Zones + Directory installation + cacaoadm
Hello,
I am installing directory server using DSEE.6.3.Solaris10-X86_AMD64-full.tar on solaris 10 zone, x86 machine.
however directory server installation goes into wait mode when it comes to "starting cacaoadm" and never come out.
while debugging found that cacaoadm service is not getting started.
I run the command using sh -x and found it wait at below point
+ /usr/bin/svcs -H -o STA svc:/application/management/common-agent-container-2:default
state=DIS
+ [ 0 -ne 0 ]
+ [ DIS = MNT ]
+ return 0
+ [ 0 -ne 0 ]
cacao_starting_instance=default
+ /usr/sbin/svcadm enable -st svc:/application/management/common-agent-container-2:default
bash-3.00# cacaoadm status
default instance is DISABLED at system startup.
default instance is not running.
bash-3.00# cacaoadm enable
bash-3.00# cacaoadm status
default instance is ENABLED at system startup.
default instance is not running.zone info as below
bash-3.00# zonecfg -z msgbe1
zonecfg:msgbe1> info
zonename: msgbe1
zonepath: /zone/msgbe1
brand: native
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: shared
fs:
dir: /data
special: /data
raw not specified
type: lofs
options: [rw,nodevices]
net:
address: 10.77.33.222
physical: iprb0
defrouter not specified-thanks
sumant
please could we move this to the directory server forum?
Similar Messages
-
Application directory Partition, Reverse lookup Zone , after Installation of Tree Domain
I have multiple domains (Windows Server 2008 Enterprize, and funtional level 2008) in an exisiting forest
after installation of new Tree domain i am facing the problem in creating reverse zone in DNS
Error message
"the partition to replicate zone data top all dns server that domain controllers on the active directory ws not created. The application directory partition operation failed. the domain controller holding the domain naming master role is down or unable
to service the request or is not running windows 2003"
plz reply soon i am facing a trouble .
WajahatThe error message states that your domain naming master role holder is down or not responding.
First, you need to identify which one of your DCs is the holder of this FSMO role: You can use
netdom query fsmo command for that. If there is no DC that is currently holding this FSMO role then you need to size to one of them: https://support.microsoft.com/KB/255504?wa=wsignin1.0
If one of your DCs is holding the role then you need to check why it is not responding or unreachable. This could be checked by running
dcdiag on this DC to do a health check.
I would also recommend that you refer to recommendations I shared here: http://www.ahmedmalek.com/web/fr/articles.asp?artid=23
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Internet Directory installation errors
Hi,
I have RH5
$ORACLE_HOME=/oracle_home/home/dba/oracle/product/oid
-------Trying to install Oracle Internet Directory.
After installing the database, creating repository, installing the ultra search - I'm in a process of installation of AS - Internet Directory components.
I'm hitting consistent errors related to Dependencies:
I have a system wide tnsnames.ora in /var/opt/oracle
1. If TNS_ADMIN is set to /var/opt/oracle ->>> the error is:
the system-wide tnsnames.ora file has to be renamed and the file created during the installation in
/oracle_home/home/dba/oracle/product/oid/network/admin
has to be merged with the system-wide file.
2. If TNS_ADMIN is set to:
/oracle_home/home/dba/oracle/product/oid/network/admin
"Dependencies :the environment variable, TNS_ADMIN has been set to a non existent directory, an invalid directory outside of the selected Oracle Home or a directory that doesnot contain a valid tnsnames.ora file.Remove this environment variable and restart the install "
It looks to me I exhausted all the combinations of TNS_ADMIN locations and renaming-replacing my current tnsnames.ora.
I'd appreciate any suggestions!.
Thx,Handle: 809617
Status Level: Newbie
Registered: Nov 10, 2010
Total Posts: 18
Total Questions: 7 (7 unresolved)
http://forums.oracle.com/forums/ann.jspa?annID=718 -
Ovi Suite custom directory installation - is it po...
Is it possible to install Ovi Suite to custom directory? I have few partitions, and i want to install Ovi to other partition than C:\.
I found one topic about same problem, but found not valuable solution (running ovi installer form cmd with target directory didn't helped one of nokia help board users, so i decided not to try).
Using Windows 7 Ultimate.
