Zone is in state 'shutting_down', but zoneadmd does not appear to be availa

Hello,
I have a global zone with two local zones. One of the local zones has an issue where it got stuck in the "ready" state when its SAN device was not available.
This zone continues to hold onto it's SAN device (which has an I/O error), and I am unable to halt the zone, and cannot unmount the zfs partition (using "-f")
If I try to kill the zone-related processes for this zone, they do not die.
Any ideas on how to stop processes related to this zone (zsched, zoneadmd) and umount the zfs partition. "zpool list" shows the pool as UNAVAIL but the zone partition is still showing as mounted (df) and I can see files via "ls" -- no writing permitted... zfs list" does not show the device related to this zone -- but "df" does...
I would prefer to not have to reboot the global -- and the other local zone is running with no issues. Is there any way out of this situation where a device has an I/O issue and various processes are trying to access the device...
thanks in advance,
--Rebecca

UPdate: I am able to see the luns via a single path; so my zfs pools will work but without the redundancy of dual paths...
Please bear with me as I describe the problem.
There should be 4 paths to each lun, (via 2 HBAs, 2 physical host connections to the SAN).
I see for lun0 4 paths -- 3 are shown via luxadm display as accessing the same physical device -- but the device is listed as "Not Ready". The 4th path to the same WWN device is shown as "online" and that one is working. The lun1 has only a single "online" path -- no additional paths.
I do not have access to the SAN but I am told that all the zoning is correct for this host. The SAN storage is Clariion CX3-40.
The error message in /var/adm/messages associated with this is: Page83 data not standards compliant DGC LUNZ 0326
and there are also SCSI error messages related to this.
There are 2 other hosts that have this issue -- but in those cases there are multiple paths that are working.
SAN switches are brocades.
What might cause the same lun to have one working path on an HBA and one path with the device in the "Not Ready" state (visible but not readable or writeable)? The other physical connection has two paths in the "Not Ready" state.
Any ideas on what could cause devices to appear as "Not Ready" when in fact the real device is working? Or what to check on the SAN side. OR suggestions on how to fix.
I have done the following: exported the zfs pools; unconfigured all devices via cfgadm -c unconfigure; validated all devices are gone from /dev/*dsk; then re-created. I also tried "boot -r" which I did not expect to fix the problem and it did not. Is there anything else to try on the host side that might shed more light on where the problem lies?
(Note: we have many hosts with this <same> configuration -- 2 HBAs connected; 4 working paths shown.)
thanks much for any assistance,
--Rebecca                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Similar Messages

  • I can create a New Folder, but it does not appear under my 'Inbox'.

    I have made sure that under 'View', that my bullet is next to show 'All' folders. I make the new folder to show up as a subfolder of my inbox, but it does not appear. I try to do it again and it states that one already exists????????????????????????
    I cannot figure out what is Wrong!!!!!!!
    Jackie

    OMG - thank you for your help!!!!!!!!!!!! I did not realize that the inbox folder was collapsed and not expanded. The new folders I made are there!
    THANK YOU!!!!!!!!!!!!!!!!

  • HT201342 I have set up my iCloud email address on my iPhone and iMac but it does not appear on my iPad.  Dies anyone else have the same problem?

    I have set up my iCloud email address on my iPhone and iMac but it does not appear in my iPad?  Any suggestions?

    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team..

  • When an image is inserted here using clipboard, it appears in the editor, but it does not appear in

    when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works

    Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
    However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
    For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
    From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
    For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
    Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
    So let me please advise you for the next time:
    - to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
    - think twice before answering and try to figure out how such answer might be percieved
    - try to do less posts, but with higher quality
    - try to employ more politeness and correct behaviour
    - approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
    With regards
    Lukas Plachy
    Misstypes corrected by rheingold.

  • Pdf file shows open but document does not appear on monitor

    Using Illustrator CS2 for pdf documents. Have a few files created with CS2 that show as being open in the Tool Bar "Window" but document does not appear on monitor.

    Try Ctrl-Y for preview.

  • HT1390 I downloaded a movie but it does not appear in my movie folder

    I downloaded a movie from iTunes (confirmed that my account was charged for it) but it does not appear in my iTunes library.  (I have done this before - the movie automatically appeared in my Movies folder the last time.  This time, it did not.)

    Phil0124 wrote:
    Tap on this icon:
    All Downloaded movies and shows will appear there.
    Yes. I know where downloaded movies can be found. And the question has already been marked as solved.

  • I had to delete my OliveApp for Olive04HD yesterday but now it does not appear to be available to reinstall

    I had to delete my OliveApp yesterday but now it does not appear to be available to reinstall from the app store

    Hi Rachel,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Judy

  • I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?

    I am using Window 7 I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?
    It does appear on a friend's computer using Firefox.
    Barossa Vintage Festival ... this is the missing link on my computer just under the link named ... Autumn photo collection

    No problems here with the tree links:
    View photos
    Friends gather for breakfast
    Friends take an Autumn drive
    Photos of the Barossa Festival
    Reload the web page and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • I downloaded the ebates shopping toolbar and wish to remove it but it does not appear in my list of add ons or plug ins. I have just now downloaded the newest version of Firefox.

