Zire 71 hotsync windows 7 32bit

Sorry to repeat this ageless thread but I am lost. I tried following the instructions previously posted by downloading Palm Desktop 6.2.2 and the pimlico, this failed to sync. Programs seemed to load ok but the hotsync stilled failed. It was suggested to do a clean uninstall of the palm desktop program files. However, the only instruction I can find are fro XP or Vista, nothing about Windows 7. Am I just not looking in the right place or is this so old I'm just SOL?
Any help would be greatly appreciated.
Carl
Post relates to: Zire 71

Palmblogging wrote:
Copy prc and pdb files in zipped folder to sd card and put sd in Zire then copy to main memory Works for most apps
Or just run the games from the card! Copy the .prc and/or .pdb files to this directory on the card:
/Palm/Launcher
If the folder doesn't exist, then create it using a Card Reader connected to your computer. Any SD card formatted in the Palm device itself will create the above folder, plus /AUDIO (for music files) and /DCIM (for pictures and videos).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Help syncing zire 31 with windows 7 via bluetooth

I am trying to sync my palm zire 31 to windows 7 via bluetooth. So, far no luck! i want to know if it is even posible with my zire? I recently purchased my zire via ebay. So, I have yet to hotsync! help me Please! And, is this the best way for me to try to hotsync in the first place? I have tried repeatedly to hotsync via usb.....but no luck!
Post relates to: Zire 31

The Zire31 does not have a BlueTooth radio in it... The method you are trying will not work.
There are no USB drivers in Vista64 or Win7 64 bit, so syncing via a cable is out too.
Your option is using IrDA (Beaming). Please read the large "Windows7 and Vista HotSync instructions here" thread for some guidance.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

ITunes 10.5 on Windows 7 (32bit) doesn't display the iTunes store

Hello there,
on my Windows 7 (32bit) system, already with iTunes 10.4 I encountered the problem that the iTunes store remained inaccessible - it simply wouldn't load/display. Problem was solved by removing all Apple software, cleaning up the registry, rebooting, reinstalling iTunes 10.4.1, and NOT installing Safari 5.x - because as soon as Safari got installed, the problem would reappear.
Now with iTunes 10.5, the problem is back. Only that this time it does not matter if Safari is installed or not - the store simply won't come up.
I've tried the whole support articles suggestions up and down - to no avail.
It's not a problem of firewall, antivirus, hosts file etc. - the diagnose function says clearly that even https is OK, all settings in the internet options are right, etc. etc. - I've spent days on that, and believe me, I'm sure about it.
The diagnose function says, however, than QuickTime would not be available. No matter if QuickTime IS installed or not, before or after iTunes 10.5 that says it would neither contain nor need QuickTime anymore.
After cleaning out all Apple software and its traces, a reboot, and a reinstallation of iTunes 10.4.1, the store is accessible again - only that iTunes 10.4.1 can't use my iPhone with iOS 5 on it.
So I'm either stuck with an iTunes that CAN access the store, but can NOT sync my iPhone, or with one that CAN syn my iPhone, but can NOT access the store.
Besides, with iTunes 10.5, the separately installed iCloud control panel app simply won't come up - I can click until I get blue in the face...
Obviously, for iCloud control panel, although it is only listed as "recommended", it seems it's actually "required" to have Outlook 2007 or 2010 - and I have Outlook 2003 and do NOT intend to switch to a higher MS Office package.
I got an appointment at the Apple Store nearby now for Wednesday noon - to revert my iPhone to iOS 4. Then I could at least go on using the iPhone until again the first apps won't support iOS 4 any longer, as it happened shortly after the launch of iOS 4 when iOS 3.1.3 wasn't supported any longer.
Oh, I forgot to mention - during the update/upgrade to iTunes 10.5 / iOS 5, the sync destroyed my recent backup and hung - the only way out was to kill the backup process and continue, which resulted in a "new", blank phone. Lost some years' app data and a lot of important bookmarks that way.
Needless to say that the iPhone was my last Apple product ...

Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P.

How can I login to Oracle Express Ed 11g Rel 2 on windows XP 32bit?

I installed Oracle Express Ed 11g Release 2 32bit on windows XP 32bit and I can not login ito it. Installation asked for a password to be created at installation which I used to login with.
The login window is started from a shortcut that installation created on my desktop. I tried to download and install three times. I went thru a SW removable before another download. The login responds with "Invalid Login Credentials"
I have admin rights to my PC. What could be the issue?
Please help.
Thanks.

