Zip file not open in portal

Dear all,
I have encountered a problem while opening a zip file in portal it can't open. Once we click on R/3 side its working fine but the same thing happen in portal its not open if we are pressing CTLR button than it will open in portal what's the prob .Can anyone give me some highlights on this issue.
Regards

Hi,
Pls check this linK:
Re: Opening a .zip file from Enterprise portal
Thanks and Regards,
Shyam.

Similar Messages

ZIP FILES NOT OPENING.

When I double-click the icon, superfast stripedbar on dialogue box appears so quickly I cant read it. Then nothing happens/appears/or is in finder. MacBookPro.
Thank you!

try booing into the recovery HD by holding down Cmd-R when booting up, then run a repair disk and disk permissions. It also wouldn't hurt to reset your ACLs either. You may also want to try a 3rd party app like Stuffit

Getting Message as "File not open", when I ran background Job

Hi,
I developed a Migration Program, Which reads the data from Application serever and procced with further process in back ground mode.
Same program is workind fine in Development System in Back ground mode (SY-BATCH = 'X', Scheduled a batch Job). So I transported to Quality system.
Now When I run the program in background mode (SY-BATCH = 'X', Scheduled a batch Job), getting Message as "File is not Open" at Quality system. So I debugged the Batch job through "JDBG", and found file opening and reading the content sucessfully.
But its not working without debugging mode and getting message as "File not open".
Is there any Authorizations required for background mode (without debugging).
So can you please help me on this how to solve this issue.

Try this code:
DATA: PATH_NAME(80) TYPE C,
        LV_FILENAME TYPE STRING.
DATA: LW_XSTRING         TYPE XSTRING,
        X_LEN             TYPE I.
DATA: FILE_AUTH_ERR TYPE REF TO CX_SY_FILE_AUTHORITY,
        FILE_OPEN_ERR TYPE REF TO CX_SY_FILE_OPEN,
        FILE_OPEN_MODE_ERR TYPE REF TO CX_SY_FILE_OPEN_MODE,
        FILE_CLOSE_ERR TYPE REF TO CX_SY_FILE_CLOSE,
        FILE_CONVERSION_ERR TYPE REF TO CX_SY_CONVERSION_CODEPAGE,
        FILE_TOO_MANY_ERR TYPE REF TO CX_SY_TOO_MANY_FILES,
        MESS TYPE STRING,
        W_TEXT TYPE STRING.
DATA: L_RC TYPE INT4.
concatenate pathname lv_filename into lv_filename.
TRY.
      OPEN DATASET LV_FILENAME FOR INPUT IN BINARY MODE MESSAGE MESS.
    CATCH CX_SY_FILE_OPEN_MODE INTO FILE_OPEN_MODE_ERR.
      W_TEXT = FILE_OPEN_MODE_ERR->GET_TEXT( ).
      L_RC = 1.
    CATCH CX_SY_FILE_AUTHORITY INTO FILE_AUTH_ERR.
      W_TEXT = FILE_AUTH_ERR->GET_TEXT( ).
      L_RC = 2.
    CATCH CX_SY_CONVERSION_CODEPAGE INTO FILE_CONVERSION_ERR.
      L_RC = 3.
      W_TEXT = FILE_CONVERSION_ERR->GET_TEXT( ).
    CATCH CX_SY_TOO_MANY_FILES INTO FILE_TOO_MANY_ERR.
      L_RC = 4.
      W_TEXT = FILE_TOO_MANY_ERR->GET_TEXT( ).
    CATCH CX_SY_FILE_OPEN INTO FILE_OPEN_ERR. "File already open
      L_RC = 5.
      W_TEXT = FILE_OPEN_ERR->GET_TEXT( ).
ENDTRY.
IF L_RC = 0.
    L_RC = SY-SUBRC.
ENDIF.
IF L_RC <> 0 OR SY-SUBRC NE 0.
Issue Error message in open file.
   CONCATENATE MESS 'Open dataset failed' w_text INTO MESS SEPARATED BY SPACE.
   message Exx(yyy) with mess.
      ELSE.        "file exists and can be opened
ENDIF.

PDF File not opening in browser for sharepoint 2010

Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
it always open in browser
I have already made following changes but didn,t work
Set browser file handling to Permissive from central admin
Set "open in browser" in setting s of doc library
Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
Installed Adober eader in client machine
Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

JNLP file not opening in Windows 8 and IE 10

I am trying to launch the ROES ordering tool through WHCC prints and it has always worked on my other IE 10 through Windows 7 but on my new computer with Win 8 I cannot get it to launch because of the JNLP file not opening... and it won't work on desktop
mode either... What do I need to do??

