ZFS Subscriber Error -1 and Fail to authenticate

We are running ZFS 7.01, using TED to distribute apps. Runing into randomly having subscribers not completely accept distributions or updates to distributions, erroring out with "Fail to authenticate. Will retry more times" & "Unknown meaning for error number -1; Please call a Novell support provider".
Exiting and restarting the ZFS.ncf (subscriber) fixes the issue for a while. We like TED, but the subscribers consistency is an issue. Help.
Paul

Rolf--Please keep me in the loop on this...Our system (TED) is unreliable at this point because on the need for manual reset. Let me know if it works out for you. Or if you hear from Novell about a patch.
Much Thanks--Paul
>>> Rolf Lidvall<[email protected]> 10/22/2007 10:08 AM >>>
We also have that issue so I called our "Novell
support provider" like the message says and it
turned out to be a well known issue with Java.
We got a couple of FTF-files for testing and so
far so good, they seem to cure the issue at least
in our environment. I have asked Novell if and when
they will release these files in a patch, and if it will
be in a NetWare, Java or TED patch. No answer yet.
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Similar Messages

  • ZFS Error -1 and Fail to authenticate

    It seems every distribution that I create the new distribution is sent and received successfully but has an error extracting the distro. On the zfs console I receive an error -1 unknown meaning and in my ted log I receive a fail to authenticate.
    A zfs start/restart fixes the problem. Ideas?

    Bryant Blaser,
    >Any references I can read up on regarding the Universal Passwords and Zen?
    When you say "failed to authenticate" that usually means that the service
    was not able to authenticate to the eDirectory object. The install usually
    sets a pre-defined or random password to the ted objects. There was a
    certain version of UP that would try to set a UP password on non-user
    objects. This caused a lot of problems.
    One of these might apply
    http://www.novell.com/support/search...200%2032366636
    http://www.novell.com/support/search...200%2032366636
    http://www.novell.com/support/search...200%2032366636
    http://www.novell.com/support/search...200%2032366636
    Jared Jennings - Data Technique, Inc.
    Novell Support Forums Sysop
    My Blog and Wiki with Tips, Tricks, and Tutorials
    http://jaredjennings.org

  • Not able to start Managed server using nohup command and failed to authenticate weblogic user

    Hi,
    I stopped weblogic Admin server, managed server and opmnctl. and restarted Admin server successfully but I'm able to start managed start without nohup command. if I use nohup command then it's not able to get authenticate and faild to start managed server. I created boot.property file with weblogic user name and password still not working. is there anyother way to suppy login credentials for managed server?
    how can I supply login credentials in below command?
    nohup ./startManagedWebLogic.sh bi_server1 t3://machine:7001 > bis1_startup.log &
    Appreciate you for your help
    Thanks
    Jay.

    /app/obiee_11g/Oracle_BI1/jdk/bin/java -server -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics -Dweblogic.Name=bi_server1 -Djava.security.policy=/app/obiee_11g/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/app/obiee_11g/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/app/obiee_11g/wlserver_10.3 -Dwls.home=/app/obiee_11g/wlserver_10.3/server -Dweblogic.home=/app/obiee_11g/wlserver_10.3/server -Dcommon.components.home=/app/obiee_11g/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/app/obiee_11g/user_projects/domains/bifoundation_domain -Djrockit.optfile=/app/obiee_11g/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/servers/bi_server1 -Doracle.domain.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/carml -Digf.arisidstack.home=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/app/obiee_11g/oracle_common/modules/oracle.ossoiap_11.1.1,/app/obiee_11g/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=/app/obiee_11g/Oracle_BI1 -DHYPERION_HOME=/app/obiee_11g/Oracle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=/app/obiee_11g/Oracle_BI1 -DEPM_REG_PROPERTIES_PATH=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/fmwconfig -Depm.useApplicationContextId=false -Doracle.biee.search.bisearchproperties=/app/obiee_11g/Oracle_BI1/bifoundation/jee/BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enableJSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.services.BISearchServiceConfiguration -Dxdo.server.config.dir=/app/obiee_11g/user_projects/domains/bifoundation_domain/config/bipublisher -DXDO_FONT_DIR=/app/obiee_11g/Oracle_BI1/common/fonts -Drtd.instanceName=RTD_bi_server1 -Dem.oracle.home=/app/obiee_11g/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=01scqabi01.natusmed.natus.com:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/app/obiee_11g/patch_wls1035/profiles/default/sysext_manifest_classpath weblogic.Server
    <Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Nov 17, 2013 12:24:00 AM PST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Nov 17, 2013 12:24:01 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
    <Nov 17, 2013 12:24:07 AM PST> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
    Enter password to boot WebLogic server:
    <Nov 17, 2013 12:24:07 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
    <Nov 17, 2013 12:24:09 AM PST> <Error> <Configuration Management> <BEA-150021> <The admin server failed to authenticate the identity of the user starting the managed server. The reason for the error is .>
    <Nov 17, 2013 12:24:09 AM PST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://01scqabi01.natusmed.natus.com:7001.>
    <Nov 17, 2013 12:24:09 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Nov 17, 2013 12:24:09 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Nov 17, 2013 12:24:09 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Nov 17, 2013 12:24:09 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /app/obiee_11g/user_projects/domains/bifoundation_domain/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
    <Nov 17, 2013 12:24:19 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Nov 17, 2013 12:24:20 AM PST> <Critical> <Security> <BEA-090403> <Authentication for user denied>
    <Nov 17, 2013 12:24:20 AM PST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
    weblogic.security.SecurityInitializationException: Authentication for user denied
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Truncated. see log file for complete stacktrace
    >
    <Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Nov 17, 2013 12:24:20 AM PST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Nov 17, 2013 12:24:20 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

