Zipping sound when booting/starting/waking up on rMBP 13"

Hi,
Whenever I boot my retina macbook 13 inch up from sleep mode, or from when its completely turned off, there is a zipping sound in the upper right corner of the body of the machine. The sound comes from right underneath the power button.
This is actually my third replacement macbook pro, and I've never heard this sound on either of the two from before. 
The sound is quite similar to the optical disk drive revving up for operation on a non-retina macbook pro, but obviously there is no optical drive on the rMBP. It is very similar to the sound of zipping up a sweater very quickly, or the sound of zipping up the fly of a pair of pants (for us guys )
Could someone please tell me if this is normal? In all honesty, I don't want to go for a fourth macbook... I just want this to not affect how the machine will operate in the future.
Thank you

I figure it may be the fan revving up for use. But I don't know why it would make this kind of noise.
This is the sound that I'm hearing:
https://www.dropbox.com/s/mrsxs8n23whywlh/Voice00002.3gp
(It is the sound at 5~6 seconds)
Could I get some thoughts from everyone? Thanks!

Similar Messages

  • Macbook pro late 2013, strange sound when booting

    My 3 days old macbook pro keeps strange sound when booting, it lasts like one second, and it reminds me of a cd drive trying to read cd, but here's no even the cd drive. what could be going on inside my mac, and should i take this to repair? the sound only comes when booting, not after boot, or when using.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    Best.

  • Continious beeping sound when booting up Satellite L350-235

    Hi everyone,
    I have an issue on one of our Toshiba's. it gives me now a Continious beeping sound when booting up the machine after giving in the bootpw.
    If i remove the battery and plug it back in it boots normally. But After the next reboot the problem occurs again.
    Any idea?
    Wim Bolanger

    Hi WimB_1,
    > it gives me now a Continious beeping sound when booting up the machine
    That means your hardware is malfunctioning and something must be repaired or exchanged.
    So in my opinion you should contact an authorized service provider. The guys can check your notebook and repair it. If your notebook is under warranty, the repair is for free.
    Here you can find a list of them:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
    Good luck! :)

  • Why do I get an interminable siren sound when I start FF?

    I'm using FF 3.6.3. I get an interminable siren sound when FF Starts. I can't get it to stop unless I go to Control Panel and turn sound to MUTE. This is unacceptable behavior for FF. Is there anything I can do to get it to stop?
    == This happened ==
    Every time Firefox opened
    == Today

    You can update Cool Previews to the latest version.
    See https://addons.mozilla.org/firefox/addon/2207/
    See also [tiki-view_forum_thread.php?locale=en-US&comments_parentId=678288&forumId=1]

  • How to turn off sound when iMac starts up

    how to turn off or turn down sound when my imac starts up

    debrafromusa,
    This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to  boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
    Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

  • Metallic scraping sound when booting Mac mini

    Hi,
    I just bought a Mac mini last week, and I've noticed that when I start it up, there's a sequence of two metallic scraping sounds coming out it when I start it up. I'm guessing that it's some part of the optical drive mechanism checking to see if a disc is inserted (there isn't a disc in the drive), but the noise is much louder than I've experienced when booting any other Mac or Windows machine that I've used. Is this normal, or is this something that needs investigation? If it matters, I have Boot Camp installed, so Snow Leopard is on one partition of the hard drive, and Windows Vista is on the other. The sound occurs regardless of which partition is set to be the boot partition.
    Thanks,
    Ken

    Hi,
    Thanks for the info. I confirmed at one of the Apple Stores near me that the sound is exactly as you described it. I agree with you, this is the noisiest optical drive that I've ever heard, significantly louder than the sound that an empty floppy drive makes when booting a Windows machine.
    Thanks again,
    Ken