What could be the issue? Could be many different causes. Mistyping the password is one, or the database could be offline but in most cases that will give a different error message. Open a command box, Start/Run/cmd and try:
$ sqlplus /nolog
connect system
... Password ... <the one used with the installer> ... Connected.
select name from v$database;
login window is started from a shortcut If you're talking about the Apex page, the one that opens a web browser to http://<hostname>:8080/apex and that one needs Apex credentials, not database user credentials. Apex users can be mapped to database users but that is something done via the apex administrator.
Two database accounts "out of the box" are SYS and SYSTEM users, those are special- SYS owns the catalog, SYSTEM is a user with dba role privileges, almost as powerful within the database as the SYS user.

Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
a
Main Circuit Board
b
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
c,d
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
(mouse over user name for details)
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection [Back to Top]
Group
Policies
Norton AntiVirus Version 18.1.0.37
 Virus Definitions Version Not Up To Date
 Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days(mouse
over last used for details)
Hosted Virtual Machines (mouse over
name for details)
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

Error when installing itunes version 9 on Windows Vista 32bit

When trying to install itunes version 9 an error has come up before the installation is complete.
The error reads -
An error occurred during the installation of assembly
'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
HRESULT.0x800736133
Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
Thanks

Thanks Emma!
Ox800736B3
Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

MICROSOFT vc80.crt TYPE WIN 32 - HRESULT: 0x80070422 - everytime i try to download itunes 10.5.2 on window 7 32bit? - why and how can I do to avoid it ?

hello
I am trying to install Itunes 10.5.2 to my laptop running window 7 (32bit)
I may have tried a zillion time and I am now running out of options.
-Uninstalled and reinstalled countless time
-Cleaned C drive of all Apple product countless time
-All window updates in and installed succesfully
I always get the same error messages, in the following orders during download
1)Itunes
an error occured during the installation of assembly ''Microsoft.vc80.crt.type=''win32'', version=''8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b'', processor architecture=''x86'', please refer to help and Support for more information. HResult: 0x80070422
2) itunes
Service 'apple mobile device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
3) ItunesHelper
Apple application Support was not found
Apple application support is required to run itunes helper- please uninstall itunes and then install itunes again - error 2
4)Itunes
Apple application support was not found.
AAS is equired to run Itunes. please uninstal itunes then install itunes again
error 2 (windows error 2)
thanks for your help if you know the answer.

Hi all, I know this is a very old thread, but I was battling this issue for awhile and wanted to provide my solution in case future users encounter a similar issue.
I am running Windows 8. I encountered this issue while trying to install iTunes 11.1 x64 version. After some troubleshooting, I discovered that the real issue was trying to install the Apple Mobile Device service.
My resolution was installing the Microsoft Visual C++ 2005 Redistributable Package. It is available from Microsoft. A search on Google should reveal it. However, here is the latest link that I used: https://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=14431
Note that redistributable packages for more recent versions of Visual C++ (eg 2008, 2010) will NOT work. Only 2005 version worked for me.
Good luck!

ERROR 1002 WHILE ROCOVERY DISK HP G60-441 US WINDOWS VISTA 32BIT

I HAVE HP G60-441US MODEL WITH WINDOWS VISTA 32BITS, PRODUCT NUMBER NW142UA. I TRY TO MAKE ROCOVERY DVD DISK WITH RECOVERY MANAGER BUT IT IS FIALED ON 2ND DVD. THEN I TRY TO RECOVERY WITH RECOVERY MANAGER IT SHOWS ME ERROR 1002 WHILE I PRESS OK ; COMPUTER IS RESTARTED AND BOOTMGR IS MISSING PRESS CLT+ALT+DEL FOR RESTART. AFTER THAT I CHECK HARD DRIVED MEMEROY IT IS ALSO FAILED. AND WHILE STATING COMPUTER IT SHOWS ME TO REPALCE BATTERY.
I DID ORDER RECOVERY DISK FROM HP SUPPORT AND REPLACEMENT BATTERY. IT TAKES ONE WEEK TO GET IT.
NOW I WANT TO KNOW THIS IS HARD DISK PROBLEM OR JUST SOFTWARE PROBLEM. I TRY TO DO FORMAT MY COMPUTER DUE TO BAD PROFORMANCE, TAKES TOO LONG TIME WHILE STARTING COMPUTER AND IT IS FIALED ON WINDOWS UPGARDING AND CONFIGURING.
THANKING YOU.

