ZISD sector a moving target with ZEN 7?

I participated in a thread on ENGL's forums concernign their ActiveX
control for reading the ZISD data from within Windows using VBScript. I
asked them if it was OK to use the v1.0 of their ActiveX control with
ZEN 6.5 and ZEN 7.0 (it only listed ZEN 3.x-4.0).
Heath said they plan on releasing a ZEN 6.5/7.0 compatible version in
January 2006, which is good.
I asked him why they needed to release a new version, and he said
something along the lines of with ZEN 7, the ZISD isn't always located
at Sector 6 like it was in older versions of ZEN Imaging. Here is what
he said:
"The current release of ZisdCtrl supports ZISD @ sector 6, with ZENworks
7 ZISD may not necessarily be written at sector 6."
Does anyone have any info on this kind of thing? I am interested in
knowin gwhat some of these changes are and why they were made.
I cannot find anything on Novell's site.

The info from Heath is correct, it ZISD isn't alway's at sector 6
The reason why is because als GRUB likes to use the first few sectors on the
disk, and as such imaging had some problems with Linux Machines using GRUB.
Ron
"Jeremy Mlazovsky" <[email protected]> wrote in message
news:t%gsf.1846$[email protected]..
>I participated in a thread on ENGL's forums concernign their ActiveX
>control for reading the ZISD data from within Windows using VBScript. I
>asked them if it was OK to use the v1.0 of their ActiveX control with ZEN
>6.5 and ZEN 7.0 (it only listed ZEN 3.x-4.0).
>
> Heath said they plan on releasing a ZEN 6.5/7.0 compatible version in
> January 2006, which is good.
>
> I asked him why they needed to release a new version, and he said
> something along the lines of with ZEN 7, the ZISD isn't always located at
> Sector 6 like it was in older versions of ZEN Imaging. Here is what he
> said:
>
> "The current release of ZisdCtrl supports ZISD @ sector 6, with ZENworks 7
> ZISD may not necessarily be written at sector 6."
>
> Does anyone have any info on this kind of thing? I am interested in
> knowin gwhat some of these changes are and why they were made.
>
> I cannot find anything on Novell's site.

Similar Messages

Moving country with Zen Mi

I am moving from the UK to Australia in a few months, and wish to buy a Zen Micro. However, many people have known to have problems where the player has had to be replaced. Just in case this happens to me when I arri've in Australia, is the warranty still valid and can I go direct to Australian support?

Check the warranty small print- It says it is only valid in the territory or country it was purchased in, although that seems a bit mean, as most companies would give you a worldwide warranty.
Also The warranty for the Micro for the UK & Australia are identical, so i cannot see what the issue is!!
Maybe one of the Mods can answer this- seems crazy- Micro is sold in almost every electrical shop over here in Australia, so it's not like they aren't common, and the warranty is idenitcial (not like in the US wehre it is different regarding lengths of service etc.

Time Machine - Moving Target

I am running a early 2008 MacBook Pro 15" and have succesfully moved to Mountain Lion on the day of release. I run two Time Machines, one at work and one at home. The one at work has filled up and I opted to have Time Machine make space by deleting old backups. That is fine until fairly recently. Time Machine now has moving targets and my backups fail. By moving targets, for example, after preparation, Time Machine indicates, say, 3.5 Gb are to be backed up. It seems to go ok for a while, but as it nears the end, the end size keeps increasing so it never finishes and eventually, around 65 Gb of 72 Gb it fails. So I did a manual start of the backup and watched it. Next time around it wants to backup 3.55 Gb. It fails when both the target and have both crept up to 10 Gb. This is not happening on the home Time Machine disk, or at least not yet. Is my only option to erase the entire disk and restart Time Machine on it? Any other solutions? I still have one Time Machine, but I like to keep two (don't like single points of failure).

