Zimgserv does not show in eDirectory modules

ZENworks Imaging Server will not start. The zimgserv does not show in the eDirectory modules.
# /etc/init.d/novell-zmgserv status
Novell ZENworks Imaging Server Daemon is stopped
# /etc/init.d/novell-zmgserv start
Starting Novell ZENworks Imaging Server Daemon done
# /etc/init.d/novell-zmgserv status
Novell ZENworks Imaging Server Daemon is stopped
# /opt/novell/zenworks/bin/novell-zdm-version
ZENworks Desktop Management Components
ZENworks Auto Workstation Import/Removal -- 7.0.1-8
ZENworks Desktop Management Agent -- Not Installed
ZENworks Application Management -- Not Installed
ZENworks Imaging Service -- 7.0.1-5
ZENworks Inventory Database -- Not Installed
ZENworks Inventory Proxy -- Not Installed
ZENworks Inventory Service -- Not Installed
ZENworks Middle Tier Server -- 3.1.6-0.12
ZENworks Application Management Database -- Not Installed
ZENworks PXE Services -- 7.0.1-0
ZENworks Remote Management -- Not Installed
#/opt/novell/eDirectory/bin/ndstrace -c modules
dsr Not Loaded
snmpinst Not Loaded
smbsharemodes Not Loaded
repair Not Loaded
pkiinst Not Loaded
nmasldap Running
nmasinst Not Loaded
ndsinfo Not Loaded
ndsclone Not Loaded
ncpns Not Loaded
merge Not Loaded
ldapxs Running
lburp Running
krbpwd Not Loaded
dsi Not Loaded
dsbk Not Loaded
chsrvid Not Loaded
backupcr Running
dstrace Running
pkiserver Running
embox Running
sasl Running [ nldap ]
spmdclnt Running
nmas Running [ sasl ]
imon Running
nldap Running
hconserv Running
snmp Running SNMP Trap Server for Novell eDirectory 8.8.4
gams Running
niciext Running
httpstk Running [ nds hconserv imon embox ]
nds Running
masv Running [ gams ]
dsloader Running [ httpstk hconserv nldap ]
dhlog Running
ncpengine Running
ndsd Running Novell eDirectory 8.8 SP4 Host Environment
# ls /opt/novell/eDirectory/lib/nds-modules/
libchsrvid.so liblburp.so.0 libnldap.so.1
libchsrvid.so.1 liblburp.so.0.0.0 libnldap.so.1.0.0
libchsrvid.so.1.0.0 libldapxs.so libpkiinst.so
libdhlog.so libldapxs.so.0 libpkiinst.so.3
libdhlog.so.1 libldapxs.so.0.0.0 libpkiinst.so.3.3.2
libdhlog.so.1.0.0 liblsss.so libpkiserver.so
libdsi.so liblsss.so.3 libpkiserver.so.3
libdsi.so.1 liblsss.so.3.4.1 libpkiserver.so.3.3.2
libdsi.so.1.0.0 libmasv.so libssldp.so
libdsloader.so libmasv.so.0 libssldp.so.3
libdsloader.so.1 libmasv.so.0.0.0 libssldp.so.3.4.1
libdsloader.so.1.0.0 libmerge.so libssncp.so
libdstrace.so libmerge.so.0 libssncp.so.3
libdstrace.so.1 libmerge.so.0.0.0 libssncp.so.3.4.1
libdstrace.so.1.0.0 libndsclone.so libsss.so
libgams.so libndsclone.so.1 libsss.so.3
libgams.so.0 libndsclone.so.1.0.0 libsss.so.3.4.1
libgams.so.0.0.0 libndsinfo.so libzenimgds.so
libhconserv.so libndsinfo.so.1 libzenimgds.so.1
libhconserv.so.1 libndsinfo.so.1.0.0 libzenimgds.so.1.0.0
libhconserv.so.1.0.0 libnds.so libzimgserv.so
libhttpstk.so libnds.so.1 libzimgserv.so.1
libhttpstk.so.1 libnds.so.1.0.0 libzimgserv.so.1.0.0
libhttpstk.so.1.0.0 libniciext.so
liblburp.so libnldap.so
# cat /etc/*-release
LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64"
Novell Open Enterprise Server 2.0.1 (x86_64)
VERSION = 2.0.1
PATCHLEVEL = 1
BUILD
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 2

dbenjamin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Map does not show in Map Module

I'm using Lightroom 5.4 on a Max 10.9.3. The map does not display in the Map Module. All I get is a blank screen. At on point I briefly saw the message the Map is Offline, with a map of the world, but then it said Map was Online and all I have is the blank screen. Can you help, please?

