Zoom Area Doesnt Work with Highlight Boxes, Etc...

Hi,
I recently upgraded to Captivate 6 from version 5. I've noticed the the Zoom Area does not work in the Preview Mode with video recordings or with Highlight Boxes. The area will zoom, but any actions that are happening behind the Zoom Area box will not show. The Hihglight Boxes will appear but will not exit. Is this a known bug? It makes the Zoom Area worthless.
Any assistance is appreciated.
PC Specs:
Windows 7 (32 bit) - SP1
Dell Optiplex 780
Processor- Intel Duo E7500 @ 2.93 GHz/ 2.93Ghz
4 GB RAM
Thanks

Are you looking for Zoom Area to display the action you showcased while recording?
I thing it would zoom the static content from the stage that you plan to zoom.
Can you check the Highlight box properties and their palcement, do they not work standalone or in co-ordination with Zoom?

Similar Messages

Why is the fb video call doesnt work with macbook?

why is the fb video call doesnt work with macbook?

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

Seagate 1.5TB doesnt work with mac

hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
Select Drive (top name) then click on Erase tab.
Under Format select Mac OS Extended (Journaled)
This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

Hi helpers I have very old MacBook 10.5.8 please could you tell me what operating system I should get to be able fully use my laptop as i cant use it properly anymore and doesnt connect with my Iphones etc thanks

Hi helpers I have very old MacBook Mac OS X 10.5.8 please could you tell me what operating system I should get to be able fully use my laptop as i cant use it properly anymore and doesnt connect with my Iphones etc thanks

Josejanko,
You don't supply much info other than your machine is old, so here is some info for you to check thru.
Before doing anything you should have a back up, preferably 2, in the event something goes wrong.
You would have to start by upgrading to Snow Leopard, you would need to buy the disk for about $20 here http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Check the the requirements to see if your machine meets them.
You would then need to run the 10.6.8 v1.1 combo update to get it to 10.6.8 Mac OS X 10.6.8 Update Combo v1.1
You can then access the APP STORE and possibly upgrade to to further OSX.
You may have applications that will not be compatible with any thing past Snow Leopard, you can check those here Upgrading to 10.7 and above, don't forget Rosetta!
http://roaringapps.com/apps
Office 2008 will not work with anything newer than Snow Leopard for an wxample
You may be able to upgrade to Lion or MT Lion or Yosemite, depending on your machine, from the APP STORE.
OS X Lion - Technical Specifications Lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion Mountain Lion
http://www.apple.com/osx/how-to-upgrade/ Yosemite
Hope this helps you

Time capsule doesnt work with telia bredband no wifi

Time capsule doesnt work with telia bredband no wifi. Time capsule and its wifi worked in the beginning, but now it doesnt. I have tried everything without success.

There is no question.. so if it is a statement of resignation.. then if under warranty and faulty Apple will fix it/replace it.. if not dead you will be given it back.
Are you using Lion? If so did you download 5.6 airport utility?
Plug the TC into a computer by ethernet.. hold in reset for 10sec.. and then redo the setup.
Give TC and wireless short names and no spaces and no special characters.. lock the wireless to manual a/n-b/g and fix the channels.
Then if it doesn't work most likely faulty. Otherwise it is just setup is wrong.

ADF bindings are not working with inheritance heirarchy.

ADF bindings are not working with inheritance heirarchy. I am using embedded OC4J in JDeveloper 10.1.3.2.
For the data model I have the following objects\attributes.
1) User (abstract EJB 3.0 POJO)
- Id
- userId
- userName
2) Employee -> extends User (EJB 3.0 POJO)
- enabled
- password
3) Manager -> extends Employee (EJB 3.0 POJO)
- numOfEmployees
4) UserSessionBean (Stateless Session Bean)
- public User findUserByUserId(String userId)
- public List<User> queryUserFindAll()
- Object mergeEntity(Object entity)
I created 2 JSF pages using ADF.
1) ListUsers.jspx - Lists all the users of type Employee and Manager in a table. You can select an user and chose to modify the user details using a modify button.
2) ModifyUser.jspx - Modify the selected user and persist the modified user details.
I implemented ListUsers.jspx by dragging and dropping queryUserFindAll() method from the ADF datacontrol on to the JSF page and selected ADF Table format with selection enabled.
Similarly for the ModifyUser.jspx page I dragged and dropped the User object returned by findUserByUserId(String userId) and selected ADF Form format. I selected OutputText field types for userId and userName.
I then created a navigation case from ListUsers.jspx to ModifyUser.jspx and pass the selected user.
Now when I try to run the web application, ListUsers.jspx correctly displays all the users. Then I select a user of type Employee and click on the modify button. This brings up the ModifyUser.jspx page. However, the UserId text field displays the value for "Id" field rather than "userId".
Question that I have is:
- Why is ADF framework not able to retrieve the appropriate user attribute value for a Employee based on the binding information in case of inheritance ?
Thanks,
Piyush

Hi,
tried with JDeveloper 10.1.3.3 and this works for me. Try JDeveloper 10.1.3.3 - if it doesn't work, have a closer look at your sessionFacade
Frank

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Savevid and keepvid are not working with os 10.7.3-Is there a fix?

savevid and keepvid are not working with os 10.7.3-Is there a fix?
Is anyone else having this problem?