Hi,
Have you installed the java Runtime Environment?
If not, I would also suggest you to refer to the link to install the latest version of Java:
http://www.java.com/en/
Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Then follow the link to set default programs as Java for the file:
Choose the programs
Windows uses by default
http://windows.microsoft.com/en-US/windows-8/choose-programs-windows-uses-default
Hope this helps,
Ada Liu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Pdf file not opening on pushing fdf file with F key in Adobe Reader

Well i am a novice developer in case of PDF Development.
The problem which i am facing is:-
In our application a PDF document submits the data to server and server sends back FDF to client with f key as http path of PDF which is present on web server.
This all works well in acrobat professional 7.0 but in abobe reader 8.0 the PDF file doesn't open up on pushing FDF.
On debugging the problem i found out that if server sends response within 480 milliseconds then reader is showing the pdf otherwise it don't shows up.Since in our application it will always take more than this time because of several operation performed to serve the request posted to server,So the
PDF will never show up in case of reader.
I was unable to understand what make it special in acrobat professional that session lasts more than 480 milliseconds whereas in reader the session doesn't last that long.
I really need uregent help on this.
Thanks in advance for help.

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

I get an error message 7-Zip file not found

When I am trying to download Mozzila I keep getting an error message that states 7-Zip file not found and it won't let me download the browser.

Hello psimonsen, you don't need 7-zip program to download official firefox, see: [https://support.mozilla.org/en-US/kb/install-firefox-windows Install Firefox on Windows]
another official link : http://www.mozilla.org/en-US/firefox/all/
thank you

Salaryslip not opened in portal

one of the employee salaryslip not opened in portal it gives 500 internal error why?

Dear,
Please let me know if you have implemented the BADI XSS_REM_INTERFACE. If you have implemented this
BADI, please make sure that all the methods are implemented correctly. you should implement all the methods in the new implementation. If you do not require any specific implementation, you can copy the default implementation of methods in the class
CL_DEF_IM_XSS_REM_INTERFACE. Also kindly refer to note 901850 for more details. The note is attached to the message.
Best Regards,
Deepak..

Quick Time file not opening

Suddenly QuickTime 7.5.5 stopped opening the movies stored in one Hard Disc.
Here are descriptions of how problem occurs:
1) The preview in finder +column view+ shows only blank space, but not a movie.
2) Instead of opening the file QT claims that "This is not a movie file"
3) Not all the movies in the disk are injured but about 80 % of them. There might be in same folder movies that behaves normally and movies that behaves as described above.
I have restarted the machine few times and repaired the disk with disk utility, with not any couraging results...
If there were any ideas what the problem might be, and how to fix it, advices would be very much appreciated.
Screenshots of the problem:
http://koti.welho.com/tsuonio1/File-not-open.jpg

Two possibilities spring to mind. One is that the HD itself has been damaged somehow. Try copying one of the "bad" video files to your boot drive and opening from there. If it won't copy, your HD is clearly bad, if it copies and plays then something weirder is going on with the drive.
The other possibility has to do with the h264 codec you used. Apple's implementation of the H264 standard is a work in progress, they've been gradually adding features that are part of the full standard and may have broken something. If you recently upgraded QT that may be the problem. If you created the files using a third party H264 codec that might explain the playback problems. Also, you should install Perian (www.perian.org) and see if that helps, their codec plays back many formats that Apple doesn't support out of the box.
You may need to upload one of the bad files to an filesharing website of some kind so that other folks here can download and look at it themselves.

.indd files not opening with recently installed Indesign CS3

The .indd files don't have the Indesign icon next to them, instead they have the win32 icon. When I double click on one of the files an error message appears telling me that...
"this file is not a valid win32 application"
Even when I right-click on the file and choose to open with Indesign, it tells me the same thing. Also in this options menu, Indesign is not shown with the Indesign logo next to it, but rather the windows generic 'unknown file type' logo.
If I open Indesign first however, and then choose file>open and choose the file. It opens fine.

