Zoom help (should b simple)
im am editing with CS4 and i need help zooming out. i have the camera view effect on the clip so i am zoomed in. i want 2 slowly zoom out and i don't know how 2 do it. basically it would be just like a flash motion tween. can any1 help me?
Don't know if this is the tutorial that Curt linked to, but an early one of his on Basic Keyframing will give you the details. It was done in an earlier version of Pr, but the concepts hold true.
Basically, what you are doing is using Keyframes to control your fixed Effect>Motion>Scale, timed as you wish. You can also do the same for Motion>Position, if you wish to pan/tilt around the image. These can be controlled independently of one another, or you can use the CTI in the Effects Control Panel to locate your various Keyframes in alignment on the mini-Timeline in Effects Control Panel. Note: you will want to also explore Ease-Out/Ease-In and Bezier adjustments to "smooth" out the velocity of these Keyframes. Ease-Out and Ease-In are good starting points.
You might want to use the WAB (Work Area Bar) to Render that section, to check how smoothly the Keyframing works, as without Rendering, it might be a bit choppy in playback.
Hope that this helps,
Hunt
Similar Messages
-
I have no photo edit in iPhoto it should be simple but its just not there can you help
Hi
i have no photo edit in iPhoto it should be simple as click and it comes up but it is not there
hope someone can help
thanksNope - you actually have to share details as can not see your computer
See hints here - Writing an effective Apple Support Communities question - and - Find answers and ask new questions
LN -
How to alphabetize in pages? it should be simple.
How to alphabetize a list in pages? it should be simple, but I can't find it in any menu, in "Help" nor in the Pages user manual.
You may download and install Devon Wordservice, an excellent third party app, to place a Sort commend in the Pages Services menu. There is also a native way to do it.
Wordservice is worth the effort because it gives you more than just sort capability. However, if you want to sort your list without the download, do the following:
Select the lines in your list.
Format > Table > Convert Text to Table.
Select one of the cells in the resulting table.
In the Table Inspector, Table tab, Edit Rows and Columns section, Choose Sort Ascending.
Format Table > Convert Table to Text.
Jerry -
Help with a simple 1811 configuration
I have a very basic level of understanding with Cisco products and I need help with what should be simple and even doable by me.
I have a Cisco 1811 integrated router and am simply trying to use it on my home network. I can configure the router with an enable secret password, password encryption, VTY, aux, and cons logins with no issues. The router has 2 Ethernet interfaces, 0 and 1 and 8 switch ports.
The idea is to bring Comcast ISP service into one of the Ethernet ports and then have three machines on the switch ports able to access the Internet. Also I have an off-the shelf wireless router that I thought I would just plug that into an available switch port and allow a wireless AP as well.
This is so simply, that I can't believe I can't figure it out, but I can't.
I set int F1 to DHCP, performed a 'no shut', and connected the ISP's router and have an up and up indication. I have setup a static network with my three machines on the switch ports and enabled all applicable ports and have up and up indications - however, no traffic flow, even amongst my static Layer 2 switched LAN - not even a 'ping'. By my understanding of Layer 2, this should work right now, whether the ISP service is working or not - WHAT AM I DOING WRONG?
The addressing scheme I have ended up on is 172.16.1.0/28
Obviously without the first hurdle cleared, of why the switched LAN doesn’t work, I haven't got any deeper. Do I need to configure NAT? I don't think I would need to in the scenario right?
All of my experience, and none at the CCNA level, has been with larger Cisco equipment. One thing I noticed on the 1811 was that when trying to create a new VLAN, it appears to work yet does not do anything and the 'sh vlans' output returns nothing, not even the VLAN1 I can see with 'sh ip int brief".
Anyway, if anyone has time to help a newbie out I would appreciate it; I’m lost.
Thanks,
JoshThanks for the help Andrew! You know, I think if this was two separate devices (switch and router) I think I would be up and running, but this integrated stuff is throwing me off, not to mention that the IOS is a much older version (I guess) than what I'm used to.