Do you have Lightroom installed on a case-senstive partition? See here for more details and troubleshooting:
Map module is white | Mac OS

Lightroom 6 Develop Module does not show photos, Library Module does show photos

This is what I see in the Develop module after installing Lightroom 6. Lightroom 5 runs fine on the same Laptop. Is this a GPU issue? Configuration issue? End user issue? I'm running a Lenovo T430 with Windows 7 Enterprise 64BIT. I purchased and installed LR 6.0 22-April-15.

I too have the same problem in lightroom CC as you ( after updating on 30/4/15 ) and have looked all over the internet. I had read something in the Adobe forum site suggesting a problem with the Graphics Processor, but it was not specific to our problem in lightroom. When I also checked photoshop ACR, it too showed the same as your screen shot. And all worked OK in lightroom 5 and photoshop 2014. It did not seem to make any sense at all ! I haven't unchecked " use Graphics Processor" option, but I will soon after I reply to you and had a rest after hours of trawling through internet sites looking for the answer. I use win 7 home premium desktop 64 bit on a 1 year old PC.
Thank you GrandpaCamera for your contribution, and a picture is better then a thousand words. By Michael.

Insert into viewobject in app module does not show entity validation errors

Hi everybody,
I am using JDeveloper 10.1.3 and ADF BC/ADF Faces. I want to have a button on one of page and I want that whenever user clicks on this button a records is inserted in a table. so I created an application module service method and exposed it on the client interface and the put it on my page using Data Controls Tab.
Here is some part of my code in application module :
public void setMember() {
HrMembershipsViewImpl membershipView = (HrMembershipsViewImpl)am.findViewObject("HrMembershipsView1");
HrMembershipsViewRowImpl newRow =(HrMembershipsViewRowImpl) membershipView.createRow();
newRow.setAttribute("MemberId",memberID); //this.getCode());
newRow.setAttribute("MembState","1");
newRow.setAttribute("CardState","1");
membershipView.insertRow(newRow);
trans.commit();
When this method tries to insert a record which violates a validation rule in the Base Entity Object, the screen does not show any error regarding to violating the business rule but nothing is inserted. I changed my code and captured the exception around the commit and I found that a JBO-27023 Exception happened after commit ( which was very surprise since the page does not show any error).
Now I can change my code to to the following to show that error happened.
public void setMember() {
try {
trans.commit();
catch (JboException ex) {
getDBTransaction().rollback();
throw new JboException ("There is an error during commit");
throw ex;
But I believe it shouldn't be like this. Normally, we should be able to insert programmatically in a view and if the business rules are violated we should get the violation error messages. If I use the above mentioned method we can not understand what business rules are violated.
Does anybody know what is wrong with my solution? I have seen a lot of times that using application module is the best way for adding functionality to the application pages but I really feel that something should be wrong if we can not get business rule violation messages.
Any help or references would be highly appreciated.
Thanks in advance,
Navid

Hello Navid,
it should work without try-catch.
1. When you add try-catch, does your error message appear on the page?
2. Does your page contains af:messages component?
3. Does your button have any navigation to another page?
Rado

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

The library module in 4.3 version does not show all the images

The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do? Get this fixed now!!!!!!!!

My bet would be on a corrupt preview folder.
Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews. See if that fixes it.
If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html

Preview module does not show ajustments

Hi everyone
This is a problem that has arisen very recently.
When carrying out adjustments in the develop module the preview image does not show the changes however the thumb nail in the filmstrip at the bottom of the screen does.
Can anybody help please as it is rendering the programme unusable.
Many thanks

Sorry Keith details as follows
What version of Lightroom? 5.4
Have you installed the recent updates? Yes
What operating system? Win 7 x64
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive? Intel I7, 16GB ram, runs from 1TB D drive with 580GB of space
Has this ever worked before? If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? Recently added the following Dr Brown services, Adobe paper textures pro, Adobe watermark, Adobe emailer
Thanks

Nexus 7009 does not show the N7K-F248XP-25 modules ethernet ports n sh run

Hi everyone,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the Ethernet ports of these modules, even with the show inventory and show module I can see that the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

You can enable F1, F2, M1, M1XL and M2XL Series modules. There are no restrictions on the type of mix allowed for the system module-type command. The system module-type command allows a mix of F1, F2, M1, M1XL, and M2XL Series modules in the VDC.
Note The limit-resource module-type command controls the restrictions on the module-types that can be mixed in the VDC.
Note Use the system module-type f2 command to allow F2E Series modules into a VDC. The ports from F2 and F2E Series modules can be allocated like any other ports.
Note The modules that you do not enable must not be powered on after you configure this feature and enter yes. An error message will force you to manually disable these modules before proceeding. This prevents major disruption and service issues within a VDC.
The no form of this command resets the configuration mode to allow all modules.
hope this helps

