Zone edit, my first attempt; would like some assitance please :P

Hello,
spent the week getting this server up (first time). have done well, got to domains working just fine.
but i'd like to be able to add an SPF record to my zone. but i have not idea how to do this. From what i can tell from reading the forums and such; this is my zone record to edit (correct?):
zone "ipaultech.com." in {
file "ipaultech.com.zone";
type master;
if this true, how do i add the following text record:
"v=spf1 a mx ~all"
if you could "dumb-down" your ansewer/reply i'd greatly appreciated it
--Paul
BTW: if you know any links for Macosx and dns/bind, i wouldn't mind them.

Ahhhhh..... i totally get this. man i wish i knew about this dir about three days ago
much thanks to you ((¿))
--Paul
• G5 Tower >> • Two- 15" G4 Pb >> • 20" G5 iMac >> • Mini (cute little server)

Similar Messages

I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.

I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
Artist: Imagine Dragons
Album: Night Vision

Report it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Maybe making the switch from AVID to FCP, would like some input please.

Happy T-Day to all. Would really appreciate any thoughts on this. I have many questions and need some answers from folks who are not always pushing AVID ( my vendor) I am a one man shop and use all Apple apps (LiveType, Motion, etc.) but have always stayed in my comfort zone with AVID Xpro and MOJO. Am thinking of going to Media Composer but after a few days of consideration and a trip to an Apple store, I may do a complete turn around and commot to FCP. Recently made the move to HD with the Sony XDCAM HD system. Here are my questions...plese be patient, this is a major move for me.
1. If I purchase a new Intel G-5, will the internal SATA drives be OK for 35MPS HD?
2. What AJA card or product should I buy so I can view HD SDI on a client monitor and output HD to a Sony XDCAM HD F-70 Deck?
3. What graphics card should I order on the new machine?
4. Can I use the FAM ( File Access Mode) to tranfer content?
5. Any other considerations when ordering the new Intel machine?
I know I have many questions, but I really believe it is time for me to make the move. Any help would be really appreciated. Thanks again.
Tdub

1. Yes, but just. You'd only get 1 stream. Faster drives would allow you to do more than one layer of real time playback. You could stripe more than one internal sata and get the job done that way.
2. Kona LHe will do this, however you'd gain the ability to upconvert and cross convert the video to just about any format with the Kona 3.
3.The X1900. Motion and some effects in FCP will take advantage of it... down the line FCP is likely to rely more on the GPU is an educated guess of mine. the top of the line card is faster, but not enough to substaniate the price if you're working in Video. If you were working in 3D CAD environments, then the top of the liner would be the best choice.
4.I don't use XDCAM here, so I'm presuming that you're talking about a transfer mode with that. I'm pretty sure FCP 5.1.2 added this capability. Might search the COW on this term in the FCP forum there. http://www.creativecow..net.
5.Working with HD and MPEG streams would leave me wanting the fastest of the three machines. You'll want 4 gigs of RAM, but it's less expensive from other than Apple. I know just how scary it can be to move to a new platform, and did exactly as you are contemplating when FCP 2 arrived. I've never looked back. Hang here once you get started, and we'll help you with the transition. There is a book out there in the pro training series from Apple/Peachpit on ediiting on FCP if you're coming from Avid. I'd recommend you get that book. Will ease the transition no doubt.
Hope you make the jump!
Jerry

Powershell "RunAs" causing recycle bin issues. Would like some input please.

I developed a script to assist our UserAdmins with creation of AD user accounts and create home folders on the server shares. I am encountering an issue with the recycle bin becoming corrupt when the user first logs in. This script must be run
with an elevated account with permissions to the shares. I also noted a change in the way the recycle bin is displayed in the share.
The home folder is created using:
New-Item -ItemType Directory -Force -Path $directory
If I log into my machine as my elevated account and run powershell/powershell_ise, all is well. The recycle bin displays as "Recycle Bin" with the correct icon image
However, if I log into my machine with my non-elevated account and select "Run as a different user" for Powershell or Powershell_ISE and use my same elevated account from above the users receive "corrupt" recycle bin errors when logging
in or viewing the recycle bin properties. Additionally, recycle bin is now listed as "$Recyle.Bin" and is using a folder icon. This issue is resolved by removing the users AD account from the home folder permissions and re-adding it with
identical permissions.
I see this behavior using Win8.1 x64 as well as Win7 x64 Enterprise.
On another somewhat relevant topic, when launching Powershell_ISE with "Run as a different user" it often freezes and must be forcibly closed. Could be relevant, could be coincidence.
I appreciate any input you may have regarding this issue.
Thanks,
Jeff

