Zip files required for Reporting and Analysis

Hi All,
Kindly share me the Zip files(File Name) required for configuring the Report and Analysis for the version 11.1.1.3.
Thank and Regards
ChiDam

Depends which products, have a look at - http://docs.oracle.com/cd/E12825_01/epm.111/epm_install_11114/frameset.htm?ch02s02s03.html
It says 11.1.1.1.4 but just change it to 11.1.1.3
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

SmartView connection for reporting and analysis

Anyone else using version 11.1.2? We have installed SmartView and there is not an option to change service provider so that we can connect to reporting and analysis. We have successfully connected to the HFM office provider, however when entering the listxml URL for reporting and analysis like we entered the HFMofficeprovider it cannot connect. Oracle has advised us there is supposed to be the ability to add a service and we are missing that. They have advised that we run the EPM configuraton again, however we dont think that will help since we have run this a few times already. We are waiting feedback but just reaching out if anyone else has or had this issue
Edited by: jshoe on Jun 17, 2010 1:35 PM

With 11.1.2, Smart View uses Workspace to keep track of the Shared Connection providers (including R&A). It should show up as "RAFramework - 11.1.2 - Reporting and Analysis Framework".
R&A registers with workspace when it is configured. In order for workspace to pick up this regsitration, you have to re-run the configuration for the Foundation tasks of "Configure Logical Address for Web Applications", "Configure Oracle Configuration Manager" and "Configure Web Server".
I would then re-boot the server for the changes to take affect.

Batch file enable for commenting and analysis in Adobe Reader

I have over 18000 GeoPDFs created and want to enable for commenting and analysis in Adobe Reader. Can anyone step me through how to set this up in Adobe LiveCycle?

To enable the Commenting in Adobe Reader you can either use Acrobat or LiveCycle Reader Extentions.
But, in Acrobat (even in Acrobat X) you cannot enable those Usage Rights via batch.
This means you will have to do this for each file separately.
Attention: The commenting will only be enabled for static forms (PDF-forms), not for dynamic forms (XFA-forms)!
Possible the LiveCycle Reader Extentions can do that, but this product is very, very expensive and I don't have it.

Port 6800 is Shutting down for Reporting and Analysis Framework

I have successfully (based on no errors in the log) installed and configured ReportingAnalysis and FR in Wintel 2008 and 11.1.2 environment but when services are started port 6800 and starts but shuts down after few minutes and get Namespace Process Error while logging into Workspace.
Upon looking into log files, I found following:
[2011-02-17T12:10:46.854-05:00] [EPMRAF] [ERROR] [] [oracle.EPMRAF.com.brio.one.component.property.impl.database.PropertyDBManager] [host: serverDNS] [nwaddr: serverIP] [tid: 10] [userId: serverDNS$] [ecid: 0000IsoaY2IEcLPMyeU^MG1DNLQ8000003,0] [SRC_CLASS: com.brio.one.component.property.impl.database.PropertyDBManager] [SRC_METHOD: addPropertyDefinitionsToAggregate:?] [originator_name: GlobalServiceManager] ERROR - more than 1 propertyDefinitionChildren exist for ArrayPropertyDefinition 0ad72289-0002-0415-000000ea038ab234
Thanks for your help in advance!