  • Weird sound when booting and restarting Mac

    Hi,
    Since a week or 2 (that i've noticed) the superdrive makes a somewhat weird noise when restarting or booting the Mac. The usual sound, that i'm sure needs no description or explanation, is now accompanied by a higher pitched "jamming" sound.
    The SuperDrive Update 3.0 won't run on this Mac and there are no firmware updates available.
    I am confident i did not have this sound before 10.6.2 but i am not sure when it started after the 10.6.2 update.
    It reads/writes any disc i put in there just fine and the sound does NOT happen when i take the Mac out of sleep mode, then it gives the normal sound it always has given. Also when inserting/ejecting a disc the sound is normal.
    Any idea's or suggestions?
    It's a MBP 17" Early 2008.
    Any help greatly appreciated
    Jay

    Anyone ?

  • [solved] no sound when booting with webcam attached

    Hi everybody,
    hopefully this is the right section to post since I'm not quite sure if the problem is related to KDE or a general hardware thing. ;-)
    Anyway, the problem that I have is that I don't have any sound at all when booting my system while my webcam, a logitech 9000 pro, is attached to the USB port.
    Even when unplugging the webcam afterwards the sound does not work. I need to reboot my system first with the webcam detached and than it'll work again. I also did already manually insert the modules in /etc/rc.conf but no change. Every time it seems that the webcams audio interface will be recognized as the primary audio device.
    When not having the camera plugged in and plugging it in while KDE is up, everything works like a charm.
    But of course it bothers me quite big time to unplug the webcam every time after using it and rebooting the system again after I forgot to unplug it.
    I also checked for other modules to be loaded automatically (compared the output of lsmod before and after plugging in the webcam) but there was no change.
    So does anyone have an idea what to do in order to get the order of the audio devices right?
    Thank you!...
    Last edited by kurisutian (2009-11-23 19:34:10)

    In your /etc/rc.d/modprobe.d/modprobe.conf try to put zero index for your audio driver, so it will load first. In my case it's this line:
    options snd-hda-intel index=0

  • Rattling sound when computer starts

    Hi, I've been using HP 430 notebook and currently have Windows 8.1 pro (32 bit) installed. Recently I am having an issue and it concerns me a lot. When it starts up it makes a rattling sound for a couple of seconds and then its all gone. After start up everything is fine again. It doesn't happen evey time though. I've been using my pc for about 3 years and never needed any servicing or anything of that sort. Should I be worried (if not already!)? What might cause this and what needs to be done now? 

    Bappi wrote:
    Hi, I've been using HP 430 notebook and currently have Windows 8.1 pro (32 bit) installed. Recently I am having an issue and it concerns me a lot. When it starts up it makes a rattling sound for a couple of seconds and then its all gone. After start up everything is fine again. It doesn't happen evey time though. I've been using my pc for about 3 years and never needed any servicing or anything of that sort. Should I be worried (if not already!)? What might cause this and what needs to be done now? 
    No one is going to know this problem like that on here. You need to take it to a shop and have them see if first hand to know what might be the cause.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Sound when macbook starts

    can i turn off the sound that the macbook makes when you turn it on? the ping sound.

    Do you know how to search the forum?
    How do I read the manual? How do I type the "A"? How do I start my mac?
    http://discussions.apple.com/thread.jspa?messageID=6622888&#6622888
    http://discussions.apple.com/thread.jspa?messageID=6522847&#6522847
    Cheers Eddie

  • Macbook Pro weird sound when booted up

    Everytime I startup or boot up out of sleep my computer makes a weird sound as if its loading a cd.
    It sounds like it tries to load a cd 4 times.

    Ummmmm... the computer was dropped and now makes noises? That's not normal. Have you tried to insert a dvd or cd into the optcal drive to see if it still works? Sounds to me like you'll be making a trip to the Apple store....but don't expect that they're going to warranty anything....they'll know it was dropped.

  • Laptop speakers make a squeeky sound when it starts playing audio

    Whenever my laptops makes a sound and it hasn't made a sound in a while i hear a little squeek before the audio start, I'm using a DV6-3020ED. I think i read before about this problem but i cant find anymore information at the moment. Please help...

