Zoneinfo bug for Asia/Yekaterinburg and others

Hi!
I've just discovered that zoneinfo has incorrect or missing DST settings for most of russian cities up until 31 March, 1981. For example, mktime(3C) returns GMT when tm_isdst flag is set to 1, and other values point to time before 01 Apr 1981. However, after that date mktime returns correct values (GMT+5 during summer period, GMT+4 during winter). Using mktime with tm_isdst set to 0 or -1 provides correct results, but such values assume that DST adjustment will not be applied.
Problem applies to Asia/Yekaterinburg, Asia/Vladivostok, Europe/Samara zones (not yet tested others). Problem does NOT apply to Europe/Moscow zone.

$ uname -srvmp
SunOS 5.9 Generic_118558-26 sun4u sparc
$ cc -V
cc: Sun C 5.8 2005/10/13
That's my system.
Are there any solutions for this problem?

Similar Messages

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

Is it ok to buy students version and use it mainly for University .. and sometimes i use it to design (logo, Poster, etc ..) for my friends and other peoples

Is it ok to buy students version and use it mainly for University .. and sometimes i use it to design (logo, Poster, etc ..) for my friends and other peoples ?
i care really about this small details

Hi There,
Yes, yon can use if you personal as well as commercial use.
For more info check : Education FAQ
Thanks,
Atul Saini

Is the MacBook Pro good for The Sims3 and other versions of that game

Is the MacBook Pro good for The Sims3 and other versions of that game

i have an early 2011 15" MBP and it runs the Sims 3 just fine. I do not have any of the expansion packs for the game but as long as your MBP meets the minimum requirements you should be just fine

Any setting to use alt+tab for switching adobe and other file ?

any setting to use alt+tab for switching adobe and other file ? instead of opening a adobe file agin and agin?
thanks.
really hate using win8...........................

i mean ..can adobe fild open it in a normal way like win7 did...
so i can use alt+tab to switch task easily..

Cannot update my keynote, pages and numbers from my ipad. I have different accounts, one for app store and other for icloud. What can I do?

Cannot update my keynote, pages and numbers from my ipad. I have different accounts, one for app store and other for icloud. What can I do?

You can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
Use your iCloud ID for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

Troubles with Creative Cloud panels. No panels for download, socials and other...

No panels for download, socials and other...

Hi Antopus,
Please quit creative cloud app. Then perform below given steps:
Remove the delete OOBE file and re-login into the Creative Cloud desktop application using the Adobe ID tied to your subscription.
Mac OS: You can locate the OPM.db file in the \User\<user name>\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion.
Windows: You can locate the OPM.db file in the \Users\<user name>\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7.
Please, let us know how it goes.
Thanks & Regards,
~Sanjeeta

Hi, Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other thing

Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other e mails I wanted to keep.

can you provide a bit more info before you do anything.
I'm presuming this is a pop mail account - please confirm.
First, make sure hidden files and folders are visible:
The AppData folder is folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
* Help > Troubleshooting Information
* click on 'show folder' button
* click on 'Mail' folder.
* Please post image of the contents of the 'Mail' folder.
In thunderbird:
* right click on mail account name and select 'Settings'
* Select 'Server Settings' for the mail account
* Look bottom right for 'Local directory'.
* Put mouse cursor in the text box, then use keyboard arrow keys to navigate to the far right..some of the directory will be hidden as it does not fit it all in, so keep going to the right until you reach the end.
* Then left click, hold down and move mouse to the left to highlight the entire entry.
* Right click on highlighted area and select Copy.
* Paste info into this question in the forum.

