Zipping the payload using File adapter

Hi Experts,
I have a 620 MB xml file, which need to be archived on daily basis.
but the XI server shows 503 service unavailable message, while trying to process the huge file.
also used the Zippayloadbean module in the file adapter, but no luck.
Please suggest on how to archive 620 MB xml file.
Thanks in advance.

Hi mk,
I know that there is a bean for the adapter module that unzips attachments. Have a look if there is a module for zipping.
Zip or Unzip your Payload with the new PayloadZipBean module of the XI Adapter Framework
/people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
and check the CASE 2 in this blog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Regards Mario

Similar Messages

  • Wrting zip Data using File adapter

    Did any one tried or implemented writing zip/gz file using File adapter.
    I know how to write opaque data using Base64Binary. But i am not getting on how to use file adapter for writing zip file.
    Any help / suggestions are greatly appreciated.
    Thanks !!

    Thanks for the reply, have been using opaque for a while now and know the read & write for that.
    My problem is i am not able to get how i can write compressed data , writing binary data is fine i can use string->encode->base64binary->opaque and can write that.
    But that will not be the compressed form.
    Thanks !!

  • Is it possible to read the file using File Adapter which is in client machi

    Is it possible to read the file using file Adapter which is in client machine(on the same network).Then what is thee need of FTP Adapter?

    You can achieve that by exposing your client machine as a drive, then you can go using file adapter.
    FTP adapter will help you to communicate with different machine which is in different network.
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Thanks,
    Vijay

  • How to get the read input file name in bpel process using File Adapter.

    Hi,
    I am reading a .txt file from configured directory using File Adapter.
    I had configured file adapter to read file with naming pattern “SalesOrder.*\.txt”.
    Now I had requirement to access the actual file name in bpel process eg: “SalesOrder123.txt”
    How can I get the file name in bpel process.
    Any help is appreciated.
    Vidya.

    1) create a variable of message type. Click on Browse Message type. Here you select Message Type-->Project WSDL Files -->fileAdapterInboundHeader-->Message Types-->Inboundheader_msg. Then click OK
    2)Next dbl Click on teh receive Activity which is receing your File from teh File Adapter. Go to the Adapter Tab. Click on Browse variable and select the variable that you had just created above.
    This would get the File name in the variable declared

  • Remove Line feed at the end of the file while using file adapter

    Hi All,
    I have a requirement. We are sending a file from SAP to FTP using file adapter. we are successful in sending the file to FTP but at the end of the file a extra blank line is created .
    Can anyone please suggest how to remove the extra line feed at the end of the file.
    Thanks and Regards,
    LRK.

    check this:
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
    To define an additional string as a separator after the last column in a row, specify it here. The system skips this string when it processes the last column (otherwise the system would treat it as part of the last column).
    Also there are solved threads which deal with same problem....you can even check them out...
    regards,
    Abhishek.

  • How to get file name using File adapter Sync read

    Hi All,
    I am using SOA 10.1.3.3 and JDEV 10.1.3.3.
    I have an async bpel process.
    I have to read file name in this process... so i have used file adapter sync read operation.
    How can we get the file name with out payload using sync read.
    For normal read (Inbound Spec)we have UseHeaders="true" property.
    Is there any property for sync read to read the file name.
    Please help me
    Regards
    PavanKumar.M
    Edited by: [email protected] on Oct 27, 2009 11:23 PM

    Hi Eric,
    The info in the link provided by you is for a normal read.
    I need to read he file name using Sync read operation.
    Regards
    PavanKumar.M

  • Unable to read File using File Adapter

    Hi,
    I am using File adapter to read XML file.
    I able to write payload contents to file. but using same schema, path i am unable to read the file.
    receive process is not initiating.
    what could be the possible issue?
    Thanks

    Could you please give more info about the configuration, like the spring file entries? Do you see any errors in the server log? Thanks.

  • Not able to map contents of xml to output using file adapter

    Hi
    i m not able to map the output of file adapter to a variable when reading an xml. the data is coming in the file adapter output variable but it is not mapping to other variable in assign or transform activity.I m using jdeveloper 11.1.1.4.0.Can anbody help me plz.
    Regards
    Sourbh

    i am using file adapter as reference to synchronously read an xml file. i am able to see the flow trace in em console. the output variable of file adapter contains the data but when i m trying to assign the value to a variable i getting error. saying that some xpath is not returing any value.
    i tried with transform activity also but same case is there.

  • Using file adapter, got "Sender Agreement not found" error

    I used file adapter in my CC and defined all the necessary objects. When I tried to test the configuration and I kept getting "Sender Agreement" error.
    Also the chache is cleared too, searched the forum already, couldn't find any clue
    Not sure what I did wrong

    Hi,
    First things first, ensure you have an agreement for each single Communication Channel you have
    and that they are correctly associated.
    If they are created and associated, you may try the cache refresh with the link:
    http://host:j2eeport/CPACache/refresh?mode=full
    Kind regards,
    Caio Cagnani

  • Appending in file and supplying file name at run time using File Adapter

    Hi,
    Can we use File Adapter to write in a file in append mode. i.e. a BPEL process opening a file appending some text and closing the file each time it called.
    Another query is can we create the file at run time with the supplied file name?

