Ziio 7" Default input method

Hello again!
My second problem: Ziio always starts with google pinyin (why I have chinese keyboard as default?! - I also have japanese IME and Hanwang Handwriting IME) but I can easily change it to my favourite keyboard with Polish national letters - and question is - can I make my keyboard as default? When I restart system or something similar keyboard always changes to google pinyin.
kr
PS - is there a method to uninstall this asian keyboards (I really don't need them)?

Hi,
The ZiiO should remember the last selected keyboard. Do you have the latest firmware installed?
PS: The keyboards are part of the firmware. I am not aware of any methods to remove them.

Similar Messages

How to STOP OS X from automatically changing between language input methods

I want to know if there is a way in OS X Leopard to stop the system from automatically changing the language input method. I use English and Japanese on my computer, but this would apply to anyone using more than one input method.
For example, when I click on a Japanese-language file, the system automatically changes input to Kotoeri (the Japanese-language input method). When I then click on an English-language file it usually, but not always, changes back to English input. But I almost never want to TYPE in Japanese. I just need to be able to read Japanese and to cut and paste from Japanese language files. It is very annoying when I start typing in an English-language file and find the input method has been changed to kotoeri without me realizing it—everything comes out in meaningless Japanese. When I want to type in Japanese, I want to manually change to the Japanese input system. That is, I want English to always be the default input method even if I am manipulating Japanese-language files.
So, I’m wondering if there’s a way to set the computer so that it never AUTOMATICALLY switches between the input methods. I want to be able to switch only manually. In the old days of System 7, 8, and 9, there was a third-party control panel you could get that would do this (I think it was called Stay There!) and I don't remember this being a problem in Tiger or earlier versions of OS X. Is anyone aware of any way to do this in Leopard?
Thank you!
Colin

Well, I do have it set that way, and I can look up there to see where I am, but in the work I do time is critical and I move back and forth between the two languages frequently. It is really a pain and a waste of time to have to look and make a change that should be unnecessary. The problem is not so much that I don't know where I am. It's that I don't want to ever have to think I MIGHT be in anything but English input unless I specifically want to be. In other words, I need to be able to forget about this problem even being a possibility.
Message was edited by: Colin Talcroft

Uim won't switch input methods[SOLVED]

I'm probably just making a simple mistake but I'm having trouble with uim. I followed the instructions on the wiki about inputting Japanese with uim and I set mozc as the default input method. Yet when I use the keyboard shortcuts to try to switch.... Well that was weird. As I was typing this message I was suddenly given a list of Kanji to select. When I hit backspace it was gone and is now apparently not coming back. Well what I was going to say before that strange event was: I use the keyboard shortcuts but input doesn't change. Anyone have any ideas on what might be going on, what mistake I may have made?
EDIT: You know what? Now it's working. ほらほら！ Unfortunately it doesn't work in anything but my browser. Pidgin, Libre-Office, Skype... none of them want to work with it.
EDIT 2: And now, for no reason at all, it ONLY works in Pidgin, not in anything else! Or it did until I typed this line, then I randomly started typing in 日本語 again. Then, when I closed out the preference panel, it stopped working entirely. I've got the preferences open again and it STILL won't work.
EDIT 3: I'm just marking this as solved, I gave up and switched to ibus, it seems to work.
Last edited by Axalon (2014-05-14 23:45:20)

Exactly which troubleshooting steps have you tried?
Does the machine get stuck at that point or does it power off?
Do you have the original install discs?
~Lyssa

