pool.
Naturally, things started cooking after reboot but the system booted. I managed to remove the broken drive from the pool by removing whole pool (I no longer need it).
But after removing the broken drive from the computer, the hardware ID (c0d0, c1,0, c2do etc) for
the remaining SATA drive changed. Before removal, this sata drive was c1d0s0, after removal it became c2d0s0 (I think s0 or p0). I don't know why the enumeration changed.
The question is, is there a way to tell zfs to change the drive in the zpool from c1d0 to c2d0 without erasing its (the remaining drive) contents?
Kind Regards,
Yaerek

Problem resolved. Had to reset the memory buffer inside 1 TB drive; without reset MoBo was recognizing it as a 33 MB drive

Similar Messages

  • Message "Backup disk identification has changed since the last copy"

    Hello!
    I have MD033 Time Capsule and my iMac 2012 and MacBook Pro connected to it. Time Machine is set to backup @ this disk.
    Every once in a while I get the message you see in attach on my machines. Approximately it means "Your backup disk identificator has changed since the last backup (Possible reason the disk was changed or erased since the last backup or someone is trying to make you make aт illegal backup not on your disk "
    I get this message from time to time both on iMac and MacBook but not simulateoneously. Once in a week or a month.
    I already reinstalled anew systems on my machines and even replaced time capsule itself to the same model (absolutely new, factory sealed), not even mentioning formatting its disk a dozen times and resetting TC.
    Does someone have same problem? Russian support couldn't help and directs me to a repair. But I really doubt that BOTH MacBook Pro and iMac have EXACTLY the same problem with TC. Everything seems as it is a software problem with some of the program

    frood42frood42 wrote:
    today, my MacBook shows a Message "The identity of the backup disk has changed since the previous backup."
    Welcome to Apple's discussion groups.
    It may not show anything useful, but try this: Disconnect all external and network volumes. In the Finder invoke the menu option Go > Go to Folder. In the resulting field type "/Volumes" (without the quotes) and click "Go". In the resulting window you should only see entries for any internal volumes. If you see anything else, particularly an item with the same name as your Time Machine volume, you may have the problem described in this article:
    http://db.tidbits.com/article/9620
    You should trash any such things. The way to prevent this in the future is to prevent any process from running that would write to external volumes that aren't mounted. For Time Machine, turn it off, then when you want to back up, mount the Time Machine volume and choose "Back Up Now" from the Time Machine menu item.

  • Acrobat 9.5 - I'm getting a 148:3 error.  Everything worked fine yesterday, nothing has changed Win7

    Today I tried to use Acrobat 9.5 and I am receiving this message:  "Licensing for this product has stopped working."
    "You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product of contacting your IT administrator or Adobe customer support for help".
    Nothing has changed since I used this product yesterday.  I've never had a problem with this product until now. 
    How can I download a new copy using the same license and without paying for a new copy.  Why did this happen?

    Hey thomcolby,
    You might need to refer the KB file and try troubleshooting this licensing error on your system:
    Error "Licensing has stopped working" | Windows
    Regards,
    Anubha

  • PSE 11 (OS X): Help! Catalog has just decided my photos are on a different disk

    I've been running PSE on my Mac for several years without problems. I just downloaded about 3,000 new photos from my camera, apparently without problems, but when I clicked on one of the thumbnails, PSE couldn't find the photo. On further investigation, I realized that while the photos had downloaded to the usual place, ~/photos/download, the catalog was now looking for them in the same directory but on my BACKUP disk (I have a second hard drive that I use to keep a copy of my main disk). I have no idea how this has changed or why, as I've never manually moved anything to the new disk, and have no idea how I'd tell PSE to look on a different disk anyway, but it seems to have decided to keep the same directory structure but now to look for everything on a different disk. How can I correct this? I can get PSE to find my newly uploaded photos if I copy them to the backup disk, but this is not what I want - it's supposed to be a backup disk!
    Thanks for any suggestions, both about what might have gone wrong and (especially) about how to correct it.
    Best,
    Richard Stanton

    Hi,
    Can you please check Edit > Preferences > Camera/Card reader pref > "Save Files In" preference?
    Also, for the current situation, you may reconnect the files using File > Reconnect > All Missing Files. You would need to manually locate path ~/photos/download and click Reconnect.
    Hope this helps.
    Thanks
    Andaleeb