Thanks, but that is not the case. I usually do a couple things in Windows then I shut down the virtual machine and I usually turn off Time Machine while I am in the VM. I do this because in the past, when using the VM and a Time Machine backup is triggered, it makes the VM rather unusable. Still this doesn't explain why Time Machine works in one location and not the other, because I do perform the same tasks at home and at work.
I've had my internal HDD die before and a full Time Machine backup saved me when Apple replaced my HDD. So after waiting overnight for the restore, everything including the VM virtual disk was restored in one step. I have since upgraded my HDD to an SSD so Time Machine saved me a bunch of grief when I replaced a perfectly working HDD with the SSD. I like Time Machine so much that I found a couple of similar products for my wife's Windows machine and for my mother's Windows machine.
I essentially solved the problem the low tech way, I reformatted the disk and let Time Machine do the initial backup. Since the "old" backups were under Lion, and I am on Mountain Lion, I don't really need the old backups. I did a full verify, via Disk Utility before and after reformatting, the disk was fine with zero errors.

Problem with Zen Xt

I purchased a refurbished Zen Xtra back in May and had the player lock up on several occasions. It would eventually resolve if I let the batteries drain and then recharge. The last time it happened I came to these forums and learned how to enter recovery mode. I tried to do a firmware update which failed and now the player will only boot into recovery mode. When I attempt to do the firmware update I get the message player not connected. I can see the player connected in windows and can actuall browse the HD which is obviously now empty. How can this be resolved?

Re: Problem with ZEN MX >FYes, it's true. Creative Centrale is full of **bleep**.:robotmad: You can use it only to one thing. To convert films from your computer to their stupid format called "cmv". But even with this it's stil the same problem. This is crap, because sometimes you can do it, but sometimes not. Beside of this Creative Centrale doesn't have any good functions. For further users - don't install Creative Centrale! You will have more free space and do all things (without moving films to watch on your player) just from your computer and not this **bleep**.

Moving Target DB and Abstract Schema

I apologize in advance for seeming clueless. My explanation is this: There is no money. I have inexperience staff. I've been away from building architectures too long to be specific. I can't buy a contractor. I need some advice.
We are converting many Access applications to Java/J2EE/AnyRerelationalDB The way we have planned to approach this is to divide the DBs into various classes, say Personnel records, Vehicles, ...so on). These DBs will be moving targets that will change as we are able to discover Access applications that add/change features to whatever class of DB we're working with at the moment.
My goal is to eliminate changing each and every App everytime some DB parameter changes (DBMS, changed attribute, ..., etc). I think EBJ/abstract schemas will let me to get a generic view of the DB and insulate the App from the very real possibility of changing DB parameters.
I need some help verifying this or pointing me in a better direction.
Thanks for your help,
Bob

I apologize in advance for seeming clueless. My
explanation is this: There is no money. I have
inexperience staff. I've been away from building
architectures too long to be specific. I can't buy a
contractor. I need some advice.
We are converting many Access applications to
Java/J2EE/AnyRerelationalDB The way we have planned
to approach this is to divide the DBs into various
classes, say Personnel records, Vehicles, ...so on).
These DBs will be moving targets that will change as
s we are able to discover Access applications that
add/change features to whatever class of DB we're
working with at the moment.My first advice is that the description of you team doesn't bode well for the success of the project described in the second.
Let me frame it in another context to illuminate how dubious this sounds:
I want to build house with curved glass walls, high vaulted ceilings perched on a steep hillside. There is no money. I have inexperienced staff. I've been away from building houses too long to be specific. I can't buy a contractor.
My goal is to eliminate changing each and every App
everytime some DB parameter changes (DBMS, changed
attribute, ..., etc). I think EBJ/abstract schemas
will let me to get a generic view of the DB and
insulate the App from the very real possibility of
changing DB parameters.If you use an EJB layer than supports XDoclet or other portable CMP, yes, it will do this. However, it's not a simple and it your table structure changes significantly, your EJB will not work autmatically. The fact of the matter is that EJB is pretty complex and requires a lot of esoteric knowledge. Many EBJ projects have failed or produced terrible results. If you don't have any very capable developer/designers and/or have no developers with solid EJB experience I would under no circustances attempt this. EBJ is often overkill anyway. The real point of EJB is to help with distributed computing, not to abstract away the DB schema.
I simple approach that many people overlook is to use stored procedures. Stored procedures create a layer of abstraction between your code and the DB such that the DB can change without changing the code.