I defaulted input help field (pick list) but SAP CRM still asking for one

We are running SAP CRM 7.0.
Some fields as you know are dialog / pick list fields.
What I mean by this is they are input help fields where you
can click a little square (in sap crm 7.0) to the right of the text box
and it brings up a dialog screen of values that you can select from.
Here is an example screen shot of what I am talking about:
http://img834.imageshack.us/img834/5676/imageschak.png
So what I have done is implemented the GETTER function for this input help field so that by default it has a value.
The code is like so:
method GET_CURRENCY.
CALL METHOD SUPER->GET_CURRENCY
EXPORTING
    ATTRIBUTE_PATH = attribute_path
   ITERATOR       = iterator
RECEIVING
    VALUE          = value.
      if value eq ''.
        IF sy-langu EQ 'E'.
          VALUE = 'USD'.
        elseif sy-langu EQ 'D'.
          VALUE = 'EUR'.
        ENDIF.
      endif.
endmethod.
Here even is a link to this method that I created: Field Currency of Context Node BTADMINH - How to set default
The method works great it sets the default of the currency to say USD. When I click the create button to create an opportunity the field currency is set to USD, this is great because it makes my job easier that I dont have to click the input help button and select a currency, it is already there.
But once I click the "Save" button for an opportunity I get a small error in the error notification box that tells me I need to select a currency! But why is this happening a currency already exists? So If I click the input help (the little button) and reselect the currency value USD then save my opportunity this error goes away.
The question is why does this happen? I need it so that the default currency value is recognized by the SAP CRM system. Why do I have to go back in and re-select the currency if it is already set? Is there some sort of consistency check or something I need to do to eliminate this problem?
Here is a screen shot after creating an opportunity with the default Currency set to USD (this means I did not select USD in the dialog input help it was defaulted by the getter method:
http://img832.imageshack.us/img832/3011/enteracurrency.png
Only if I go back into edit mode and actually click the little square to bring up the dialog of values and select USD does this error go away. Why does this happen ?

I called SET_CURRENCY right after setting my value and the error is now gone.
SET_CURRENCY( EXPORTING ATTRIBUTE_PATH = ATTRIBUTE_PATH
                iterator = iterator
                value = value ).
Got the tip from Pieter who has a good blog on SAP CRM: http://sapcrmweblog.blogspot.com/

Bootcamp, Windows 7: EN option not showing up in input method selector

Hi,
I added a Japanese and a German input method on my Bootcamp Windows 7 install.
For some reason only JP (Japanese) and DE (German) are shown as options in the input method selector - but no EN, which should be the default...
In the settings the EN entry is shown however:
EN English (United States)
    +-+ Keyboard
        + United States (Apple)
JP Japanese
    +-+ Keyboard
        + Microsoft IME
German (Germany)
    +-+ Keyboard
        + German (Apple)
When starting up, the German keyboard is activated and there is no way to switch back to the English one.
When adding another English keyboard, US for example, an EN option is shown - but it selects the normal US keyboard and not the "United States (Apple)" one...
Any idea how to solve the problem?
Thanks, Dietrich

Hi andrum99,
Could you please explain a bit for the system compression in cleanmgr?
I only seeing the option under the drive properties for Compress this drive to save disk space, and I never heard of the new '' system compression".
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Should Arch have a common input method ?

Should Arch have a common input method ?
Arch is a really great distro,so I think there are a lots of arch users all over the world.
And I believe that more and more people will know Arch,use Arch,Love to use Arch
But I am curious about that : everyone use english only? Just input English only?
For me I need a input method to input Chinese in gedit,gnome-terminal,openoffice and so on.
I guess some users( in particular for non-English users) also need it for their own language.
So I eager hope Arch will official have common method support.
And SCIM is a good choice--Smart Common Input Method.
Old Homepage http://www.freedesktop.org/Software/scim
New homepage http://www.scim-im.org/
And http://sourceforge.net/projects/scim/
SCIM is the defaults Chinene input moethod in SUSE Mandriva(formerly mandrake),and included in Fedoa's Repo.
Tt also is the defauls input moethod for CJK(Chinese/Korea/Japanese) users,SCIM supports a large
number of input methods in a bunch of languages,and trying to enumerate all the input method
engines and their corresponding languages.
scim- scim is the core package, which provides the fundamental routines and data types
skim - An input method based on SCIM library and KDE/QT.
scim-{anthy,canna,prime,skk,wnn} - IMEngines for Japanese
scim-chewing - IMEngine for Tranditional Chinese
scim-pinyin- Currently contains a Smart Pinyin IMEngine for Simplified Chinese.
scim-fcitx - fcitx ported to scim for Chinese
scim-tables - Contains many table based input methods.
scim-uim - A wrapper to use uim as an IMEngine of SCIM.
scim-m17n - A wrapper to use m17n library as an IMEngine of SCIM.
scim-qtimm - Qt-immodule support for scim.
scim-hangul - A Hangul !IMEngine which is ported from imhangul project.
scim-input-pad - scim-input-pad is an OnScreen input pad for SCIM used to input some symbols very easily