Can I enable pof serialization for one cache and other JAVA serialization

I had coherence cluster with few cache , Is there any way i can enable pof serialization for one cache and other to use normal JAVA serialization

839051 wrote:
I had coherence cluster with few cache , Is there any way i can enable pof serialization for one cache and other to use normal JAVA serializationHi,
you can control serialization on a service-by-service basis. You can specify which serializer to use for the service with the <serializer> element in the service-scheme element corresponding to the service in the scache configuration file.
Be aware, though, that if you use Coherence*Extend, and the service serializer configuration for the proxy service does not match the serializer configuration of the service which you are proxying to the extend client then the proxy node has to de- and reserialize the data which it moves between the service and the client.
Best regards,
Robert

How to get sum of bugs for particular Mnth and particular Year dynamically?

Hi All,
I've a query related to dynamic date and year :
select bug_id,
category,
count(*) Total_bugs,
SUM(CASE when bug_date >= '10/1/2011' and bug_date <= '10/31/2011' Then 1 else 0 end) OCT_11,
SUM(CASE when bug_date >= '9/1/2011' and bug_date<= '9/30/2011' Then 1 else 0 end) SEP_11,
FROM AA_BUG_TBL
GROUP BY BUG_ID,BUG_CATEGORY
In the above query,Can we write one sum statement to get sum of bugs for a particular month and particular year dynamically?
for ex:2 bugs between 10/1/2011 and 10/31/2011 then 2 under oct_11
5 bugs between 09/01/11 and 09/30/2011 then 5 under sep_11
In this case we need to calculate correct no of days for feb
Thanks,
Mahender.

So...
You need to iterate based on something like the month, quarter, year... Then query on that. I'll use a "WITH" clause to illustrate:
with my_bugs as
    select bug_id
         , bug_date
         , case when to_char ( bug_date, 'QYYYY' ) = '12009' then 1 else 0 end y2009q1_bug
         , case when to_char ( bug_date, 'QYYYY' ) = '22009' then 1 else 0 end y2009q2_bug
         , case when to_char ( bug_date, 'QYYYY' ) = '32009' then 1 else 0 end y2009q3_bug
         , case when to_char ( bug_date, 'QYYYY' ) = '42009' then 1 else 0 end y2009q4_bug
         , case when to_char ( bug_date, 'YYYY' ) = 2009 then 1 else 0 end y2009_bug
         , case when to_char ( bug_date, 'YYYY' ) = 2010 then 1 else 0 end y2010_bug
         , case when to_char ( bug_date, 'YYYY' ) = 2011 then 1 else 0 end y2011_bug
         , case when 1 = 1 then 1 else 0 end is_bug_flag
      from bugs
select bug_id
       , bug_date
       , sum   ( y2009q1_bug ) over () as total_bugs_2009q1
       , sum   ( y2009q2_bug ) over () as total_bugs_2009q2
       , sum   ( y2009q3_bug ) over () as total_bugs_2009q3
       , sum   ( y2009q4_bug ) over () as total_bugs_2009q4
       , sum   ( y2009_bug   ) over () as total_bugs_2009
       , count (*)             over ( partition by is_bug_flag ) as total_bugs
    from my_bugsI mocked up some data so my results will be drastically different than yours but here are the results:
    BUG_ID BUG_DATE TOTAL_BUGS_2009Q1 TOTAL_BUGS_2009Q2 TOTAL_BUGS_2009Q3 TOTAL_BUGS_2009Q4 TOTAL_BUGS_2009 TOTAL_BUGS
      2014 10-SEP-10                 0                 0               114              1143         1257         10000
      2015 14-APR-10                 0                 0               114              1143         1257         10000
      2016 30-NOV-09                 0                 0               114              1143         1257         10000
      2017 03-JUN-11                 0                 0               114              1143         1257         10000
      2018 29-DEC-10                 0                 0               114              1143         1257         10000
      2019 12-JAN-11                 0                 0               114              1143         1257         10000
      2020 21-APR-10                 0                 0               114              1143         1257         10000
      2021 12-JAN-11                 0                 0               114              1143         1257         10000
      2022 29-NOV-10                 0                 0               114              1143         1257         10000
      2023 20-JUL-11                 0                 0               114              1143         1257         10000
      2024 04-MAR-11                 0                 0               114              1143         1257         10000