  • Please help me, I gave my information out to a person and he has changed all my information and now I can't get in.. I know the persons name

    Please help me, I gave my information out to a person and he has changed all my information and I can't log back in.
    Adrian Lee is the person I gave it to.
    He told me to email him my information so he can level me up in the game Clash of Clans so I did and he changed all my information and I told him to give it back via email and he refused but suggested to restore my iPod and it would go back to normal and I dis, I nearly lost everything since I haven't backed it up for a while and I'm a Music Producer, this password is my paycheck, my food, my rent, my everything, now I'm not sure if this is the right place to go to but please help me. i'm begging you to please restore my password.. I'm not asking for anything of what I lost back, just my password so I can change it, get my things back and move on with my life. I have really back anxiety attacks. Please. I'm begging you. You guys are my last chance..
    <Emails Edited By Host>

    If you can't contact the person and get the information back then:
    - Contact the police for help
    - Restore from backup.
    If you can't get it from the person or from a backup then it is lost.
    In the future be carrful about who you give your login information to.

  • Ask your question.please help itunes will not launch on my computer the icon on desktop has changed to a white folder no error message appears and it appears but then disappears in task manager when the programme will not open quick time is working

    please help i need to fix my itunes it will not launch on my computer . no error message appears it simply will not run. the icon on desktop has changed to a white folder and it still appears in programmes in start menu but will not open. it appears in task manager but disappears when the programme will not open

    You music etc should not be affected by problems with the iTunes program, nevertheless it is always a good idea to backup your data.
    You haven't said if there was any error message when you tried to start iTunes. If  there was one please give it in full.
    Also check to see if QuickTime works, iTunes can not work without it. If QuickTime doesn't work, it has to be fixed before worrying about iTunes.
    Then restart your PC and open your Task manger and select the Processes tab.
    Try to start iTunes, does iTunes.exe appear on the processes tab? If so does it disappear again or remain although the programs does not open?

  • I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    Hi there,
    I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

  • My WiFi name and password has changed. Did someone hack my WiFi? My computer can connect but not my iPhone 5s, and the connection for my computer is full, please help.

    Hello, this is my first post.
    Well lately I've been experiencing some connection issues with my iPhone 5s. I was on my iPhone just watching Youtube when my iPhone 5s disconnected, I tried to connect again by going to settings> Wi-FI> and then select my network as usual, but the weird thing is that my Wi-Fi network has changed it's name to Wireless, it used to be Wireless710. Also the password has been changed.
    My computer can easily connect due to the fact that it is hardwired to the Wireless Cable Modem Gateway.
    Extra Info:
    Carrier is Sprint.
    I am using Windows 7 Ultimate.
    My Wireless Cable Modem Gateway is Netgear.
    And now I am confused because when I open the small tab with the computer and a plug on the bottom right corner next to the speaker icon it says I'm not connected :/?! Here is a picture of it:
    Note that I can not connect to it but am connected on my computer. It just disappeared on my phone and computer, I even unplugged my router waited for 20 seconds and connected it back in. Did it wok? for my computer yes again because it is hardwired, but my phone? No. Wireless 710 still won't show up. Is this a possible hack? Please help me as much as you all can, thank you very much.

    Log in to the router's console with a web browser from your computer. What kind of encryption did you have on the router? If it was WEP that's about as secure as no encryption. It should be WPA or WPA2. There has been an exploit reported in Netgear and Linksys routers that allows someone connected to the router if Remote Access to the console is enabled to take it over and install spyware on it.
    Is it your router, or the cable providers? If it is yours it has been hacked. If it belongs to the cable provider they may have changed it to make it more secure. Call them.
    And if it has been hacked and is yours the best thing to do is to throw it away and get a new, more secure router. Or you can try reflashing the firmware by going to Netgear's site and downloading a clean copy.

  • Download helper add-on no longer works after update of firefox, what has changed?

    After I updated Firefox to 18.0.02 the download helper stopped working on 98% of the websites I watch TV programs on. What has changed and will it be returned to its previous condition?
    The website I go to is: http://www.free-tv-video-online.me/internet/

    Are you using an add-on as a download helper?