Tab navigation does not show at all in FP 10 it shows in FP9

Hi,
I have module that is loaded at runtime,
it has simple tab navigation with 3 children,
in FlashPlaer 9 Debug, tab navigation shows fine, even
thought for some reason it looks like linkbar :)
also numericStepper looks like inputBox and ComboBox has no
arrow, (they all look fine in FB 3.2)
in Flash player 10 tab navigation does not show at all, is
there any obvious thing that I am missing ?
I am guessing something terribly wrong with flex styles, but
I am not overriding any styles,
my environment :
vindows Vista 64 bit (although I use jvm 32)
project is build with latest flex sdk :flex_sdk_3.3.0.4589
P.S: I cant attach image here, so I will record video
tomorrow, if that will help.
thanks in advance
Levan

bump :)
anybody , please please :)

VC - new characteristic does not show in PS BOM explosion / CU50

Hello World,
we added a new Characteristic to a class that is basis for a Material BOM explosion. In transaction CU50, the new characteristic can be configured by selecting its single values and the result shows up correctly in the BOM explosion.
Unfortunately, it is does not show up in the BOM explosion result of the SAP PS module @ Network Activity where the explosion is done concerning to our biz process. All other characteristics explode properly in the PS BOM explosion. I have no clue about the difference of the newly added characteristic is that makes it behave differently (only) in the PS system, not showing up in the result.
In CU50 @ Menu Extras @ Result I found a trace of the difference, but cannot interpret it due to a lack of documentation of the resulting screen that is entitled "Configuration : Result". Here, in table "Detail List", only the faulty new characteristics show additional extra Dependency entries with a light green background that cannot be found with all other characteristics in the same table. These extra entries can be drilled down by double-click and produce a pop-up window that shows some status information and the dependencies source code.
Question: what do the extra entries of dependencies say, why are they shown and why not at other characteristics?
By understanding this difference I hope to find the reason why these characteristics are not exploded in the PS module (which is my primary question).
Thank you for a helpful answer!
Marcus

Hi Jong - Moon cho,
Please check following setting,
1.Consider setting the Individual/Collective indicator to 2. (MRP 4 view)
2.In order to get dependent requirements from the planning of configurable materials, components should not be configured with strategy group 70 or 59.
Also refer the bellow link
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
Regards
Girish

BP email does not show in list

Hi All.
A client is experiencing an issue where one user cannot view the BP's email address.
They go to the BP master data screen, does a wildcard search so that a list of all BP's comes up.
Even when they do a wildcard search on the email filed it does not show.
This user has rights to to BP module.
The form settings are correct as the email field is ticked and the visible checkbox is showing.
It is for this one user only.
What could be the issue?

Hi,
Have you let the user log on different Client to check?
Thanks,
Gordon

CJC channel does not show up in MAX

Greetings,
I have an SCXI 1124 that I am reading in 32 TC's with. When I try to configure it for CJC internal under MAX for physical channel it does not show up as described in "DAQmx Acquire CJC Temperature". In that document the CJC physical channel should show up as a string similar to SC1Mod1/_cjcTemp but all I see under MAX under the 1124 is ai0-31. I know this should be obvious but could someone shed some light on this and explain my oversight.

Hi teslac,
The SCXI 1124 is an Analog Output module. Could you mean an 1121 or 1125 possibly?
Also, are you scanning the cjc temp channel along with the thermocouple channels? There are some SCXI modules that have to scan only the cjc temp channel without any other channels. You can find this information int he KnowledgeBase article below.
How Can I Address and Use Cold Junction Compensation (CJC) with SCXI Modules?
Hope this helps!
Robert R. | Applications Engineer | National Instruments

Enterprise subordinate CA does not show up in certificate authorities list

After much discussion I decided the best approach was to clean eveything up and start over. I went through the KB on decommissioning an enterprise CA and Subordinate CA, install a new standalone root, and a new enterprise subordinate CA. Everything appeared
to be working with one exception. The new Enterprise Subordinate does not show up in the Certificate Authorities section of Public key services in AD Sites&Services. It does show up in AIA, CDP and Enrollment services. The standalone root is trusted and
I set up group policy with the certificate of the Enterprise Subordinate as a trusted intermediate. The templates were configured also as well as autoenrollment for computers but so far only the DCs and my workstation has received certificates. I am sure I
am missing something but after 100s of pages and artcle after article I don't see it. I ran the certutil -viewstore query and it doesn't see it either and it doesn't tell me how to fix it. Also, what is the deal with case; it seems no matter how careful I
was with upper and lower case letter AD did what it wanted and my published CA name looks like I can't figure out hows caps lock works.
Thanks in advance
[email protected]