Hello kmdavis. I have read the issue you are experiencing. Your computer is experiencing a hardware failure, and you should contact HP technical support for further assistance. Their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine

Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine...
I tried to install driver on connecting PC, i tried to install printer as Local printer with local port - \\WIN7-32bit\HP PSC 1310 Series\ - and i got access denied, and before i reinstall Windows on 64Bit machine its worked correctly... anyone know how to solve this problem ?
*Edited*
When i connect it on 64 Bit machine printer requesting driver *.inf and not specific file...
i try to install 64bit driver on 32 bit machine in sharing options and they didn't support it...

More than likely, you are receiving the access denied error because there may not be a HomeGroup in place.
To handle networks securely with Windows 7, Microsoft took a different approach. A HomeGroup essentially creates a trust among all the devices in that home group. If a device is not in that homegroup, then that system will essentially be denied access.
Click on Install a printer on a home network to get basic steps to install a printer in a network environment.
Click on HomeGroup: recommended links to get more information about Home Groups, including setting one up.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Install CS2 on Windows 7 32bit and 64bit, please help!

I own a legitmate CS2 Creative Suite and my old Windows XP computer must be retired. Is there any way for a non-technical person like me to install CS2 on Windows 7 64bit? I saw some instructions but they seem geared to very computer knowledgable people and I got lost just reading them. Also, I saw new that CS2 was or is being offered fro FREE from Adobe? Is that true?
OR, will CS2 as a 32bit application be more easily installed on Windows 7 32bit without any special install instructions?
Thank to alll who can help this pathetically technically challenged person! I can NOT afford to upgrade CS2.

Option 2 here: http://forums.adobe.com/message/4715553 seems to work:
Copy the installer to your local drive. Right click Setup.exe, Properties > Compatibility tab > Run this in compatibility mode. Choose XP SP2. Click OK. Run Setup.exe
And yes, you can download and install them, see:
http://forums.adobe.com/message/4976177
There is still ongoing discussion whether anyone is entitled to install it, or only users with a valid license, but it seems Adobe does not care.

Cant re install icloud on Windows 7 32bit, transform path invalid

Hi everybody.
I have been trying to reinstall icloud on my Windows 7 32bit pc, but everytime i try to install i get this error:
'Error applying transforms. Verify that the specified transform paths are valid'
And then the installer shuts down.
Does anyone have a clue ?
Kind Regards
Kim

Same problem here. I was prompted to update iTunes and all the problems started. After installing and reinstalling 10 times, clean the registry, etc. and even deleted my iTunes library, I have realized that the problem comes when installing Apple Application Support. I get the message "Error applying transforms. Verify that the specified transform paths are valid" and there's no way to get over it. Last thing I have done is check Windows 7 integrity with the command SFC/SCANNOW and it says everything is ok with my windows 7.
This is not the first time I've got problems updating iTunes (will think twice before doing it again).

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??

Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??

Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Photoshop CS5 on Windows 7 32bit text tool issue

We are having an issue with 2 Windows 7 32bit machines running Design Premium CS5, when using the text tool in Photoshop it will randomly type multiple letters with 1 keystroke as if the key is being held down. To date it only appears to happen in Photoshop as other text tools and other text applications are not having this issue. All updates have been run on Windows as well as the Adobe products. Haven't been able to find any reference to such an issue on any support forums. Anyone experienced this issue and found a resolution? Thanks

Never seen that here...
Frankly, if you weren't seeing it on two separate systems I'd say it sounds like a hardware fault. Have you tried swapping keyboards?
Are these USB keyboards? Have you tried plugging them into a different port?
Do the users have any software running that augments the user interface in any way? Something both of them have in common?
Any possibility of malware?
Any possibility someone's plugged in one of those "irritant" devices available from ThinkGeek.com specifically designed to insert random characters from the keyboard?
Sorry these are only very general, generic thoughts.
-Noel

Installation Oracle 10g XE on Windows 7 32bit

Hi!
Is anyone try (with good results) to install Oracle 10g XE on Windows 7 32bit ?:)
Regards

Hi;
Please follow below and see its helpful for your issue:
Re: How I can to Install Oracle 10g in Windows 7?
How to install Oracle DB 10g on Windows 7?
Regard
Helios

Zire 71 hotsync windows 7 32bit

Similar Messages

Maybe you are looking for