  • Random I/O errors (hdd) and failing to boot, Windows not affected

    I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
    Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
    Partition layout:
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs System Reserved D8B40750B4073094
    ├─sda2 ntfs 00EA107FEA107360
    └─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
    sr0
    All three are primary partitions. Using ext4 yields the exact same result.
    The problem is easy to reproduce:
    Install Windows 7 to first half of HDD and Arch on the second half
    At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
    Windows seems to work just fine
    Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
    [ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000022f000000 aka 8944M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x9FB7C000 000040
    [ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1668MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
    [ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
    [ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
    [ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
    [ 0.000000] On node 0 totalpages: 649053
    [ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3337 pages used for memmap
    [ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
    [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
    [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 5234680 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1630000 - 0xc16be000 ( 568 kB)
    .data : 0xc146853a - 0xc162ec80 (1817 kB)
    .text : 0xc1000000 - 0xc146853a (4513 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1896.408 MHz processor
    [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
    [ 0.000032] pid_max: default: 32768 minimum: 301
    [ 0.000037] ACPI: Core revision 20140424
    [ 0.009582] ACPI: All ACPI Tables successfully acquired
    [ 0.015209] Security Framework initialized
    [ 0.015217] Yama: becoming mindful.
    [ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015472] Initializing cgroup subsys memory
    [ 0.015491] Initializing cgroup subsys devices
    [ 0.015498] Initializing cgroup subsys freezer
    [ 0.015502] Initializing cgroup subsys net_cls
    [ 0.015507] Initializing cgroup subsys blkio
    [ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.015531] CPU: Physical Processor ID: 0
    [ 0.015532] CPU: Processor Core ID: 0
    [ 0.015536] mce: CPU supports 7 MCE banks
    [ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    [ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
    [ 0.016347] ftrace: allocating 19356 entries in 38 pages
    [ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
    [ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
    [ 0.162668] ... version: 0
    [ 0.162670] ... bit width: 48
    [ 0.162671] ... generic registers: 6
    [ 0.162672] ... value mask: 0000ffffffffffff
    [ 0.162674] ... max period: 00007fffffffffff
    [ 0.162675] ... fixed-purpose events: 0
    [ 0.162676] ... event mask: 000000000000003f
    [ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
    [ 0.186179] x86: Booting SMP configuration:
    [ 0.186182] .... node #0, CPUs: #1
    [ 0.218942] Initializing CPU#1
    [ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
    [ 0.226179] #2
    [ 0.258736] Initializing CPU#2
    [ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
    [ 0.266180] #3
    [ 0.276300] Initializing CPU#3
    [ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.279379] x86: Booted up 1 node, 4 CPUs
    [ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
    [ 0.280484] devtmpfs: initialized
    [ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
    [ 0.281973] pinctrl core: initialized pinctrl subsystem
    [ 0.282053] RTC time: 22:28:26, date: 09/21/14
    [ 0.282107] NET: Registered protocol family 16
    [ 0.282225] cpuidle: using governor ladder
    [ 0.282228] cpuidle: using governor menu
    [ 0.282436] ACPI: bus type PCI registered
    [ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.282558] PCI: Using MMCONFIG for extended config space
    [ 0.282559] PCI: Using configuration type 1 for base access
    [ 0.293370] ACPI: Added _OSI(Module Device)
    [ 0.293374] ACPI: Added _OSI(Processor Device)
    [ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.323484] ACPI: Interpreter enabled
    [ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.323519] ACPI: (supports S0 S3 S4 S5)
    [ 0.323522] ACPI: Using IOAPIC for interrupt routing
    [ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
    [ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
    [ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.335971] PCI host bridge to bus 0000:00
    [ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
    [ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
    [ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
    [ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
    [ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
    [ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
    [ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
    [ 0.336266] pci 0000:00:01.0: supports D1 D2
    [ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
    [ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
    [ 0.336417] pci 0000:00:01.1: supports D1 D2
    [ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
    [ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
    [ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
    [ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
    [ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
    [ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
    [ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
    [ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
    [ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
    [ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
    [ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
    [ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
    [ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
    [ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
    [ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
    [ 0.340177] pci 0000:00:12.2: supports D1 D2
    [ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
    [ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
    [ 0.343004] pci 0000:00:13.2: supports D1 D2
    [ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
    [ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
    [ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
    [ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
    [ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
    [ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
    [ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
    [ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
    [ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
    [ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.344446] pci 0000:01:00.0: supports D1 D2
    [ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
    [ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
    [ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
    [ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
    [ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
    [ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
    [ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.356487] pci 0000:03:00.0: supports D1 D2
    [ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
    [ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
    [ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [ 0.363129] pci_bus 0000:00: on NUMA node 0
    [ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
    [ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.367456] vgaarb: loaded
    [ 0.367458] vgaarb: bridge control possible 0000:00:01.0
    [ 0.367505] PCI: Using ACPI for IRQ routing
    [ 0.369255] PCI: pci_cache_line_size set to 64 bytes
    [ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
    [ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
    [ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
    [ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
    [ 0.369516] NetLabel: Initializing
    [ 0.369518] NetLabel: domain hash size = 128
    [ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.369532] NetLabel: unlabeled traffic allowed by default
