Zipeg and limewire no longer functioning (both bounced back).

Greetings,
Zipeg and limewire are no longer functioning on my mac (limewire first, about 3 weeks ago). In fact, i've tried to re-downloaded both softwares but the applications will only bounce back and not functioning. Previously (2 months ago), i have a same problem with MacDJView. Any idea what's wrong with my mac?
Any help will be greatly appreciated. Thanks!!

Hello n_n:
Some programs will not run if they are located outside of the "/Applications" directory on the
boot volume. I have Zipeg, but I don't have the other programs you use, so I don't know
if they will run on your second partition. My Zipeg install is on my boot drive, I've never
tried to run it on my data partition. I, like you, do have programs located on a second partition,
and every now and then I try to install one there and it will refuse to run, if it does refuse to run,
I go ahead and install it on the boot volume, however the majority of apps don't care where they
are installed.
Did you just install these apps or have they been working and just decided to quit?
Kj

Similar Messages

HT4623 Following our first use of FaceTime after updating our iPhone 4s, our App Store went blank and is no longer functional. How can this be rectified? Thanks.

We used Face Time last night for the first time after updating our phones recently to IOS 6; then discovered our App Store is empty of all apps and is no longer functional. How can this be fixed?
Thanks

We used Face Time last night for the first time after updating our phones recently to IOS 6; then discovered our App Store is empty of all apps and is no longer functional. How can this be fixed?
Thanks

I have a new mac book pro and and older MAC desktop. Both are backing up to my time capsule but it is close to full (1TB). If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers?

I have a new mac book pro and and older MAC desktop. Both are backing up to my time capsule but it is close to full (1TB). If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers? If so how do I do this? Thanks in advance.

If you add another Time Capsule, you can have one or both Macs backup to that new device.
However, please note that it is not possible to have backups "carry over" seamlessly from one Time Capsule to another.
If you add a new Time Capsule, each Mac that is backing up to the new device will make a new complete backup and then backup incrementally after the master backup is completed.

I updated to F.F.6 and I no longer can use my back or forword buttons?

I can no longer use my forward/back button after updating to F.F.6 it worked fine before doing this. Please Help! Thank You

Thanks for replying so soon,
Got rid of McAfee about a year ago and double checked for SiteAdvisor and found nothing, also do not use Yahoo Toolbar.
I also checked all my extensions which is not many and after going to F.F.6 almost everyone was disabled because it says they are not compatable I disabled the other 2 and rebooted F.F. and no change. I tried right clicking to go back and even held it down but it would not do anything? Any more ideas? Thanks for all your help!

After windows 10 upgrade, live tv, etc and remote no longer functions

After win 10 upgrade the live tv/media, etc no longer avaiable. Remote no longer works, Power go doesn't work. unable to even find programs that were part of original win 7 install

Download and install AMD drivers sp71903.exe from HP. It will say there is a newer driver installed, uninstall that one and replace with sp71903.exe.

I reset my toolbars and now no longer see the "page back" or "page forward" icons on the top left corner of the screen

just loaded the new version of firefox. i went into "library" and told the computer to forget the mp3tube toolbar and it got rid of all the toolbars and also shows no search engine in new tabs, and has no page back or page forward arrows in top left corner of screen. how do i at least get the page back and forward function enabled?

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

How do I daisy chain two time capsules as a wired router and use the hard of both as back-up?

I have a newer time capsule tower and an older time capsule that I wasn't using. The older TC works fine I just decided to upgrade about 6 months ago. I decided to run an Ethernet cable from the room where the TC tower is to the room where the TV in order to create a wired connection to the TC tower. I wanted to use my Apple TV with a wired. In addition, I am in the process of buying a Channel Master DVR plus and besides wanting to use it with older TC wired also wanted to use the older TC’s hard drive to extend the recording time of the DVR. Will this work? If so, my questions are related to setup of all. I assuming I plug the Ethernet cable into the LAN port of the TC tower and the other end into the WAN port of the older TC. Is this correct? What settings do I need on the TC tower and the older TC to make this work as a wired connection? Do I need to turn off the wireless connection on the older TC? Will I just need to plug in the DVR into the older TC’s USB port to use its hard drive? Thanks for your assistance.

I assuming I plug the Ethernet cable into the LAN port of the TC tower and the other end into the WAN port of the older TC. Is this correct?
Yes
What settings do I need on the TC tower and the older TC to make this work as a wired connection?
The setup "wizard" will automatically provide the correct settings to the older TC to "extend a network using Ethernet" when you start from a factory default reset condition on the old TC.
Do I need to turn off the wireless connection on the older TC?
You can, but if the older TC is located some distance from the new TC, you might want to leave the wireless on to allow an "extended" network with more wireless coverage in the area near the old TC.
Will I just need to plug in the DVR into the older TC’s USB port to use its hard drive?
The USB port on the old TC (and new TC) will only support a normal computer hard drive.....not a DVR. If you want to connect a hard drive for more recording capacity, you will likely need to use a separate USB or SATA hard drive that is connected directly to the DVR, not to the old TC.
Check the documentation on the DVR to confirm how that device should be set up.

