Zoom 3030 stereo connecting to Audigy 2ZS P

Hi. I want to connect my electric guitar to the computer. My soundcard as I sayed it`s Audigy 2 ZS Platinum (There`s no an abbreviation).
I have an electric guitar wich I connect to a ZOOM 3030 effect processor, but this processor hace two /4 jack OUTPUS wich should both be connected to keep stereo features.
How do I connect them to the Souncard and keep the stereo feature.
Specially using ASIO drivers, which I want to use for recordings in FL Studio.

Nelson,
Hi! Sorry for the delay but the Holiday backed us up a little. As always we can't guarantee a response but this particular question is one that is in an area that I work with a lot (musical recording is a hobby of mine). Anyway as far as your problem goes here is what I do for my keyboard that uses duel mono jacks for stereo output. If you can find a /4'' Stereo to /4'' mono Y splitter then you will be able to connect the two mono outs to the 3030 and the stereo side to the line-in on the Audigy 2 ZS. Most music stores will carry this. If this is not possible here is a way to do it using easily found converters, you will need:
) /8'' to Stereo RCA converter cable (if you can find a /4'' to Stereo RCA this would be better and would eliminate the need for #2)
2) /8'' Female to /4'' Male adaptor
3) 2- RCA to /4'' mono adaptors
Plug #2 into the /8'' side of part # and connect that to the line in on the Audigy 2 ZS. Connect both #3's to the RCA ends of #2 and plug them into the 3030. White is left, Red is right.
Jeremy

Similar Messages

Connecting Soundblaster Audigy 2zs to Home Theater Amplif

Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..

I am in the same situation as you. As the CL told me
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound.

Audigy 2ZS Digital

Just would like a confirmation on this...
If you connect the Audigy 2ZS digital out to a standard stereo reciever (sony) digital coax in it will not damage the reciever?
Sounds silly but I know the digital out is meant for connection to propietary creative lab speakers, and I have read that connecting it to other devices can damage them.
Also I should use a regular small "headphone" jack to connect to the digital out on the audigy 2ZS? This should be a mono cable also?
Please help.. thanks!!!
If you can link to the cable/adaptor I would need that would be great!Message Edited by asharabi98 on 05-29-2006 :23 AM

Any stereo cable with jack on one end and RCA conenctors at the other is fine. It will not damage the receiver. Something like this (use one of the RCA only - I think is the white one for front speakers):
<IMG src="http://us.st.yimg.com/us.st.yimg.com/I/trianglecables-site_900_56428">
Read the FAQ about digital connection and be prepared to have only stereo sound in games because Creative soundcards cannot send surround sound from games over digital connection.
Message Edited by SoNic2367 on <SPAN class=date_text>05-29-2006 <SPAN class=time_text>04:33 PM
Message Edited by SoNic2367 on 05-29-2006 04:34 PM

Digitally Connecting Soundblaster audigy 2 to sonydav s550 home theatre sys

Hi, I have a Soundblaster audigy 2 im not sure which model but it has a pink digital out audio socket on the back of it. My sony system has a digital optical in socket on it. I am having problems connecting them. I brought the following
http://www.maplin.co.uk/Module.aspx?...gital&doy=26m5
as it has a miniplug adaptor which i thought I could use on one end to connect to my soundcard digital output and connect the other end to my home theatre system. Did I get the wrong wire? If so what wire will I need to connect them, will miniplug not fit on the soundblaster digital out, what does? I have messed around with the control panels with no luck. Anyone have any ideas, by the way Im new to this. Thanks in advance

Hello all,
I am having a similar issue. I would like to connect my Audigy 2ZS to a Sony Reciever (STR DE-898) preferably via the digital out. The sound card and reciever are 25 feet apart.
I have read that the digital out on the Audigy 2ZS is specifically for creative lab speakers, and that if you connect it to a normal reciever that it may damage the reciever is this true?
Second, the other option that I have is to buy the 7. adaptor and connect RCA extension cables to the reciever.
The last option is to connect it to the regular headphone jack out, and use an extension cable to connect to the reciever (This is what I am currently using), but the sound quality is terrible.
Please help, I read the recent post on digital out ,which helped some, but still the question remains... if you connect the digital out on the Audigy 2ZS to a Sony receiver will this damage the receiver?Message Edited by asharabi98 on 05-27-2006 0:38 AMMessage Edited by asharabi98 on 05-27-2006 0:39 AM