    [ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.371730] Switched to clocksource hpet
    [ 0.378213] pnp: PnP ACPI init
    [ 0.378231] ACPI: bus type PNP registered
    [ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
    [ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
    [ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
    [ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.378841] system 00:04: [io 0x04d6] has been reserved
    [ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
    [ 0.378846] system 00:04: [io 0x077a] has been reserved
    [ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
    [ 0.378850] system 00:04: [io 0x0c14] has been reserved
    [ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
    [ 0.378855] system 00:04: [io 0x0c6c] has been reserved
    [ 0.378857] system 00:04: [io 0x0c6f] has been reserved
    [ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
    [ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
    [ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
    [ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.382206] pnp: PnP ACPI: found 6 devices
    [ 0.382211] ACPI: bus type PNP unregistered
    [ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
    [ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
    [ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
    [ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420484] NET: Registered protocol family 2
    [ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.420733] TCP: reno registered
    [ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420798] NET: Registered protocol family 1
    [ 0.420831] pci 0000:00:01.0: Boot video device
    [ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 1.038759] PCI: CLS 64 bytes, default 64
    [ 1.038818] Unpacking initramfs...
    [ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
    [ 1.112753] Simple Boot Flag at 0x44 set to 0x1
    [ 1.113077] perf: AMD NB counters detected
    [ 1.113122] LVT offset 0 assigned for vector 0x400
    [ 1.113138] perf: AMD IBS detected (0x000000ff)
    [ 1.113149] apm: BIOS not found.
    [ 1.113200] Scanning for low memory corruption every 60 seconds
    [ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.116388] zbud: loaded
    [ 1.116669] VFS: Disk quotas dquot_6.5.2
    [ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.116962] msgmni has been set to 1707
    [ 1.117034] Key type big_key registered
    [ 1.117325] bounce: pool size: 64 pages
    [ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.117448] io scheduler noop registered
    [ 1.117452] io scheduler deadline registered
    [ 1.117524] io scheduler cfq registered (default)
    [ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.118114] GHES: HEST is not enabled!
    [ 1.118129] isapnp: Scanning for PnP cards...
    [ 1.513691] isapnp: No Plug & Play device found
    [ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.514746] rtc_cmos 00:01: RTC can wake from S4
    [ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.515246] TCP: cubic registered
    [ 1.515386] NET: Registered protocol family 10
    [ 1.515657] NET: Registered protocol family 17
    [ 1.516096] Using IPI No-Shortcut mode
    [ 1.516269] registered taskstats version 1
    [ 1.516866] Magic number: 14:856:502
    [ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
    [ 1.517032] PM: Hibernation image not present or could not be loaded.
    [ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
    [ 1.517350] Write protecting the kernel text: 4516k
    [ 1.517388] Write protecting the kernel read-only data: 1332k
    [ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [ 1.529660] systemd-udevd[57]: starting version 216
    [ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
    [ 1.568048] ACPI: bus type USB registered
    [ 1.568103] usbcore: registered new interface driver usbfs
    [ 1.568141] usbcore: registered new interface driver hub
    [ 1.568537] SCSI subsystem initialized
    [ 1.574578] usbcore: registered new device driver usb
    [ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.594746] ehci-pci: EHCI PCI platform driver
    [ 1.594935] QUIRK: Enable AMD PLL fix
    [ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.595002] ehci-pci 0000:00:12.2: debug port 1
    [ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
    [ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.595830] ohci-pci: OHCI PCI platform driver
    [ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.602284] libata version 3.00 loaded.
    [ 1.602306] hub 1-0:1.0: USB hub found
    [ 1.602325] hub 1-0:1.0: 5 ports detected
    [ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.602912] ehci-pci 0000:00:13.2: debug port 1
    [ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
    [ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.612308] hub 2-0:1.0: USB hub found
    [ 1.612317] hub 2-0:1.0: 5 ports detected
    [ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
    [ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
    [ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    [ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    [ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
    [ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
    [ 1.613374] hub 3-0:1.0: USB hub found
    [ 1.613388] hub 3-0:1.0: 2 ports detected
    [ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    [ 1.616754] hub 4-0:1.0: USB hub found
    [ 1.616768] hub 4-0:1.0: 2 ports detected
    [ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
    [ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
    [ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.673072] hub 5-0:1.0: USB hub found
    [ 1.673098] hub 5-0:1.0: 5 ports detected
    [ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
    [ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
    [ 1.729803] hub 6-0:1.0: USB hub found
    [ 1.729831] hub 6-0:1.0: 5 ports detected
    [ 1.730166] ahci 0000:00:11.0: version 3.0
    [ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
    [ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.731131] scsi0 : ahci
    [ 1.731321] scsi1 : ahci
    [ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
    [ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
    [ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
    [ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
    [ 2.218438] ata2.00: configured for UDMA/133
    [ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
    [ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.318651] ata1.00: configured for UDMA/133
    [ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
    [ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
    [ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.338885] sda: sda1 sda2 sda3
    [ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
    [ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 2.438989] ata1.00: irq_stat 0x40000008
    [ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
    [ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 2.439127] ata1.00: status: { DRDY ERR }
    [ 2.439166] ata1.00: error: { ICRC ABRT }
    [ 2.439207] ata1: hard resetting link
    [ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586950] usbcore: registered new interface driver usbhid
    [ 2.586953] usbhid: USB HID core driver
    [ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
    [ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
    [ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
    [ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
    [ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
    [ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
    [ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.039928] ata1.00: configured for UDMA/133
    [ 3.039955] ata1: EH complete
    [ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
    [ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
    [ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
    [ 3.089128] ata1.00: irq_stat 0x40000008
    [ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
    res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.089265] ata1.00: status: { DRDY ERR }
    [ 3.089304] ata1.00: error: { ICRC ABRT }
    [ 3.089346] ata1: hard resetting link
    [ 3.115583] Switched to clocksource tsc
    [ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.694602] ata1.00: configured for UDMA/133
    [ 3.694621] ata1: EH complete
