Zone setup in solaris 10 some problem and doubts

Hi Experts
I have small problem and doubt
If i login to global zone ... "zlogin -C -e @ testzone" how to logout from global zone......
testzone# when i press exit button it is comeing to zone login prompt
zone1 console login: @ ( from Zone login prompt i want to come
back to my normal solaris prompt i tried with pressing "shift+@ "
nothing is happening could you please tell me how to come out from zonelogin prompt ................
one more query after installation we are using " zlogin -C -e testzone "
is it rquire this same login commmand we have to use every time or only one time after installation of zone. we can use
"zlogin testzone " also what is difrrent these two... if you use " zlogin -C -e testzone " then only it will prompt for locale and language settings......
i have seen it is asking for locale setting and language ...... and it is asking only one time but if you use "zlogin testzone" it won't ask any such seetings......( only one time it will ask after the zone configuration)
Thanks
RK

This particular forum is for issues with applications, daemons
and applets that provide reports to you about a system state or condition.
Sun Remote Servies and Net Connect, are some of those reporting services
that you would subscribe to from Sun Support.
This is NOT a forum for you to report about an issue.
None of your postings, thus far, are within the scope of this particular forum.
For example, this latest thread would be better suited in the forum for Solaris Zones.
Put some planning into your posts and place each one into its appropriate place.

Similar Messages

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

Some problems and questions using OWB

For Igor or anyone who can help me :-)
Hello Igor,
Thanks for all your help concerning my mapping deployment problem! Now its working better ;-)
I used the OWB Runtime Assistant to create a new runtime target schema and i use the owner of this schema as user while logging to OWB.
Now i can create and deploy without problems mappings, tables, functions, procedures, packages, dimensions, views, materialized views, process flows (i have installed the Oracle Workflow Client 2.6.2.0.0 with OWF builder and OWF mailer ).
However I have still some problems and questions :-)
a) After deploying a mapping or process flow i can execute them from OWB Deployment Manager. How can i schedule the execution of a deployed precess without using OWBDM ? (I want to execute a process every day to perform ETL).
b) I think i have a problem deploying cubes. I create a cube in OWB, the validation is OK, the deploment succeds, but if i look with OEMC in the tree in the Warehouse OLAP section no cube is created. Only the fact tabe is created. If i look to the scripts from the Pre Deployment generation results i found DDLs only for TABLE, INDEX, UNIQUE KEY, FOREIGN KEY and ANALYZE object types, meanwhile during a dimension deployment i found also a DDL for the DIMENSION type object. WHY ?
c) If I look in the procedures of the new created OWB Runtime Target Schema I found 3 procedures which are in error and when I try to compile them I receive the following error messages :
- procedure WB_OLAP_LOAD_CUBE
PLS-00201: identifier 'DBMS_AWM.CREATE_AWCUBELOAD_SPEC' must be declared
- procedure WB_OLAP_LOAD_DIMENSION
PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
- procedure WB_OLAP_LOAD_DIMENSION_GENUK
PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
How can solve this problem? Is there any link with the fact that the cube is not generated?
d) When I first acces the deployed DIM in the OEMC tree I receive a message saying that the dimension does not have complete metadata as needed for use by Oracle OLAP services (because is created either in an earlier version of Oracle database or it was created by an an other application than OEMC) and OEMC automatically generates the default needed metadata. Is this normal ?
I work in an environment with
- Oracle 9i Database 9.2.0.1.0
- Oracle 9i Client 9.2.0.1.0
- Oracle 9i Warehouse Builder Products 9.2.0.2.8
Best Regards:
Vlad
PS Sorry for my poor English ;-)