Connecting Soundblaster Audigy 2 to 2 speaker syste

Hi all,
I am using a Soundblaster Audigy 2 ZS. My PC is connected to a 7. Creative THX system.
That is working pretty fine.
I also have my LCD TV connected to my PC as secondary display and I've got a Teufel 5. system which I want to connect to the audigy.
Reason: I want to watch movies played on my PC on my normal television. I could of course connect the audigy to the Teufel system, BUT this would mean switching cables all the time (from PC 7. to TV 5.).
Is there some kind of high quality switch with which I could save this reconnecting of cables all the time?
Thanks a lot in advance.
and kind regards
Sven

Hello all,
I am having a similar issue. I would like to connect my Audigy 2ZS to a Sony Reciever (STR DE-898) preferably via the digital out. The sound card and reciever are 25 feet apart.
I have read that the digital out on the Audigy 2ZS is specifically for creative lab speakers, and that if you connect it to a normal reciever that it may damage the reciever is this true?
Second, the other option that I have is to buy the 7. adaptor and connect RCA extension cables to the reciever.
The last option is to connect it to the regular headphone jack out, and use an extension cable to connect to the reciever (This is what I am currently using), but the sound quality is terrible.
Please help, I read the recent post on digital out ,which helped some, but still the question remains... if you connect the digital out on the Audigy 2ZS to a Sony receiver will this damage the receiver?Message Edited by asharabi98 on 05-27-2006 0:38 AMMessage Edited by asharabi98 on 05-27-2006 0:39 AM

Connecting vcr to external SB Audigy 2zs Platinum Pro

I've just joined, so apologies if I "mess up". I have some precious things on vhs tape, and want to transfer them to cd/dvd. I run Windows XP. I have to use rca connections, don't think there's another option on the vcr. I see the red and white rca connections on the back of the external 2zs, but where does the yellow (video) connection go? Would be very grateful for help. TIA.
Sybil
Message Edited by Drummond on 04--2009 05:32 [email protected]

Re: connecting vcr to external SB Audigy 2zs Platinum Pro~ Hi Katman - many thanks for the reply. There is no video connection on the SBA2zs that I can find either. I did send mail to Creative, but they haven't had the courtesy to respond. If I use the 2zs for the audio connection, can I then attach the video connection from the vcr to a separate video capture card? Will this bring everything together and in synch? Sorry, I'm still very much on L plates with all this. Once I get things on to the computer, I can then edit out what I don't want, and burn the rest to cd/dvd; or that's what I'm hoping!! It's getting the data from the vcr tape that's the stumbling block. I know there are?expensi've machines that you can put the vhs tape in and it will copy direct to dvd, my friend has one, but she doesn't know whether you can pause the recording (disk) and let the tape continue running till she gets to the next bit she wants to copy, then start the disk again. TIA of further help.
Sybil
Message Edited by Drummond on 04-3-2009 04:05 AM

Want to connect Audigy 2zs gamer with digital so

Ok I have the audigy 2zs gamer, and the gigaworks 750 7. surround sound.
I also have hdtv cable box with digital out, and optical digital out.
I have ps3 (obviously with blu-ray) and xbox 360, both of which have a optical digital out.
I want to be able to connect to these, but I guess the only inputs ( on pod, and on card) are analog only.
My question is. Is there any way to do this. I see a digital i/o box, but I don't think it's compatible. It says it is with the value model, but not the regular 2zs gamer one?
So do I have to buy a newer sound card, or can I use this one as is, or with the digital i/o box to make it work.
I don't care about having multiple connections, I can make do with having only connected at a time.
Thank You

I guess what can solve one of the problems is.
If I use a digital out (4 pin minipole connecter) from my cable box to the line in of the 2zs board, will it accept it...or is the line in for the 2zs analog only?

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

Audigy 2ZS is

I use my Audigy 2zs with a Zalman ZMRSA 5. Headphone amplifier and ZM-RS6F 6. Headphones. Up until this morning the setup has worked flawlessly. However, upon powering up my PC I found that I was hearing sound in only one ear..... now either I am going deaf, or more likely there is a problem. Have checked leads, windows settings etc, nothing has changed. At the moment I am trying to eliminate my soundcard from the list of possible faults..... however.....
I currently have my PC Rigged up to my hi-fi (2 speakers)and note that when I connect to line-out, I only get sound from one of my speakers, whereas outs two and three give me stereo output. I have tested all cables and wiring, and have gone as far as to reseat the card in my PC. I dont understanbd why it worked fine last night, but now I lose stereo output from out- (supposedly connecting to front/rear, as per Zalman and/or Creative install instructions for 5. speakers.)
System is Windows XP Service pack 2.
Anybody got any ideas or is my card/the connector on it goosed?
Cheers
Andrew

<IMG src="http://img73.imageshack.us/img73/8080/audioproblem7uo.jpg">Sorry to be such a nag but I want to make 00% sure its not my card thats screwd and just a software/driver problem. This image is what happens after trying to install this driver either from cd or from the latest drivers. It just wont copy one file into the system32 folder.

Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Audigy 2ZS S/PDIF pinou

I am trying to get information on connecting S/PDIF digital IN's and OUT's to an Audigy 2ZS card.
I have been reading quite a bit about this, but I see either incomplete information or none at all. What I've read has left me quite confused.
For instance, I read something about a 4 pole mini jack, as well as a 5 pole mini jack for the DIGITAL OUT connector. I also read somewhere that certain /8" to RCA "breakout" cables will NOT work for the digital I/O's because the ground(s) are in a different location.
Can someone provide COMPLETE pinout information for the connectors on this board, or, at the very least, ANY/ALL S/PDIF-relatd connectors?
I have made custom cables before, so if I just had the pinout(s), I'm sure I could come up with something.
Thanks.

Gerben wrote:
Thanks for your quick answer. In fact you confirmed my findings so far...
Hence I did find a last straw halm, Why not change all data to AC3 format and allways have 5. digital output? ... I found a AC3 filter programm but not yet the programm to do the translation. Your advice is much appreciated. If it cannot be done please also advice... Thanks very much for your effort.
There are soundcards from other manufaturers that encode the multichannel wave into AC3 form, the feature is called Dolby Digital Li've. There have been many posts complaining about the fact that this feature doesn't appear on the new X-Fi, considering the price and that the feature has appeared on much cheaper hardware. There are several problems with Dolby Digital Li've. First of all, it is not the same as the regular Dolby Digital. DD and DD Li've are lossey compression formats, DD is bad enough, but owing to the fact that DD Li've is a "real time" compression format, the quality is much worse. Another problem is latency. There may be a considerable delay between the action on screen and the sound you hear, a serious problem for games. Creative make a DTS encoder, which is supposed to be considerably better than DD Li've, but I don't think it's available in Europe yet. I don't think you'll find any software encoders.
Is there any reason why you want to use a digital connection?

Sending a DIGITAL -Stereo- Signal from Audigy to HomeCinemaReceiver - Adapter nee

Hello everybody,
I want to connect my Audigy 2 ZS to my HomeCinemaRecei'ver.
Therefor, I wanna use the digital out of the card.
But I don't want any multichannel signal, just oldschool Stereo.
(I already read the FAQs and so on, they just didn't fit my case)
This connection is only meant to be used for music, which has only 2 channels anyway.
So my question now is what of adapter plug I need for this job.
There's already a one "channel" chinch cable that goes from the
receiver to my computer. It has both male endings. (one plug each end)
One end of the adapter plug has to be a female chinch,
but how about the other one? Would a simple small jack plug be sufficiant?`
I really hope you can help me,
for I've searched all the net for weeks now,
without finding any helpful information.
Thanks and Greetings,
Matthias

There're two ways to connect it. One is through the digital output ( which is the same as the front line out on the Audigy and is a different jack on the Audigy 2 series ) or through the front line out.
In either case, you need a stereo mini-plug to phono x 2 connector adapter cable.
In the case of a digital connection, only one of the plugs will carry the signal. For analogue connections, simply plug the two phono outputs into the L/R phono inputs on yer receiver.

Audigy 2ZS 5.1 speaker settings won't h

I've had a problem numerous times. It involves my Audigy 2ZS (Creative) sound card. What happens is that I'll install the most recent software update (driver and Audio Console) for the card and go through the process of making sure the Creative Audio Console recognizes my card as a 5. speaker system (which it is [Creative]). I also make sure that the box is checked to synchronize with the Control Panel in Windows XP. I then make sure Control Panel is set to 5. also. Almost without fail, within a relati'vely short period of time (day/days), the Creative Audio Console has lost the setting and either has Desktop Stereo or nothing as an option that I can chose from as far as a speaker configuration is concerned. I hope that someone of you forum people can lead me in the right direction. Thanks.
Walter
p.s. one other quickie. Should I get 5 speaker separation on all of my audio output or should I only expect it to get it on PC games?