They were throwing this 1811 in the trash can at work, so I just emptied the trash can. I have no documentation at all but I have since found the 1800 series documentation on Cisco.com and have tried to implement the basic configurations cited; with what seems like success, but still no joy. I did have to recover the password and did so with 0x2142, I bypassed the setup and compared the default configuration with what is listed in the documentation and they DO NOT match; I also tried to go through setup mode with the same indications. Additionally I've also learned that the 1800 series is pre-configured on certain options (DHCP, VLAN), which is new to me - I thought Cisco routers were not configured by default - isn't that kind of the point? (By the way, the below port status may not be correct since I now have all the ports unplugged)
Anyway, here is the 'show run' command, the 'sh ip int brief' command, followed by the 'sh version' command:
Show Run
Casino#sh run
Building configuration...
Current configuration : 2006 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Casino
boot-start-marker
boot-end-marker
enable secret 5 $1$meWw$nsMTp6US7axi/uE0MWULK.
enable password 7 06535E741C1B584C55
no aaa new-model
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 172.16.1.1
ip dhcp pool Casino
import all
network 172.16.1.0 255.255.255.240
default-router 67.165.208.1
dns-server 68.87.89.150
domain-name hsd1.co.comcast.net
no ip domain lookup
ip domain name GinRummy.localhost
ip name-server 68.87.85.102
ip name-server 68.87.69.150
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
multilink bundle-name authenticated
archive
log config
hidekeys
interface Loopback0
ip address 172.16.1.1 255.255.255.240
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet1
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Vlan1
no ip address
ip nat inside
ip virtual-reassembly
interface Dialer0
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer pool 1
ppp authentication chap
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat pool Casino 172.16.1.2 172.16.1.14 netmask 255.255.255.240
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit 172.16.1.0 0.0.0.15
dialer-list 1 protocol ip permit
control-plane
line con 0
password 7 080E5916584B4442435E5C
login
line aux 0
password 7 013C135C0A59475A70191E
login
line vty 0 4
password 7 09635B51485756475A5954
login
end
Show IP Interface Brief
Casino#sh ip int brief
Interface IP-Address OK? Method Status Prl
FastEthernet0 unassigned YES NVRAM administratively down do
FastEthernet1 unassigned YES DHCP up do
BRI0 unassigned YES NVRAM administratively down do
BRI0:1 unassigned YES unset administratively down do
BRI0:2 unassigned YES unset administratively down do
FastEthernet2 unassigned YES unset up do
FastEthernet3 unassigned YES unset up do
FastEthernet4 unassigned YES unset up do
FastEthernet5 unassigned YES unset up do
FastEthernet6 unassigned YES unset up do
FastEthernet7 unassigned YES unset up do
FastEthernet8 unassigned YES unset up do
FastEthernet9 unassigned YES unset up up
Vlan1 unassigned YES NVRAM up up
Loopback0 172.16.1.1 YES manual up up
Dialer0 unassigned YES manual up up
NVI0
'show version'
Casino#sh ver
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15))
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jan-08 13:05 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YH12, RELEASE SOFTWARE (fc1)
Casino uptime is 52 minutes
System returned to ROM by reload at 17:09:25 UTC Fri Jul 1 2011
System image file is "flash:c181x-advipservicesk9-mz.124-15.T3.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1812 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of m.
Processor board ID FHK120622J3, with hardware revision 0000
10 FastEthernet interfaces
1 ISDN Basic Rate interface
31488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Thanks again for your help,
Josh -
Why is apple - the most innovative company that pioneered customer experience- not making it easier to find out if IPhone is locked or unlocked? it should be simple to find this status on the phone. I have to go thru so much trouble to find out if the phone is unlocked or not. There should be a much simpler solution to this.
call them, tell them you NEED a new battery installed, and they need to tell you when they can do it. That is their job to help you! Give pushback if necessary.