EJB, Moving Target DB, Abstract Schema

I apologize in advance for seeming clueless. My explanation is this: There is no money. I have inexperience staff. I've been away from building architectures too long to be specific. I can't buy a contractor. I need some advice.
We are converting many Access applications to Java/J2EE/AnyRelationalDB The way we have planned to approach this is to divide the DBs into various classes, say Personnel records, Vehicles, ...so on). These DBs will be moving targets that will change as we are able to discover Access applications that add/change features to whatever class of DB we're working with at the moment.
My goal is to eliminate changing each and every App everytime some DB parameter changes (DBMS, changed attribute, ..., etc). I think EBJ/abstract schemas will let me to get a generic view of the DB and insulate the App from the very real possibility of changing DB parameters.
I need some help verifying this or pointing me in a better direction.
Thanks for your help,
Bob

I think your best option is to implement CMP entity beans with a facade of services (business logic) that access the beans as tables in a DB. The only advantage of doing this will be the DB vendor independence and transparency because you define static queries in a declarative way.
I don't quite understand what you mean by DB parameters. But if you refer to changes to the database schema like new tables, new fields or changes to existing fields, you still need to align those changes with the attribuites in your application.
Cheers

Issue in Data from DSO to DSO Target with different Key

Hello All,
I am having Issue in Data from DSO to DSO Target with different Key
Source DSO has Employee + Wage + Post numner as key and Target has Employee + Wage Type as key.
DSO semantic grouping works like Group By clause in sql, is my understanding right ?
Also if someone can explain this with a small example, it would be great.
Many Thanks
Krishna

Dear, as explained earlier your issue has nothing to do with semantic grouping .
Semantic grouping is only usefull when you have written a routine in the transformation for calculations and in error handling .
Please go through this blog which explains very clearly the use of semantic grouping .
http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/06/16/semantic-groups-in-dtp
Now coming to your above question
DSO 1
Employee WageTyp Amount
100          aa          200
200          aa          200
100          bb          400
100          cc          300
If we have semantic group as Employee . If we have Employee as key of the target DSO and update type as summation .
then target DSO will have
Emp                Amount
100                 700
200                 200
In this case Wage type will be the last record arriving from the data package . If the record 100 cc 300 is arrivng last then wage type will be cc .
2) Case 2
DSO 1
Employee WageTyp Amount
100          aa          200
200          aa          200
100          bb          400
100          aa          300
if we do Semantic grouping with Emp and Wage Type   If we have Employee and wage type as key of the target DSO and update type as summation .
then target DSO will have
Emp     Wage      Amount
100          aa          500
200          aa          200
100          bb          400
Hope this helps .

Random Problems with Zen Micro? Try a diff. USB cable

I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
Hope this helps - I am (now) loving my new Micro!

I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
My old Zen Micro with the old, original firmware did NOT have this connectivity problem
Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

Target operation is unavailable: cleanup of previous target with the same n

Greetings,
In OEM 12c I have several clusters. For one, from the console I deleted the cluster and then manually added the cluster target back. The operation was successful but for one of the high availability (has) services a metric collection error is displayed. For that particular target the EMDIAG output reports -
Target operation is unavailable: cleanup of previous target with the same name is still pending
I have not been able to find an explanation of that nor how to resolve it. Can anyone assist me?
Thank you.
Bill Wagman

Hi,
You can remove the target from monitoring and add it again, that can solve the problem.
Regards,
Venkat