Answered in your "Getting RPE-01008 when deploying mappings" post.
Regards:
Igor

Some problems and questions

I have some problems and questions about my MSI MEGA PC 180 system...
One problem is that MSI live monitor only works one time after every new installation then is just say "The URL is invalid" every other time I try to search for updates.
One problem is that one of the fans doesn't turn off when I turn of the computer and the only way to get i to turn off is to turn on the hifi mode and turn it off then the fan stops. And some times the fan can start after a while when the computer has been turned off.
There are two fans for the cooling of the CPU but PCALERT only shows the speed of one of them.. why? according to the manual one of the is called CPU fan and the other one is called sysfan but only CPU fan showes i PCALERT.
Are there no other way to control the Tv other than with the Home Teather system than I find way to slow if you use 1280x1024 resolution on the screen like I do. And are there no way to sort and remove channels in home teather? As i is now I can't move the channels in the order I want and I can't remover channels that the auto search thaught was channels but aren't?
An other thing that I find annoying is that the fullscreen mode of home teather doens't cover all off the screen it doesn't hide the systray and leaves a small but annoying kolumn to the right that showes the backgrund and that is very annoying to watch tv if you have a light backgrund because the kolumn are so bright.

Welcome Kabbo,
I see you agree that MC III is far from perfect. Perhaps you can try the combination of Media Portal and Ir2Key. Just read some of the other posts including "WinIRX.ocx internals/usage" by ddookie. Another possibility is to try Dscaler, but this program is only for watching TV.
Regarding the processor fans: its normal that only one of the two shows up in PcAlert; when you look closely to both fans you'll see that one has only a two-wired connection.
The problem of a fan not shutting down is new to me, I suppose you have checked the connections to your mobo?
Greetz,
JaDi

HT5622 Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?

Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?

This is primarily a user-to-user support forum. You can report a billing problem at https://reportaproblem.apple.com or contact iTunes support at https://getsupport.apple.com/Issues.action

I am being plagued by that infamous "heap zone" error, can someone perform some magic and fix this for me?

Last night I tried to save an iMovie project that was a little over 5 minutes long, minimal transistions, moderate effects, minimal text, and some pictures and music. I have been attempting to export it at 1080p to a folder on my HD but I keep getting the heap zone error. What I don't get is a week ago I was able to export a very similar project about 4 and half minutes with no problem.
The basic specs of my Macbook Air (mid 2011 model, 11-inch running OS X 10.7) are: 120GB solid state hard drive, 4 GB of RAM, and a 1.6 GHz Intel core i5 processor. I currently have available around 13GB of storage left on the main drive, and I have an external connected (paired with Time Machine). Now, I have been researching this problem all last night and all this morning and several of the known "solutions" have not worked for me. Looking in my Activity Monitor it seems whenever I try to export this project through iMovie, the "Free" RAM just progressively drops until it hits about 450MB of RAM and then I get the heap zone error message. and while I have been able to free up about 2.5Gb of RAM prior to exporting the project, it still manages to eat up all but 400-500Mb and then gives me the error. I'm pretty lost at what to do. Here's what I've tried so far:
- First instinct, restarted the computer
- Closed out most of my usually running programs
- Used the "Purge" command in terminal to free up 'Inactive' RAM (though it only free'd up a little bit, it always stops at 400Mb)
- Downlaoded a Cache Cleaner and did a 'medium' cleaning of local and system cache
- Turned off Time Machine
- Tried saving to my external drive instead of the main one (so obviously it's not a storage issue)
- Eliminated the use of special characters from the title
- Closed all processes in the Activity Monitor that weren't vital or being run by the system
None of those worked and I consistently got the heap zone error at the same point, about 1/10 of the way through in 'Preparing Project' Is there any other solutions to this problem? Preferrably ones that don't involve, deleting significant files or items from my drive, re-installing the OS, or any other drastic system changes because afterall my system hasn't drastically changed in the past week that iMovie WAS working so this has to be a simple fix.
I'm really just getting annoyed and fed up with this so PLEASE someone have the right answer.

Hi
This is a complex Error - so this is the notes I've got - so far
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck
Yours Bengt W

My iPhone 5 the speaker probably doesn't work, I feel upset because my friends said to me don't buy it because the software of iPhone 5 have some problems and I didn't listen to them , now I would like to see how apple will help me !!!!!

The speaker of my iPhone 5 probably doesn't work and I don't know the reason although some of my friends said to me don't buy it because the software of iPhone 5 have some problems but I didn't listen to them

Check this support document for SIM issues http://support.apple.com/kb/TS4148. No one here is Apple, we are users like you. We can only recommend you try Apple again, unless you are close to an Apple store and can make an appointment to go in there.