  • After installing CC, The font on some websites has changed in my browser Google Chrome. Help!

    After installing CC, The font on some websites has changed in my browser Google Chrome. Help!
    take for example facebook & ebay, the fonts have changed to a distorted block type font, very un-readable, Only after I installed adobe CC, this took place...
    I am using google chrome
    Can any one help me?
    I have tried to fix it by tinkering with some settings in google chrome but had no luck!
    here is a screenshot of the problem:

    Unless a web page uses a “web font” that it supplies itself, web pages typically provide a list of fonts, in priority order, of fonts to be used to render text. Typically, this list of fonts represents “system fonts” of MacOS, Windows, iOS, and Android - fonts that can be counted on being installed. Helvetica Neue is a MacOS system font that is not typically found on Windows systems. And even if a user licenses recent versions of Helvetica Neue OpenType fonts and installs same on Windows systems, they are in the “Helvetica Neue Std” family which would not match “Helvetica Neue” which is native to MacOS. Thus, I suspect that the Helvetica Neue you have installed on Windows is an older font offering.
    There are three issues here:
    The first is that web pages provide a priority list for font usage. I suspect that the web pages you are seeing Helvetica Neue actually used on your system are requesting fonts in the order of Helvetica Neue and then Arial. The typical MacOS system would display the content with Helvetica Neue and the typical Windows system would display the content with Arial. Since you have Helvetica Neue on your system, you are getting rendering similar to what a MacOS system would have.
    The second issue is that there is no way to force a web page to reverse the order of priority of the fonts it lists.
    And finally, the third issue is that there is no way to hide a font selectively by application.
    The only way you can avoid Helvetica Neue being used on web pages preferring Helvetica Neue to let's say Arial or any other font on its list for particular text rendering is to uninstall Helvetica Neue.
    That having been said, other than perhaps personal type design preferences, are there any other issues with regards to use of Helvetica Neue for display of these web pages?
            - Dov

  • Disk Utility: Does it work or not? What has changed?

    Hello:
    After upgrading just about five hours ago to Leopard, and applying all upgrades and updates as well as security updates, I have noticed that Disk Utility is not th same snappy piece of software it used to be.
    In Tiger, I used to run Disk Utility every time there was an upgrade or update and it took usually from less than a minute to sometimes a couple minutes. This time I get the bar immediately stating a 'less than a minute' operation but it results in something about 10 or more minutes.
    It would be great if anyone from Apple or even someone with Technical information would post why is this, and what has changed with Disk Utility and how can we make sure that new permissions are fixed when the new Disk Utility can't do so. Like in my case I receive the following after the long wait.
    +Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.+
    +Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.+
    +ACL found but not expected on "Applications".+
    +ACL found but not expected on "Library".+

    On my Mac it normally runs fine and fast. The SUID errors your getting are harmless. See this.
    Apple OS X 10.5: Disk Utility's Repair Disk Permissions reports a permissions issue with ARDAgent
    If they bother you run the Mac OS X 10.5.1 Update again. It got rid of all mine when I did this.

  • Color issue with pdf from Indesign. I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

    I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

    Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
    Thanks again.
    Patrick

  • I just downloaded ios5 to my iPhone 3gs but nothing has changed ... i don't have a notification centre or anything ! help please !! :(

    I just downloaded ios5 to my iPhone 3gs but nothing has changed i have no notification center or anything help!

    Hi,
    Just updated Mac with Lion Recovery and Mac OSX update, then updated my iPhone 3Gs with V5 software. Here is a screen shot of my notification center.
    Have to say all went extremely smoothly along with a few cups of coffee, only thing that happened was after I hooked up to iCloud I needed to get an iPhoto update in order to get photo stream working, which I did and all is fine.
    Once again a big thank you to Apple and all the hard working tech people.
    Not sure what has happend but are you sure that the upgrade took? Just check your software version in settings > general > about.

  • My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

  • After upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great.

    after upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great. Other user on our exchange server that have iOS 7 or lower do not have this problem. All iOS 8 users in our company have this problem

    have you deleted the account and re-added it?  Have you done a reset or restore as outlined in the iPhone user guide?  What troubleshooting have you done?

Maybe you are looking for