ZLM Event Log and System Event Log

I just created my base ZLM server using version 7.3 and updated a test SLES 10 server to use the 7.3 agent. The SLES server was running sp1 and running the 64-bit OS. I was able to successfully upgrade the server to sp2 but I noticed I don't get any entries in the event or system event log areas. This is under the Devices > Servers > Server name I could tell if the bundles installed successfully or the device was refreshed. I don't get anything now. Any thoughts or suggestions on how to fix this?

Oops. Sorry. Here is the output from rug ping
ZMD 7.3.0, Copyright (C) 2009 Novell, Inc.
Started at 4/15/2009 2:13:14 PM (uptime: 1 days, 23 hours, 33 minutes)
RSS size: 141440
Network Connected: Yes
Running on Mono 1.2.6
OS Target: SUSE Linux Enterprise Server 10.2 (x86_64)
Module Name | Description
-------------------+-------------------------------------------------
Image Agent Module | Novell ZENWorks Imaging Agent
Policy Manager | Manages policy enforcement on the device
Settings | Handles Settings refresh events.
TessModule | Tess Module
Inventory | Software and Hardware inventory module for Linux
NetworkManager | NetworkManager support
Package Management | Package Management module for Linux
RMModule | Remote Management module
ZENworks Server | SOAP methods used by a ZENworks server
Scheduled Actions | Scheduled Actions module for ZMD
XML-RPC interface | Export ZMD public interfaces over XML-RPC
log level is set to info
log-level | info | Logging level (off, fatal, error, warn, info, debug)

Similar Messages

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with inst

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?

yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(

What are application events and system events? what is difference between ?

what are application events and system events? what is difference between ?

The Control Framework triggers the event irrespective of the screen flow logic, that is, without processing the PAI and PBO events. These events are called system events. This type of event processing is the default setting.
·The Control Framework processes the PAI module after an event. In this case, you must call method CL_GUI_CFW=>DISPATCHto initiate the event handling of ABAP Objects. These events are called application events.
Application Event : you must first register the events for the control instance and consequently on the frontend.
like..
DATA events TYPE cntl_simple_events.
DATA wa_events TYPE cntl_simple_event.
1. Using field
appl_event , define the event as an application event:
wa_events-appl_event = 'X'.
System events are passed on irrespective of the flow logic of the relevant screen.
1. Change the value of field
wa_events-appl_event in the PBO module:
wa_events-appl_event = SPACE.
Edited by: Devi Raju on Jul 1, 2008 1:48 PM

EM Application Log and Web Access Log growing too large on Redwood Server

Hi,
We have a storage space issue on our Redwood SAP CPS Orcale servers and have found that the two log files above are the main culprits for this. These files are continually updated and I need to know what these are and if they can be purged or reduced down in size.
They have been in existence since the system has been installed and I have tried to access them but they are too large. I have also tried taking the cluster group offline to see if the file stops being updated but the file continues to be updated.
Please could anyone shed any light on this and what can be done to resolve it?
Thanks in advance for any help.
Jason

Hi David,
The file names are:
em-application.log and web access.log
The File path is:
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_brsapprdbmp01.britvic.BSDDRINKS.NET_SAPCPSPR\log
Redwood/CPS version is 6.0.2.7
Thanks for your help.
Kind Regards,
Jason

Log and capture or Log and transfer?

I'm a newbie to FCP, I've been working at it and researching, so I have a basic understanding, been able to do some good stuff, now I'm looking to find more time-economical ways to do things. I'm a football coach, looking to cut up game films into individual plays (1 play per clip), and ideally being able to name each clip by it's play name "Trap" or "Pop Pass" for example. It looks like I need to get into logging if possible. My workflow at present when dealing with an opponent's film is to take a DVD, and get it onto my computer using MPEG Streamclip. I've been using DVC-PAL as a codec at someone's suggestion, I can't rmemeber where I got that. Is this a mistake? Anyhow, I now import that movie file into FCP using File>Import. At this point I can't do any logging though, if I try Log and Capture or Log and Transfer I get "Unable to initialize video deck", though it tells me I can still use Capture Now. Once it opens the Log and Capture window, I get "Error: this operation requires a controllable deck." and directs me to the Audio/Video Settings. Here's where I'm pretty much lost. Do I try to adjust settings from here? If so, to what? Do I need to start by changing my MPEG Streamclip settings and then trying to match those up in my FCP Audio/Video Settings? Or do I need to completely overhaul the way I'm approaching this? ARGH! I've been impressed with myself getting to this point, any help from here would be greatly appreciated, thanks all!
Grouch

Log and Capture is used if you are capturing footage from tape based formats. DV, HDV, HDCAM...others.
Log and Transfer is for tapeless camera systems. P2, XDCAM, Canon DSLR, AVCHD.
If your footage comes from DVDs...and you convert the footage to QT files...then you simply go to FILE>IMPORT. You don't log with this method. Just import and work with the footage.