Super 1.5 - source code level tracing for EJB, JSP and others

Would you want to try new installation for Super 1.6?
Please visit www.acelet.com
Thanks.
"Dominique Jean-Prost" <[email protected]> wrote:
If only your installation tool was easy to use ...
dom
"Wei Jiang" <[email protected]> a écrit dans le message news:
[email protected]...
Super supports source code level tracing for Java and JSP!
Announcement: Super 1.5 - an EJB/J2EE monitoring tool with
SuperPeekPoke
SuperLogging
SuperStress
SuperEnvironment
It is free for development.
You can anomyously down load it from:
http://www.acelet.com.
Super is a component based administration tool for EJB/J2ee.
It provides built-in functionality as well as
extensions, as SuperComponents. Users can install
SuperComponents onto it, or uninstall them from it.
Super has the following functions:
* A J2EE/EJB monitor.
* A gateway to EJB servers from different vendors.
* A framework holding user defined SuperComponents.
* A PeekPoke tool to read/write attributes from EJBs.
* A full-featured logging/tracing tool for centralized, chronologicallogging.
* A Stress test tool.
* A global environment tool.
It is written in pure Java.
The current version support:
* Universal servers.
* Weblogic 5.1
* Weblogic 6.0
What is new:
Version 1.50 August, 2001
Enhancement:
1. Source code level tracing supports EJB, JSP, java helper and other
programs which are written in native languages (as long as you
write correct log messages in your application).
2. Redress supports JSP now.
3. New installation with full help document: hope it will be easier.
4. Support WebSphere 4.0
Version 1.40 June, 2001
Enhancement:
1. Add SuperEnvironment which is a Kaleidoscope with TableView,TimeSeriesView
and PieView for GlobalProperties.
GlobalProperties is an open source program from Acelet.
2. SuperPeekPoke adds Kaleidoscope with TableView, TimeSeriesView andPieView.
Changes:
1. The structure of log database changed. You need delete old installationand
install everything new.
2. The format of time stamp of SuperLogging changed. It is not localedependent:
better for report utilities.
3. Time stamp of SuperLogging added machine name: better for clusteringenvironment.
Bug fix:
1. Under JDK 1.3, when you close Trace Panel, the timer may not bestopped
and
Style Panel may not show up.
Version 1.30 May, 2001
Enhancement:
1. Add ConnectionPlugin support.
2. Add support for Borland AppServer.
Version 1.20 April, 2001
Enhancement:
1. Redress with option to save a backup file
2. More data validation on Dump Panel.
3. Add uninstall for Super itself.
4. Add Log Database Panel for changing the log database parameters.
5. Register Class: you can type in name or browse on file system.
6. New tour with new examples.
Bug fix:
1. Redress: save file may fail.
2. Install Bean: some may fail due to missing manifest file. Now, itis
treated
as foreign beans.
3. Installation: Both installServerSideLibrary and installLogDatabasecan
be worked
on the original file, do not need copy to a temporary directory anymore.
4. PeekPoke: if there is no stub available, JNDI list would be emptyfor
Weblogic5-6.
Now it pick up all availble ones and give warning messages.
5. Stress: Launch>Save>Cancel generated a null pointer exception.
Changes:
1. installLogDatabase has been changed from .zip file to .jar file.
2. SuperLogging: If the log database is broken, the log methods willnot
try to
access the log database. It is consistent with the document now.
3. SuperLogging will not read system properties now. You can put logdatabase
parameters in SuperLoggingEJB's deployment descriptor.