    In order to append to a file, we can use Append="true" in the interaction spec for the File/Ftp adapter.
    <jca:operation
    FileType="ascii"
    PhysicalDirectory="/home/adapter/output"
    FileNamingConvention="OutputFile.txt"
    NumberMessages="1"
    Append="true"
    >
    Filename we can specify in wsdl...

  • Error while trying to move file using File adapter

    Hi, I am trying one scenario to move file from one remote folder to other using file adapter as mentioned in heading 4.5.11.1 at http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10231/adptr_file.htm#CHDGFAAB. But I am receiving the below error:
    <messages><input>
    <Invoke1_FileMove_InputVariable><part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/opaque/"/></part></Invoke1_FileMove_InputVariable></input><fault>
    <bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "*JCA Binding execute of Reference operation 'FileMove' failed due to: Exception occured when binding was invoked.*
    *Exception occured during invocation of JCA binding: "*Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: Cannot set JCA WSDL Property.**
    **Error while setting JCA WSDL Property.**
    **Property setSourcePhysicalDirectory is not defined for oracle.tip.adapter.file.outbound.FileReadInteractionSpec**
    **Please verify the spelling of the property.**
    The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution.
    The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution.
    </summary></part><part name="detail"><detail>Cannot set JCA WSDL Property.
    Error while setting JCA WSDL Property.
    Property setSourcePhysicalDirectory is not defined for oracle.tip.adapter.file.outbound.FileReadInteractionSpec
    Please verify the spelling of the property.
    </detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault></fault><faultType>
    <message>0</message></faultType></messages>
    Please provide any insight if someone have tried this.
    Thanks,
    rps

    Hi rps,
    Your interaction-spec className seems to be incorrect (FileReadInteractionSpec).
        <interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">
        </interaction-spec>Please try with the above interaction spec and let me know the outcome.
    Regards,
    Neeraj Sehgal

  • "encoding = UTF-8" missing while writing XML file using file Adapter

    Hi,
    We are facing an unique problem writing xml file using file adapter. The file is coming without the encoding part in the header of xml. An excerpt of the file that is getting generated:
    <?xml version="1.0" ?>
    <customerSet>
    <user>
    <externalID>51017</externalID>
    <userInfo>
    <employeeID>51017</employeeID>
    <employeeType>Contractor</employeeType>
    <userName/>
    <firstName>Gail</firstName>
    <lastName>Mikasa</lastName>
    <email>[email protected]</email>
    <costCenter>8506</costCenter>
    <departmentCode/>
    <departmentName>1200 Corp IT Exec 8506</departmentName>
    <businessUnit>1200</businessUnit>
    <jobTitle>HR Analyst 4</jobTitle>
    <managerID>49541</managerID>
    <division>290</division>
    <companyName>HQ-Milpitas, US</companyName>
    <workphone>
    <number/>
    </workphone>
    <mobilePhone>
    <number/>
    </customerSet>
    </user>
    So if you see the header the "encoding=UTF-8" is missing after "version-1.0".
    Do we need to configure any properties in File Adapter?? Or is it the standard way of rendering by the adapter.
    Please advice.
    Thanks in advance!!!

    System.out.println(nodeList.item(0).getFirstChild().getNodeValue());

  • How to read MS-Excel file by using file Adapter

    hi friends,
    I have an issue on read Operation by using file Adapter.
    It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
    So friends, please help me how to solve this problem?
    Thanks in Advance..

    See also this post:
    Read Excel File Using FileAdapter in SOA 11g
    It might help you

  • Get File name using File Adapter

    Does anyone know how to get the file name that has been picked up so it can be past to a variable so it can be used in the BPEL process.
    cheers
    James

    Hi James,
    Here the STEPS,
    Create File Adapter.
    Add File Adapter Service to Receive Activity.
    Click Receive Activity and goto Adapters Tab.
    Click "Tourch" to get variable names.
    Select Variable -> Process -> Variables and Click on "Create New Variable" icon and give name.
    Select "Message Type" and click "Tourch" icon.
    Now you select "Partner Links" -> FileAdapter WSDL -> Imported WSDL -> Message Type -> InboundHeader_msg and select OK.
    It's done.
    now you can use this Global Variable to get Filename and Directory name.
    Regards,
    Bhavesh Thaker.

  • Two Files merging using File adapter in Bpel 2.0

    Hi All,
    I have two different files (File 1 and 2) of same format(Two columns each)  , now i want to merge these two files using their data and form a consolidated file (File 3 with four columns).
    Please advise on how to make it possible using file adapter.
    Example:
    File 1 Format: A1 and A2 - are two columns of number and sring type
    File 2 Format : B1 and B2 - are two columns of number and string type
    Consolidated File 3 Format : A1 B1 A2 B2 - forming a single row if A1=B1 and also populating A2 and B2.
    Thanks
    Karthick.

    Hi Karthick,
    I would say read both files completely. Then create a transform and select both messages as an input creating one output. With XSLT it should not be too hard to combine the two inputs. You could loop on one file and then select each row from the other file. That output can be written to file.
    I don't know what triggers the process, but you could either let bpel be triggered by the polling on one file and read the other synchronously. Or read both files synchronously.
    Regards,
    Martien

Maybe you are looking for