    [ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
    [ 3.809168] ata1.00: irq_stat 0x40000008
    [ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
    res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.809305] ata1.00: status: { DRDY ERR }
    [ 3.809343] ata1.00: error: { ICRC ABRT }
    [ 3.809385] ata1: hard resetting link
    [ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4.404835] ata1.00: configured for UDMA/133
    [ 4.404858] ata1: EH complete
    [ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
    [ 4.453760] ata1.00: irq_stat 0x40000008
    [ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
    res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
    [ 4.453894] ata1.00: status: { DRDY ERR }
    [ 4.453932] ata1.00: error: { UNC }
    [ 4.637639] ata1.00: configured for UDMA/133
    [ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
    [ 4.637691] sd 0:0:0:0: [sda]
    [ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
    [ 4.637695] sd 0:0:0:0: [sda]
    [ 4.637697] Sense Key : 0x3 [current] [descriptor]
    [ 4.637700] Descriptor sense data with sense descriptors (in hex):
    [ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 4.637710] 00 00 09 b8
    [ 4.637714] sd 0:0:0:0: [sda]
    [ 4.637716] ASC=0x11 ASCQ=0x4
    [ 4.637718] sd 0:0:0:0: [sda] CDB:
    [ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
    [ 4.637727] end_request: I/O error, dev sda, sector 2488
    [ 4.637786] Buffer I/O error on device sda1, logical block 55
    [ 4.637826] Buffer I/O error on device sda1, logical block 56
    [ 4.637866] Buffer I/O error on device sda1, logical block 57
    [ 4.637905] Buffer I/O error on device sda1, logical block 58
    [ 4.637945] Buffer I/O error on device sda1, logical block 59
    [ 4.637984] Buffer I/O error on device sda1, logical block 60
    [ 4.638024] Buffer I/O error on device sda1, logical block 61
    [ 4.638063] Buffer I/O error on device sda1, logical block 62
    [ 4.638105] Buffer I/O error on device sda1, logical block 63
    [ 4.638188] ata1: EH complete
    [ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
    [ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
    [ 4.879364] ata1.00: irq_stat 0x40000008
    [ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
    res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 4.879502] ata1.00: status: { DRDY ERR }
    [ 4.879540] ata1.00: error: { ICRC ABRT }
    [ 4.879583] ata1: hard resetting link
    [ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 5.469816] ata1.00: configured for UDMA/133
    [ 5.469845] ata1: EH complete
    [ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 5.582859] ata1.00: irq_stat 0x40000008
    [ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
    [ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 5.582997] ata1.00: status: { DRDY ERR }
    [ 5.583036] ata1.00: error: { ICRC ABRT }
    [ 5.583078] ata1: hard resetting link
    [ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.191135] ata1.00: configured for UDMA/133
    [ 6.191166] ata1: EH complete
    [ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
    [ 6.256073] ata1.00: irq_stat 0x40000008
    [ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.256212] ata1.00: status: { DRDY ERR }
    [ 6.256250] ata1.00: error: { ICRC ABRT }
    [ 6.256292] ata1: hard resetting link
    [ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.845773] ata1.00: configured for UDMA/133
    [ 6.845806] ata1: EH complete
    [ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
    [ 6.986223] ata1.00: irq_stat 0x40000008
    [ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
    res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.986360] ata1.00: status: { DRDY ERR }
    [ 6.986399] ata1.00: error: { ICRC ABRT }
    [ 6.986440] ata1: hard resetting link
    [ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 7.578097] ata1.00: configured for UDMA/133
    [ 7.578124] ata1: EH complete
    [ 7.587216] random: nonblocking pool is initialized
    [ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
    [ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
    [ 7.602850] ata1.00: irq_stat 0x40000008
    [ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
    [ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 7.602982] ata1.00: status: { DRDY ERR }
    [ 7.603020] ata1.00: error: { ICRC ABRT }
    [ 7.603061] ata1: hard resetting link
    [ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.188490] ata1.00: configured for UDMA/133
    [ 8.188517] ata1: EH complete
    [ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
    [ 8.216361] ata1.00: irq_stat 0x40000008
    [ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
    res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.216500] ata1.00: status: { DRDY ERR }
    [ 8.216539] ata1.00: error: { ICRC ABRT }
    [ 8.216581] ata1: hard resetting link
    [ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.809726] ata1.00: configured for UDMA/133
    [ 8.809758] ata1: EH complete
    [ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
    [ 8.836295] ata1.00: irq_stat 0x40000008
    [ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
    res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.836429] ata1.00: status: { DRDY ERR }
    [ 8.836467] ata1.00: error: { ICRC ABRT }
    [ 8.836507] ata1: hard resetting link
    [ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 9.430994] ata1.00: configured for UDMA/133
    [ 9.431018] ata1: EH complete
    [ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 9.837542] ata1.00: irq_stat 0x40000008
    [ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
    [ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 9.837680] ata1.00: status: { DRDY ERR }
    [ 9.837719] ata1.00: error: { ICRC ABRT }
    [ 9.837761] ata1: hard resetting link
    [ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 10.515900] ata1.00: configured for UDMA/133
    [ 10.515972] sd 0:0:0:0: [sda]
    [ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
    [ 10.515978] sd 0:0:0:0: [sda]
    [ 10.515979] Sense Key : 0xb [current] [descriptor]
    [ 10.515983] Descriptor sense data with sense descriptors (in hex):
    [ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 10.515992] 5e 89 08 20
    [ 10.515997] sd 0:0:0:0: [sda]
    [ 10.515998] ASC=0x47 ASCQ=0x0
    [ 10.516001] sd 0:0:0:0: [sda] CDB:
    [ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
    [ 10.516010] end_request: I/O error, dev sda, sector 1586038816
    [ 10.516148] ata1: EH complete
    [ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
    [ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
    [ 10.529786] ata1.00: irq_stat 0x40000008
    [ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
    [ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
    res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 10.529924] ata1.00: status: { DRDY ERR }
    [ 10.529962] ata1.00: error: { ICRC ABRT }
    [ 10.530004] ata1: hard resetting link
    [ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.139673] ata1.00: configured for UDMA/100
    [ 11.139723] sd 0:0:0:0: [sda]
    [ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.139728] sd 0:0:0:0: [sda]
    [ 11.139730] Sense Key : 0xb [current] [descriptor]
    [ 11.139733] Descriptor sense data with sense descriptors (in hex):
    [ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.139743] 5e 89 08 d4
    [ 11.139747] sd 0:0:0:0: [sda]
    [ 11.139749] ASC=0x47 ASCQ=0x0
    [ 11.139751] sd 0:0:0:0: [sda] CDB:
    [ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
    [ 11.139761] end_request: I/O error, dev sda, sector 1586038992
    [ 11.139889] ata1: EH complete
    [ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
    [ 11.153169] ata1.00: irq_stat 0x40000008
    [ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.153306] ata1.00: status: { DRDY ERR }
    [ 11.153345] ata1.00: error: { ICRC ABRT }
    [ 11.153386] ata1: hard resetting link
    [ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.749884] ata1.00: configured for UDMA/100
    [ 11.749918] sd 0:0:0:0: [sda]
    [ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.749923] sd 0:0:0:0: [sda]
    [ 11.749925] Sense Key : 0xb [current] [descriptor]
    [ 11.749928] Descriptor sense data with sense descriptors (in hex):
    [ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.749938] 5e 89 08 28
    [ 11.749942] sd 0:0:0:0: [sda]
    [ 11.749944] ASC=0x47 ASCQ=0x0