Version 1.10 Feb., 2001
Enhancement:
1. Re-written PeekPoke with Save/Restore functions.
2. New SuperComponent: SuperStress for stress test.
3. Set a mark at the highlighted line on<font size=+0> the Source Code
Panel (as a work-a-round for JDK 1.3).</font>
4. Add support for WebLogic 6.0
Bug fix:
1. Uninstall bean does physically delete the jar file now.
2. WebLogic51 Envoy may not always list all JNDI names. This is fixed.
Version 1.00 Oct., 2000
Enhancement:
1. Support Universal server (virtual all EJB servers).
2. Add Lost and Found for JNDI names, in case you need it.
3. JNDI ComboBox is editable now, so you can PeekPoke not listed JNDIname
(mainly
for Envoys which do not support JNDI list).
Version 0.90: Sept, 2000
Enhancement:
1. PeekPoke supports arbitrary objects (except for Vector, Hashtable
and alike) as input values.
2. Reworked help documents.
Bug fix:
1. Clicking Cancel button on Pace Panel set 0 to pace. It causes
further time-out.
2. MDI related bugs under JDK 1.3.
Version 0.80: Aug, 2000
Enhancement:
1. With full-featured SuperLogging.
Version 0.72: July, 2000
Bug fix:
1. Ignore unknown objects, so Weblogic5.1 can show JNDI list.
Version 0.71: July, 2000
Enhancement:
1. Re-worked peek algorithm, doing better for concurent use.
2. Add cacellable Wait dialog, showing Super is busy.
3. Add Stop button on Peek Panel.
4. Add undeploy example button.
Bug fix:
1. Deletion on Peek Panel may cause error under JDK 1.3. Now it worksfor
both
1.2 and 1.3
Version 0.70: July, 2000
Enhancement:
1. PeekPoke EJBs without programming.
Bug fix:
1. Did not show many windows under JDK 1.3. Now it works for both 1.2and
1.3
Changes:
1. All changes are backward compatible, but you may need to recompilemonitor
windows defined by you.
Version 0.61: June, 2000
Bug fix:
1. First time if you choose BUFFER as logging device, message willnot
show.
2. Fixed LoggingPanel related bugs.
Version 0.60: May, 2000
Enhancement:
1. Add DATABASE as a logging device for persistent logging message.
2. Made alertInterval configurable.
3. Made pace for tracing configurable.
Bug fix:
1. Fixed many bugs.
Version 0.51, 0.52 and 0.53: April, 2000
Enhancement:
1. Add support to Weblogic 5.1 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Context sensitive help is available for most of windows: pressF1.
2. Fix installation related problems.
Version 0.50: April, 2000
Enhancement:
1. Use JavaHelp for help system.
2. Add shutdown functionality for J2EE.
3. Add support to Weblogic 4.5 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Better exception handling for null Application.
Version 0.40: March, 2000
Enhancement:
1.New installation program, solves installation related problems.
2. Installation deploys AceletSuperApp application.
3. Add deploy/undeploy facilities.
4. Add EJB and application lists.
Change:
1.SimpleMonitorInterface: now more simple.
Version 0.30: January, 2000
Enhancement:
1. Add realm support to J2EE
2. Come with installation program: you just install what you want
the first time you run Super.
Version 0.20: January, 2000
Enhancement:
Add support to J2EE Sun-RI.
Change:
1. Replace logging device "file" with "buffer" to be
compliant to EJB 1.1. Your code do not need to change.
Version 0.10: December, 1999
Enhancement:
1. provide SimpleMonitorInterface, so GUI experience is
not necessary for developing most monitoring applications.
2. Sortable table for table based windows by mouse
click (left or right).
Version 0.01 November., 1999:
1. Bug fix: An exception thrown when log file is large.
2. Enhancement: Add tour section in Help information.
Version 0.00: October, 1999
Thanks.

