Zire72 Data and BlueTooth HotSync

Recently formatted/restored my 1 yearold PC (Win7HomePremium on HP Pavilion) after 1 year successful hotsync with my Zire72. Reloaded Access 6.2 and tried to replace my data in Access but couldn't make it work. Also, unable to hot sync via bluetooth as before. Unit connects and begins, gets to stage 2 (calendar) of 13 and just hangs. Have read your old posts so let it operate for over 30 minutes and no change. Had to use task manager to shut down. BTW, have uninstalled/reinstalled Access 6.2 but no change. Any ideas or other thoughts greatly appreciated. Thanks!
Post relates to: Zire 72
This question was solved.
View Solution.

DBFixit2 also "fixed" the DMwrite fatal error/removed it, but anyway, now able to sync without the hangups. Good investment of $12.95...and it looks like they even have technical support for the product and the Palm process.
http://www.pimlicosoftware.com/support.htm
Thanks for all the comments and support on the forum, too...happy trails

Similar Messages

  • Windows 7, 64 Bit, Bluetooth Hotsync, Desktop 6.2.2 by Access

    Windows 7, 64 Bit, Bluetooth Hotsync, Desktop 6.2.2 by Access
    I have had problems of hotsyncing my Palm T3 to my windows 7, 64 bit, laptop ever since I bought the laptop.
    I've read many posts and followed various instructions to no avail.
    But, I've discovered a way that works every time.
    As I stated above I have a Palm T3 with built in bluetooth. My laptop is an HP DV7, operating with Windows 7 Professional, 64 bit.
    I am using Palm Desktop Version 6.2.2 by Access on my laptop, of which cannot be hotsynced using a USB connection.
    I installed an I/O Gear, brandname, bluetooth adapter on my laptop, I bought from Walmart. A very nice micro size adapter.
    I established a BT to Laptop PC connection on my T3, and use it instead of the standard Cradle/Cable connection option that was already established on the T3 from the factory.
    Make sure your bluetooth is turned on, on both the computer and your Palm device.
    Make sure both your computer and Palm device are discoverable and connectable.
    Make sure the Hotsync icon is displayed in the taskbar at the lower right corner of your desktop on you computer.
    Now you should be setup to sync both devices by bluetooth connection, right?   Wrong.
    Here's the trick!
    Connect your Palm device with your computer using your Palm charging cable connected between your Palm device and into a USB port on your computer. This will pair your device with your computer and bluetooth hotsync will begin immediately after you tap on the hotsync button on your Palm device.
    It works for me.
    Hope it works for you.
    Best wishes
    GW2B
    Post relates to: Tungsten T3

    In PD 6.2.2 there is a PIM conduit switcher. Have you tried this?
    Another option I can think to try is to export your data in a format compatible with Outlook, .csv or .tab and then import into Outlook.
    Chapura makes a program called pocket copy. It is a one time transfer of your data from PD to Outlook.
    They have a program called Pocket Mirror but is only compatible with 32 bit versions.
    Here is a link to their site.
    http://www.chapura.com/products.php

  • Bluetooth hotsync w/ palmone T5 and macbook

    I have tried everything I know. The bluetooth is working b/c I transfered a picture file, but when I try to do a bluetooth hotsync, the mac keeps asking for a "password". Does anyone have a clue how to fix this?

    my jbl bluetooth stereo headphones no longer have stereo sound but now have only mono since upgrade/ download of snow leopard. they sounded really great for months prior to the upgrade to snow leopard. i have a new imac and paired and repaired the device and still only mono sound.
    what gives? sort of a huge disappointment since i listen to a lot of music on youtube and internet radio. seems like a downgrade to me. if i knew this i would have never upgraded to snow leopard.

  • Bluetooth hotsync 755p palm and hp windows 7

    Posted in the wrong area.
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    Hello and welcome to the forums;
    Yes, a bluetooth hotsync is possible with Windows 7 64-bit on a Treo 755p. To download sync software, you can visit the support page for your device from our website:
    www.palm.com/support
    There are also several 'stickied' posts here in the forums that will walk you through step-by-step instructions to set up the bluetooth sync.
    Hope this helps,
    TreoAide

  • HT4157 I don't have celluar data on my Ipad. what app do I use? In  the place on the Apple support screen there are, Airplane mode, Wifi and bluetooth.