A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day! Did exactly as written and bingo, missing tool icons appeared BUT, and there's always a but...
I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
Hardware:
Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
RAM: 6Gb (667MHz DDR2 FB-DIMM)
HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
Software (OS)
OS: Mac OS 10.7.3 (updated to this 06.02.2012)
Problem software: QuarkXPress 8.5
Thanks in advance for any advice / help...
Paul

Will Lightroom and Photoshop CC work with Indesign/Illustrator/etc from older versions of CS installed on my Mac?

if I subscribe to the Photo plan, will Lightroom and Photoshop CC output work with Indesign/Illustrator/etc from older versions of CS installed on my Mac?

I currently have premiere cs4 and cs5 installed and have had no problems. I have noted on the forums here that some people were reporting problems. So the only way to realy know is make the plunge. I'm running win 7 pro.

I book doesnt work with power cord only

Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

Hey Caesar and Welcome to Apple Discussions,
So your header reads:
"i book doesnt work with power cord only "
Is that right? Will it run only on the battery?
If so this is from the manual:
"The computer runs with battery, but not with the power adapter plugged into
wall outlet
1. Try known-good power outlet.
2. Try known-good power adapter and power cord.
Note:
Verify that power adapter connector glows amber or green. If the power
adapter light is green, turn over the computer and press the battery button. The
battery lights should glow green and stay on if the power adapter is operating
correctly.
3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
Warning: Make sure you do not hold down the "fn" key when resetting the
power manager.
Warning: Resetting the power manager means you will also need to reset the
date and time (using the Date & Time control panel).
4. Replace DC board.
5. Replace logic board."
and it would help to know exactly which iBook you have but this is pretty generic.
Richard

Control-Hints are suppose work with UIX/XML, right?

Control-Hints are suppose work with UIX/XML, right?
I've added some control hints and they worked correctly when viewed using UIX/JSP pages. However, none of the Control-Hints appear on UIX/XML pages.
The documentation suggests that this should work. Am I wrong?
Bill G...

There's a bit of confusion here (which is entirely our fault).
UIX JSP is a subset of UIX XML (almost entirely; a few tags in
UIX JSP simply wouldn't make sense in UIX XML, like <uix:buildTree>).
However, BC4J UIX JSP is not a subset of BC4J UIX XML; the two
are essentially entirely different libraries. (Any JSP tag that
starts with <bc4juix:> counts as a "BC4J UIX JSP" tag.) I agree
that this is confusing.
As far as control hints go: BC4J UIX XML does not currently
support control hints. It does offer more than enough flexibility
to tweak all the dials and knobs made available by control hints (and
a lot more).

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Does the content area API work with Release 2?

Does the content area API work with Release 2 yet?

Release 2 page group APIs will be available in early 2003, in the first PDK version following the 9.0.2.6 (upgrade) release. These APIs will be backward compatible with the 3.0.9 content area APIs.

Partial triggers doesnt work with Geo maps

Hi All,
Partial triggers are not working with Geo Maps.In dvt:map, PartialTriggers , when i select a table/command button from edit option,Field shows Red Mark, throws "Reference not found".
What could be the reason ??
Please help
Thanks
Sandeep.G

Hi Priya ,
See selectoneradio
"The rule is that you cannot set at the same level the properties render and partialTriggers."
Remove the partialTrigger from the inputText field, surround it by a component, f.ex. a panelHorizontal where you put the partialTrigger.
It should then work.
Regards,
Didier.

Need help getting Apple Extreme to work with Be box

Anyone able to give an idiots guide to getting Apple Extreme to work with Be Box wireless modem?
Used to have Orange (Wanadoo) broadband with Livebox wireless router, which i had my AE wired up to and it worked fine. Signed up with Be* and managed to get their wireless router working and communicating with my Mac OK. When i hooked up AE the green light came on but i can't manage to get my Mac to find it.
Any help would be very appreciated.
Thanks.

Hello Orang Hutan. Welcome to the Apple Discussions!
What is your connectivity goal for the 802.11n AirPort Extreme Base Station (AEBSn)?
o Connect it directly to the Be Box wireless router via Ethernet, or
o Connect it wirelessly to the Be Box's wireless network?
If it is to go the wireless route, do you want the AEBSn to extend the wireless range of the Be Box?

Zoom Area Doesnt Work with Highlight Boxes, Etc...

Similar Messages

Maybe you are looking for