-
I can't see the menu bar in PSE 9 Organizer. Where File Edit View Window Help should be
I can't see the menu bar in PSE 9 Organizer. Where File Edit View Window Help should be
Check your Windows Display Preferences, and make sure you're using the default, 100%, smaller screen fonts.
Ken -
Help with a simple program.
I need some help writing a simple program. Can anybody help??
thanks to all.
2. HTML Java Source Code Reserved Word Highlighter
Write a program that inputs a Java source code file and outputs a copy of that file with Java keywords surrounded with HTML tags for bold type. For example this input:
public class JavaSource
public static void main ( String[] args )
if ( args.length == 3 )
new BigObject();
else
System.out.println("Too few arguments.");
will be transformed into:
<B>public</B> <B>class</B> JavaSource
<B>public</B> <B>static</B> <B>void</B> main ( String[] args )
<B>if</B> ( args.length == 3 )
<B>new</B> BigObject();
<B>else</B>
System.out.println("Too few arguments.");
In a browser the code will look like this:
public class JavaSource
public static void main ( String[] args )
if ( args.length == 3 )
new BigObject();
else
System.out.println("Too few arguments.");Here is something that may get you started...
import java.io.*;
import java.util.*;
public class HtmlJava{
public static void main(String arg[]){
if(arg.length!=1){
System.out.println("Usage java HtmlJava sourceFile");
else
new HtmlJava(arg[0]);
HtmlJava(String source){
try{
BufferedReader sourceReader=new BufferedReader(new InputStreamReader(new FileInputStream(source)));
BufferedWriter writer=new BufferedWriter(new OutputStreamWriter(new FileOutputStream(source+"Html.txt")));
Vector keywords=new Vector();
addKeywords(keywords);
String line;
StringTokenizer tokenizer=null;
String word;
while((line=sourceReader.readLine () )!=null){
tokenizer=new StringTokenizer(line);
while(tokenizer.hasMoreTokens()){
word=tokenizer.nextToken();
if(keywords.contains(word)){
writer.write(""+word+" ");
else{
writer.write(word+" ");
writer.write("\r\n");
writer.close();
sourceReader.close();
System.out.println("Output File written to "+source+"Html.txt");
catch(Exception ex){
ex.printStackTrace();
private void addKeywords(Vector keywords){
keywords.addElement ( "abstract");
keywords.addElement( "boolean");
keywords.addElement( "break");
keywords.addElement( "byte");
keywords.addElement( "byvalue");
keywords.addElement( "case");
keywords.addElement( "cast");
keywords.addElement( "catch");
keywords.addElement( "char");
keywords.addElement( "class");
keywords.addElement( "const");
keywords.addElement( "continue");
keywords.addElement( "default");
keywords.addElement( "do");
keywords.addElement( "double");
keywords.addElement( "else");
keywords.addElement( "extends");
keywords.addElement( "false");
keywords.addElement( "final");
keywords.addElement( "finally");
keywords.addElement( "float");
keywords.addElement( "for");
keywords.addElement( "future");
keywords.addElement( "generic");
keywords.addElement( "goto");
keywords.addElement( "if");
keywords.addElement( "implements");
keywords.addElement( "import");
keywords.addElement( "inner");
keywords.addElement( "instanceof");
keywords.addElement( "int");
keywords.addElement( "interface");
keywords.addElement( "long");
keywords.addElement( "native");
keywords.addElement( "new");
keywords.addElement( "null");
keywords.addElement( "operator");
keywords.addElement( "outer");
keywords.addElement( "package");
keywords.addElement( "private");
keywords.addElement( "protected");
keywords.addElement( "public");
keywords.addElement( "rest");
keywords.addElement( "return");
keywords.addElement( "short");
keywords.addElement( "static");
keywords.addElement( "super");
keywords.addElement( "switch");
keywords.addElement( "synchronized");
keywords.addElement( "this");
keywords.addElement( "throw");
keywords.addElement( "throws");
keywords.addElement( "transient");
keywords.addElement( "true");
keywords.addElement( "try");
keywords.addElement( "var");
keywords.addElement( "void");
keywords.addElement( "volatile");
keywords.addElement( "while");
}Hope it helped -
Just got an iPad mini. In mail I want to create a folder to save certain emails. I'll call the folder "Saved". Should be simple, right?