ThanksIt may be worth trying another clean install including removing all Nokia/Ovi software from the computer, including any drivers thet maention Nokia or Ovi, then run Nokia PC Cleaner.
Then try the latest version of Ovi suite from Beta Labs
http://betalabs.nokia.com/apps/nokia-ovi-suite-beta
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
HELP - Sparse Zone Directory Access
Hello. I want to install a zone that will serve as a webserver for a dynamic site, using PHP and MySQL. I installed a sparse zone yesterday. When I tried to configure MySQL today, I found I was unable to because files/directories that need to be changed/removed by ./mysql-test-run are mounted as read only. I thought to myself, "Okay, We'll install a whole zone," but there is insufficient disk space. I am leaving this job tomorrow or the next day and I do not have time to do the research I would normally do to solve this problem (and no one else--I work in a biology lab--will be around to work on it after I leave). Therefore, I am asking a favor: can someone tell me exactly what I need to do in order to install MySQL on the sparse zone? I am very sorry about this; I cannot justify asking it. I'm begging. And I'm desperate. Time is an issue here, so please respond as quickly as you can. Thank you very much. Very much. Please.
JJThis is what we do, based on something I saw on Big Admin back in the day...very useful for Apache, MySQL, etc.
Assuming your zone is named 'mustard' and is in /zones:
mkdir /zones/mustard/local
zonecfg -z mustard
add fs
set dir=/usr/local
set special=/zones/mustard/local
set type=lofs
add options [rw,nodevices]
end
verify
commit
exit
zoneadm -z mustard reboot
After your zone reboots you will have /usr/local as its own file system within the zone. -
Web-Calendar component in Wiki get lost after Open Directory installation
if I change my Lion Server to use opendirectory and not work in standalone mode, I lose the ability of the server for web-calendar for example at the wiki-webpage.
servername/webcal
The error-message tells me, the service calendar is deaktivated and I should activate it at Server App.
But at Server App:
a) iCal Service IS ACTIVE
b) I find NO OPTION for activating the Web-Calender function under iCal like at the Mail-Service (one above) -> activate Webmail
So, HOW I can BRING the web calendar component BACK TO MY WIKI?
I wanted to use it in company, but now I not touch this "open directory activation" anymore, because I will lose. Without opendirectory the webcalendar working!
I tried to find that function with Server - Admin, but this programm is much limited to what it was at the Snow Leopard Server and there I cannot select the iCal Service anymore. It's same with the new Airport Utility 6.0. Terrible reduced and I just installed back 5.6 and this is good working for my needs.I found the solution: Like with the PPTP-VPN problem it depends on the certificate. If you BUY an official public certificate (yes spend money for your Server more than the server price!), at once the Webcalender and the PPTP-VPN working!
If in other way you fight through your selfsigned certificate problems and rebuild it, at once you will get all your problems again. So, not wonder why Apple at once mention in the help-line, that you need to buy a certificate. This, they mean true! You should support the certificate system of the new IPv6 and vanishing IPv4 world (I mean the IBM VeriSystem) for the new TRANSACTION orientated usage-fee-world. And not forget in this new Internet 2 world: E-Mail will become a service that get paid per transaction and 19% VAT tax (Germany) on top of it and 1 Cent communication tax (like the energy cent we pay today for each unit of energy source) for the EU. This, they realy plan to realize next years. So, why we wonder about this strange certificate issue it such transactions need be identified unique? In April in greater region Hannover-Braunschweig they will change the bankingcards for the new cashfree-system (GiroGo). And who wonders: cash-transfers will get transaction fees. They tell: Only 1 Cent / 5 Euro, only 2 Cent for 10 Euro, only 15 cent for 15 Euro. So, you understand what this new transaction and veriSigned world in real means? It is a change from a pocessing-free-world into a usage-fee-world. And you realy think that 2013 we still will speak from a banking crisis under such new conditions? They will get billions each day cash-transaction-fees. With NFC-iPhone 5 no problem (NCF -> look at Near field communications). The people will say: Oh, it's only 1, 2, 3 Cent but so practical not change money coins anymore. You will see how good this transaction usage-fee money-machine will work. And the EU will get billions transaction-communication-tax each day from the emails, there will be no discussion about Greek, Irland, Portugal, Spain (PIGS) ... economic-crisis anymore. You will see, such will happen! No banking crisis with Internet 2, no economic crisis with Internet 2. All will be solved by us, the people. Oh, our Merkel, when she come back from a G20 meeting already said: "We decided that each economic member and part need be 100% in focus in future and not uncontrolled anymore."