I have the same error as the original poster in my GSM log.
lsof -i:6800 returns the proper pid for financial reporting. Everything appears to be running correctly.
However, when i try to connect using financial reporting studio I get this error:
[2011-03-24T11:04:41.964-07:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core.reporting.reportstore.ReportStoreManagerImpl] [tid: main] [ecid: 0000Ivd22Jz3FCWjLxrI8A1DYsSo000000,0] [SRC_CLASS: com.hyperion.reporting.reportstore.ReportStoreManagerImpl] [SRC_METHOD: createRepositorySession] [[
com.hyperion.reporting.util.HyperionReportException: ; nested exception is:
     javax.jcr.LoginException: System 9 Platform error: GsmNotFound.
     at com.hyperion.reporting.reportstore.ReportStoreManagerImpl.createRepositorySession(Unknown Source)
     at com.hyperion.reporting.reportstore.ReportStoreManagerImpl.<init>(Unknown Source)
     at com.hyperion.reporting.client.ReportClient.<init>(Unknown Source)
     at com.hyperion.reporting.client.DesignerManager.getRemoteConnection(Unknown Source)
     at com.hyperion.reporting.javacom.DesignerManagerComImpl.getRemoteConnection(Unknown Source)
Caused by: javax.jcr.LoginException: System 9 Platform error: GsmNotFound.
     at com.hyperion.reporting.jsr283.foundation.FoundationRepository.joinSession(FoundationRepository.java:223)
     at com.hyperion.reporting.jsr283.foundation.FoundationRepository.login(FoundationRepository.java:90)
     at com.hyperion.reporting.jsr283.foundation.FoundationRepository.login(FoundationRepository.java:107)
     ... 5 more
The GSMNotFound error makes me feel there is something going on with my port 6800.
Weird. Any ideas anyone?

Hyperion Reporting and Analysis

Hello Gurus,
So I installed Hyperion (11.1.2.2) foundation services(all componants), essbase(all componants), planning (all componants. well, it was only one componant), Reporting and Analysis framework (web application, services and common libraries. i installed only these two because hyperion planning depends on them), financial management ADM driver (chosen by default when i want to install hyperion reporting and analysis). i installed them and configured them all togather. I'm using a Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Windows 2008 SP2 32bits.
Configuration of Reporting and Analysis framework failed, and that caused several problems when i ran the EPM system Diagnosis. this is what i got. Note: I'm gonna list only the errors/warnings in anything other than reporting and Analysis. as for reporting and analysis, i'm gonna list everything. sorry it's so long....
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S7bc8):
"applicationId" property missed
"RA_PRODUCT" parent missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: ORA-00942: table or view does not exist
Recommended Action: Refer to the validation logs for exception details.
0 seconds
Reporting and Analysis
FAILED CFG: Configuration Validating that configuration tasks have been completed
Error: EPMVLD-01004: The following configuration tasks have not been completed:
FrameworkServicesConfiguration: Configuration Failed
Recommended Action: Attempt to configure referenced tasks
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
5 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if RAF Services are available.
No RAF Services (Agent Module) components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if all required RAF properties exist under the Reporting and Analysis Setup component.
The Reporting and Analysis Setup component is not found.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if Agents are available.
No Agent components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
0 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
0 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many Many thanks in advance,
Zain

Hello Krishna,
yes, looks like i didn't have moduke 7 downloaded. however after i did and installed it, i still got the following errors that seemed to do with connectivity to RAFRAMEWORK and it's database. I am going to list errors in all modules, except for Reporting and Analysis, i'm going to post everythign else.
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource property raframeworkDatasource not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource JNDI property raframeworkDatasourceJNDI not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
Reporting and Analysis
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
6 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if IR BI Services are available.
All IR BI Services are available: IRBI_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Found: 37.
0 seconds
PASSED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: There is inconsistency between Registry and V8_SERVICEAGENT for the following items: JF1, SB1, RM1, ES1.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Found: 6.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR Job Services are available.
All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
3 seconds
PASSED RA: Reporting and Analysis Check if RAF Services are available.
All RAF Services are available: RAF_AGENT_MODULE (Agent on dc-hyperiont01), RAF_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if IR Log Services are available.
All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
1 seconds
PASSED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Data in Registry and database are consistent.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR DAS Services are available.
All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists.
Found: 1.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Found: 2, which is more than 1. This indicates some problem.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required RAF properties exist under the Reporting and Analysis Setup component.
All required properties exist.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
PASSED RA: Reporting and Analysis Check if Agents are available.
All Agents are available: Agent on dc-hyperiont01.
0 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
11 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
16 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
1 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many many thanks in advance,
Zain