cactus wrote:@dibble: in fact, I would. Then i would set out to make the packages myself so I could use them, or try to form a group of like minded individuals to create a language specific port.
i don't want to start a massive fight about this cactus because you know I respect your views but i wonder how a group of people that require internationalization support can collaborate on a project without a common language?
We can already see that miracle is doing his best to get his point across with varying sucess, i can't imagine trying to achieve many harder things in the internet environment, never mind establishing a project. Of course this is well within the users power but i really think that in this instance non-enlgish speaking users would greatly benefit from the support of experience Arch Users who have english as first langauge.
miracle - if the PKGs are in the AUR you need to contact other arch users, possibly on the other languages forums, and tell them to vote for the scim pkgs

Input Methods changing without permission

Hi everybody.
I use a personalized keyboard mapping. I've created it with Ukelele, put it into ~/Library/Keyboard Layouts and selected it in the System Preferences (so only my account can use this layout). Perfect.
Now, the issues:
If I use the “fast user switching” in the menu bar, my own Input Method is reverted to the default French input method. I think that is normal for this window, but if I cancel the user switching, the default French input method remains and I have to manually switch back to my personalized keyboard layout.
The same thing happens when I play “Warcraft III”: the input method is changed to the default French layout as soon as the game is launched. How can I change this behavior ?

http://parahuman.org/journal/2005/07/changing-mac-os-xs-default-keyboard.html#11 2420770366273168
This seems very interesting. Haven't tried it yet but I'm about to.
Also see here:
http://www.betalogue.com/2008/03/12/mac-os-x-105-leopard-fast-user-switching-des elects-input-method/

"Choose input method" is behind keyboard so I can't use it

I just upgraded to Kit Kat on my Galaxy S4, and I can no longer pick my preferred keyboard because the "choose input method" dialog does not close the keyboard when it opens like it used to, and so half of the dialog is hidden behind the keyboard. Normally I would hit the back button to close the keyboard, except this closes the input selector dialog instead. How do I change my active keyboard?

OK, I can change the default keyboard from the settings panel, but that means I have to go into settings every time I need to change it (and I often switch back and forth between a few of them depending on what app I'm using because some keyboards are better suited for different tasks). So the question then becomes is Verizon aware of this problem and how do I make sure they are so it gets fixed in the next update? (and how long before that update?)

Physical inventory With the help of Batch input method

Dear all;
Can anyone tell me the procedure of Physical inventory procedure with batch input method ?
kindly Give me the step .
Thanking you;
Regarsds;
Joydeep mukherjee

Hi,
Go through this following code,
selection-screen begin of block B2 with frame title TEXT-005.
selection-screen begin of line.
parameters:     P_BIRPT type C radiobutton group RAD1 default 'X' user-command UCOMM.
selection-screen comment 3(20) TEXT-002 for field P_BIRPT.
selection-screen end of line.
selection-screen begin of line.
parameters:     P_COLRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-003 for field P_COLRPT.
selection-screen end of line.
selection-screen begin of line.
parameters:     P_PAYRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-004 for field P_PAYRPT.
selection-screen end of line.
selection-screen end   of block B2.
selection-screen begin of block B1 with frame title TEXT-001.
select-options: SO_KTOKD for KNA1-KTOKD modif id M4,
          SO_BLART for BSIS-BLART modif id M2.
parameters:     P_PAID   type ZCLEAR     modif id M3 as listbox visible length 20.
selection-screen end   of block B1.
at selection-screen output.
loop at screen.
    if P_BIRPT eq 'X'.
      if SCREEN-GROUP1   = 'M2' or SCREEN-GROUP1 = 'M3' .
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    elseif P_COLRPT eq 'X'.
      if SCREEN-GROUP1   = 'M3'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    elseif P_PAYRPT eq 'X'.
      if SCREEN-GROUP1   = 'M2'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
      if SCREEN-GROUP1   = 'M4'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    endif.
endloop.
Thanks
Anil D

Input Method selection broken in Emacs?