For IMAP mail like Gmail, you can use the Edit button to create new folder. It doesn't work for POP mail.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/b854a6bf48a788257c1 b33ae4e628148.jpg -
Just got an iPad mini. In mail I want to create a folder to save certain emails. I'll call the folder "Saved". Should be simple, right?
Yes ... and it is
Since you're in the Mountain Lion forum, it is indeed simple to create a "Saved" folder on your Mac and save emails into it. You should create the "Saved" folder using Finder.
The fact that you just got an iPad mini is completely irrelevant to the discussion as it stands. -
pls i need help for this simple problem of my palm os zire 72. pls share your ideas with me.... i tried to connect my palm os zire72 in my desktop computer using my usb cable but i can't see it in my computer.. my palm has no problem and it works well. the only problem is that, my desktop computer can't find my palm when i tried to connect it using usb cable. is thier any certain driver or installer needed for it so that i can view my files in my palm using the computer. where i can download its driver? is there somebody can help me for this problem? just email me pls at [email protected] i really accept any suggestions for this problem. thanks for your help...
If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.
-
This should be simple, but its driving me crazy. I'm trying to do a simple dissolve between a series of still images in IMovie (similar to what you get playing a slideshow in IPhoto). The closest I've gotten is using the Cross Dissolve transition, but it always dissolves, then you get a sudden jump to full strength photo. I just want it to dissolve from one image to another. I've tried every possible settings I can think of. Why is this so difficult?
Hi John,
first: make sure clip#1 and clip#2 are long enough to apply any transition (you cannot add a 10sec disolve to two 2sec long clips... hm? )
second, you have done as discribed here? -
Need help with a simple program (should be simple anyway)
I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
public void actionPerformed(ActionEvent evt) {
text1.setText(" ");
text2.setText("RE: ");
text3.setText(" ");
public Message() {
super("Write a Message - by Kieran Hannigan");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(370,270);
FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
setLayout(flo);
//Make the bar
JMenuBar bar = new JMenuBar();
//Make "File" on Menu
JMenu File = new JMenu("File");
JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
JMenuItem f2 = new JMenuItem("Open");
JMenuItem f3 = new JMenuItem("Save");
JMenuItem f4 = new JMenuItem("Save As");
JMenuItem f5 = new JMenuItem("Exit");
File.add(f1);
File.add(f2);
File.add(f3);
File.add(f4);
File.add(f5);
bar.add(File);
//Make "Edit" on menu
JMenu Edit = new JMenu("Edit");
JMenuItem e1 = new JMenuItem("Cut");
JMenuItem e2 = new JMenuItem("Paste");
JMenuItem e3 = new JMenuItem("Copy");
JMenuItem e4 = new JMenuItem("Repeat");
JMenuItem e5 = new JMenuItem("Undo");
Edit.add(e5);
Edit.add(e4);
Edit.add(e1);
Edit.add(e3);
Edit.add(e2);
bar.add(Edit);
//Make "View" on menu
JMenu View = new JMenu("View");
JMenuItem v1 = new JMenuItem("Bold");
JMenuItem v2 = new JMenuItem("Italic");
JMenuItem v3 = new JMenuItem("Normal");
JMenuItem v4 = new JMenuItem("Bold-Italic");
View.add(v1);
View.add(v2);
View.add(v3);
View.addSeparator();
View.add(v4);
bar.add(View);
//Make "Help" on menu
JMenu Help = new JMenu("Help");
JMenuItem h1 = new JMenuItem("Help Online");
JMenuItem h2 = new JMenuItem("E-mail Programmer");
Help.add(h1);
Help.add(h2);
bar.add(Help);
setJMenuBar(bar);
//Make Contents of window.