How set authorizations for sales reports and other reports in SAPB1

Hi, I'm currently working in SAP Business One Version 8.82
The issue I'm facing is that I want to set it up so that certain users cannot see other users' sales information. I know that I can turn on or off the Sales Analysis Report for various users for instance, but what I really want specifically is this. Suppose we have 3 different teams: Team A consists of (Angie, Angela, and Anita the manager), Team B consists of (Bob, Barbara, and Ben the manager), Team C consists of (Cat, Charlie, and Courtney the manager). I would like to make it so that everyone can view the individual sales order documents of everyone else (in case a customer calls and needs information, but the salesperson who created that document isn't there); however, Angie should only see her own orders when she does a Sales Analysis while Anita, the manager of Team A, should see the the orders of Angie, Angela, and herself of course.
To summarize, I'd like to see the following
1. Each salesperson can lookup and view any sales order.
2. Each salesperson can run an sales report to view all his/her own open sales orders.
3. Each manager can run a sales report on his/her subordinates, but not on the other managers or their subordinates.
4. The boss or other people working in corporate are able to run a report on all open sales orders.
What's the best way to approach this? Is it best if I create my own report? I haven't created any reports from scratch yet, so I'm not sure exactly how that works. I'd like to be able to group the salespeople up by location if possible. The sales analysis report doesn't really do that, but it is useful. I just don't want everyone to be able to see the numbers on their peers.
Thank you I appreciate any help or advice.

Hi,
1. Each salesperson can lookup and view any sales order.
Answer:
Create own report by using query and save under query manager and the assign for all group. So that all sales person can run this query and can get sales order detail.
2. Each salesperson can run an sales report to view all his/her own open sales orders.
Answer:
Create individual query ( add condition in where clause slpname = 'XXX') for each sales person and save it under query manager and assign to particular user group
3. Each manager can run a sales report on his/her subordinates, but not on the other managers or their subordinates.
Answer:
Create query for only particular team ( condition is slpname = XXX OR YYY OR ZZZ) and save under query manager. Make schedule report on this and send it to only particular manger
Same way create for another manager and schedule report.
4. The boss or other people working in corporate are able to run a report on all open sales orders
Answer.
Create query for all sales person and schedule report to big boss.
Hope you can get an idea.
Let me know if you need sales report ( advice required field)
Thanks & Regards,
Nagarajan

HDD for Time Machine and other stuff

Just a very short question.. Can I use my external harddrive for Time Machine and for example putting files on it to take it to my friend, or the otherway around, put files on it and take it back home?
The reason I ask this is that I hooked up a USB HDD and it said I needed to clear all the data on the disk first before using Time Machine.

As you probably already figured out.. I don't know anything about External HDDs. That's why I want you to ask which of those LaCies you would suggest for TM with 40GB of used data and it needs to be fast:
1: http://www.lacie.com/products/product.htm?pid=11022 (320GB)
2: http://www.lacie.com/products/product.htm?pid=11013 (320GB)
3: http://www.lacie.com/products/product.htm?pid=10695
4: http://www.lacie.com/nl/products/product.htm?pid=10811 (only a Dutch link, I'm sorry)
Hope you're able to help because your help is fabulous so far!
Message was edited by: FiveMenM

Import data in to tables for MySQL, DB2 and others

The documentation says that you can right click and select import data and import from a file. But apparently this doesn't work for MySQL, DB2 or other databases? Is that correct? There is no way to do mass data entry or editing of data?

Correct. We're trying to help you move data from MySQL, DB2, or other (non-Oracle) databases TO Oracle.

Solman table names for BP creation and others

Dear All
I am the new one to Solman.here i want some relevant information
i want the Table names for the follwing areas.
if you have all the table names can u tell me the table names and descriptions
1. Business partner creation.
2.Supports message and its entry flows updated in which table.
3.Change request and its entry flows saved in which table.
Regards
Anand

Hi,
For lead, activity and opportunity table name is:
1. CRMD_ORDERADM_H - Business Transaction
2. CRMD_ORDERADM_I - Business Transaction Item
Reward points if helpful.
Shridhar
Edited by: Shridhar Deshpande on Jan 30, 2008 7:52 AM

Zoneinfo bug for Asia/Yekaterinburg and others

Similar Messages

Maybe you are looking for