I just installed Emacs through "pacman -S emacs", but I can't get the selection of input method to work.
When I hit "C-x RET C-\" or choose "Options/Mule/Select input method" in the emacs menu I get
"Select input method (default rfc1345)" as usual, but when I hit tab to get all the alternatives, usually about 100 alternatives, I get "no match". I also get "no match" if I write "japanese" which should be an alternative, and even if i hit RET to get the default value.
Any idea what could be wrong?
Last edited by django (2007-04-10 19:58:39)

I found an old newsgroup discussion about a similar issue, and it seems I will need leim, as in the package emacs-leim which is in unsupported. I guess all emacs packages I have used in other distributions had this already.
Last edited by django (2007-04-10 20:32:02)

HT5176 What languages are the chinese input methods associated with?

In the help file for iOS Dictation the following paragraph regards to selecting language for dictation
When you want to change the language used for Dictation:
Tap the globe icon to change to the keyboard for that language.
Tap the microphone icon to start Dictation.
Note: To use Dictation, the keyboard language needs to be a supported language. Dictation is designed to recognize the specific accents and dialects of the supported countries listed above. Since every language has its own accents and dialects, the accuracy rate will be higher for native speakers.
Now there are couple chinese input methods for simplified or traditional chinese typing. However, which one relates to "cantonese"? They both use the same characters but with different pronunciation.

Following up, here is the situation:
Using "Chinese Traditional - Changjie" as input method,
1, dictation WILL listen as Cantonese if SIRI is set to Cantonese-Hong Kong
2, dictation defaults to Mandarin if SIRI is set to English
Further testing concluded that regardless of the input method, as long as Siri is set to Cantonese-Hong Kong the dictation can listen to cantonese, and otherwise it cannot.
Is there a way to individually toggle dictation language?

