Zoom bug ?

I am experiencing problem that PE9 looses where the mouse is when I zoom in. It occurs after I have zoomed in and out a few times and the only answer seems to be to shut PE9 and restart which is a real pain. Using clone, brush etc I paint in an image but the brush stroke goes some where else. It is like PE9 looses where the image is when I zoom. Any answers cos this make it almost impossible to work with PE9

closed, it was an key-column issue

Similar Messages

Zoom Bug in FCPX 10.2

Press Z to go into the magnifying glass. Click around to zoom in on the timeline. Now, hold option key down to zoom out. Magnifying glass icon stays as a plus. It doesn't turn into a minus like it used to.
Small bug. Can anyone else reproduce it?

Looks like a - sign to me

AIR+iOS=StageVideo zoom bug

Hi,
Using the StageVideo and Adobe AIR 3.2 SDK for an iOS app brings a strange zoom when the video starts, anyone any ideas of how to solve this problem?, is this a new bug in 3.2 SDK?
Also a few months ago we post an issue concatenating videos using the StageVideo where trying to play videos one after each other shows a flashing (video clears itself making impossible to play them seamlessly):
https://bugbase.adobe.com/index.cfm?event=bug&id=3133620
http://forums.adobe.com/message/4192764#4192764
Anyone is experiencing this 2 issues, any workarounds?
Thanks

Hello again,
Any chance that this bug will be looked at again?
I see someone else inquired about it here: http://forums.adobe.com/message/5319200
I have tried to "make some noise" on the bug ticket, but there doesn't seem to be anyone listening.
For some of us, this is a very signficant problem, as our software requires absolutely precision when a video starts to play, and this bug is effectively breaking that capability.
Our customers continue to complain, and I have worked around it the best I can by hiding the video until the moment it starts playback, but this is inconsistent at best, because it is essentially nondeterministic - I can't know exactly when the "zoom" effect has stopped, so I either see an "bump" at the tail end of the zoom effect if I show the video too soon, or I skip frames if I hide the video for too long.
Should I just assume this bug will never be fixed, and that Adobe has abandoned their interest in StageVideo on the iPad? If that is true, it is criticial for me to know so that I can begin planning on another solution.
Thanks for your help.

Very annoying zoom bug that with resolve with reboot.

All of a sudden after using the iPad keyboard dock, after 30 mins using the iPad without the dock the screen zooms in for no reason, cropping the top, bottom and sides, in portrait as well as landscape, and this issue doesn't resolve with a restart, wish I could post a pic but I can't. This happens system wide, and most times it crops the whole top status bar with time and battery info completely, as if the iPad doesn't know the right zoom to have....phhhhh...

It was a bug to do with the accessibility zoom feature, I tuned it off and everything is fine, that said it's definitely a bug since I wasn't activating the accessibility zoom in any way, it just zoomed wherever the h. It wanted at will....

Finder zooming Bug

So I happen to be working with lots of stock images at the moment, and my trackpad isn't zooming nor out inside Finder! It works fine in Preview and Aperture, but not in Finder. This must a bug because my trackpad settings are fine tuned and Zoom In/Out is of course enabled.

No, the "Preview" in column view does not load 3rd
party plug-ins. The .swf file is trying to be
previewed using the QuickTime.framework.
Right. I don't even have a flash player installed on my system, other than quicktime. Which stalls just like Finder if I use it to open this file.
This may be considered a bug, but who actually works with 0k .swf
files?
Well, probably no one, but the point is this is an easy test case for
any .swf file with content that Quicktime can't handle. And really I'm find it difficult to believe that the Finder is fragile enough to be broken by this kind of thing.
Is there any way to convice the Finder to not try to preview this kind of file, or to use another app?

Return of the StageVideo Zoom Bug in 3.9 on iOS 7

This bug was most recently fixed just over a month ago:
https://bugbase.adobe.com/index.cfm?event=bug&id=3547660
However, the errant behavior is now happening again in iOS 7 whenever scaling is applied to an mp4 played via StageVideo.
I've logged a new ticket here, complete with an app demonstrating the problem:
https://bugbase.adobe.com/index.cfm?event=bug&id=3638394
More information can be found the following discussions:
- http://forums.adobe.com/message/4322913
- http://forums.adobe.com/message/4707408

Ken,
please could you describe your workflow. It might help to find some solution. Also it would be great if you can share a sample of your document. Please email it to [email protected] with the reference to this discussion "PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2"
thank you.

Font zoomer bug..

Hello everybody,
I just downloaded the font zoomer app for my 603 nokia belle fp2. After changing the font and rebooting it.. Everythng worked good except for whatsapp. The emotions are appeared to be half. Awaiting a solution.
Solved!
Go to Solution.

