Zoom and fit in all the screen resolution
Dear Friends,
Greetings! when i click on a full screen button, i want to zoom my flash screen for full screen for all the screen resolution. Imagine i loaded my swf in aspx page. in my swf i kept one full screen button, when i click on it it has to zoom my swf full screen, when i click again or press escape button it has to show my old website in the normal state. looking for help in this..
for example, you can refer this site: http://www.templatemonster.com/flash-templates/39229.html
(press fullscreen button and check)
Thanks in advance,
Syed
There is nothing you can do with that unit
Apple should exchange it for an Out of Warranty exchange identical 5S for $269 if you are in the US ,similar pricing elsewhere
Similar Messages
-
After using Image Capture and watching a video, the screen resolution changes
Hello,
Normally the colors of my screen are clear; The top ruler of each window is grey.
But after scanning a color document, the color is pale. As if someone changed the screen resolution.
Is this a common problem?
My former Macbook Pro died because of a problem with the video system, a default acknowledged by Apple that they didnt want to repair under warranty anymore.
Does this ring a bell?
Today, the colors quickly became normal again, but I'd like to make sure it ' s not going to become a serious problem.
Maybe this sounds kind of vague, well if anyone has something constructive to say about this, please do.
thanksdairishcajun
When you decided to not copy the files into the iPhoto Library Folder you took responsibility for File Management. iPhoto does not touch your file structure. Therefore, when you delete a photo from iPhoto you have to delete it from your file structure by hand.
This is not the case if you let iPhoto do the File Management.
There is no way to get iPhoto to find the pics you have deleted from it but which remain in your file structure. In the future, you could Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. You can then delete it from there, and after delete it from iPhoto.
BTW, many people hold on to their own file structure because they feel that they will be unable to find a pic in the Finder, should they need it for uploading or emailing. There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, this produces a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD -
Where can I set the screen resolution
I am trying to use do a course online and they said that the screen resolution needs to be set at 1024 x 768. Where do I do this?
You can paste this in the Code field in the Firefox > Web Development (or Tools) > Error Console and click the Evaluate button and enter 1024x768 on the prompt.
<pre><nowiki>
var Cc=Components.classes, Ci=Components.interfaces;
var ps = Cc["@mozilla.org/embedcomp/prompt-service;1"].getService(Ci.nsIPromptService);
var wm = Cc["@mozilla.org/appshell/window-mediator;1"].getService(Ci.nsIWindowMediator);
var nb = wm.getMostRecentWindow("navigator:browser");
var txt = 'width x height';
var obj = new Object; obj.value = nb.window.outerWidth + 'x' + nb.window.outerHeight;
if(ps.prompt(null, 'Resize', txt, obj, null, {}) && (obj.value != null)){
var vA = obj.value.split("x");
if(vA[0]) nb.window.outerWidth = vA[0];
if(vA[1]) nb.window.outerHeight = vA[1];
</nowiki></pre> -
The screen resolution on my imac changes when I use mirror in system preferences monitor
When I turn on my projector before lion it would just project everything from my screen at it's resolution without having to make any settings. But now with lion I have purchased a VGA to mini cable to first connect, but when I turn on the projector I see the desktop image only so it is working but nothing el;se shows.To make it work I have to go into system preference folder and into monitor and click on mirror. What happens now is the screen resolution changes both on the imac and transfered through the projector. Going back into systems preference and try to change the screen resolution nothing changes. I have heard that I may have to download firmware for the cable????, or is there a patch for lion?????. Go back to the old imac with snow leapord and it work fine????. Please can somebody help.
ken hewittSame answer as in your other thread. You need to update yosemite to 10.10.1. This was a known issue in 10.10.0.
-
I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this
probably your zoom is on. try double tapping with three fingers on your screen, it should go back to normal and then goto
settings>general>accesibility>zoom and disable it -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?
after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days
-
The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?
Take it to an Apple Store or other service provider for testing.
-
I am using a 3GS iphone. While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change.I am using a 3GS iphone.While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change?
If you are having the same issue on several computers then it is a hardware issue! Not a software issue! Replacement is the only resolution!
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne -
When I open my internet and got to say the Macy's website and try to bring up all pages in the handbags dept, the screen goes black and it returns to the screen that has all my icons on it. Why?
Safari is crashing.
Try a reset:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
Is it a common occurance for an iPad 4th gen to just blank out and stop working? The screen shows nothing at all, no sounds but it registers on my computer when connected.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
I am using firefox 4 and i can see difference in the laptop and the lcd. The site looks fine with firefox 3.6 for both and also for all the browsers. Only for firefox 4, things are getting screwed in laptop, as it looks fine for the LCD.
You can see this link as an example.
http://www.automationanywhere.com/products/automation-software-enterprise.htm.