Reporting and analysis Server Issue

I have Installed OEPM 11.1.2 and configured everything and all of them were successfully configured except for Reporting and analysis where it failed to deploy to the application server. What could be the issue. I couldn't log in to workspace as it says the reporting and analysis server is not up and running at port 6800.
When I validated the setup it advises me to start the web analysis application and run the configuration again but there is no specific Web Analysis service in listed in the services window. Whatever the services are listed I've started and ran the configuration again but no success. Am i forgetting something?
Please help me with this guys. Thank You.
Junaid

Hi Junaid,
OS is OK!
It seems some services not configured correctly; I can just comment if possible then you can stop all hyperion services and reconfigure most of the time it resolve issues related to Configuration.
Thanks
Focusthread Hyperion Trainer
[http://focusthread.com/training]

Product ID for Enterprise Query, Reporting, and Analysis package

Hi Experts,
I try to install Enterprise Query, Reporting, and Analysis package(CD number : 51033475)
Installation setup asks the Product ID,
How can i find the correct Product ID for this installation,
Regards

For Partners and SAP, the license id is contained in a word document that is in the Download Manager.
We are also trying to install this package, but it seems only the SAP drivers and not the BO Enterprise is contained in the Service Marketplace file.
Just wondering if you have experienced the same thing.
Best regards,
Steve

Invalid database schema for product hyperion reporting and analysis

I tried to re-configure the BI core service to a new database
But I get the message "invalid database schema for product hyperion reporting and analysis"
The database is a restore of a production backup on a different MSSQL2005 server.
I can not believe its really a sql schema matter.
Does anyone know whats wrong?

You cannot restore a BI+ database from backup...It is somewehere in the doc. There a re lots of references to the old server and config in the BI+ tables and you d need to edit/remove some files on the file server too. There is a doc available to do that but its far from simple.
Best way is to export the content of your repository, configure a new DB and then reimport the content.
If you re really stuck, drop me an email and ill send you that doc. I think ive still got it.
Seb
www.taysols.com.au
[email protected]

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

Configure Database is getting failed under Reporting and analysis in 11.1.2.3

Hi,
When I am trying to configure the database under Reporting and Analysis its getting failed and when I check the configtool.log it says
[2014-10-16T05:33:37.446-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01107] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Running file: C:\Oracle\Middleware\EPMSystem11R1\products\biplus\database\Common\postInit.sql
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONTAINER SET CREATION_DATE = null, LAST_MODIFIED_DATE = null where CREATION_DATE is null
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONTAINER SET CREATION_DATE = null, LAST_MODIFIED_DATE = null where CREATION_DATE is null
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONT_VERSION set CREATION_DATE = null WHERE CREATION_DATE is null
[2014-10-16T05:33:37.461-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONT_VERSION set CREATION_DATE = null WHERE CREATION_DATE is null
[2014-10-16T05:33:37.477-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] trace: UPDATE V8_CONT_VERSION set LAST_MODIFIED_DATE = null WHERE LAST_MODIFIED_DATE is null
[2014-10-16T05:33:37.477-04:00] [EPMCFG] [TRACE] [EPMCFG-01102] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Execute SQL: UPDATE V8_CONT_VERSION set LAST_MODIFIED_DATE = null WHERE LAST_MODIFIED_DATE is null
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01104] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] postInit.sql Processed (3) Success (3) Errors (0)
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07558] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponent(com.hyperion.hit.registry.ComponentType)("RA_FRAMEWORK")
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponent(com.hyperion.hit.registry.ComponentType)("64711b2385581a47S60706d4c148f4212621S7cb4") : Returned RA_FRAMEWORK
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getChildren(com.hyperion.hit.registry.Component,com.hyperion.hit.registry.ComponentType)("RA_FRAMEWORK/64711b2385581a47S60706d4c148f4212621S7cb4,DATABASE_CONN") : Returned 1
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] trace: This is not datasource db component. Doing clean up now.
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01110] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] remove old link only
[2014-10-16T05:33:37.493-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Removing link from RA_FRAMEWORK ( 64711b2385581a47S60706d4c148f4212621S7cb4 ) to DATABASE_CONN (64711b2385581a47S615148421490d7dbbddS77a8)
[2014-10-16T05:33:37.508-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01112] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Create new database component and link it
[2014-10-16T05:33:37.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Storage.getComponents(com.hyperion.hit.registry.ComponentType)(DATABASE_CONN)
[2014-10-16T05:33:37.508-04:00] [EPMCFG] [TRACE] [EPMCFG-07561] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Called : Storage.getComponents(com.hyperion.hit.registry.ComponentType)("DATABASE_CONN") : Returned 10 component(s)
[2014-10-16T05:33:37.571-04:00] [EPMCFG] [TRACE] [EPMCFG-05955] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.document.Storage] Setting link. Parent: id [RA_FRAMEWORK/64711b2385581a47S60706d4c148f4212621S7cb4], componnet type [RA_FRAMEWORK]. Child: id [customURL:HRA/64711b2385581a47S615148421490d7dbbddS77a8], component type [DATABASE_CONN]
[2014-10-16T05:33:37.602-04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 20] [ecid: 0000K^OJPaCCslW5Pz_Aid1KFt1l000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
com.hyperion.cis.config.ProcessingException: Failed to configure HPSU component: {0}, {1}
at com.oracle.reportinganalysis.config.RADBConfigurator.configure(RADBConfigurator.java:57)
at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
at java.lang.Thread.run(Thread.java:662)
All the required tables got created the Schema(SchemaName: HRA) but still the database configuration is getting failed.
All Other hyperion products got successfully configured.
Regards,
VJ.