Exactly my situation yesterday, with the icon disappearing and INDD files not opening within InDesign from Explorer.
I'm using an early XP Pro, which I guess qualifies it as 32 bit.
The steps to rebuilding everything using the Folder Options in Windows Explorer are:
Tools > Folder Options > File Types
If INDD is not listed, click the New button to creat an entry, otherwise select it and click the Advanced button.
You have an option to change the icon, so navigate to C:\Program Files\Adobe\Adobe InDesign CS3 and select the InDesign icon.
Then under actions you need to create four actions that will relate to the context menu choices when you right click an INDD files, so click New and add actions for edit, open, preview and print.
In the Application used to perform action box enter "C:\Program Files\Adobe\Adobe InDesign CS3\InDesign.exe" "%1"
Those quote marks are important. Just browsing to InDesign.exe will fill the box for you, but for some reason - for me at least - it creates the %1 indicating to open the file you selected, but it doesn't wrap it in quotes. And without those quotes (at least on my machine) InDesign will start but won't load the file.
There is also a check box to use DDE. I don't know what's appropriate here, but I ticked the box and it works OK.
k

PostScript request output is askng to save or open .zip file not .ps file

Hello,
I have created a new simple customized report for PostScript testing, but once I run the request and view the output. It asks to save or open .zip file.
Any Idea?

Please post the details of the application release, database version and OS.
I have created a new simple customized report for PostScript testing, but once I run the request and view the output. It asks to save or open .zip file. How did you create the report? Please mention the steps.
Is this a concurrent program? If yes, what if you download the output file from the server and open it on the client machine?
Thanks,
Hussein

Photoshop CS1 files not opening with a double click?

I'm not sure if this is an Adobe related issue, but I recently installed Tiger on my 2005(white/1.33ghz/PPC G4) ibook. With Panther, and with every other OS/application, I was able to double a Photoshop File and have Photoshop open along with the file. Here's what happens now: I double click the photoshop file (any photoshop cs1 file), Photoshop opens, but my file doesn't open. I have to find the file and open it from the menu bar in order to access it. This is very annoying for me as I open Photoshop files more than anything. Here's what I've done: I got info on the Photoshop file to make sure Photoshop CS1 is selected as the host application. Check preferences and settings in Photoshop, (didn't find anything related though, but everything is the way they were when I was on Panther. Possible Obstructions: I also have Photoshop 6 on 0S 9 installed on my computer. I have many filters on this version that I don't on CS1. I don't think this is the reason but I could be wrong. Any help with this issue would be greatly appreciated. Thank you in advance.
-Ellz

Except Adobe tells you to reinstall Photoshop (or least that has been their recommendation), which is completely unnecessary. The problem is that this is missing when you do a system upgrade:
"/Library/ScriptingAdditions/Adobe Unit Types"
Reinstalling Photohop will, of course, create the ScriptingAdditions folder and place the "Adobe Unit Types" file inside it. If you still have your Previous System folder, or a backup of it, or access to another machine with Photohop installed, you can simply put the ScriptingAdditions folder into your /Library folder. If not you can create the ScriptingAdditions folder yourself (note there is NO space in the name), then download and unzip this:
http://homepage.mac.com/francines/pdfs/AdobeTypes.zip
and put the "Adobe Unit Types" into the ScriptingAdditions folder.
Francine
Francine
Schwieder

Password protected files not opening with acrobat reader 9

I receive text file embedded in a PDF which is password protected. I just changed my comp from Vista to Windows 7 64 Bit and got the reader 9 duly updated. Earlier I was using reader 7 and the files used to work and open. Now they do not open and their is a big PIN mark on giving the password. The following message is displayed "Acrobat cannot open the file attachment because your PDF file attachment settings do not allow this file type to be opened" the file type is ZIP. Please help

But it did work on windows vista with reader 7. If it is not at all possible then
my question is can I uninstall reader 9 and install reader 7.
will it work on windows 7 64 bit

OSX Zip files not readable by PC

The brilliant Compress feature isn't working on the other end - won't work on PCs - or possibly these PC users are just idiots. LOL
At firs they said they could not open it - now, they are telling me -
"After downloading the file and then extracting the file, I get an empty folder called, "_MACOSC""
The zip file opens perfectly here. So is the OSX Compress feature useless for going to other platforms? Should I just use Stuffit or something else so it can be simple enough for PC guys to be able to use?

Sorry fore the delay in getting back... holidays and all.
Are you sure you are mailing attachments with the "Windows Friendly Attachments" checked?
They would have been uploaded/downloaded through Google docs as a Zip file. Regardless, AFAIK Zip should be universal and not needing a "windows" box, but will keep an eye on that in future uses of OSX Mail. Thanks!

Acrobat reader file not opening

i can not open this PassportApplicationForm_Main_English_V1.0.zip file with acrobat reader X , this file before downloading asked to install acrobat version 9 and above which i did.

You need to unzip the file before using Reader.

Zip file not open in portal

Similar Messages

Maybe you are looking for