I'm betting it's your antivirus. Many antivirus programs block registry changes, when when you change the speaker settings, it changes them in the registry. You might check into disabling that and see if it makes a difference.
As for when to expect 5. output, generally when you play something that is 5., you'll get 5. output. Most music for instance is stereo (2.0) so that's what you get when you play it. I suggest turning on "CMSS-3d" which will upmix stereo to 5. for you.
Enjoy!
Dale

Audigy 2Zs No System Sound, No Audio Card So

About a month ago I ugraded to the latest drivers for audigy 2ZS and everything ran smoothly until now. I can't understand all of a suden have no sound at all. Checked everything is connected properly. My os is windows vista. Please help. I tried google to find and answer but not luck.

Well to upgrade to beta driver is never a good thing to do . If you have system restore go back in time to before the new drivers were installed . If that does not work uninstall the new drivers and install the old drivers again .Good Luck :smileyvery-happy:

Audigy 2zs notebook - Can hear but NOT record effect of Graphic Equalizer

Dear people,
Audigy 2zs notebook card, using with sonar-le to record (and also with Audacity).
I can record all I play with my soft synths, and mic voice, perfectly. Various tracks simultneously.
Playback is also great.
I use sonar-le in Asio 2-Mode, and MME and all works good.
HOWEVER, I bring up the Creative equalizer, and I enable it, it makes a NOTORIOUS difference.. I can enable it while I am recording, before, or after.
So I record a track as usual, but I enable the equalizer, and I am FINDING-OUT that I can not seem to be able to RECORD the effect of the creative EQUALIZER!
Even though I can hear it in and out, big difference, the track recorded wave continues to record as if it does not see the equalizer at all.
I have tried all available inputs and many many things, but I just can not get the eq. effects to RECORD.
I have two speakers connected to the dongle that attaches to the notebook card... I have also tried using headphones, directly connected to card, and all I can think. I tried also mme mode.
I also tried audacity and same. Can't get the recording to be like what I hear with the headphones.
Why would this be? How can I solve the problem?
Thanks a lot!

neutron wrote:
Whoops!? That sequencer/recording application "Cubasis VST 4" comes packaged with Audigy 2ZS Platinum Pro but not with the Notebook soundcard. A similar product Cubasis LE comes with X-Fi Elite Pro.
I haven't seen any details of the internal layout/architecture of the sound card, but I don't think that would help you in terms of some new configurations for recording.
In terms of recording capability, since there is only one input port with the NOtebook card, you are of course fairly limited in terms of connectivity, unless you have an external mixer (if you are talking about recording two things at the same time).
However, the audio quality of the Notebook card is certainly good enough to record very good quality audio with S/N, THD etc. My opinion is that people spend way too much time fussing about specs, noise etc. where in reality, most external transducers (mics, guitars etc.) always limit the recorded quality (unless you have really good professional recording gear and you have a lot of experience.
I've heard outstanding quality recorded music made on recording gear with much poorer specs than the Notebook card.
Best thing with your Notebook card is do what you've been doing. Use it and experiment and concentrate on the music generation itself.
Thanks for the reply!
I gather that the application may not be downloadable, specially if it is third-party. I do have the Synth effect, though that I can plug into Sonar.. I like the hardware enabled effects, though, specially since my music playing/recording system is a little complex.
Yes, I do have external hardware mixers, and though there is only the mic/line input, that's not too bad since this card has MANY internal inputs and outputs that I DO USE. All? of my instruments and music is now software based..Only the Mic is external. That's why the hardware synth of the 2zs laptop is so attracti've.. It does not bear on cpu or data... That's why I asked about architecture info orient myself.
Also, I may be wrong, but I read that many of the hardware capabilities of the 2zs notebook card are no longer there on the newer cards... That effects and other things are now mostly software based? Is that so?...Can I use two cards on the laptop, the 2 zs and the express slot one simultneously and have more inputs/outputs?
I am still interested in all practical possibilities, and I do like the Creative soundcards.
The great thig is that you told me that the Eq can not be recorded, so that's very important to me.. I can still record it, though out into a second laptop via the headphone jack. But I will try the VST's I have here first and see how they feel and sound.
It really amazes me, though, that I can hear the effect, but there's no way to record it.
Maybe a new driver could do it's
Thanks and best wishes!

Zoom 3030 stereo connecting to Audigy 2ZS P

Similar Messages

Maybe you are looking for