Can u please tell me events trigaring and first event in report

hi experts,
can u please tell me events trigaring and first event in report

actually first event triggering in a report is intialization
but before that there is one more event get triggered that is load of program.....This is the very first event which is trigger in a report program. Really I have never needed a reason to use this. But I would assume that it can be used when you want to do something before the INITIALIZATION event.
Classical Reports can have these events, in the given order :
initialization
at selection-screen
start-of-selection
end-of-selection
top-of-page
end-of-page
In addition o the above, the following events are possible in case of Interactive Reports -
at line-selection
at user-command
at PFnn.

The file structure online redo log, archived redo log and standby redo log

I have read some Oracle documentation for file structure and settings in Data Guard environment. But I still have some doubts. What is the best file structure or settings in Oracle 10.2.0.4 on UNIX for a data guard environment with 4 primary databases and 4 physical standby databases. Based on Oracle documents, there are 3 redo logs. They are: online redo logs, archived redo logs and standby redo logs. The basic settings are:
1. Online redo logs --- This redo log must be on Primary database and logical standby database. But it is not necessary to be on physical standby database because physical standby is not open. It doesn't generate redo log. However, if don't set up online redo log on physical standby, when primary failover and switch standby as primary. How can standby perform without online redo logs? In my standby databases, online redo logs have been set up.
2. Archived redo logs --- It is obviously that primary database, logical and physical standby database all need to have this log file being set up. Primary use it to archive log files and ship to standby. Standby use it to receive data from archived log and apply to database.
3. Standby redo logs --- In the document, it says A standby redo log is similar to an online redo log, except that a standby redo log is used to store redo data received from another database. A standby redo log is required if you want to implement: The maximum protection and maximum availability levels of data protection and Real-time apply as well as Cascaded destinations. So it seems that this standby redo log only should be set up on standby database, not on primary database. Am my understanding correct? Because I review current redo log settings on my environment, I have found that Standby redo log directory and files have been set up on both primary and standby databases. I would like to get more information and education from experts. What is the best setting or structure on primary and standby database?

FZheng:
Thanks for your input. It is clear that we need 3 type of redo logs on both databases. You answer my question.
But I have another one. In oracle ducument, it says If you have configured a standby redo log on one or more standby databases in the configuration, ensure the size of the current standby redo log file on each standby database exactly matches the size of the current online redo log file on the primary database. It says: At log switch time, if there are no available standby redo log files that match the size of the new current online redo log file on the primary database. The primary database will shut down
My current one data gurard envirnment setting is: On primary DB, online redo log group size is 512M and standby redo log group size is 500M. On the standby DB, online redo log group size is 500M and standby redo log group size is 750M.
This was setup by someone I don't know. Is this setting OK? or I should change Standby Redo Log on standby DB to 512M to exactly meatch with redo log size on primary?
Edited by: 853153 on Jun 22, 2011 9:42 AM

Difference btwn xfa.event.change and xfa.event.newText pls?

Hello
I tried to figure out the difference between xfa.event.change and xfa.event.newText in google, but did not see any such!
Pls. could you clariy my question that what is the differenvce between these 2 (xfa.event.change and xfa.event.newText)?
Thank you

Thank you. With out having much knowledge on JS, i wrote the below JS
myFomr.Page2.mySubform21.myCheckBox211::exit - (JavaScript, client)
// To check this check box, bank acct # is must to enter by user
if (this.rawValue == "X"){
if ((xfa.resolveNode("myFomr.Page2.mySubform21.BankNumber").rawValue == null) || (xfa.resolveNode("myFomr.Page2.mySubform21.BankNumber").rawValue == "")) {
xfa.event.change = "";
My impression was, i can change a value (in the above case am unchecking the check box by populating it with ""/space) of any (text, check box, drop-down) field on the form explicitly by using this script
(xfa.event.change = "";),
i already placed in around 20 locations, so, pls. suggest me do i need to correct all these 20 locations, kind of risk/tediuos at this point or is it ok that leave as is?
Thank you

Acrobat pro and system events

Hi,
I want to make some changes in the properties of a row of pdf's. I want to change the magnification and page layout. I only know a bit of applescript. Yes I know it isn't Javascript but I didn't find a place for applescript, I am sorry..
this is what I've got:
tell application "System Events"
   tell process "Acrobat"
       activate
       tell menu bar 1
           tell menu bar item "File"
               tell menu "File"
                   click menu item "Properties..."
                   tell window "Properties…" of process "Acrobat"
                   end tell
               end tell
           end tell
       end tell
   end tell
end tell
I can't set the magnification to "fit page" and page layout to (two up cover page)
Who can help me please?