Resizing and editing Components Design - Some problems and questions at CQ5

Hello everyone,
I'm building a website application following the http://dev.day.com/docs/en/cq/current/howto/website_quick.html guide (using the cq 5.5). The thing is, when I drop an image component on the site and drop some image into this one, the component resize my image. Even if I double click the image component and change the size, there's kind of a "maximum" size. I don't wanna change this one by css properties because if my user change the picture or drop a new one in the page, the change will not be applied to this new one.
So, my question is, there's a way to configure the component to get the size i'm inputing on the dialog, without "limits"? Below some images of what i'm doing.
The second problem I found is with the "text & image component". I've inserted the "right" alignment for the image in the styles tab, but the image stays on top of the text, and there's nothing I can do to solve this in the input dialog. Don't wanna use the css for the same reason that I've explained before.
All the components are imported from fundation.
So, there is something I can do to change the design of my components?
Thanks in advance,
Matheus de Oliveira.

For the issue you are having with the maximum size there are couple of possiblity.
The firstpossiblity is that your CSS is enforcing a maximum size. So to check this take the src from you img tag and put in a browser and see if you get the original size or not. If you get the right size when viewing the image URL than you do in the page than the issue is CSS. Depending on how you have designed your site's CSS there might be any number reasons it's limiting the image size but whatever the reason it's an implementation question.
The second option is that design mode of the image component. The default install has a maximum image size set in design mode of the image component. Switch your page to design mode and verify that the maximum image size is not set in the design dialog.
A final option is that the DAM is enforcing the maximum size. In CQ 5.5 the default configuration is to create a web ready rendition with a maximum height and width fo 1200 x 1200. The out of the box components and the out of the box image rendering script will use this web ready rendition if it is present rather than the original image.
To check if this is your problem do the following:
Go to the workflow model console and edit the Update Dam Asset workflow.
Delete the step in the workflow named Web Ready Rendition
Upload a new image that is larger than 1200 x 1200 to the DAM
Try and use that image in an image component - it should display at the original size.

Some problems and dubts with my Curve 8520

Sorry, my English language is not good but i hope i'll explain the problem in the right way.
1- I have facebook already installed on my phone... it works well but yesterday evening it is blocked in update! I don't know how to stop the updating... i cannot use Facebook.... How can i do?
2- I'd like to download some application on my device, but i have to download AppWorld before... is it free? Can i pay something? Is it possible to download it on Pc and after transport it on my 8520?
3- If i download an application on payment... how can i stop it and don't pay it?
4- Is it possible to receive email notification of replies of this question?
My English is not very well, sorry. I ask you to explain all in the simply way as possible.
Thanks

Hi madison80,
Welcome to the BlackBerry Support Community.
Regarding the issue you are having with Facebook® for BlackBerry® smartphones, does reinserting the battery stop the application trying to update? If so, please try to uninstall the application then reinstall it and test again.
BlackBerry App World™ storefront is a free application, however it requires a data plan with your wireless provider as does Facebook for BlackBerry smartphones.
I'm not sure what you mean by stopping a paid application. Can you please clarify your question?
Regarding your last question on email notification of replies, are you referring to notifications of replies to this post? If so, you can set this up in your account settings.
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

I have some problems and queries on Q10 ...

Good morning ...
First, BBM very bad design, and the blue color of the broadcast very tired of the eye , and device does not vibrate when you work Ping!!! .
Second, Android applications that are supported by BlackBerry 10 does not work well and often cause a lot of problems.
Finally, we await descent of a new update to the Software 10, taking into account the support of more fonts, and more applications, and support the Arabic language more, and attention from RIM.
thank you...

Try reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If no joy, restore backup using iTunes.
Finally last attempt, rsetore as new and sync content back manually.

I had to get a new account on my iPhone due to some problems and now with my new account it will not let me download the same apps

I have an Iphone 5 and i had all the apps on there that I wanted but then had to create a new account for the phone. I cant do the updates becuase of not having the same account I downloaded them on. So when I try to delete them and then get them again it says that it was already downloaded to this device and that I need to do it through my old account when that one is deleted.

You need to copy the iTunes liubrary from your Old computer, or its Backup, to your New computer...
See Here for one way
iTunes: How to move your music to a new computer
Or...
From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
An Added Bonus is that you will then have a Backup of iTunes...