Give a BDC example by Direct Input Method

pl give step by step procedure...
Thanks guyz

Hi
this is the common procedure for all BDc programs
the BDC program should be in this format
Transaction Recorder (SHDB)
How to Upload Presentation Server Flat file to SAP R/3 system???
How to upload application server file to R/3 system?
Definition
Example - Call Transaction Method
Transaction Recorder (SHDB)
Before you work with the Batch Input methods, you should know the purpose of the tool
Transaction Recorder.
Use:
You can use the transaction recorder to record a series of transactions and their screens.
Features:
You can use the recording to create
Data transfer programs that use batch input or CALL TRANSACTION
Batch input sessions
Test data
Function modules.
Note: It doesnt record F1, F4 and Scrollbar movements
Upload Flat file from Presentation Server to SAP R/3
CALL FUNCTION GUI_UPLOAD'
EXPORTING
CODEPAGE = IBM'
FILENAME = P_UFILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = INT_TAB
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10 .
IF SY-SUBRC NE 0.
MESSAGE E999(FR) WITH 'ERROR IN FILE UPLOAD'.
ENDIF.
Upload file from application server to SAP R/3
Open the the application server file
OPEN DATASET <dsn> FOR INPUT <mode>
Read the data from application server file
READ DATASET <dsn> INTO <wa>
And then close the application server file
CLOSE DATASET <dsn>
Definition- Declaring BDC Table
DATA: BDC_TAB LIKE STANDARD TABLE OF
BDCDATA INITIAL SIZE 6
WITH HEADER LINE .
The internal table used to collect the transactions information must be declared LIKE BDCDATA.
Filling BDC Table Method #1
FORM FILL_BDC_TAB.
REFRESH BDC_TAB.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = SAPMF02K.
BDC_TAB-DYNPRO = 01016.
BDC_TAB-DYNBEGIN = X.
APPEND BDC_TAB.
CLEAR BDC_TAB.
BDC_TAB-FNAM = RF02K-LIFNR.
BDC_TAB-FVAL = TEST1.
APPEND BDC_TAB.
CLEAR BDC_TAB.
BDC_TAB-FNAM = RF02K-D0010.
BDC_TAB-FVAL = X.
APPEND BDC_TAB.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = SAPMF02K.
BDC_TAB-DYNPRO = 0110.
BDC_TAB-DYNBEGIN = X.
APPEND BDC_TAB.
CLEAR BDC_TAB.
BDC_TAB-FNAM = LFA1-STRAS.
BDC_TAB-FVAL = 123 Main St..
APPEND BDC_TAB.
CLEAR BDC_TAB.
BDC_TAB-FNAM = BDC_OKCODE.
BDC_TAB-FVAL = /11.
APPEND BDC_TAB.
ENDFORM.
Filling BDC Table Method #2
FORM FILL_BDC_TAB.
REFRESH BDC_TAB.
PERFORM POPULATE_BDC_TAB
USING:
1 SAPMF02K 0106,
RF02K-LIFNR TEST1,
RF02K-D0010 X,
1 SAPMF02K 0110,
LFA1-STRAS, 123 Main St.,
BDC_OKCODE, /11.
ENDFORM.
FORM POPULATE_BDC_TAB USING FLAG VAR1 VAR2.
CLEAR BDC_TAB.
IF FLAG = 1.
BDC_TAB-PROGRAM = VAR1.
BDC_TAB-DYNPRO = VAR2..
BDC_TAB-DYNBEGIN = X.
ELSE.
BDC_TAB-FNAM = VAR1.
BDC_TAB-FVAL = VAR2.
ENDIF.
APPEND BDC_TAB.
ENDFORM.
This two subroutine method to fill the BDC table is preferable because the POPULATE_BDC_TABLE subroutine is reusable throughout all batch input programs.
Example #1 - Change Vendor (Call Transaction Method)
Example #1- Declaration Section
REPORT Y180DM10.
DATA: BDC_TAB LIKE STANDARD TABLE OF
BDCDATA INITIAL SIZE 6 WITH HEADER LINE.
INFILE(20) VALUE /tmp/bc180_file4.
DATA: BEGIN OF INREC.
VENDNUM LIKE LFA1-LIFNR.
STREET LIKE LFA1-STRAS.
END OF INREC.
PARAMETERS: DISPMODE DEFAULT A,
UPDAMODE DEFAULT S.
START-OF-SELECTION.
OPEN DATASET INFILE
FOR INPUT IN TEXT MODE.
DO.
READ DATASET INFILE INTO INREC.
IF SY-SUBRC < > 0. EXIT. ENDIF.
PERFORM FILL_BDC_TAB.
CALL TRANSACTION FK02
USING BDC_TAB
MODE DISPMODE
UPDATE UPDAMODE.
IF SY-SUBRC < > 0.
WRITE: /ERROR.
ENDIF.
ENDDO.
CLOSE DATASET INFILE.
synchronous updating
DO.
PERFORM FILL_BDC_TAB.
CALL TRANSACTION FK02
USING BDC_TAB
MODE N
UPDATE S.
IF SY-SUBRC < > 0.
WRITE: /ERROR.
ENDIF.
ENDDO.
With synchronous updating, we can check SY-SUBRC to determine the success of the transaction and the actual update to the database.
asynchronous updating
DO.
PERFORM FILL_BDC_TAB.
CALL TRANSACTION FK02
USING BDC_TAB
MODE N
UPDATE A.
IF SY-SUBRC < > 0.
WRITE: /ERROR.
ENDIF.
ENDDO.
With asynchronous updating, we can check SY-SUBRC to determine the success of the transaction only, not the actual update to the database.
Error Handling
Write an error report.
Send the record(s) in error to an error file.
Create a batch input session with the record(s) in error.
To store error messages ( CALL TRANSACTION )
data: begin of Tab_Mess occurs 0.
include structure bdcmsgcoll.
data : end of Tab_Mess,
CALL TRANSACTION FK02 USING BDC_TAB MODE N UPDATE S
MESSAGES INTO TAB_MESS.
IF SY-SUBRC NE 0.
WRITE: / Tab_MESS-TCODE, Tab_MESS-DYNUMB, Tab_MESS-MSGTYP ,
Tab_MESS-MSGID.
ENDIF.
i am giving you example for Change Vendor you practice for ur tcode
For our example, we will use the Change Vendor transaction (FK02) to add a street address to an already existing vendor.
Step #1
Use SystemStatus menu path to determine online program name (SAPMF02K), screen number (0110)
Step #2
Use F1 key and Technical Info pushbutton in each screen field to be filled to determine the field name.
Step #3
Determine how to proceed in the transaction
(save the record by clicking on the Save pushbutton or pressing the F11 key).
BDC Table Contents
After researching the transaction we can determine the contents of the BDC table.
PROGRAM DYNPRO DYNBEGIN FNAM FVAL
SAMPF02K 0106 X
RF02K-LIFNR TEST1
RF02K-D0110 X
SAMPF02K 0110 X
LFA1-STRAS 123 Main St.
BDC_OKCODE /11
Batch Input Methods
CALL TRANSACTION USING
STATEMENT
Call transaction - for data transfer
Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
A Display all
E Display errors only
N No display
S Synchronous
A Asynchronous
L Local update
The process flow of CALL TRANSACTION
A program that uses CALL TRANSACTION USING to process legacy data should execute thefollowing steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
Prepare a internal table to store error messages Tab_Mess like structure of BDCMSGCOLL.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION MM01' USING BDCDATA MODE 'A' UPDATE 'S'. MESSAGES INTO TAB_MESS.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
Overview of Batch Input Session
The first batch input method is to create a batch input session. It is the processing of this batch input session that updates the database, not the execution of the batch input program.