//Make "Subject" text field
JPanel row2 = new JPanel();
JLabel sublabel = new JLabel("Subject:");
row2.add(sublabel);
JTextField text2 = new JTextField("RE:",24);
row2.add(text2);
//Make "To" text field
JPanel row1 = new JPanel();
JLabel tolabel = new JLabel("To:");
row1.add(tolabel);
JTextField text1 = new JTextField(24);
row1.add(text1);
//Make "Message" text area
JPanel row3 = new JPanel();
JLabel Meslabel = new JLabel("Message:");
row3.add(Meslabel);
JTextArea text3 = new JTextArea(6,22);
messagearea.setLineWrap(true);
messagearea.setWrapStyleWord(true);
JScrollPane scroll = new JScrollPane(text3,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//SpaceLine
JPanel spaceline = new JPanel();
JLabel spacer = new JLabel(" ");
spaceline.add(spacer);
row3.add(scroll);
add(row1);
add(row2);
add(spaceline);
add(spaceline);
add(row3);
setVisible(true);
public static void main(String[] arguments) {
Message Message = new Message();
}persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Should be simple, pls help - selectOneChoice valueChangeEvent not fired
Hi all, please help! This should be so simple and just work, but I couldn't get it after hours!
I have a simple selectOneChoice tag in my jspx page, with two selectItems with static values - nothing fancy. I just couldn't get the valueChangeEvent associated to it to fire. I have read many posts here, some say that's how it works if the backing bean scope is request because it's got reset back to the default value each time so value never got changed. Yes my backing bean is set to request scope, but it didn't look like it tried to set the default value every time I submit the form, when I tried to set the value to a variable in the backing bean and its getter didn't get called after the form is submitted (it got called the first time the page loaded). For other reasons, I can not set the bean scope other than Request. Please help if you have an idea -
<tr:selectOneChoice label=""
binding="#{backing_eef_expenseapprove.selectOneChoice1}"
id="selectOneChoice1"
unselectedLabel="#{resources['ets.select']}"
valuePassThru="true"
value=""
autoSubmit="true"
valueChangeListener="#{backing_eef_expenseapprove.valueChangeApprove}">
<f:selectItem binding="#{backing_eef_expenseapprove.selectItem3}"
id="selectItem3"
itemValue="1"
itemLabel="Approve"/>
<f:selectItem binding="#{backing_eef_expenseapprove.selectItem4}"
id="selectItem4"
itemValue="2"
itemLabel="Reject"/>
</tr:selectOneChoice>
By the way, I used JavaScript alert to test the values are actually changed every time I switch the dropdown.
Just in case you are wondering, the application was a 10g ADF app, migrated to 11g, all components are now Trinidad. As far as I can tell, that shouldn't matter.Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If basic troubleshooting fails to resolve the issue, the next step is to take the device to Apple or an Apple Authorized Service Provider for evaluation.
Apple does not repair devices.
iDevices are not user servicable.
Any attempt by a 3rd party to repair the device will void the warranty and all rights to support from Apple and these forums. -
Help with tables (should be simple...)
I'm trying to use a Table component as a spreadsheet template in my app:
I'd like the first column to be static-y labels (such as Sunday, Monday, etc.) and the rest of the columns to be bound to a relational data source. I thought that I could just create a simple String array of labels in the session bean and then wrap that array with an Object Array Data Provider on the page and bind the table column to the Object Array Data Provider. Doing this doesn't give me the desired/expected results, namely the first column displaying the labels. What am I missing? I can't seem to visually wrap an Object Array Data Provider around anything other than a bult-in DataType array (String, Integer, etc.) and the only properties of the String array that I can choose from for the column are CASE_INSENSITIVE_ORDER, bytes and empty??
Thanx in adv.
