Zi6 .. a christmas present that I'm struggling with

Took a few videos of te kids this morning with my brand new zi6, but when I transfer them onto my imac and try to watch them in quicktime the picture is jumpy for both HD and HD 60fps.
Any bright ideas before I get too depressed about my new present!
Happy xmas
j

I also received a Kodak Zi6 HD camera and so far am very impressed with the results considering the price ($160).
I have no problem in playback with my Sony HD tv. However, I would also like to use my computer (S.R. MB).
The camera comes with a USB interface and my MB recognizing and downloads the movies with no problem. Quicktime basic WILL play the VGA movies, but seems hamstrung with the HD movies. The first frame does appear, but there is no playback button that I can find that will start the movie. Grabbing the slider at the bottom of the screen enables a slocky manual playback. I'm wondering IF I buy Quicktime Pro for Mac, if I can then play these movies in a normal manner.

Similar Messages

Just moved from microsoft word, struggling with one thing . . the view

I've just recently started using pages rather then microsoft word.
It seems great, but there is one thing that I'm struggling with, the page view
No Matter what I do I can't seem to show the pages left border (from the perspective of looking at the computer screen)
In word you can see the entire page, then there is space where it finished and around the sides.
I can't seem to get the view to show the space around the top of the first page and the left border of all the pages.
Any help is greatly appreciated!
Thanks in advance

What about the view - one up option? I see it in the help but I don't see it in my document. When I click on View, I don't see one up as an option.
Anyone know if there's a way to see one page above/below the other, rather than spread out side by side?
It's not in the View menu. One-up & two-up is in the percentage box at the bottom left of the document.

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

Thanks so much microsoft for shipping my sons Christmas present is such a discreet box....

A huge box with XBOX ONE written on it............Really appreciative that you told him what his main Christmas present is 3 weeks before Christmans!!! Good Job!!

Hello,
You might mention this on http://www.xbox.com/en-US
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Hi my mom recently bought me an iphone 5s in america for my christmas present. She bought only the phone with no plan attached to it because it was $500. I live in ireland and i was wondering would it work here and if not how do i get it to work ?

Hi my mom recently bought me an iphone 5s in america for my christmas present. She bought only the phone with no plan attached to it because it was $500. I live in ireland and i was wondering would it work here and if not how do i get it to work ? She doesnt know that i know about the phone so any advice would be great thanks !!

Allan Eckert wrote:
As far as I know Apple has not started selling unlocked iPhone yet in the US.
The other thing is that the warranty on iPhones is only villain in the country of purchase so it will not be serviced by Apple in Ireland.
bought me an iphone 5s

Pre-install for Christmas present.

I'm giving an imac as a christmas present and would like to pre-install some word processing and games programs onto it, but leave everything intact so that come christmas day, after the experience of the apple welcome animation and account registration, the applications are already inside ready to work and play. is pre-installing programs possible on a mac (presumably under leopard)?

In addition to DaddyPaycheck's comments, you'd have to create an admin account and password to install software. This admin account and password may not be named as the user wants. It would also obviate booting into Setup Assistant.
-mj
[email protected]

Christmas Presents - HELP!!!!!

Hello my fellow Verizon customers,
I need your help!!! My dad is getting a droid for his account and wanted to use the buy one get one free deal that Verizon has going on for the droids and give the other phone to me. I am on a separate account. Verizon wont let him get the free phone though because he doesn't have another eligible line on his account. Is there any way of getting around this?? If he goes into the store is there any way to get them to work with him on this? This was supposed to be a Christmas present.

So there is absolutely no way at all to get around this? What if he added a line for 9.99 with an old phone he has at home and then went in to buy the buy one get one free droid and added the free droid to the second line? would this work? Or are there any other ways to do this? He does not want to pay full price for the phone when they have a BOGO going on with Droids right now.

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td>

Hi Everyone, i lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...

Hi Everyone,
I lost my KN presentation that i spent a day with my boss to finish it. I lost it by mistakenly shutting down my Macbook pro. Can anyone please tell me how to recover the files back as i'm really2 in trouble and my job depends on it...
hmmm...how i hate myself for being such a careless person...
PLEASE HELP ME...
Thank you in advance.
Keynotes '09
Version 5.1.1 (1034)

How exactly did you shut down your laptop? Not a hard restart (holding down the power button), I hope... if that's the case, then it is extremely unlikely the file is still intact on your computer. If it is, it would be an image on your RAM, and it is time-and-resource-intensive to recover it if it is even there. RAM memory is disposable and always being written over. Sorry dude...
If it wasn't a hard restart, Keynote should have made a backup, unless you 'Force Close'd it.
It really all depends on how your mac was shut down.

How can I watch presentations that are devedores by the Adobe Flash Player program in the IPad?

How can I watch presentations that are devedores by the Adobe Flash Player program in the IPad?

Search any of the iPad, iPhone or iPod touch forums for "flash". You'll find a number of threads on the issue with suggestions for alternative app/service combinations that allow viewing of some Flash content.
Regards.

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly app

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.

Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal;

I have a keynote presentation that i built a while ago. How do identify the file names of the video files that are in the presentation?

I have a keynote presentation that i built a while ago. How do i now identify the file names of the video files that are in the presentation?

With your presentation open, click on each movie element and read the name in the Metrics Inspector > File Info.

[SOLVED] "No codec present that can handle the stream's type" issue

Hello. I got a python program that would play musics on a website, which doesn't work for a "no codec present that can handle the stream's type" issue. I have installed things like gstreamer, gstreamer-plugins, gstreamer-python, gstreamer-ffmpeg, and libmpeg2, etc. However, this issue still remains. Would someone here be able to help?
Here's the error message:
** Message: don't know how to handle audio/mpeg, mpegversion=(int)1, mpegaudioversion=(int)2, layer=(int)3, rate=(int)24000, channels=(int)2, parsed=(boolean)true
Error: There is no codec present that can handle the stream's type. gstplaybasebin.c(2322): prepare_output (): /GstPlayBin:player
Here's the program, written by a Chinese: https://github.com/zhendi/DoubanFM-CLI
Edit:
I'm able to play the musics on the websites via chromium.
Edit:
I tried to download the music, and use gst-launch-0.10 filesrc location=~/p535960.mp3 ! decodebin ! autovideosink, but only find these messages:
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
ERROR: from element /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstMpegAudioParse:mpegaudioparse0: GStreamer encountered a general stream error.
Additional debug info:
gstbaseparse.c(2695): gst_base_parse_loop (): /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstMpegAudioParse:mpegaudioparse0:
streaming stopped, reason not-linked
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
Last edited by lastland (2012-02-18 07:47:47)

Sorry. I just found the reason. I missed gstreamer-ugly in this case.

Zi6 .. a christmas present that I'm struggling with

Similar Messages

Maybe you are looking for