If somebody more interested at this plan, you can watch this docu movie "one mainframe to rule the world" that describes deeper the issue of certification, identification, verification of people or things. The near world we drive directly into. And this certification system is ruled by whom?
http://www.youtube.com/watch?v=uXTwS_T-CvM
When I at least go to the Apple-Center I found the teacher with a Microsoft-T-Shirt of certification and wonderd very much. Than he told me, that the only groupware that is true for a good usage together with Apple is Exchange Server. And the more he told the more I wonder because he is Apple-Highgraded. But I not so much wonder anymore. Understand the game this companies play with us. It's a licence crisis and it can be described as: Microsoft is a the one end of the coordination system with x = price and y = pieces sold. Apple is exaclty at the opposite. Look what MS does, look what Apple does and at the end it's not difficult to see, that they moving to eachother to meet. And the missing 3d coordinate z in this new room is IBM with it's VeriSystem.
So, a perfect xyz-combination for all giants.
How Google, Linux ... matches inside this "new computer world order"?
I will mention that much IT-professionals at the moment going to such new curses and explain that 2013 they will change all hardware to "certified hardware" that NEED BE used in businesses and for example Linux will not be part of this new "certified world". -
Access manager installation on solaris zone
Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapdThanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid -
How-To Sun JES 5 on Solaris 10 -Zones
Hi Experts,
I am in a process of installing JES 5 on Soalris 10 ( T2000 server with Global and non-global Zones).I ahve installed the below components in various zones :
Shared components -- Gloabl zone
Directory Server --Zone 1
Access Manager over web server-- Zone 2
Now, where should i install portal server provided that i want a Applicaiton server also.
Please put some light on this .
thanks
LokeshHi ,
Many thanks for the reply.
Basically I want to go with the choice of having PS over Application Sever in a New Zone.
I tried Installing Application server and Portal server in a new Zone,while installing I provided the values for the already Installed Directory Server and Access Manager (which are on diff zones).
The Installation of Portal server was successfull but config failed.I looked into the /var/opt/SUNWportal/logs/config/portal.fabric.0.0.log and found the below error
[#|2007-10-31T14:17:49.638+0000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.ValidatePortalInputData; MethodName=validateAMSDK; |PSFB_CSPFC0056:Error while validating the SSO Token.
com.iplanet.sso.SSOException: Error occurred while creating SSOToken.
at com.sun.portal.util.SSOUtil.createSSOToken(Unknown Source)
at com.sun.portal.fabric.config.ValidatePortalInputData.validateAMSDK(Unknown Source)
at com.sun.portal.fabric.config.ValidatePortalInputData.<init>(Unknown Source)
at com.sun.portal.fabric.config.ConfigurePortal.main(Unknown Source)
Since the Access Manager and Portal server are on different web containers ( Webserver and Portal Server respectively) , I suppose the above errors are related to those.
Please let me know -
1) Is the deploymen architecture Correct?
2) What can be done to solve the above problem.
Thanks for your time on this post.
Rgds
Lokesh -
Server 2012 R2 STD RODC Installation Failure
Hello,
I am running into issues installing a Windows Server 2012 R2 RODC, i have pre-created the RODC account, and set the proper delegation permissions. I have DNS configured properly and verified everything in DNS is good,
i also verified the firewall between sites and everything is open for AD traffic, all communication is also good. I'm not sure if this is isolated to 2012 R2 RODC installations, because a couple months back i successfully implemented a 2008 R2 RODC. Anyways,
the error i keep seeing in the wizard, powershell and dcpromo logs are " The wizard cannot access the list of domains in the forest. the error is: the specified network name is no longer available. Below is part of the error, i can get the full
log if needed.