Acrobat forms only run Acrobat JavaScirpt within the form. You can use Apple Script and the Acrobat API to access the JavaScripts within a PDF or run some JavaScript within a PDF.

OPMN system.out and system.err log rotation?

I would like to rotate the log generated by OPMN by default for system.out & system.err, which is named:
OC4J~APPNAME~home~default_island~1
I see the entries in the opmn.xml file for the ons.log and ipm.log which ARE being rotated properly. I've read that you can redefine the log file for system.out and system.err, but can't find any about rotating these logs.
Does anyone have any info about this topic?

If anyone's curious and is trying to do this themselves, I eventually asked Oracle, who stated it could not be done.

How do I change the location of the coldfusion-out.log and coldfusion-error.log files in CF10

When I change the log location in ColdFusion Administrator it changes the location of most but not all the log files. I have a requirement from my customer to place all log files on a separate partition on the server. For ColdFusion 9 I was able to modify the registry settings to change StandardOut and StandardErr for the ColdFusion Jrun service. This does not appear to the case for ColdFusion 10 which now uses Tomcat 7.
I tried modifying log4j.properties file and was able to relocate the hibernatesql.log, axis2.log, and esapiconfig.log but not the coldfusion-out.log.
I am running ColdFusion 10 Enterprise Edition on a 64-bit Windows 2008 Server.

The location of the rest of the ColdFusion logs can be changed in the ColdFusion Administrator. Go to the Debugging and Logging section, Logging Settings. There is a form at the top of the page where you can change the log storage location.
-Carl V.

Dataguard lost both Primary redo log and standby redo log files

Hi,
I am new to data guard, i came acorss a scenario where we loose both primary redo log file and standby redo log files.
Can someone please help me understand how to recover from this situation.
Thanks!

>loose both primary redo log file and standby redo log files
We have to be very clear.
There are (set A) online redo log files and (set B) standby redo log files at (location 1) Primary and (location 2) Standby.
The standby redo log files, depending on the configuration, aren't strictly mandatory. The standby can be applying redo without online redo log files present as well, depending on how it was setup.
So, the question is : Did you lose online redo log files at the primary ? Didn't the primary shutdown itself then ? If so, you have to do an incomplete recovery at the primary OR switch over to the standby (which may or may not have received the last transaction, depending on how it was configured and operating) OR restore from the standby (again, with possible loss of transactions) to the primary.
Hemant K Chitale

How could I find specified date of REDO log and archive REDO log ?

we use Oracle11gr2 on win2008R2.
1
How could I find specified date of REDO log(2013/10/17,etc) and archive REDO log ?
2
What is the format of archive REDO log.? (zipped file ?)

user12075536123 wrote:
1)
select * from v$archived_log;
select * from v$log_history;
but there is a possibility there is no old data
below contains no filename column
SQL> desc v$log_history
Name                                      Null?    Type
RECID                                              NUMBER
STAMP                                              NUMBER
THREAD#                                            NUMBER
SEQUENCE#                                          NUMBER
FIRST_CHANGE#                                      NUMBER
FIRST_TIME                                         DATE
NEXT_CHANGE#                                       NUMBER
RESETLOGS_CHANGE#                                  NUMBER
RESETLOGS_TIME                                     DATE
there is NO data when archive mode is disabled

Logging the system boot log

Hi all,
I have 2 systems A,B. I want to log the reboot log of system B on system A.
How can I achieve this thru CLI ?
Mostly I am looking for a non-interactive script which will do this for me,everytime I wanted to reboot system.
Regards,
~

Hi,
What’s your OS version you are using? If it’s Windows Server 2003, please try to install the hotfix below to see if it could resolve the issue. As it mentioned, the issue may be caused not
only by the disk larger than 1TB, but also by other factors.
"The Operation Did Not Complete" Error Message When You Try to Convert a Hard Disk to a Dynamic Disk
http://support.microsoft.com/kb/826823
Hope it helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Mysterious "New Event"s and duplicate events

I sync my iPhone with my iCal calendars manually via USB, and lately I've been having an issue with events showing up in my iPhone calendar that aren't in my iCal calendar. Sometimes they are just called "New Event", while other times they have only the title of a real event.
I cannot figure out why these keep appearing, as they aren't in my iCal calendar. I've tried to delete the calendars from my iPhone by deselecting the "Sync Calendars" option, but that doesn't seem to clear them from the iPhone. I've also tried to replace the ones on the iPhone with the ones on my computer using the "Replace Information" option, to no avail.
Is there anything I can do?

Hi Paul,
I tested with 3.7.1.4 and 3.7.1.5. In both versions I can see the issue.
reg
Dasun.

ZLM Event Log and System Event Log

Similar Messages

Maybe you are looking for