    I downloaded the ebates shopping toolbar and wish to remove it but it does not appear in my list of add ons or plug ins. I have just now downloaded the newest version of Firefox.

    I am not able to remove the ebates tool bar because it does not appear when i go to tools then addons or extentions or plugins. Where is it?

  • I create pdf but it does not appear on screen

    I create the pdf correctly, but it does not appear on the screen. Time ago always appeared and the I decided if I wantet do print, save or send by email, but now the only thing I can do is to save.
    How do I solve this problem?

    On the main page of the export screen there is a button that says 'View PDF sfter exporting' or something like that.  Tick that and you'll be aways, remember it's a 'sticky' setting so should stay like that until you change it yourself.

  • I want to uninstall but it does not appear in Add/Remove Programs

    I use Firefox 2.0.0.12. When I accessed today I was aked to install an update, now the thing won't even start up. Message is "firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. " I have been on your help site and am told to uninstall it, but it does not appear in Add/Remove Programs list. How can I uninstall it?

    I found an uninstall file in the Mozilla firefox program files and successfully uninstalled the old version of firefox. I have now installed v3.6.13 and all seems OK. Does anyone anticipate any other problems?

  • I own a PDF EXPORT, but it does not appear on Acrobat DC

    I own a PDF EXPORT, but it does not appear on Acrobat DC

    We need to know what Mac you are using and what version of OS X, then we can get your question transferred to the correct forum.

  • Ihave a movie stuck in itunes on ipad for 3 weeks taking up 7 gigs.I deleted it from the videos app but it is still there.I also tried deleting from itunes on the pc but it does not appear there.Thanks

    Ihave a movie stuck in itunes for 3 weeks taking up 7 gigs of memory.I deleted it from the videos app but still remains on the ipad.I also tried deleteing it from itunes on the pc but it does not appear there.Dont want to reboot the ipad if possible .Thanks

    That list includes all the apps that you installed to your device directly from iTunes on the computer, or which were purchased on the iOS device and subsequently transferred to iTunes on the computer.
    If you right click on any item in that list and choose "Show in Windows Explorer" it will open your iTunes application installer directory on your computer, which should be:
    C:\Users\User\Music\iTunes\iTunes Media\Mobile Applications
    In there are all your saved application installers (*.ipa files).  You need to delete those actual installer bundles and then make sure to NOT allow the "transfer purchased content" when you sync or backup in iTunes (as that will just put them back on your hard drive).
    One caveat to removing those, is that if you ever wish to keep a specific release of a particular app, and the developer replaces the iTunes/App store version with something else, your sole source for your older version will be your own stored copy of it.  So for example, when PDF expert released their iOS 7 update, and charged everyone full price for it, if you wished to keep using the previous version on your own devices, then you needed to keep a copy of the installer on your own computer as that older version is no longer available in the store front.

  • I purchased an ebook with my ipad but it does not appear on my iphone 4 even tho I use the same icloud account

    I purchased an ebook with my ipad but it does not appear on my iphone 4 even tho I use the same icloud account

    connect your ipad to itunes and click on the ipad and go to its app tab on the list check if pages name is checked or not if not check it and try syncing again it will install the app

  • HT2480 My e-mail, exchange account, on iphone, displays an out of date signature.  My Outlook displays the correct signature but this does not appear to have replicated to my iphone.

    My e-mail, exchange account, on iphone, displays an out of date signature.  My Outlook displays the correct signature but this does not appear to have replicated to my iphone.  The standard signature still says "sent from my iphone" which is fine but I need desperately to change the exchange signature as the office address is incorrect.

    I have already tried that and this doesn't work.  The signature is pulling incorrectly from exchange but I don't know how.

Maybe you are looking for

  • Itunes/external hard drive issue - i cant find the answer anywhere

    okay so here it is: i am currently using an imac g5 (v. 10.4.8) and i just got a g-drive to store my music onto. i am using a 400 firewire cable and i have tried a few different methods to copy my music files to the drive (methods are listed here) bu

  • Windows 7 how do i make a image ?

    Hi After microsoft desided to make a totaly mess out of evrything with syspreping and windows 7 iam soooooo stuck if i use MDT and AIK i can make my self a bootable wim file and pull image fra server via fileshare BUT that i dont want i want to use N

  • My ipod 5th gen doesnt charge or turn on

    My ipod 5th gen doesnt charge or turn on. There is no damage to the ipod, i have tried resetting it, connecting to itunes and troubleshooting but no luck. When charging the ipod gets warm but still wont turn on or charge. Can anyone help please?

  • Oracle in Windows Server 2008 R2 Itanium Based System IA64

    Hi, I tried to install Oracle in Windows Server 2008 R2 for Itanium Based-System (IA64) with no luck, I tried with Oracle 10g version for Itanium but it shows a DOS screen and then it closes, then i wondering if anyone knows if is possible to install

  • Losing leading 0 in zip when importing from .csv

    I'm trying to open a .csv file with names and addresses. It all works except the zip code field is treated as a number, and the leading 0 is stripped off. How can I prevent that?