Trouble with ZEN MX

Trouble with ZEN MXWHi,
I have some issues with my zen mx,? primarily sometimes when I listen to a playlist containing many tracks or "all tracks", my player sometimes shuts of and then have to scan the disk pefore working.
Secondly there are small pauses during playback, maybe every third track or more, I'm only talking about something like a thenth of a second but it's still very annoying. This also occurs when I have many tracks in my playlist.
Thirdly I'm not able to access the recovery mode, I've tried following the instructions from the sticky-thread in the forums (Turn on player and hold in the reset butto). However when I do, the screen goes black and no recovery mode appears ever if I hold down the button for a long time.
Anyone knows how th fix theses issues?
thanks,
/Kvick

Kvick,
Please follow these steps to access the recovery mode. If this is not working for you, please feel free to contact Customer Support for further assistance.

Slow Moving Materials with qty

Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish Jain

Please check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM

How to open a pdf from pdf target with page no using javascript

Hi
How to open a pdf from pdf target with page no using javascript
Thanks in Advance.

Hello,
<p>Web.show_document calling .htm files saved on disk.....</p>
Francois

Artifacts when moving object with arrow keys.

Hi all
hope this is the right place to post this question.
I want to to write simple arkanoid game in Flash (AC3). I've managed to write code that moves my paddle with arrow keys. The code looks like this:
function OnNewFrame(event:Event):void
    if (input.IsLeftHeld)
        if (paddle.x > 0)
            paddle.x -= 10;
    else
    if (input.IsRightHeld)
        if (paddle.x < stage.stageWidth - paddle.width)
            paddle.x += 10;
It works but the result is ugly. The animation is not fluent, there are times when paddle stops for a moment . Also when speed of translation is high (here it is 10) you can see that paddle is flickering at the ends, it looks like single buffering problem. You can see both of those effects here: http://www.flash-game-design.com/flash-tutorials/movOb.html , hovewer flickering is less visible due to small translation amount.
How to fix this? How can i enable double buffering (or maybe it is enabled by default)? Any help will be appreciated.
P.S. sorry for bad english

Thanks for samples, this is very kind ; p
Hovewer you are doing everything almost exactly as I'am doing. Tou are using mySymbol.x++ which means your translation speed is 1. Also I'am aware that rising frame rate will result in smoother animations, but this is not the point. So once again, my flash applications suffer from two problems:
1) Animations are not smooth. You can see this crealrly in here: http://www.kirupa.com/developer/actionscript/hittest.htm , go back to the very bottom of the page, there is an animation window, look at the smallest circle. It looks like its blinking.
2) Moving symbols with arrow keys with the method i've presnted in the first post (the same method that infeter uses ). Moved symbol is randomly stopping for the very (very very) short amount of time. You can easily spot this in infeter sample.
Many sample applications i've seen suffer from those issues. and nobody seems to see the problem, so maybe I am delusional? ; p
cheers and thank for help

Problem with ZEN Style M300

When I trying to found bluetooth audio devices with ZEN Style M300,? the player get to freeze after a little bit time that is searching devices, and so I have to push the reset button for using again the player. :mansurprised:Anyone have the same problem?

I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over.

How do I stop the ruler from moving along with my guide line as I move it?

Hello everyone,
I am new to muse and may well be missing the obvious here, but I have a little problem, which until it is solved is a big road block to me.
I am trying to move a guide lower on the page and can not do that because the left ruler is moving along with the guide!
How do I lock the ruler itself, so the guide can be moved to a different position on the ruler?
Totally weird. I have tried searching "locking rulers" both in this site and in google, but got no results at all. I don't think the rulers are supposed to move in the first place, so am worried that nobody out there may have an answer to this.
So I am stuck for now & I can't finish my project unless this is solved.
Thanks for reading,
Pat

I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
What happens if you uncheck rulers from top view options ?
Thanks,
Sanjit

ZISD sector a moving target with ZEN 7?

Similar Messages

Maybe you are looking for