Siri no longer functions with ios 6.1

I have an iphone4s that I just upgraded the IOS from 6.01 to 6.1 and Siri no longer functions. It just freezes at "what can I help you with" and never does anything or it indicates by voice that there is a problem. Cell WIFI and local WIFI are functioning normally.

I just figured it out, I went into settings and turned Siri off and back on and it seemed to trigger it into working.

HT201272 I had to reinstall windows 7 on my computer and never backed up iTunes on a external drive. Two things, first, I have all my music on my iPod (which a lot of it was on cd's that I no longer own),if I back up my iPod to iTunes will I lose all that

I have all my music on my iPod ( which includes music from all my cd's that I bought from retail stores and I no longer have), if I back it up to ITunes will I lose it even though it is in iCloud ?
Also, I can not find any of my audio books that I bought and downloaded thru iTunes, why?

For music purchased from iTunes you might be able to re-download it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
For music copied from CDs, and for purchases if you can't redownload them, then there are some programs listed half-way down this page which should be able to copy them back from your iPod : https://discussions.apple.com/docs/DOC-3991
There is also this page for syncing to a new computer (which, in effect, you will be) : https://discussions.apple.com/docs/DOC-3141
Where are you looking for the audiobooks ? They are currently a one-time only download from the store, so they won't appear in the Purchased tab for redownloading. If you don't have them on a backup nor on your iPod (if they are on your iPod then File > Devices > Transfer Purchases should copy them back to your computer's iTunes), then if they are still in the store then you can try contacting iTunes Support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Unexplained bounce backs from Ironport

We have a C10 device and last week we receved instanct bounce backs from the Ironport when trying to send to several different external email addresses at different domains.
The bounce backs were being generated by our internal Ironport itself instead of the destination email server so it is as if the email never left our company.
After serval days and no configuration changes on the Ironport I sent several test emails to these external domains. They are being recevied okay without any problems. Can any one explain what is going on here and how the problem recitifed itself?
Thanks for your help!

What may be happening:
It could be that your mailserver(e.g. Exchange) handed the mail off to the Ironport appliance, who took responsibility for the message. Then, after any last outbound scanning and appending disclaimers, the Ironport appliance did a MX lookup to deliver the message and then upon trying to deliver the message to the appropriate destination, the Ironport MTA received a SMTP 5## error code.
Upon receiving the SMTP 5## error code, the Ironport appliance will consider this undeliverable to the destination and then turnaround and bounce it back to the original sender, which may be what you're observing.
Where to go from here:
It would be useful if you still have those bounce messages that were generated by the Ironport appliance. You can look up the original sender and intended recipient or subject line through the mail logs and find the corresponding timeframe when the Ironport MTA tried to establish a connection to the destination host. This will show up as an ICID event where the Ironport tried to connect to the destination host. I'm surprised that the bounce message didn't provide some info on the cause of the bounce.
References:
1. findevent is a good tool on the command line that you can use to search for messages.
How can I determine the disposition of a message using the mail logs?
http://tinyurl.com/jb7z4

I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

In Earthlink Webmail, the "check all" and "delete" button for deleting multiple messages no longer function (although they work in I explorer).

When using the webmail application for earthlink email, the "check all" option to select an entire page of messages at once no longer functions. Same problem with the "delete" buttons that are located at the top and bottom of the page with multiple messages. Consequently, the only way to delete a message is to open the message and delete it in that view -- extremely tedious if there are a lot of messages.
This is a recent change, in the last few days. Everything works fine in I explorer. Earthlink support suggested I start Firefox in safe mode and restore firefox default settings. I went through the process on the help page. It didn't help.
I'll provide the earthlink link, but it is my email page that is the problem.

Same here.
- select multiple mails with the SEARCH option (manually selecting seems to work fine)
- click the move button
- list of folders appears (witn account & cancel options that both still work)
- click on a folder
- mail flies to this folder (animated)
- list of folders remains visible
- the cancel button does NOT work
- the accounts button takes you back to the root "directory" of your accounts
- in my case "live" and "exchange"
- this screen is a dead end. Clicking on both the account names and the cancel button do not work
A complete restart fixes the problem

I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and cannot do this. What can be done to restore my original functionality?

I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and this no longer works. How could I restore the previous functionality? Is somethong wrong?

Hi Eustace.
Thanks for replying to my problem. After posting I noted the "More Like This" box on the right of the screen. The top topic was "Restore old dual screen functionality" and turned out to be the the same question with a surprising answer - in the "Mission Control" dialogue, NOT the "Displays" dialogue. There are five tick boxes at the top of the Mission Control screen and the last of them is "Displays have separate spaces" and this box was ticked through the loading of the Mavericks op. system (presumably). Unticking this box, as advised, restored the 'extended' mode and all is now well.
We live and learn!

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

Zipeg and limewire no longer functioning (both bounced back).

Similar Messages

Maybe you are looking for