    [ 11.749946] sd 0:0:0:0: [sda] CDB:
    [ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
    [ 11.749956] end_request: I/O error, dev sda, sector 1586038824
    [ 11.750093] ata1: EH complete
    [ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 11.763206] ata1.00: irq_stat 0x40000008
    [ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.763343] ata1.00: status: { DRDY ERR }
    [ 11.763382] ata1.00: error: { ICRC ABRT }
    [ 11.763424] ata1: hard resetting link
    [ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.360321] ata1.00: configured for UDMA/100
    [ 12.360370] sd 0:0:0:0: [sda]
    [ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.360375] sd 0:0:0:0: [sda]
    [ 12.360377] Sense Key : 0xb [current] [descriptor]
    [ 12.360380] Descriptor sense data with sense descriptors (in hex):
    [ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.360390] 5e 89 08 c8
    [ 12.360394] sd 0:0:0:0: [sda]
    [ 12.360395] ASC=0x47 ASCQ=0x0
    [ 12.360398] sd 0:0:0:0: [sda] CDB:
    [ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
    [ 12.360407] end_request: I/O error, dev sda, sector 1586038984
    [ 12.360543] ata1: EH complete
    [ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.370005] ata1.00: irq_stat 0x40000008
    [ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.370143] ata1.00: status: { DRDY ERR }
    [ 12.370182] ata1.00: error: { ICRC ABRT }
    [ 12.370224] ata1: hard resetting link
    [ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.959379] ata1.00: configured for UDMA/100
    [ 12.959426] sd 0:0:0:0: [sda]
    [ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.959432] sd 0:0:0:0: [sda]
    [ 12.959433] Sense Key : 0xb [current] [descriptor]
    [ 12.959437] Descriptor sense data with sense descriptors (in hex):
    [ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.959447] 63 89 08 3a
    [ 12.959462] sd 0:0:0:0: [sda]
    [ 12.959464] ASC=0x47 ASCQ=0x0
    [ 12.959466] sd 0:0:0:0: [sda] CDB:
    [ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
    [ 12.959476] end_request: I/O error, dev sda, sector 1669924920
    [ 12.959616] ata1: EH complete
    [ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
    [ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.973247] ata1.00: irq_stat 0x40000008
    [ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.973384] ata1.00: status: { DRDY ERR }
    [ 12.973423] ata1.00: error: { ICRC ABRT }
    [ 12.973464] ata1: hard resetting link
    [ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 13.569691] ata1.00: configured for UDMA/33
    [ 13.569750] sd 0:0:0:0: [sda]
    [ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
    [ 13.569755] sd 0:0:0:0: [sda]
    [ 13.569757] Sense Key : 0xb [current] [descriptor]
    [ 13.569761] Descriptor sense data with sense descriptors (in hex):
    [ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 13.569771] 5e 89 08 c0
    [ 13.569775] sd 0:0:0:0: [sda]
    [ 13.569777] ASC=0x47 ASCQ=0x0
    [ 13.569779] sd 0:0:0:0: [sda] CDB:
    [ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
    [ 13.569789] end_request: I/O error, dev sda, sector 1586038976
    [ 13.569933] ata1: EH complete
    [ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
    [ 13.583360] ata1.00: irq_stat 0x40000008
    [ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
    [ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 13.585478] ata1.00: status: { DRDY ERR }
    [ 13.585516] ata1.00: error: { ICRC ABRT }
    [ 13.585558] ata1: hard resetting link
    [ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.180020] ata1.00: configured for UDMA/33
    [ 14.180069] sd 0:0:0:0: [sda]
    [ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.180074] sd 0:0:0:0: [sda]
    [ 14.180076] Sense Key : 0xb [current] [descriptor]
    [ 14.180079] Descriptor sense data with sense descriptors (in hex):
    [ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.180089] 63 89 08 30
    [ 14.180094] sd 0:0:0:0: [sda]
    [ 14.180095] ASC=0x47 ASCQ=0x0
    [ 14.180098] sd 0:0:0:0: [sda] CDB:
    [ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
    [ 14.180108] end_request: I/O error, dev sda, sector 1669924912
    [ 14.180245] ata1: EH complete
    [ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
    [ 14.190153] ata1.00: irq_stat 0x40000008
    [ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
    res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.190290] ata1.00: status: { DRDY ERR }
    [ 14.190328] ata1.00: error: { ICRC ABRT }
    [ 14.190371] ata1: hard resetting link
    [ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.779168] ata1.00: configured for UDMA/33
    [ 14.779214] sd 0:0:0:0: [sda]
    [ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.779218] sd 0:0:0:0: [sda]
    [ 14.779220] Sense Key : 0xb [current] [descriptor]
    [ 14.779223] Descriptor sense data with sense descriptors (in hex):
    [ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.779233] 63 89 08 80
    [ 14.779237] sd 0:0:0:0: [sda]
    [ 14.779239] ASC=0x47 ASCQ=0x0
    [ 14.779241] sd 0:0:0:0: [sda] CDB:
    [ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
    [ 14.779251] end_request: I/O error, dev sda, sector 1669924976
    [ 14.779391] ata1: EH complete
    [ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
    [ 14.793513] ata1.00: irq_stat 0x40000008
    [ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.793651] ata1.00: status: { DRDY ERR }
    [ 14.793690] ata1.00: error: { ICRC ABRT }
    [ 14.793733] ata1: hard resetting link
    [ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.378218] ata1.00: configured for UDMA/33
    [ 15.378240] sd 0:0:0:0: [sda]
    [ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
    [ 15.378245] sd 0:0:0:0: [sda]
    [ 15.378247] Sense Key : 0xb [current] [descriptor]
    [ 15.378250] Descriptor sense data with sense descriptors (in hex):
    [ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 15.378260] 63 89 08 28
    [ 15.378264] sd 0:0:0:0: [sda]
    [ 15.378266] ASC=0x47 ASCQ=0x0
    [ 15.378268] sd 0:0:0:0: [sda] CDB:
    [ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
    [ 15.378277] end_request: I/O error, dev sda, sector 1669924904
    [ 15.378427] ata1: EH complete
    [ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
    [ 15.390148] ata1.00: irq_stat 0x40000008
    [ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
    res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.390285] ata1.00: status: { DRDY ERR }
    [ 15.390324] ata1.00: error: { ICRC ABRT }
    [ 15.390366] ata1: hard resetting link
    [ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.977410] ata1.00: configured for UDMA/33
    [ 15.977500] ata1: EH complete
    [ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
    [ 15.986916] ata1.00: irq_stat 0x40000008
    [ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.987054] ata1.00: status: { DRDY ERR }
    [ 15.987093] ata1.00: error: { ICRC ABRT }
    [ 15.987135] ata1: hard resetting link
    [ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.576437] ata1.00: configured for UDMA/33
    [ 16.576509] sd 0:0:0:0: [sda]
    [ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
    [ 16.576514] sd 0:0:0:0: [sda]
    [ 16.576516] Sense Key : 0xb [current] [descriptor]
    [ 16.576519] Descriptor sense data with sense descriptors (in hex):
    [ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 16.576529] 63 89 08 20
    [ 16.576533] sd 0:0:0:0: [sda]
    [ 16.576534] ASC=0x47 ASCQ=0x0
    [ 16.576537] sd 0:0:0:0: [sda] CDB:
    [ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
    [ 16.576546] end_request: I/O error, dev sda, sector 1669924896
    [ 16.576642] ata1: EH complete
    [ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
    [ 16.586847] ata1.00: irq_stat 0x40000008
    [ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
    [ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 16.586980] ata1.00: status: { DRDY ERR }
    [ 16.587018] ata1.00: error: { ICRC ABRT }
    [ 16.587058] ata1: hard resetting link
    [ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 17.175907] ata1.00: configured for UDMA/33
    [ 17.175963] sd 0:0:0:0: [sda]
    [ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
    [ 17.175968] sd 0:0:0:0: [sda]
    [ 17.175970] Sense Key : 0xb [current] [descriptor]
    [ 17.175973] Descriptor sense data with sense descriptors (in hex):
    [ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 17.175983] 5e 89 08 54
    [ 17.175987] sd