Reward if usefull

Default payment method issue in Additional Off-Cycle Payments

Hello everyone,
I have an issue with Additional Off-Cycle Payments and running this in payroll driver.
I have maintained V_T52OCB or "Define default values for payment methods" in IMG as Check (C) but when I run payroll for this employee I see that payroll driver is considering Infotype 0009 which is a direct deposit but when I run the same employee in OFF-CYCLE Workbench I see that the run is defaulted to Check and is not considering Infotype 0009 which is correct.
What I don't understand is the same record when processed through regular payroll driver (RPCALC) is considering Infotype 0009 but Off-cycle is considering default payment method for Off-Cycle defined in IMG.
Has anyone seen this kind of issue?
Thanks,
Hemanth.

Hello Hemanth,
The value you maintain in V_T52OCB is only for defaulting the Payment type in Offcycle Workbench Screen for the Reason you have choosen for the offcycle, it doesn't mean it would be run only by that payment type and you can overrite in offcycle workbench itself by choosing the other payment type.
For Offcycle run it always with the value entered in IT 0009, For off-cycle, if there is a valid record with subtype 5/6, it will be used otherwise subtype 0/1 will be used if payment method selected is according to IT.
If payment method is not according to IT a new record will be created in IT 0009 for the exact date.
For Manual check, the check number can be entered in Offcycle workbench.
I hope it clarified your doubt.
With Regards,
S.Karthik

Could not find Simplified Chinese input method when using FormsCentral

Hi
When I creating files using FormsCentral, I could not find the input method of Simplified Chinese, therefore, the document I created look strange. The font is not what I wanted but I really could not find Simplified Chinese to edit the document. Could anyone please show me how should I do it or where I can download the font pack?

We currently do not support Chinese forms.
Randy

On iOS7, Korean Language Input Method with serious error.

Korean Input Method for iOS7 has serious problems with bluetooth keyboard.
It has absolutely incorrect state transition for the keyboard typings.
Keyboard input and cursor moving are independently acting.
On the word processing apps, when the line changing occurs while typing, error comes on the first word.
It looks like to have very poor performance while typing.
clearing last status of input and transiting to a new state to a new word-syllable are not working properly.
Input method on iOS5 is much stable and better than on iOS7.
iOS7 Korean Input Method really makes me annoying.

For Apple to see this, you need to repost it at
http://www.apple.com/feedback

Ziio 7" Default input method

Similar Messages

Maybe you are looking for