Enter MyDsGetDcName2
dcpromoui 890.CE8 2B04 21:09:11.585 Calling DsGetDcName
dcpromoui 890.CE8 2B05 21:09:11.585 ComputerName : (null)
dcpromoui 890.CE8 2B06 21:09:11.585 DomainName : bcc.pg.com
dcpromoui 890.CE8 2B07 21:09:11.585 DomainGuid : (null)
dcpromoui 890.CE8 2B08 21:09:11.585 SiteName : (null)
dcpromoui 890.CE8 2B09 21:09:11.585 Flags : 0x40000000
dcpromoui 890.CE8 2B0A 21:09:11.586 HRESULT = 0x00000000
dcpromoui 890.CE8 2B0B 21:09:11.586 DomainControllerName : \\DCWHBC02.bcc.pg.com
dcpromoui 890.CE8 2B0C 21:09:11.586 DomainControllerAddress : \\155.118.153.249
dcpromoui 890.CE8 2B0D 21:09:11.586 DomainGuid : {F42A2C4C-5E7B-48A8-BF8B-B5324677A050}
dcpromoui 890.CE8 2B0E 21:09:11.586 DomainName : bcc.pg.com
dcpromoui 890.CE8 2B0F 21:09:11.586 DnsForestName : bcc.pg.com
dcpromoui 890.CE8 2B10 21:09:11.586 Flags : 0xE0007178:
dcpromoui 890.CE8 2B11 21:09:11.586 DcSiteName : WHBC2
dcpromoui 890.CE8 2B12 21:09:11.586 ClientSiteName : Gebze
dcpromoui 890.CE8 2B13 21:09:11.586 using forest name bcc.pg.com
dcpromoui 890.CE8 2B14 21:09:11.586 Enter State::GetOperation REPLICA
dcpromoui 890.CE8 2B15 21:09:11.586 Enter State::SetForestName bcc.pg.com
dcpromoui 890.CE8 2B16 21:09:11.586 Enter State::SetTargetDomainName bcc.pg.com
dcpromoui 890.CE8 2B17 21:09:11.586 Enter MyCredUIParseUserName
dcpromoui 890.CE8 2B18 21:09:11.586 userName: romero.r.18 defaultDomainName: bcc.pg.com
dcpromoui 890.CE8 2B19 21:09:11.586 pszParsedUserName: pszParsedDomainName: dwRc: 1315
dcpromoui 890.CE8 2B1A 21:09:11.586 Now trying to parse newUserName: bcc.pg.com\romero.r.18
dcpromoui 890.CE8 2B1B 21:09:11.586 pszParsedUserName: romero.r.18 pszParsedDomainName: bcc.pg.com dwRc: 0
dcpromoui 890.CE8 2B1C 21:09:11.586 user: romero.r.18 domain: bcc.pg.com fullUserName: bcc.pg.com\romero.r.18 dwRc: 0
dcpromoui 890.CE8 2B1D 21:09:11.586 Enter CheckUserIsLocal
dcpromoui 890.CE8 2B1E 21:09:11.586 Enter State::GetOperation REPLICA
dcpromoui 890.CE8 2B1F 21:09:11.586 Enter State::ReadDomains
dcpromoui 890.CE8 2B20 21:09:11.586 Enter State::GetTargetDomainName
dcpromoui 890.CE8 2B21 21:09:11.586 Enter State::GetOperation REPLICA
dcpromoui 890.CE8 2B22 21:09:11.586 target domain name: bcc.pg.com
dcpromoui 890.CE8 2B23 21:09:11.587 Enter CDomains::ReadDomains
dcpromoui 890.CE8 2B24 21:09:11.587 Enter MyDsEnumerateDomainTrusts
dcpromoui 890.CE8 2B25 21:09:11.587 Enter GetDcName
dcpromoui 890.CE8 2B26 21:09:11.587 Enter GetDcName2
dcpromoui 890.CE8 2B27 21:09:11.587 Enter MyDsGetDcName2
dcpromoui 890.CE8 2B28 21:09:11.587 Calling DsGetDcName
dcpromoui 890.CE8 2B29 21:09:11.587 ComputerName : (null)
dcpromoui 890.CE8 2B2A 21:09:11.587 DomainName : bcc.pg.com
dcpromoui 890.CE8 2B2B 21:09:11.587 DomainGuid : (null)
dcpromoui 890.CE8 2B2C 21:09:11.587 SiteName : (null)
dcpromoui 890.CE8 2B2D 21:09:11.587 Flags : 0x40000011
dcpromoui 890.CE8 2B2E 21:09:12.102 HRESULT = 0x00000000
dcpromoui 890.CE8 2B2F 21:09:12.102 DomainControllerName : \\DCWHBC02.bcc.pg.com