Big problem (and doubts) with binding performance

In a JavaFX mobile application I'm developing, I have a sequence of objects and a simple form with a text field and a list of items. The list of items must be populated with the sequence; as the user types in the text field, the list gets filtered properly.
This worked perfectly with some mock data (a handful of items), but it's really a disaster after I've tried to throw in real data (1000 - 2000 elements). I don't know whether it's a bug of JavaFX, a bug of mine, or if binding must not be perused. Before posting the code, there's some guideline I should be aware of, such as the max. feasible size of a sequence?
BTW, I must say that I'm not even able to get a JSON file through a parser, instantiating objects and adding them to a sequence. It's painfully slow and basically I can't even see its going on after about 100 elements.

Now, the relevant part of the controller.
package it.tidalwave.bluebillmfx.taxon.controller;
import javafx.animation.Timeline;
import javafx.animation.KeyFrame;
import it.tidalwave.bluebillmfx.taxon.model.Taxonomy;
import it.tidalwave.bluebillmfx.taxon.model.Taxon;
public class TaxonomyBrowsingScreenController
    public var selectedTaxon: Taxon;
    public var taxonomy: Taxonomy;
    public var filter: String = "";
    var leading = "";
    function matches (taxon : Taxon, string: String) : Boolean
        def m = (string == "") or taxon.displayName.toLowerCase().startsWith(string.toLowerCase());
        println("matches({taxon}, *{string}*) => {m}");
        return m;
    public var filteredSpecies = bind taxonomy.species[species|matches(species, filter)] on replace
        println("trigger begins");
        leading = commonRoot(filteredSpecies);
//        println("Selected {userInput} -> {filteredSpecies}");
        if ((leading != "") and (filter != leading))
            println("ROOT: {leading}");
        if (sizeof filteredSpecies == 1)
            selectedTaxon = filteredSpecies[0];
            println("SINGLE SELECTION {selectedTaxon}");
        else
            selectedTaxon = null;
        println("trigger ends");
}Edited by: Fabrizio.Giudici on May 21, 2009 1:42 AM

Firefox have some promlems and it block when is opeining hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

Firefox have some problems and it block when is opening hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

HP ENVY 4500 creates its own SSID on my WiFi network causing problems and confusion

I am finding this problem hard to articulate clearly and I can’t find any information on the internet about why my new HP Envy 4500 printer has set itself up with its own SSID on my WiFi network, but here goes :
I bought an HP Envy 4500 all in one printer for my daughter’s room in university, which has a WiFi network with WPA security. First I tried to add this printer to the room WiFi using the printer menu, but it gave an error stating that the WPA passkey format was incorrect, when in fact it was the correct password. So instead I had to install the printer using the installation options accessed from the HP website using her laptop.
This has worked, but it has also set the printer up with its own independent SSID called ‘HP-Setup-45-ENVY 4500 Series’. This separate SSID for the printer is causing some problems and does not seem to have any useful purpose. For example sometimes documents randomly will not print from the laptop, but if you then disconnect the laptop from the room SSID and reconnect it to the printer SSID, the documents will then print, but then you have to reconnect to the room's SSID when done. This is confusing and of course completely unwanted behaviour.
Does anyone know why this new SSID called ‘HP-Setup-45-ENVY 4500 Series’ has been set up for the printer please? Can I get rid of it so that printer is simply a device connected on the WiFi network in the room please?
I hope this makes sense as this a very frustrating issue for something that should be completely straightforward.
Thanks.
This question was solved.
View Solution.

Go into the printer settings and disable Wireless Direct. Done.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Setup.exe has encountered a problem

Hello,
I am trying to setup Oracle 10g Vmware on Windows XP SP2. I extracted the zip file and am running setup.exe. It opens up two DOS windows in background and then i get an error
"setup.exe has encountered a problem and needs to close".
Any help is greatly appreciated.
Thanks in anticipation.

error was caused by running setup.exe from too deep subfolders..
resoolved by running it from C:\Disk1\xxx

Zone setup in solaris 10 some problem and doubts

Similar Messages

Maybe you are looking for