I'm trying not to come off as combative, but I feel you are misunderstanding or I am not being clear. The recycle bin is auto-created when the user first logs into the machine as is are the sub folders to the parent folder. All of the desktop.ini files,
recycle bin folders and various other user profile objects are created upon first login by that user inside of the folder created in the PowerShell script. Prior to this the user admins were manually creating the same parent folder with their elevated
accounts. Given the isolated conditions in which it works vs when it doesn't there is no indication that permissions are causing this issue.
I'll try to explain why the issue, I believe, lies with PowerShell.
1) Launch a PowerShell session from the current logged in elevated account
2) Run the script
3) Users home folder is created
4) Upon user logging in for the first time the user profile objects are created in the home folder on the share
5) No issues with recycle bin
vs - from the same machine, same script
1) Launch a PowerShell session with "Run as different user" context using the same account from above
2) Run the script
3) users home folder is created
4) Upon user logging in for the first time the user profile objects are created in the home folder on the share
5) Recycle bin is corrupt and icon is wrong
The only thing that changes between these 2 scenarios is the way in which PowerShell is run.
It's the same computer, the same test user account, the same share, same GPOs and AppSense policies.
Scenario 1 is run from elevated account logged into local machine
Scenario 2 is run from non-elevated account with "Run as different user" context using the elevated account
I know I'm sounding like a broken record but it doesn't make sense AppSense or GPO or even folder permission would cause an issue when the folder is being created using the same account in both situations.

Ordering new Mac Pro. Would like some advise please.

Okay, here we go. I am a freelancer who shoots in 1080i and 720p using a JVC 700 U camera with really good glass. in a small market. So bringing the media in is a piece of cake. I do not see me going to 2K or 4k anytime soon. I produce a weekly hour long sports program and various other projects... training, docs, marketing videos, etc. Very seldom more than 4 streams on the timeline. I have a budget of around $5,000 for a new machine. Here is what I am leaning towards. I would appreciate any advice.
6 core, 32 GB ram, upgrade to D700 GPU's, 512 GB storage. I use two G-Tech 4TB Thunderbolt drives for media. I also have a Thunderbolt display. Any concerns or thoughts? You folks always have great advice so I am looking forward to your opinions.
Cheers,
Tom

quote:
Basically the FirePro D300 is a lesser version of the W7000, the D500 is a lesser version of the W8000 and the D700 a lesser version of the W9000. Interestingly the D700 (Practically a Rebrand) has not been physically disabled any further than the W9000 yet it gives about 0.5 TeraFlops less compute than the AMD FirePro W9000. Needless to say AMD’s take on efficiency is very interesting and though we dont see a market for such a series apart from Mac Pros, AMD might decide otherwise.
http://wccftech.com/generation-amd-professional-gpu-arrives-firepro-d700-leads-p ack-35-teraflops-compute/

I would like some Help please!

Hey everyone. I bought a new Ipod 30Gb Black Video yesterday which i recieved at about 11am. I turned it on and it got stalled on hold. I couldnt turn the ipod off or nothing at around 3 the Ipod was dead so I installed all the programs and plugged it into the computer at around 3.45. It has been on all night and now at almost 1 the next day it is still saying Do Not Disconnect. I have been into Itunes many times and cannot see that in anyway being in contact with the ipod. What should I do. I am planning to leave it on till about 7.30 tonight but thats the latest I can really do.
Also When I open up itunes and go into Prefrences and click Ipod it says that there is no Ipod Connected.

Report it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

First, I would like to know if its 2014 in this forum like it is here in NJ. Second, I'd love to pick the brains of some Galaxy S5 people. Im assuming I'm in the wrong spot. If you are a guru and a Samaritan,

First, I would like to know if its 2014 in this forum like it is here in NJ. Second, I'd love to pick the brains of some Galaxy S5 people. Im assuming I'm in the wrong spot. If you are a guru and a Samaritan, please email me at (Removed)
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Apple does not give away its products.
Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
That is yet another FaceBook SCAM.

I would like some help in determining the proper structure/implementation

I would like some help in determining the proper structure/implementation for the following scenario:
I have ~10 steel rods that have been equipped with a strain gauge. The most I would have is ~30 steel rods.
Each setup has had a 10 point calibration done.
These steel rod/strain gauge setups are assigned a calibration number.
The data would be grouped for each steel rod and identified by the calibration number.
I would like to use that calibration data to determine the Young’s Modulus for each steel rod and store that within the specific rod’s information.
I want the user to be able to add new steel rods dynamically and the Young’s Modulus calculated and stored with it.
There are two different types of rods.
The cross-sectional area of the rod needs to be stored and that value is constant based on the rod type (so there are two different area values).
After a rod’s calibration data is entered the first time, the data should be static so it doesn’t need to be re-entered.
The user would enter the cal#, the 10 point calibration data, and the rod type.
The user will only see the steel rod cal# on the FP.
I am using a queue-based producer/consumer with event structure for the front panel interface. So I’m thinking whenever a rod cal# was added I would call a subvi where the calibration data can be entered and then the Young’s Modulus could be calculated and stored. An option to edit/review existing cal data should be available.
LabVIEW 2010, Win 7.
My initial idea was:
Rod Arr – array of clusters:
Rod Info - cluster:
Calibration number – string
Rod Scale cluster:
mV/V – double array
force – double array
Young’s Modulus – double
Rod type – enum
Cross-sectional area – double
I have not implemented this because I’m not sure how to implement that AND keep the data after it’s been entered. And all of the bundling/unbundling anytime I want to access/edit any rod information can be BD consuming. I thought a lookup table might work. When I looked on the forums for a lookup table I was pointed in the direction of arrays/clusters.
So I have two questions:
What would be the best structure for the steel rod data?
What would be the best data type for the calibration# that the user can edit (enum, ring, ?)?