Even the footer doesnt shows the css in laptop, but the same is fine for LCD.
NOTE: I have tested this on most laptops.Well I see that you and I share the same problem, I posted the same type of question and am anxiosly awaiting replies on this topic, as it is very important
I own a small business, and every hour a customer cannot view my site is a customer lost to incompatibility issues.
I hope someone can help answer these issues.
http://www.siegfriedscall.com -
Upgraded to Windows 10 and now I can't see my two HP w1907 monitors or change the screen resolution
I just upgraded my computer from Windows 7 Professional to Windows 10 Professional. Before the upgrade, I had two monitors. Since the upgrade completed, I no longer have two monitors. I need to figure out how to get two monitors back, as well as how to get the correct drivers for my two HP w1907 monitors installed, so that my system recognizes that I have two monitors. I also need to be able to reset the screen resolution to what I had before (in Windows 7).
I just upgraded my computer from Windows 7 Professional to Windows 10 Professional. Before the upgrade, I had two monitors. Since the upgrade completed, I no longer have two monitors. I need to figure out how to get two monitors back, as well as how to get the correct drivers for my two HP w1907 monitors installed, so that my system recognizes that I have two monitors. I also need to be able to reset the screen resolution to what I had before (in Windows 7).
-
Is there any way to change the screen resolution in Front Row?
Hi all,
I've got a Mac Mini plugged in to my TV, and I want to be able to change the screen resolution depending on the content I'm watching (as some content is in 4:3 aspect ratio, some is in 16:9, and I'd prefer to have the picture filling the screen completely). Unfortunately, the TV doesn't have a "stretch" mode for making an 4:3 picture fit a 16:9 aspect ratio. If I know what I want to watch in advance, I can set the resolution accordingly using system prefs on the mac, but if I'm just sitting back choosing what to watch with the Apple Remote, it's annoying to have to leave front row, walk over to the computer and change resolution once I've decided what to watch, open system prefs, change resolution, re-launch Front Row and find what I wanted to watch again.
So I was wondering if anyone had figured a way to allow the screen resolution to be switched from within the FrontRow UI. I've seen that people have written python based plug-ins such as PyeTV and Understudy that allow different types of content to be added to FrontRow, but I've not found any utility plug-ins such as what I'm looking for on the net (nor could I find SDK documentation on this API in the stuff that comes with XCode).
I guess the other approach might be quick keys: has anyone had any success hooking up quick keys macros alongside front row in response to apple remote events? (seems too few events to be able to choose from, but I've never tried it, so I won't assume!) Or how about is there a way to trigger an AppleScript from within Front Row? And, of course, I'm very open to any other ideas you might have!
Thanks very much in advance for any ideas on this.
Andy
Message was edited by: Andy__DSafe Boot from the HD, (holding Shift key down at bootup), set a good rez there.
-
Why does my maximised app window appear a different size to the screen resolution?
First: I'm a beginner with windows programming, fumbling my way through visual studio and C# (my background is C with console applications)... sorry if this is a naive question!
Short story: When I create a window of the same size as the screen resolution. My app window is ~20% larger than my device's screen. Why is this happening?
Long story: I'm attempting to develop an application with a fixed size window and absolute positioning of UI elements. The application will only ever run at a fixed resolution, on a single device, borderless/non-resizeable and full-screen. The resolution
of the display on which it will run is 1280x800 (according to the device specs and resolution reported by the windows control panel) . However, when I create a window of this size, it is too large to fit onscreen. In fact, I have to create a window 1024x640
(0.8x screen resolution) for it to perfectly fit the screen. Anyone know why this is happening?
Thanks!It sounds like you are running in a high-DPI mode but your app is not DPI aware and is getting virtualized. Windows will tell the app it's running at 96 DPI and then embiggen the rendered window so it ends up at the user's requested zoom level.
See
Writing DPI-Aware Desktop and Win32 Applications
Maybe you are looking for
-
How do i connect a led cinema display 27" to notebook with hdmi port
how do i connect a led cinema display 27" to notebook with hdmi port
-
Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our app
-
How do I restore an iOS 7 backup to my iPad?
I installed iOS 8 on my iPad 3 the day after it was released. After using it for a couple of weeks, I'm unhappy with it to the point of wanting to switch back to iOS 7. The manual restore option only seems to allow me to restore from the most recen
-
I have purchased recent songs on iTunes within the last week and now my iPod is not synching with recently purchased songs. I have all the current updates. Help!
-
Hi , My Scenario is File to FIle having Sender .CVS using File Content Conversion The sender file is coming below as an example, a,b,"c,d,e",f Here I need to consider Double code value "c,d,e" as a single field value using File separator as COMMA(,