Hi Nowshad,
Thanks for your reply.
I have did that couple of time but still getting the same above message. I have also followed the below document from metalink but still no luck.
Reporting And Analysis Configuration with New Database Fails (Doc ID 1482499.1)
I am not sure what I am missing.
Regards,
Vijaya Krishna.

Reporting and Analysis server down need to move to another server

I lost my original server for RA and re-installed the components on another server, however, when I try to access from workspace, I receive the message *"Could not find a Hyperion Reporting and analysis server running on "old server name' at port 6800. Please veriify your server connect string and confirm the server is set up".*
I've re-run the installer and configuration to no avail. Is there a configuration file that I have to update someplace?

This basically means that the HSS registry is still pointing to the old server name for RA_FRAMEWORK component.You will have to check through the registry report whether there are multiple instance of RA framework registered (one with the old server and another with the new server).If yes you can delete the old one from registry through the epmsys_registry command tool and reconfigure with the new server.
If you want assistance with the same,please raise an SR with Oracle support and should be able to guide you through.

Unable to register Hyperion Reporting and Analysis with Shared Services

Hello everybody,
I'm trying to install and configure Foundation Services in order to schedule Brio Query documents execution and distribution.
IBM DB2 Express has been installed and configured.
Shared Services have been installed and configured.
Reporting and Analysis - System 9 Services have been installed and not yet configured.
Reporting and Analysis - System 9 UI Services have been installed and not yet configured.
When proceeding with Hyperion Reporting and Analysis configuration in registering with Shared Services, provided with the same host, port, user profile and password used for configuring Shared Services, I get the following message:
"An unknown CSS error occured.
Please check that the information entered is correct."
Messages from configtool.log file:
"(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Getting CSS instance
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, URL for CSS.xml = https://itblq001.wincor-nixdorf.com:58080/interop/framework/getCSSConfigFile
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Authenticate LStoppa user to CSS.
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = LStoppa"
I can't understand what's happening. May you help me?
Thank you for every hints.
Regards
Lucia

The service runs until I try to confirm the registration while configuring HRA. Then it stops.
Apologies for the simple question, as I am trying to make the whole Hyperion System 9 running with little knowledge of it: how do I log to shared services?
Thanks