    > Is the file normalized correctly?
    Please don't tell me that any form of "normalization" was used at all!!
    Such a bad idea.
    Things to look for.
    1 - Why the 448 bitrate? You're legal as far as it goes, but I would like to know why.
    2 - What Dolby Digital Encoder did you use - it wasn't Encore. Was it a properly licensed one?
    3 - What is the peak level of the original PCM file? Should *not* be more than -6dB at the hottest (depending on destination)
    4 - If the file was close to 0dBFS peak, was the RF overmodulation protection set to ON or OFF?
    5 - Where in the file is this click? Beginning? End? In the middle?
    If at the beginning, have you made certain that the 2 second audioblack is there? Is the file faded in properly? Slow decoders can cause a click by taking time locking down on a stream.

  • Buzzing sound when computer starts or wakes up

    Hi Guys,
    completed my first build a couple weeks ago and everything going well so far. 
    There is a small annoyance however.  Whenever the computer boots up or wakes up, there is a static sound coming from my speakers plugged into the case headphones ...

    You can make your own recovery media, it wont be the same as the original from MSI, but all you would need to do is download the drivers and utilities.
    windows.microsoft.com/en-GB/windows-8/create-reset-refresh-media

  • No Sound When Pismo Starts

    My Pismo PowerBook stopped making the ping sound Macs are known for after I push the button to boot up. Any ideas why this is happening? Thanks

    Hi
    These are a couple of terribly simple suggestions, but sometimes the most obvious things are what we tend to overlook:
    Have you tried to hear any other sounds from your Pismo's speakers,, such as Music, alarms, voice messages?
    If there is no sound from the speakers on any action, it is possible that the mute button (just to the right of the Numerals Cap is activated).
    If the volume is turned on, yet you hear no sound on music or any other function, your sound card probably needs replacing.
    PB

  • No sound when PC boots

    Hi all , could anyone give us an idea on whats happening here, for some strange reason my PC doesnt play the boot-up sound when booted and shutdown also when browsing the net i used to hear a click when pages changed,also new hardware plugged in out etc.But no sound.I can play music and hear it OK, skype boots and the start up sound is herd and the shut down sound, all volumes and indications in the sound set-up are correct as far as i know but this one is bugging......Please help...!!
    .....operating on windows vista home premium x32 HP PAVILION A6525.uk

    Hi cwrighty,
    The good news is it sounds like your hardware and software are functioning correctly. What has likely happened is your "Sound Themes" changed. You can customize what sounds play and when. Here is an article from Microsoft that explains how: http://windows.microsoft.com/en-us/windows-vista/C​hange-computer-sounds
    Let us know how it goes.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Maybe you are looking for

  • SVG in pdf created with FOP

    Hello, is it possible to include SVG`s to a pdf report, which is created with FOP? I read something like Batik.... Does anybody have any experiences about that? Thanks, Tim

  • Oracle 10g :: APEX not running

    Hi, I have installed Oracle 10g in my pc with the default configuration. First day of installation APEX client was running but now its not running. Server is running correctly as I saw server processes in the Process Manager (Task Manager). I am usin

  • Mail Disappeared After Shut Down

    A retired friend bought a new 21.5 inch iMac 5 months ago and twice in the past week his mail has completely disappeared. Fortunately, there is a TM backup and I have used that once to restore everything for him. The first event also took away all Ad

  • Where is Insert key

    What keys are the pc equivalent of Insert on a MacBook Pro running Mountain Lion? Or how do I programme a shortcut to create a key please?

  • XML Driven

    Hello World, I'm interested in a photo stack gallery. Here is an example: http://www.flashdevelopment.de/CONTENTS/3DPHOTOSTACKGALLERY02/3dphotostackgallery02.php I want to use a photo stack gallery on my multiple affiliate websites to display my prod