dcpromoui 890.CE8 2B30 21:09:12.102 DomainControllerAddress : \\155.118.153.249
dcpromoui 890.CE8 2B31 21:09:12.102 DomainGuid : {F42A2C4C-5E7B-48A8-BF8B-B5324677A050}
dcpromoui 890.CE8 2B32 21:09:12.102 DomainName : bcc.pg.com
dcpromoui 890.CE8 2B33 21:09:12.102 DnsForestName : bcc.pg.com
dcpromoui 890.CE8 2B34 21:09:12.102 Flags : 0xE0007178:
dcpromoui 890.CE8 2B35 21:09:12.102 DcSiteName : WHBC2
dcpromoui 890.CE8 2B36 21:09:12.102 ClientSiteName : Gebze
dcpromoui 890.CE8 2B37 21:09:12.102 Enter Computer::RemoveLeadingBackslashes \\DCWHBC02.bcc.pg.com
dcpromoui 890.CE8 2B38 21:09:12.102 DCWHBC02.bcc.pg.com
dcpromoui 890.CE8 2B39 21:09:12.102 Enter AutoWNetConnection::Init
dcpromoui 890.CE8 2B3A 21:09:12.102 Enter AutoWNetConnection::CloseExistingConnection
dcpromoui 890.CE8 2B3B 21:09:12.102 pszComputerName : DCWHBC02.bcc.pg.com
dcpromoui 890.CE8 2B3C 21:09:12.102 pszUserName : bcc.pg.com\romero.r.18
dcpromoui 890.CE8 2B3D 21:09:14.648 WNetAddConnection2W returned 64.
dcpromoui 890.CE8 2B3E 21:09:14.648 HRESULT = 0x80070040
dcpromoui 890.CE8 2B3F 21:09:14.648 Enter AutoWNetConnection::CloseExistingConnection
dcpromoui 890.CE8 2B40 21:09:14.648 HRESULT = 0x80070040
dcpromoui 890.CE8 2B41 21:09:14.648 HRESULT = 0x80070040
dcpromoui 890.CE8 2B42 21:09:14.648 HRESULT = 0x80070040
dcpromoui 890.CE8 2B43 21:09:14.648 failed trying to read domains, returned 0x80070040
dcpromoui 890.CE8 2B44 21:09:14.648 Enter GetErrorMessage 80070040
dcpromoui 890.CE8 2B45 21:09:14.648 performed state 7, next state 37
dcpromoui 890.CE8 2B46 21:09:14.648 Error: The wizard cannot access the list of domains in the forest. The error is:
dcpromoui 890.CE8 2B47 21:09:14.648 Error: The specified network name is no longer available.
dcpromoui 890.CE8 2B48 21:09:14.648 Enter State::GetHadNonCriticalFailures
dcpromoui 890.CE8 2B49 21:09:14.648 bHadNonCriticalFailures = false
dcpromoui 890.CE8 2B4A 21:09:14.648 Enter State::UnbindFromReplicationPartnetDC
dcpromoui 890.CE8 2B4B 21:09:14.648 Exit code is 26
Server 2008 MCTS - Applications Infrastructure, Network Infrastructure, Active Directory, Vista.Hi,
As far as I know, this problem can occur if a domain controller in the domain has not registered an "A" record for itself in DNS.
To solve this issue, we can add the A record for the domain controller with the
ipconfig /registerdns command. Flush the DNS cache on the computer running the Active Directory Installation Wizard by using the
ipconfig /flushdns command.
Regarding this error, the following articles can be referred to for more information.
Error message: The wizard cannot gain access to the list of domains in the forest
http://support.microsoft.com/kb/259374
Troubleshooting Active Directory Installation Wizard Problems
http://technet.microsoft.com/en-us/library/bb727058.aspx
Hope it helps.
Best regards,
Frank Shen -
Hi,
Ive read numerous threads about mounting NFS shares to non global zones but have still not been able to successfully resolve my issue.