    I have only Arch installed, 64 bit, UEFI boot.
    The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
    Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
    res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
    Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
    Sep 24 06:13:59 kernel: ata6: hard resetting link
    Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:13:59 kernel: 00 00 0e 87
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
    Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
    Sep 24 06:13:59 kernel: ata6: EH complete
    Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
    Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
    res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6: hard resetting link
    Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
    Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    and so on... It somehow booted, but now journalctl says:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
    while the Error hasn't occured yet.
    I think I wil take the emergency procedure, and start backing up my files and system ...
    I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

  • Home DB error (404) and fails logs (Parameter was NULL)

    Hello, I installed the oracle-xe by apt-get like in http://www.oracle.com/technetwork/topics/linux/xe-on-kubuntu-087822.html
    I use Linux debian (mint) with KDE.
    The installation and configuration was successful. BUT when I try open Home (http://127.0.0.1:8080/apex) return error 404.
    This config was in port 8080
    tati@desa462-linux:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts > cat /etc/default/oracle-xe |grep HTTP# HTTP_PORT : HTTP port for Oracle Application Express
    HTTP_PORT=8080
    I run enviroment script like in http://docs.oracle.com/cd/B25329_01/doc/install.102/b25144/toc.htm#BABDGCHH
    ". /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh"
    no return errors and variables was defined.
    listener port
    tati@desa462-linux:~ > netstat -a | grep 1521
    tcp        0      0 *:1521                  *:*                     LISTEN    
    no-listener
    tati@desa462-linux:~ > netstat -a | grep 8080
    tati@desa462-linux:~ >
    error log:
    [  OCRUTL][4132255488]u_set_comp_error: Parameter was NULL
    [  OCRUTL][4132255488]u_set_ocr_error: Parameter was NULL
    2014-12-08 10:21:47.224: [  OCROSD][4132255488]utgdv:2:ocr loc file  cannot  be opened
    2014-12-08 10:21:47.225: [  OCROSD][4132255488]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
    [  OCRUTL][4132255488]u_set_gbl_comp_error: Parameter was NULL
    2014-12-08 10:21:47.225: [  OCRRAW][4132255488]proprinit: Could not open raw device
    2014-12-08 10:21:47.225: [ default][4132255488]a_init:7!: Backend init unsuccessful : [33]
    [  OCRUTL][4132255488]u_set_ocr_error: Parameter was NULL
    2014-12-08 10:21:47.225: [ CSSCLNT][4132255488]clsssinit: error(33 ) in OCR initialization
    Can any one help-me??

    You can have a look at other web applications in /webapps to see how correctly structured look like.
    You can also read this (very old) but still informative post.
    From what you say, it seems you have several challenges:
    * web-inf is in lower case instead of uppercase
    * the web application is named "uk" and not "demo-examples"
    Have you tried with http://localhost:1020/uk/HelloWorld ?

  • Why do I get error messages and failed sync's of wma songs?

    I'm pulling my freakin hair out.
    I have been able to transfer songs burned from cd's to my crackberry (converted in wma format) but have not been able to sync songs purchased from walmart in wma format (windows media player) or songs purchased from I-tunes in their format.  I've got a 8330 curve, the 4.2.1.5. (whatever) latest update with Roxio, a Sandisk 1 gb micro sd card.  The songs have unlimited sync rights and everything from hardware to software seems to be in order. Mass storage device is on and all the card properties are just as the instructions suggest (are they right?)
    I've tried copying and pasting from desktop and sending to the usb port and it will copy over but you get about 1.2 seconds of song and it pukes out.
     Either I'm an **bleep** or the phone and the formats are too smart for each other or are in divorce court. This really shouldn't be hard.  WTF?  Do we really have to be .edu guy to figure this crap out?
    Any help would be greatly appreciated.
    Thanks
    Jeff

    how can email site be reconfigured?