I would make a couple of small change to your proposed data layout (highlighted in blue):
Rod Arr – array of clusters:
Rod Info - cluster:
Calibration number – string
Array of Rod Scale cluster:
mV/V – double
force – double
Young’s Modulus – double
Rod type – enum
Cross-sectional area – double
For the calibration data, I would have an array of clusters rather than a cluster of arrays. IMHO, this makes it easier to index through the calibration points, and makes it less likely you will ever have a situation where you don't have the same number of mV/V and force points. I'd also move the Young's modulus, type, and area info into the Rod Info cluster.
I prefer to store this type of configuration in the system registry, but that is more complicated and far from universal in the LabVIEW world. A simpler way would be to simply pass the entire array to the "write to binary file" function. If you do this, however, you might want to add a version number, otherwise it will be very difficult to maintain backwards compatibility if you ever need to change the data structure.
As far as the control type, it depends on what the user is entering. If the user is mostly entering calibration numbers already in the system, I would use a (system) combo box. This allows the user to select an existing calibration number from the menu, but also to enter a new calibration number if they need to. If the user will almost always enter new calibration numbers, then I would use a standard string control. Either way, you'll probably want to validate the format of the number the user enters.
Mark Moss
Electrical Validation Engineer
GHSP

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
Thanks in advance.

yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
sorry but even more products coming from China to Brazil in technical assistance.

Hi everyone I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise

I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise Thank You!!

There's no reason to install a smaller hard drive. In some cases, it may decrease performance.
Your MacBook Pro comes with a 5400 rpm hard drive, so what you can do is to install a smaller, 7200 rpm hard drive, so you will get a better performance. Any 2'5" SATA hard drive will work, but you can have a look at OWC for hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
HGST and Seagate hard drives have a good reputation, so you can purchase one of them

Business Analyst in BI domain and would like some pointers..

Hi
I'm new to the world of Business Analyst in BI domain and would like some pointers..
- What/who is Business Analyst in Business Intelligence / Analytics and what are the roles and responsibilities?
- What key skills/background/knowledge is needed to succeed in this area?
- How does a workday day of BA in BI domain look like?
Please point to study resources on this topic
Thanks in advance to the experts.
Best,
DeepB

try Attending this free webinar by Rishikesh Vakula, a seasoned Project Manager and business analyst , with more than 13 years of experience in various domains, to include, Defense, Telecommunications, E Commerce, Government And Banking & Financial to understand the future of BI
Please register here - http://www.corp-corp.com/blog/it-business-analysis/?aid=orbacceforum
Wednesday, August 24, 2011 - 06.00 u2013 7.00 P.M EST
Webinar Highlights
u2022     Expectations from Todayu2019s IT Business Analyst
u2022     Waterfall Vs Agile Business Analysis
u2022     Artifacts from an IT Business Analyst
u2022     Introduction to IT Project Scope and Scope Management
u2022     Domain Modelling & Requirement Gathering
u2022     Practical aspect of Requirement Gathering

To whom it may concern, Since I have downloaded the Firefox update for my phone. I have not been able to copy and paste. I would like some info on this. Thanks

With the previous version of Firefox for my mobile phone it had the gingerbread copy and paste system and now I am not able to do so at this point. I just want to know how to copy and paste with the new update version of Firefox for my mobile phone. I have a Samsung Infuse. I would like some input on this. Thank you and much appreciated.

Sorry, the new user interface in the latest update did not have selection/copying of text ready in time for its release. We're working on adding it back for an upcoming version very soon. If you'd like, you can already start testing it in our [https://wiki.mozilla.org/Mobile/Platforms/Android#Download_Nightly nightly development builds].

I don't know how to use touchsmart and would like some on line training. tell me how to access

I would like to use touchsmart but know nothing about it and would like some training.

The machine comes with a large number of tutorials that you can learn with.
Between that and the documentation that it ships with you should have more than a few days of new things to learn.

I would like to sell my G4. But first I would like to erase any information on the computer. How do I wipe it clean before selling?

I would like to sell my G4. But first I would like to erase any information on the computer. How do I wipe it clean before selling?

What OS version install disk sets do you have? ...OS 9.x, OS X 10.x...

My 6 year old made some charges on game apps and I would like a refund please

my 6 yr old made charges on my acct. playing games. I would like a refund please for I didnt authorize them.

Your chances are slim to none for getting a refund I think. You should just log out of the apps store and only log in when you want to purchase something.
Edit: Here are the refund policies: http://www.apple.com/legal/itunes/us/terms.html#GIFTS

Zone edit, my first attempt; would like some assitance please :P

Similar Messages

Maybe you are looking for