If Whatsapp essential then un-install Font Zoomer application as you can't always expect third party applications to be compatible with each other.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Layer Style Keyboard zoom bug

When using CS5 and I have the Layer Style dialog box open, using keyboard zoom (command -/+), zooming in triggers 3 zooms instead of one, and zooming out triggers 2 zooms. If I leave the dialog open and switch to another program and back it behaves normally with a single zoom. Also if I then click any of the option buttons (like Direction: Up or Down) or pick something from a drop-down list it is ok but if I click on any slider or click on any other function the multiple zoom returns.
On a unrelated note I really wish the layer styles would display properly at all zoom levels, anything 50% and out makes any bevel type effects display twice as large.
Mac 10.6.8, Photoshop CS5 12.0.4

Yes, I can easily see it with your file. Specifically it happens right between 63% and 64% zoom. We see it again at the boundary between 32 and 31% The jump appears quite obviously if you do an animated OpenGL zoom that crosses that boundary.
This appears to be because of full pixel round-off errors, making the effect suddenly 1 pixel larger as certain zoom levels are crossed. Just as a guess, the effect generating code must be old and integer-based, and so is unnble to deal with fractional pixels when generating the downsized cache level images.
At small effect sizes, such as what's in your image, the error becomes more apparent. I think I've not noticed this much because I tend to do my design work at a fairly large size.
I've seen people (e.g., the Adobe Engineer Chris Cox) tell others to always judge effects at 100% zoom, implying that there's no direct fix for this round-off error. However, I did think of one, though it may cause its own problems (slowness, instability): In the Edit - Preferences - Performance dialog there's a setting for Cache Levels. If my theory about what's going wrong is correct, we should be able to set Cache Levels to 1 and see the problem go away.
Sure enough:
Take note: Based on my own testing with Cache Levels set to 1, you can expect some things to go wrong. Some filters might not display properly, you might get crashes if you try to work with OpenGL enabled, and you will DEFINITELY see a slowdown in a number of different operations.
-Noel

Missing warnings while using softproofing ?

First, congratulations for all the new or enhanced features !
Especially the softproofing function is great : the histogramm is now showing what is happening in the destination color space.
My question is about the warnings on the image while using softproofing : after activating both monitor and destination warnings, and evenif my image is voluntarily completly blown up with highlights, i see very few warnings on the image.
Am i doing something wrong or the warning function is not working well ?
Charles, France

I suspect but could be totally off, that a single color channel will not cause the OOG overlay. You should be able to see this anyway in the normal Histogram (in this case, a blue spike on the end of the Histogram). Again, going out on a limb, I suspect that the profile has to be used to tell LR that all three channels fall outside of gamut, in other words, this isn’t a channel by channel OOG but the entire group. Maybe someone from Adobe can comment.
I can get the OOG warning to show up with only one or two channels saturating. It appears to have been done correctly. See the screenshot below. The channel info shows only red saturating at 255 in the red-masked OOG area
Now I can say that I think there is a zoom bug in terms of the OOG in that I’ve seen some overlay colors appear or disappear based on the zoom ratio. Even saw this in Julieanne’s video demo. So you may want to zoom in at 100% (1:1) to get a more accurate OOG preview.
I am not so sure whether that is a bug or simply a cause of how the Develop preview is generated. LR has to render a low resolution preview and inevitably that involves some downscaling and resharpening (LR has been doing some sharpening on the develop preview for a while now). It is possible that if you are on the edge of being out of gamut, the lower resolution preview can get pushed out of gamut by the sharpening and perhaps by noisy data that is not smoothed away by the noise reduction that would happen at 1:1 but doesn't happen the same way zoomed out at fit or fill.
P.S. as we found in the thread linked above there are some minor bugs in the softproof notably with proofing for sRGB. So I wouldn't trust it too much yet and just look at it as a preview of how it might or will be implemented in the release.

How to download AI CS6?

I just got a new Mac and I wondering how to download Illustrator CS6 with my creative cloud membership?
I can't find it anywhere in the app or on the site.
CC is out of the question until the alt+scroll to zoom bug is fixed (probably on the 7th of never)
Thanks!

Hi smb8282,
Mylenium is correct; if you have a subscription, on the Creative Cloud website, you can choose to get Illustrator - CS6 or CC.
However, before you do that, I must recommend CC - because the zoom bug has been fixed.. When you install CC, you will immediately and automatically also get an update (17.0.1 {Win}, or 17.0.2 {Mac}). the update contains the bug fix.
Cheers,
David