  • Failed to authenticate - Shared Services 11.1.2.1

    I've installed and configured Foundation services. When I try to login to Shared Services, I get the following error:
    EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials.
    Code: 1000
    Description: An error occurred processing the result from the server
    Version - 11.1.2.1
    Windows 2003 R2 SP2
    Can anyone help with this issue? I haven't find any solutions on the forum...
    Thanks

    John,
    Thanks for the feedback. This is a new install, so I am entering the password that I used in the EPM configurator. Here is the full log:
    <Aug 29, 2011 3:39:54 PM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Aug 29, 2011 3:39:54 PM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Aug 29, 2011 3:39:55 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.2-b06 from Sun Microsystems Inc.>
    <Aug 29, 2011 3:39:59 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Aug 29, 2011 3:40:02 PM EDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <Aug 29, 2011 3:40:02 PM EDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Aug 29, 2011 3:40:02 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Aug 29, 2011 3:40:02 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Aug 29, 2011 3:40:02 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 29, 2011 3:40:02 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log00004. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log.>
    <Aug 29, 2011 3:40:02 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
    <Aug 29, 2011 3:40:11 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Aug 29, 2011 3:40:14 PM EDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of FoundationServices0 has been migrated to backup server and the backup server is accessing the TLOG of FoundationServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
    <Aug 29, 2011 3:40:16 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 29, 2011 3:40:16 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\access.log00001. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\access.log.>
    <Aug 29, 2011 3:40:25 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Aug 29, 2011 3:40:25 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getDomainConfiguration()
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getRuntimeService()
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
    return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\registry_update.xml file
    EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
    Template for SHAREDSERVICES#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_sharedservices_11.1.2.1.jar
    Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_sharedservices_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM HSS, Oracle EPM Misc libraries, Oracle EPM BPM UI libraries, Oracle EPM BPM UI shared webapp, Oracle EPM Struts libraries]
    BPMUI shared webapp referenced from SHAREDSERVICES#11.1.2.0
    Application name: SHAREDSERVICES#11.1.2.0
    Application source: interop.ear
    Server name: FoundationServices0
    Server port: 28080
    Server SSL port: 28443
    Application context: interop
    Registry product type: SHARED_SERVICES_PRODUCT
    Registry physical web application type: SHARED_SERVICES_WEBAPP
    weblogic.Name property is 'FoundationServices0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for SHAREDSERVICES#11.1.2.0
    EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
    Physical Web App found
    Web app already linked to some application server: false
    The registry was not modifyed because it already containse all sturctures
    Web app is already linked to the logical web app
    No needs to run custom updater for SHAREDSERVICES#11.1.2.0
    loggingUpdateSHAREDSERVICES.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
    <Aug 29, 2011 3:40:54 PM EDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\tmp\servers\FoundationServices0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\oj8n6j\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getDomainConfiguration()
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getRuntimeService()
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
    return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Calling getConnection()
    return weblogic.management.jmx.mbeanserver.WLSMBeanServer@2bc9e4d2
    Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\registry_update.xml file
    EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
    Template for WORKSPACE#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_workspace_11.1.2.1.jar
    Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_workspace_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM BPM UI libraries, Oracle EPM BPM UI shared webapp, Oracle EPM Misc libraries, Oracle EPM LCM libraries, Oracle EPM Xerces libraries]
    BPMUI shared webapp referenced from WORKSPACE#11.1.2.0
    Application name: WORKSPACE#11.1.2.0
    Application source: workspace.ear
    Server name: FoundationServices0
    Server port: 28080
    Server SSL port: 28443
    Application context: workspace
    Registry product type: WORKSPACE
    Registry physical web application type: WORKSPACE_WEBAPP
    weblogic.Name property is 'FoundationServices0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for WORKSPACE#11.1.2.0
    EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
    Physical Web App found
    Web app already linked to some application server: false
    The registry was not modifyed because it already containse all sturctures
    Web app is already linked to the logical web app
    No needs to run custom updater for WORKSPACE#11.1.2.0
    loggingUpdateWORKSPACE.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
    **********Getting connection from hub connection pool..Testing JNDI connection....
    <Aug 29, 2011 3:41:25 PM EDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Aug 29, 2011 3:41:25 PM EDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of FoundationServices.>
    <Aug 29, 2011 3:41:30 PM EDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Aug 29, 2011 3:41:55 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Aug 29, 2011 3:41:55 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Aug 29, 2011 3:42:00 PM EDT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Aug 29, 2011 3:42:00 PM EDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Program Files\Java\jdk1.6.0_27\jre\lib\security\cacerts.>
    <Aug 29, 2011 3:42:01 PM EDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Thu Mar 21 15:12:27 EST 2002,
                   To: Tue Mar 22 16:12:27 EDT 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.2.177:28443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.2.177:28080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:28080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Aug 29, 2011 3:42:01 PM EDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "FoundationServices0" for domain "EPMSystem" running in Production Mode>
    <Aug 29, 2011 3:42:01 PM EDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Aug 29, 2011 3:42:05 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Aug 29, 2011 3:42:05 PM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    Thanks!
    Brent

  • Error Message 0x80040702, Failed to load dllpalmDevc?

    I just bought a new computer and went to install software from cd and am getting message error 0x80040702 and failed load dll.palmDevc
    I tried to uninstall frm control panel and I cannot uninstall. I tried to overwrite software download with internet from palm.com and it could not continue until I unintstall program which I can't seem to do. I have no back up right now please help.
    Post relates to: Palm Z22
    Message Edited by WyreNut on 03-22-2008 09:55 AM

    Hello fivelemmondrops:
    Since no one answered to our question, I did my research and finally could solve the problem. You should go to any site which offers dll files and download the palmdevc. I did it here, for free: http://www.dlllab.com/palmdevc.dll_download.html
    Then you should copy the file in your System 32 folder, and run the uninstall program again. I did it and it uninstalled successfully. I hope it works for you too.
    Post relates to: Palm TX
    Message Edited by WyreNut on 03-22-2008 09:56 AM

  • Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

    Hi there,
    I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
    instances.
    A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
    Currently both instances are running on same node.
    While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
    as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
    Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
    Please help resolve the issue.
    Thanks,
    AY

    Hello,
    I Confirm that I encountred the same problem when the first domain controller was dow !!
    During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
    When the firts DC restart finishied restarting every thing was Ok !
    The Question here : Why the cluster instance does'nt used the second DC ???
    Best Regards     
    J.K

  • DAC server start-up error and Can't authenticate user

    HI,
         we have installed DAC server in Linux machine and client on windows. By using DAC client we restored the backup of DAC repository, DAC client was working fine still restoration and after restoring it’s not logging in. It throws error like "Can't authenticate user"
    while starting DAC services in Unix server it throws an error like
    ANOMALY INFO An exception occurred. Shutting down server...
    MESSAGE:::/u01/DAC/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
    EXCEPTION CLASS::: java.lang.UnsatisfiedLinkError
    Note: since DAC client is not separately available for windows we have installed dac server also and while installing and after installing we never configured to connect to the dac server which is in Linux, we have configured only DB.
    we have successfully installed OBIEE, Informatica, and DAC version is 10.1.3.4.1.
    How to start the DAC services?
    How to configure dac client to connect to DAC server and how to solve this "Can't authenticate user" issue?
    Pls help in this regard.
    Thanks in advance.