yes, it is possible. However, you will need to make some modifications on root CA:
certutil -setreg ca\dsconfig "AD Configuration naming context"
certutil -setreg ca\dsconfigdn "AD Configuration naming context"
certutil -setreg ca\dsdomaindn "AD Forest root domain DN"
AD configuration naming context is (usually) CN=Configuration, DC=rootdomainname, DC=domainsuffix.
To extend Root CA CRL validity, in the Certification Authority MMC, select properties of Revoked Certificates folder and specify validity period (something about 6-12 months). Make sure that Delta CRLs are NOT enabled. Save settings and restart certificate
services.
Then you should republish all CRLs and publish CRL to Active Directory:
certutil -dspublish -f path\RootCAcrl.crl
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Windows PKI reference:
on TechNet wiki

Wlst command listWebServices() does not show all web services in the domain

Hi, I am trying to use wlst command listWebServices() to display all web services of a domain. It seems that it only displays the web services of enterprice applications (ear apps), but it does not show the web services of web applications (war apps). If I pass ear appliication name and one of its web module to listWebServices, it will show the web services that belong to the web module of this application. However if I pass war application name and its web module name to listWebServices, it will return "Unable to find the SOA Composite or Service. Oracle UCM Native Web Services", although I can see from wls admin console or em that this web application does have a couple of web services.
I also tried to call listWebServicePolicies, again it returned "Unable to find any Web Services with the specified Application".
My purpose of doing above is to use wlst to detach/attach web service policies for some web services. Since I cannot find the web services, I off course cannot detach/attach policies.
Does anyone have any clue how to find web services using wlst command that belong to a war application, and then detach/attach policies ? Any help will be greatly appreciated.
Thanks,
Jian Huang
From Oracle fusion HCM

As of UCM version 11.1.1.6, Oracle UCM Web Services are managed from Enterprise Manager in Fusion Middleware Control, not Weblogic Admin Console!
A document at Oracle support explains this in more detail: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1456506.1 :
Setting up GenericSoapService in WLS to use WS-Security:
Go to FMW Enterprise Manager. http://wlshost:7001/em
In the tree, navigate to Weblogic Domain -> <Domain Name> -> and click on UCM_server1. (If the managed server for WCC is named something other than UCM_server1, click on that name.)
From the UCM_server1 drop down menu, select "Web Services".
On the "Oracle Infrastructure Web Services" tab, click the GenericSoapPort link.
Once there you can set the policies you want and restart the server!
Regards,
Göran
Edited by: Göran Paues on 2012-aug-20 10:02

[solved] ASUS Zenbook UX305FA -- lsblk does not show harddrive

Hello, I am installing Arch Linux on the recently released Zenbook UX305FA. The reason I specify newly released is because I believe that the hard drive, a 256GB SSD "Micron_M600_MTFDDAV256M", does not have driver support out of the box by Arch Linux. I have reason to believe it does have support by other distros out of the box, as per this happy customer: http://www.amazon.com/review/R2UHFYMBSR … 87-3090311
So yeah, lsblk does not show the hard drive. It just shows my USB as /dev/sda. Any thoughts?
EDIT:
Please see progress from this thread: https://www.reddit.com/r/archlinux/comm … _does_not/
Basically, if you follow the thread, I realized that turning off secure boot means the hard drive disappears from accessibility. Another thing to note was that it would also be removed from view if it failed to load, which in my case, was due to a messed up partitiioning then file system setup.
Last edited by genki (2015-03-26 21:20:15)

Hi, I bought the UX32VD a few weeks ago. Most of the steps, mentioned in the article about the UX31A apply to the UX32VD too. I don't know what your problems are. All the steps are explained.
[ 8.039202] asus_wmi: Can't find DSTS
Just patch the kernel with the mentioned fix, or use the dkms variant. This will fix the can't find DSTS issue. After that, the asus-nb-wmi (or sth. like that) module will be loaded successfully, which makes most of the function keys work (except the screen brightness keys). The only thing remaining is to use the supplied hackarounds to be able to change the screenbrightness.
After these steps, I created a .Xmodmap to remap the automatic kbd. backlight key and the touchpad disable key to XF86MonBrightnessDown (or so .. can't remember the exact name) and XF86MonBrightnessUp and respectively mapped the shortcuts with xfce4-keyboard-settings (XF86MonBrightnessDown to the command backlight down, XF86MonBrightnessUp to backlight up). Unfortunately, sometimes this is a little bit buggy. The scan codes change randomly on some reboots, eg: one time it gets recognized as XF86MonBrightnessUp, and a few keypresses later as something different.
Hope they fix this issue with the 3.5 kernel, and eventually get the actual screenbrightness buttons to work.

Zimgserv does not show in eDirectory modules

Similar Messages

Maybe you are looking for