I have 5 T3-2's which are being used as standalone SAP servers running Solaris 10u9 and numerous sparse non global zones. Basically I have a 1Tb HDS LUN presented to 1 T3-2 and have NFS shared this out as /stage to the remaining 4 global zones which works as expected.
However I am unable to mount the shared NFS filesystem to the non global zones.
When I try to mount the NFS share from the non global zone itself I receive RPC errors, I have also tried configuring the non global zone with the NFS mount (from the global zone) as lofs but the zone wont boot and also manually mounting the NFS mount from the global zone which looks like it works but when I do a df on the non global zone I receive stat erros.
Ive even tried linking the NFS share on the global zone to the non global zone directory but that produces a strange linkage when the zone is booted.
Numerous threads say this is not supported but I cant believe Oracle after ~6/7 years of zones and numerous threads on the subject wouldnt have resolved this issue.
I could easily locally mount the storage locally and lofs it to the non global zone but unfortunately dont have the storage capacity available which is why I thought NFS mounting to the non global zone would work!!
Any suggestions would be gratefully received!
Thanks.If you are trying to mount NFS file system on non-global zone from global zone of the same server, use lofs instead.
You can mount the same file system to all non-global zones using lofs and all non-global zones have read/write access to it.
If it is global zone of some other server then you can use NFS. But before that check the way it is exported on NFS server whether the client from which you are trying to mount it has permissions to do so. -
Can anybody provide me the installation guide for oracle 11g OID on linux 64bit (no SPARC) platform .
I searched in oracle site but could find the relavent one. There are lot of document , got confused.
I just need the installation guide for prerequisites check.Hi user;
If you mention Oracle Internet Directory (OID) please refer below link:
http://wiki.oracle.com/page/Installing+Oracle+Internet+Directory+(OID)+for+Names+Migration
http://download.oracle.com/docs/html/A87557_01/install.htm
step-by-step: how to install OID
step-by-step: how to install OID
Also see:
http://www.google.com.tr/#hl=tr&biw=1209&bih=761&q=Oracle+Internet+Directory+installation+guide&oq=Oracle+Internet+Directory+installation+guide&aq=f&aqi=&aql=&gs_sm=e&gs_upl=18484l25219l1l32l32l4l21l0l0l110l516l6.1&fp=b8cfe4731ae0b8bd
PS: I suggest for your issue close thread here as answered and move it to Forum Home » Identity Management » Identity Management
Regard
Helios -
1. How to identify the patch as a Global patch or local patch?
The SUNW_PKG_ALLZONES flag in the pkginfo is applicable to individual packages inside a patch.
2. Is it sufficient to execute patchadd (without any parameters) on global zone?
Online Doc says the patchadd command on global zone propagates the patch installation on all local zones automatically)
3. Will there be any patches applicable to local zones? If yes do we need to install them individually on localzones?
The online doc says we need not to patch the local zones. That will be taken care by global zone patch installation. How far this is true?
4. There are some global zone patches require reboot, do we need to shutting down all the local zones gracefully before we do reboot container?
The patchadd command takes care of propagating the patch installation to all the local zones, so will reboot command implicitly shutdown machines gracefully?First, these comments apply to native zones on Solaris 10 which is what I think you're asking about based on the nature of your questions. They do not apply to other kinds of zones (such as ipkg zones on Solaris 11 Express). I not sure about your first question so I wont try to answer it.
2. In general, it is sufficient to apply the patches using patchadd in the global zone. The patching process will figure out what needs to be done in the non-global zones and will do it automatically. You can check this using "showrev -p" or "patchadd -p" in the zones to see what patches were applied to the zones and what patches were not.
3. I can't answer give a definitive answer to this question. I can imagine a situation where packages are installed in a non-global zone which do not exist in the global zone. In that case, I don't know whether applying the patch in the global zone would work or not. If patching from the global zones fails in that case, you might have to apply the patch in the non-global zone. However, in general patching in the global zone works fine.
4. The reboot command appears to shut the zones down gracefully but I'm not authoritative with respect to this point. I usually use shutdown to send notices to users in shutting down zones before rebooting the machine but if no notices are required I just reboot the global machine.