    EddyLau wrote:
    Hi,
    I encounter the "Can't authenticate user" error in DAC first setup after installation when it prompt up to ask for setting up administrator id and password.
    here's my sql statement to create database schema for dac in oracle database.
    grant dba, connect, resource, create view, create session to SSE_ROLE;
    create user DEV_DAC identified by "password";
    grant DEV_DAC to SSE_ROLE;
    grant dba, connect, resource, create view, create session, grant any role to DEV_DAC;
    I tried dropping the data schema and create it again but still fail to authenticate.
    did I grant enough privileges to the database schema?
    Please help.
    Thanks,
    EddyLogin to DEV_DAC using the credentials from SQL Developer or sql
    Then do select * from W_ETL_USER -- here you will see 2 Administrator id's listed
    now run the command Delete From W_ETL_USER
    Now login to dac client with Administrator and pwd which you have set earlier.
    Mark as helpful or correct if it helps
    Thanks,
    RM

  • ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.

    Im trying to connect to my azure subscription via powershell on my machine but keep getting the following error when i run a command:
    ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated  with this subscription.
    The steps i have taken so far are:
    1. get settings file
    Get-AzurePublishSettingsFile
    2. Import settings file
    Import-AzurePublishSettingsFile -PublishSettingsFile "C:\Users\me\Downloads\credentials.publishsettings"
    3. I then run Get-Azuresubscription with the following output:
    SubscriptionId : 699385c3-b83a-44af-a651-bxxxxxxxxx
    SubscriptionName : Windows Azure MSDN - Visual Studio Premium
    Environment : AzureCloud
    SupportedModes : AzureServiceManagement
    DefaultAccount : 3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4
    Accounts : {3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4, 26B118D7F3C598FB8FE9CDC49AB5DE5E450C967C,
    03E1E1F0B8C7717F11FB58A14138C35524AB3F8D, 9A2E1FD267ECCC0E9B8C151BD931FC4824E89184...}
    IsDefault : True
    IsCurrent : True
    CurrentStorageAccountName :
    TenantId :
    I run Get-AzureAccount and get the following:
    Id Type Subscriptions Tenants
    3B68902B5170D5EC91BFCBE4CC27E2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    A8838F61C4
    26B118D7F3C598FB8FE9CDC49AB5DE Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    5E450C967C
    03E1E1F0B8C7717F11FB58A14138C3 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    5524AB3F8D
    9A2E1FD267ECCC0E9B8C151BD931FC Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    4824E89184
    85AD02CB8EB8AB20CF2C44FD9D19F2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
    9B6BB2FCD2
    Finally, when i try to run Get-AzureSQLDatabaseServer, to list my databases, i get this error:
    WARNING: Client Session Id: '5911f288-7b02-4c94-bb9d-37b9ea5fc187-2015-01-13 11:47:54Z'
    WARNING: Client Request Id: '3e5f7ea9-092a-46fd-a6a6-6916b9161b77-2015-01-13 15:25:41Z'
    Get-AzureSqlDatabaseServer : ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated
    with this subscription.
    At line:2 char:1
    + Get-AzureSqlDatabaseServer
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [Get-AzureSqlDatabaseServer], CloudException
    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Server.Cmdlet.GetAzureSqlDatabaseServer
    I would appreciate any help in figuring out what i am doing wrong here.
    Thanks,

    OK. That won't work in Azure Automation though, as mentioned above. OrgID (recommended) or cert-based auth will need to be used. PublishSettings file won't work.
    Correct, but the original question was:
    <Quote>
    Im trying to connect to my azure subscription
    via powershell on my machine 
    </Quote>
    I wanted to test automation script's core functionality without having to wait for the very very long time taken for an automation runbook
    to spin up, actually run and provide output (can often take 2+ minutes for a trivial script). Although i cant run Workbooks on my pc, i can run the core modules (view virtual machines, databases etc) to ensure my logic is sound.

  • TimesTen 7.0.6.9: Replication Agent fails with Error 17029 and 8191

    The replication agent failed to start with error 17029 and 8191.
    /etc/hosts look like:
    1.1.1.1 server1.tt.com server1 => `hostname` returns this
    2.2.2.2 server1-2.tt.com server1-2
    SQL statement to create a replication schema looks like:
    CREATE REPLICATION AAA.R1
    MASTER dsn1 on server1-2
    SUBSCRIBER dsn2 on server2
    STORE dsn1 on "server1-2" PORT 17013
    STORE dsn2 on "server2" PORT 17013;
    call ttRepStart();
    call ttRamPolicySet('always');
    call ttRepPolicySet('always');
    quit
    This fails with
    17029: This store (dsn1 on server1.tt.com) is not involved as a local store in replication scheme AAA.R1
    8191: This store (dsn1 on server1.tt.com) is not involved in a replication scheme
    In addition, replication files are created with dsn1 as a prefix.
    I added ttHostNameSet('server1-2'); before ttRepStart(), but it did not seem to take effect. I also tried ROUTE statement; however, the error did not disappear.
    How can I make this work?

    Yes you have to specify the hostname output in the replication DDL.
    This is what you can find in the replication Doc
    "When specifying the host for a data store in a replication element, you should always use the name returned by the hostname command, as replication uses the this same host name to verify that the current host is involved in the replication scheme. Replication schemes may not be created that do not include the current host.
    If a host contains multiple network interfaces (with different IP addresses), you should specify which interfaces are to be used by replication using the ROUTE clause. You must specify a priority for each interface. Replication tries to first connect using the address with the highest priority."

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

    i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

    What's the error mesage?

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

Maybe you are looking for