Unresolved bug in adobe reader x with non-default windows zoom level

This seems to have already been brought up here about a year ago: http://forums.adobe.com/thread/776060.
I am using Windows 7 Professional 64-bit with Firefox 12.0 and Adobe Reader 10.1.3. Here is a description of the problem:
Whenever I open any PDF file in a browser (firefox or IE) using the adobe reader I am unable to select text, save the file or interact with the content in any meaningful way because the plugin does not recognise my cursor position. If I click on some text in a PDF document, the reader will immediately highlight a region of text between where I clicked and where it thinks I started clicking from (above 20% of the screen above and to the left of where I actually clicked on the page). If I roll my mouse over the region where the dashboard normally appears, the dash does appear as intended and the cursor changes in response to hover over buttons, as if everything were working, but I am unable to click on anything (clicking does nothing). If I click and hold the dashboard when it appears, it immediately jumps to another region of the page, as if it thinks I moved the mouse (20% up and to the left again). I have recently reformatted and am now using a fresh install, and the issue remains. My desktop zoom level in windows is 150%. The problem appears only inside the browser; viewing PDFs directly in Acrobat Reader X works without issue.
I can resolve the problem either of two ways:
a) Reverting back to the default windows zoom level (125%).
b) right-clicking on the Adobe Reader X icon, navigating to the compatibility tab and clicking "Disable Display Scaling on high DPI settings"
The workaround is easy but it's disappointing that adobe hasn't fixed this. Please consider that it would mostly affect individuals who are vision impaired and might not have the know-how to resolve the problem or check for solutions online, let alone post comments such as this. As far as I can tell this problem severely impaires the functionality of adobe in any browser on any non-standard zoom windows installation.

Please be sure to post your issue in the following Feature Request/Bug Report Form.

Bug in PDF pinch and zoom?

Hi, I have a big problem related the PDF pinch and zoom.
When I try to make an article with 2 vertical pages each containing one imported PDF and 1 horizontal page contain two imported PDF, the result is a simple jpeg page with no pinch and zoom.
The strange thing is that if in the same article I add more vertical and horizontal pages, the pinch and zoom works!
I use the latest version of Folio builder and Folio Producer and, off course, I follow the normal steps: I choose PDF when I create an article, I use iPad and not Android and the PDF zooming is enabled in Viewer Builder.
I need to have 2 vertical pages and 1 horizontal to adapt an a paper magazine (I know the DPS has not been made for this but my publisher want to publish all our magazine with this platform, we also have a magazine specifically designed for the DPS ). My "idea" is create a stack every two pages to allow rotation between pages remaining on the same pages and enable the horizontaly flow between "articles" but if the pdf are transformed in jpeg I can't proceed...
It's a bug or I missed some step?
Thanks in advance for your answers
Claudio (from Italy, sorry for my english!)

I think there might be a bug here.
I've successfully created a pinch zoom folio using the sidecar.zip files posted by Klaasjan.
However if I import my own article (_h and _v both set to iPad dimensions and containing a simple text field of text).
If the article format is set to PDF, once created and I view the Properties panel, the Smooth Scrolling option is set to Horizintal only and greyed out so it cannot be changed. So no pinch/zoom is available.
If the article format is set to Automatic, once created and I view the Properties panel, I can set the Smooth Scrolling property to Off (Snap to page) and tick the Horizintal Swipe Only checkbox (so I'm matching the setting of the sidecar examples).
However, when I the Update the article to the Folio Producer and then check the article Properties again, the Smooth Scrolling has reverted to Horizontal Only. So again, no pinch zoom.

IOS 5 bug: Cannot zoom some web pages

After the upgrade to iOS5, I cannot pinch zoom web pages designed for mobile devices any more. Normal HTML pages still work.
This bug was present in iOS 3.1.2, but was gone by iOS 4. Now it is back.
Please fix this, as it is an accessibility issue.

As a workaround, does the attachment from this thread help?
It starts the native platform-browser and allows you to go for any URL you like.

Two major bugs in Lion - Zoom and Safari auto fill search bar

hey there
every since I updated to Lion I've been experiencing two major bugs... zoom randomly stops working (the one where you press control and zoom in and out) even though it's set to work on the settings. Safari is also experincing a problem concerning the search bar. mine is set to google and whilst on full screen mode, it randomly stops auto filling as opposed to what happens in non full screen mode. I actually need to get off full scren mode and go back to it to make it work again. as to the zoom thing, I need to restart my computer everytime is stops working. any ideas ? thanx !!

You don't need to restart. Quit Safari or logout and back in.

Zoom Level Bug

I filed this through the Feedback page and encourage others to do the same if you see it.
Has anyone had a situation while in Full Screen mode, where switching from viewing a page to a layout master, everything becomes "maximum zoom", filling the page? And that once it goes there, the app will no longer default to "Actual Size" when you open it or switch views? It's seriously annoying and my preference is set to default to 100%. Meantime I've tried trashing prefs and cache files but it didn't help. Any ideas?

Interesting... you should file the bug if you can reproduce it more than once. Hopefully they'll fix it soon. Not uncommong for Apple software to have bugs on only certain machines. Usually related to GPUs and things that all machines don't share in common.

Zoom bug ?

Similar Messages

Maybe you are looking for