Hope this is helpful. -
Copy/cloning ZFS zones between servers
Hello,
We have two identical servers (two blades actually) and I created a zone with ZFS in one that i'd like to clone/copy to the other server.
Is this possible? if so? is there an easy way? I've searched in google and all I could find was copy/clone in the same server, but no info accross servers.
Thanks!I think you will be able to use the ZFS replication features to sync your zone directory and data volumes to a remote host.
[http://blogs.sun.com/constantin/entry/7_easy_tips_for_zfs|http://blogs.sun.com/constantin/entry/7_easy_tips_for_zfs] -
INST-07294 could not retrieve SSO information in OFM11g FRD installation
Hi!
I have an error while trying to install forms,reports 11g:
INST-07294: Could not retrieve SSO information with the given credentials.
Verify the credentials. Make sure that hostname, port and password are correct
ldapbind cn=orcladmin to OID 11g successfull.
SSO rcu executed after ofm rcu.
What I should to check?
ThanksHi, Rodolfo!
Thansk for replay!
"The installer needed for the 10g SSO part is available in the same 11g download page" - I think you are wrong.
On the page that you are mentioned there are only schema creation assistant - SSO Metadata Repository Creation Assistant (10.1.4.3.0)
But here http://download.oracle.com/docs/cd/E12839_01/install.1111/e12003/claqi.htm they say that I need SSO installed:
Install Oracle Single Sign-On 10g (10.1.4.3) on your system in a different Oracle Home location than your Oracle Internet Directory installation.
Why SSO is mandatory and not optional?
So, if I quite right, to get a Portal/Forms/Reports/Discoverer 11g I have to do the following:
1.install db11g
2.install sso mrca
3.run sso mrca with load option
4.run rcu for creating ofm11g schemas
5.install OID11g
6.run sso mrca with register option in OID
7.install Identity Management 10g only with SSO and DAS services from here http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
8.and only then run pfrd installation
Am I right? -
BUG: registered servers missing when password contains non-alphanumeric
I have a fresh installation of DS7 using Sun Java Web Server 7 to host DSCC7. Using DSCC7 web interface I click New Server and the procedure appears to complete successfully (no errors during creation, registration successful). However in the web interface the new server is not listed.
From the command line the new server is listed.
$ /opt/SUNWdsee7/bin/dsccreg list-servers
Hostname Port sPort Type Owner Flags iPath Description
www-c-directory 389 636 DS nobody /var/opt/SUNWdsee7/internal
Cause: the DSCC administrator's password contained non-alphanumeric characters (e.g. a left-angle bracket plus a few other punctuation characters) with about 10 characters in total.
Solution: from the web interface I navigated to Settings, Directory Service Managers, and changed the password for "admin" to a simpler password containing only alphanumeric characters.
Resolution: the registered servers now appear in the DSCC7 web interface as well as the command line. Oddly I can now return the password back to its original value and the servers still appear in the web interface.
Edited by: nhand42 on Jan 10, 2010 4:53 PMEnglish / C 7-bit ASCII.
The software has been installed inside a Whole Container, and the container was manually sysidcfg'd after the zone's installation (before the software installation) using zlogin -C.
Edited by: nhand42 on Jan 11, 2010 2:31 PM
Maybe you are looking for
-
Problem backing up multiple internal hard drives to external
SITUATION: We have 4 internal hard drives dedicated to media + another running the programs. The FCP projects are all saved on one of the media hard drives which also has captured media on it. The other 3 media drives hold the rest of the media for t
-
After I upgraded to Pages 5.2 and Numbers 3.2, my printer won't respond. What to do?
-
Email body [Tags] that work ?
Is there a list of the metadata tags that work in email body text anywhere? Which tags like [Title] etc will parse to the correct metadata when sending mail directly out? Ta J
-
Watch dvd without burn DVD from DVD Studio Pro 4
My client wants to see DVD now and we are 3,000 miles apart. I created DVD project as img file. But it is huge file size to upload. Is there a way to view DVD project through http online?
-
Hello to all of you. For what reasons we should use '%' sign. I have two queries that give me different results SQL> SELECT name1 FROM PERSONS WHERE ((((CONTAINS(PERSONS.NAME1,'%mister%') > 0)))); NAME1 mister_twis_ABC mistertwis SQL> SELECT name1 FR