Exception when connecting to Reporting and Analysis services from Java API

Hello,
I'm trying to connect to Hyperion Reporting and Analysis services from Java API using [Developer's guide|http://www.bidw.in/docs/hs_developer.pdf] .
I get this error:
com.sqribe.rm.ReportMartException: com/hyperion/css/CSSException
     at com.sqribe.rm.SessionImpl.convertError(Unknown Source)
     at com.sqribe.rm.AASessionImpl.open(Unknown Source)
     at com.sqribe.rm.AASessionImpl.internalInit(Unknown Source)
     at com.sqribe.rm.AASessionImpl.<init>(Unknown Source)
     at com.sqribe.rm.SessionFactory.getInstance(Unknown Source)
     ...My code:
String user = "user";
String pwd = "password";
String host = "my.hyperion.server";
int port = 6800;
try {
     Session theSession = SessionFactory.getInstance(user, pwd, host, port);
     Repository theRepository = theSession.getRepository();
} catch (UserValidationException e) {
     e.printStackTrace();
} catch (UnknownReportMartException e) {
     e.printStackTrace();
} catch (ReportMartException e) {
     e.printStackTrace();
}I have tried to look at my services running, and it all looks OK. I've checked user/passowrd/port for GSM. What can be wrong?
I also tried to run samples from \BIPlus\SDK\samples\java, e.g. Login.java:
#> java Login user password my.hyperion.server 6800with this effect
com.sqribe.rm.ReportMartException: SystemExceptionError
        at com.sqribe.rm.SessionImpl.convertError(Unknown Source)
        at com.sqribe.rm.AASessionImpl.open(Unknown Source)
        at com.sqribe.rm.AASessionImpl.internalInit(Unknown Source)
        at com.sqribe.rm.AASessionImpl.<init>(Unknown Source)
        at com.sqribe.rm.SessionFactory.getInstance(Unknown Source)
        at Login.<init>(Login.java:36)
        at Login.main(Login.java:69)I'm sure that I'm connecting to the server because when put wrong passowrd or user as input to Login class I get this:
com.sqribe.rm.ReportMartException: AUTHEN_CSSLoginFailed
        at com.sqribe.rm.SessionImpl.convertError(Unknown Source)
        at com.sqribe.rm.AASessionImpl.open(Unknown Source)
        at com.sqribe.rm.AASessionImpl.internalInit(Unknown Source)
        at com.sqribe.rm.AASessionImpl.<init>(Unknown Source)
        at com.sqribe.rm.SessionFactory.getInstance(Unknown Source)
        at Login.<init>(Login.java:36)
        at Login.main(Login.java:69)so it is there but something is wrong later. Any idea what?
Please help.
regards,
Pawel
Edited by: Paoro on 2010-09-27 02:02

HI,
I am getting the same error while running the Login file, Did any one resolve this issue?
Please share the solution.
Thanks.

Attrition Report and Analysis

Hi All,
I am new to HRMS. I have a Requirement to build Attrition Report and Analysis a report. How many joinees,resinees,transferout,transfer in and redundnacies per month. The report should shoulddispaly month wise.
How to build this report. If any one worked similar requirement. Please guide me or post details.

Dear Vignesh,
Thanks for your prompt replay, I tried but i didn't get the details exactly. My report should display like below.
                    JAN     FEB     MAR     APR     MAY     JUN     JUL     AUG     SEP     OCT     NOV     DEC
Staff              103      104     104          105     107     107     115
Joinees          1                    1            2                    8
Resigness                    1                    6          1                    2
Transfer in
Transferout
Redundancies
Please give me idea through sql is it possible.

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

The password is set on the WiFi router providing the service, by the owner of the network to prevent unwanted "guests" accessing the network. The only way to know it is to ask the owner permission to use the network. Otherwise, you have to find a free WiFi hotspot that doesn't require a password.

Zip files required for Reporting and Analysis

Similar Messages

Maybe you are looking for