    I don't have celluar data on my Ipad. what app do I use? In  the place on the Apple support screen there are, Airplane mode, Wifi and bluetooth.
    Thank you in advance for your help because I don't want to take this back but if I can't figure out how to use it, I will have to.

    Henry ~ Welcome to the Support Communities.
    Henrypublisher wrote:
    I am connected to a very strong Wifi network but I still can't access anything online like my gmail account, Netflix, Safari or anything else.
    Go HERE and see the section: "If you are unable to access the Internet while connected to a Wi-Fi network".

  • TS1559 still no solution for greyed out wifi and bluetooth - what to do? been messing around with it for weeks and now discover I'm just outside of warranty period? WHAT?

    I am in such a predicament - phone not been quite right since the 6.1 update and I was tolerating the inconvenience of switching off and on etc etc for the past couple of months and now the wifi and bluetooth are totally greyed out all the time - did every restore possible including back to factory settings - still no luck - please don't tell me that trying all the solutions over the past 2 months that temporarily worked for a few days at a time will now mean I have timed myself out of the 1 year warranty? arghhhhh (I can't believe that such an issue will create the response 'oh well, your problem - best just buy another one' ???)
    I can't just drop everything and drive to the apple store and wait for hours every time there's a 'glitch' otherwise I may as well move nextdoor to the mall. They tell you to try and solve it yourself first - which I did - and now it's not responding to anything I try, will I be told - 'too late, out of warranty'???
    I see theres an update for the iphone 5 that fixes wifi bugs - what about us 4s owners? even my 3 year old 3gs is still working on wifi (haven't dared to update it!) so don't start telling me to expect that the iphone will only last 13 months - NOT AT $600 a piece
    This is madness and driving me crazy
    Please has anyone had any luck fixing this problem???

    well, you know how it is - glitches that usually resolve with a hard reset etc
    then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
    never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

  • Re: Windows Vista Ultimate 32-bit FN key and Bluetooth crash

    I have an old problem with FN key. I installed Vista and after a while, it stops working. In Windows, when I press the FN key it freezes about 3 seconds, a blue screen appears that tells me Vista has crashed, a memory dump begins and then the laptop restarts. And now, bluetooth doesn't work anymore and if I try to enable it it dows the same thing.
    P.S. The Windows is new installed (4 days), and has automatic updates to date.
    I reinstalled Toshiba Value Package, Bluetooth Monitor and Bluetooth Stack.

    LE: I uninstalled Value Package and it doesn't give me the blue screen anymore. The FN key works, but it doesn't display that menu on the top of the screen when i press it, but the functions work.

  • All data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ?????

    all data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ????? What is wrong with it????  How do I fix it????

    You aren't attached to a bluetooth headset or other device for some strange reason?  Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

  • Setting up Bluetooth HotSync - Palm Centro, Windows 7, 64 bit

    A couple of days ago I posted on here trying to figure out how to HotSync my Palm Centro with my new computer that has Windows 7 (64 bit).  I followed the instructions - had to go and buy a Bluetooth Adapter for the computer - and went through the instructions from the sticky that was pointed out to me in my original question.  I'm to the point where I'm trying to set up the phone to do a Bluetooth HotSync but when it's searching for computers it doesn't find any...
    HELP!!!!! What do I need to do now.  It may take me a couple of days to get back if anyone answers this quickly because I have a very hectic weekend but any and all advice is appreciated.  Thanks.

    Thanks for sharing your solution andygc! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • TS1559 iOS: Wi-Fi and Bluetooth settings grayed out or dim

    I have done everything from "Reset Network Settings" to "Erase All Content and Settings" and finally restoring the iOS Software (7.0.6), but the Wi-Fi settings are still grayed out. Bluetooth is also not getting enabled. Can anyone suggest what can be done?

    Powell360 wrote:
    This has happened to me very recently too. Is it a know hardware issue or do we need an update?
    Follow this article: iOS: Wi-Fi settings grayed out or dim
    If that fails to resolve the issue, follow this article: iOS: How to back up your data and set up your device as a new device
    If that fails, the device has a hardware fault.

  • Imac clock needs to be set and bluetooth doesn't remember ethernet connection

    My Imac is less than 2 years old.  Upon startup, I am getting the error message "You computer's clock is set to a date before Jan 1, 2008.  This may cause some applications to behave erratically."  It also doesn't remember which ethernet connection it had last in the bluetooth menu.  I have to choose it everytime.  What's wrong with my mac?  Is it the battery?  If so, why is this happening now when I've only owned the machine (purchased brand new) less than 2 years?  Could it be something else?

    I HAD this problem with my Power Mac G5. The "before date" was different and my date and time were correct in the menu bar! The message appeared on December 16, 2011 and on January 16, 2012. Then on January 21 I pressed the button to turn the g5 on. The light came on then went out. SILENCE.  I tried again but NOTHING. I didn't do the SMU thing as I assumed it was the power supply which I had allready replaced once (in about 2007). I hope it wasn't just a battery, because I had the hard drive put in a cradle and am about to gut the G5 so I can use that beautiful case for something else! Did you ever figure it out?

  • Why did my max loose wifi and bluetooth?

    Not sure if it was after last update or when.  But my phone lost wifi and bluetooth.  I didnt even realize until I got a data alert. I have tried a full reset witch made me very unhappy due to the apps I lost.

    Usually if you just turn the device on and off may have fixed your issues.
    A hard reset in my opinion is not necessary. If phone makers send out junk updates that actually make the devices work worse, they never should release these junk updates.
    Is your WiFi and Bluetooth functioning now? Your apps are not lost since in Google play store select MY APPS then from the list simply reload them back on the device. Both free and paid ones.
    Good Luck

  • Guide for J2ME PP to use RMI and Bluetooth

    hi
    i have a current project its about an Ordering System, and i was thinking of using ppc as an order client
    before i want to get on with this i was just wondering if i can get some help from here.
    i just want to ask would it be any problem if i use J2SE to write a server to communicate with the ppc using rmi methology and bluetooth as network device (USB bluetooth for PC). can some one please give me some direction of how to do it, or maybe there's a beta way to do something like this?
    do i just write the code as how you would normally write for rmi application for PC?
    do i need to use third party driver for bluetooth (PC and PPC)?
    btw my PPC is HP Pocket PC 2003 running Window CE and use J9 JVM
    thank you for in advance as i would really appreciate and so is others :)

    Hi,
    I have the same message "Error: Unable to query value..."
    But I can't read from serial port com8. I need to read data from gps, but first I want to read anything from com8.
    My application looks like that:
    import java.util.*;
    import javax.comm.*;
    import java.io.*;
    public class Porty {
    static CommPortIdentifier portId,tym;
    static Enumeration portList;
    private InputStream cos;
    private SerialPort porty;
    public Porty(){
         CommPortIdentifier portID = null;
         for (Enumeration portList = CommPortIdentifier.getPortIdentifiers();
              portList.hasMoreElements() ;) {
         CommPortIdentifier portId = (CommPortIdentifier)portList.nextElement();
         if (portId.getName().equals("COM8:")) {
              tym = portId;
         if (tym == null) {
         // Unable to find COM8
              System.out.println("No Com8");
         return;
         else {
         // found COM8
              System.out.println("Yes!!! Com8");
         try{
              cos = porty.getInputStream();
         }catch (IOException e){}
         System.out.println("Data from Com8");
         System.out.println(cos);
    public static void main(String[] args){
         Porty porcik = new Porty();
    What is wrog. Could samebody help me !!! What I suppouse to do !!! Could You send me same application, which is working and it reads from port.
    Thank You...

  • Where do I find my WiFi and Bluetooth MAC address on my Blackberry?

    Where do I find my  WiFi and Bluetooth MAC address on my Blackberry?
    Cheers FT

    Options > Status.
    good luck!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wifi and bluetooth can't be turned on

    Hello guys, I have got some problems with my Sony xperia z3 smartphone, well it was like in faritayl one morning I woke up and sow that WiFi was off, I tryed to make it on again but the wifi icone dose not react, the same thing when I try to make it on in settings it doesn't react, I make it one go out of settings and when I go back to wifi setting its desactivated again, the same trouble with bluetooth. If someone can help me please write me, I will be very glad, thank you for attention.
    Topic edited by Rickard
    Solved!
    Go to Solution.

    Sorry to hear that you have issues with WiFi and bluetooth
    I'm afraid this sounds like it may be a hardware issue in your phone but i recommend that you first try to reinstall the phones software using PC Companion but please note that this will reset your phone and delete all your data.
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, please contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for