-JakeI cross-posted and received a reply on the Netbeans - J2EE Nabble forum: http://www.nabble.com/help-with-tables-%28should-be-simple...%29-tf3574200.html
Essentially, the reply points me to this Tutorial Diva article:
http://blogs.sun.com/divas/entry/using_the_object_array_data
Parenthetically, what are are the audiences of the Nabble forum vs. this forum? It seems (to me at least) that there is a lot of overlap in the Creator/VWP topics. Which forum is more active? Does anyone find that the Creator audience is migrating to the Netbeans VWP forum? I seem to be getting better responses to my queries on that forum, but that may be due to the nature of my (admittedly newbie-ish) posts. -
Please Help this query should be simple :)
Here is what I have written so far: Basically I want it to return all the locations like I have specified that do not have DA-REPL in the area_code table but it is just returning everything it seems.
select l.location_no, l.zone_code, la.area_code
from move.location l, move.location_area la
where la.location_no = l.location_no
and l.zone_code = 'Z-BIN'
and (l.location_no like '%%-%%-2%%' or l.location_no like '%%-%%-1%%')
and la.area_code != 'DA-REPL'
order by 1
Here is what my results look like:
60-02-101 Z-BIN WA-60
60-02-101 Z-BIN WA-BIN
60-02-101 Z-BIN WA-BINRESV
60-02-101 Z-BIN WA-PALLET
60-02-102 Z-BIN WA-60
60-02-102 Z-BIN WA-BIN
60-02-102 Z-BIN WA-BINRESV
60-02-102 Z-BIN WA-PALLET
60-02-201 Z-BIN WA-60
60-02-201 Z-BIN WA-BIN
60-02-201 Z-BIN WA-BINRESV
60-02-201 Z-BIN WA-PALLET
Edited by: 906043 on Feb 20, 2012 2:23 PM906043 wrote:
At it's most basic the query would look like this but this gives me 67,834 results I am dealing with a pretty big warehouse with many "la.area_code" entries I am only trying to get the locations in a specific zone('Z-BIN') that do not have 'DA-REPL' as an la.area_code as this would cause that location never to get replenishments when it becomes empty.
select l.location_no, l.zone_code, la.area_code
from move.location l, move.location_area la
where la.location_no = l.location_no
l.zone_code = 'Z=BIN'
and la.area_code != 'DA-REPL'
order by 1
Not sure if that helps anymore I am at a loss but still plugging away :)A little attention to code formatting could bring some sanity to yourself. Enclosing that formatted code in the code tags on this forum would bring a lot of sanity to those trying to help you:
select l.location_no
, l.zone_code
, la.area_code
from move.location l
, move.location_area la
where la.location_no = l.location_no
l.zone_code = 'Z=BIN'
and la.area_code != 'DA-REPL'
order by 1And once it is formatted for easier reading by humans, it's easier to see that you are missing an "and" (maybe "or"?) in your WHERE clause.
Maybe you are looking for
-
Follow-up to HP Photosmart C6180 Scan Problem
I posted the below a few days ago and since then have spoken with a few people who have experienced the same difficulty. We came to the conclusion this problem began after a recent driver update from Apple (sorry we can't remember exactly which one-a
-
Airport Express and Windows 98
I have read in other posts that it is possible to connect windows 98 to airport express. Can anyone provide step by step directions on how to do this? Thanks
-
IF...ELSEIF
Hello, Im having trouble placing IF and ELSEIF in the right place. Basically I need IF 'A' = 1000 then do this... ELSE IF "A"= 2000 then do this..... I have to add "IF" before CASE and the ELSEIF to continue with statement. This is what i have now! S
-
Friday Apr 25 while traveling south between Eckert and Fredricksburg TX on 16 I asked Google Maps to locate me. Three time over about ten minutes it told me I was in England. Where I was: http://maps.google.com/?ie=UTF8&ll=30.347695,-98.787346&spn=0.
-
Error Connecting to Access 2007 database
Hi there, We are seeing the below error when trying to Connect to Access 2007 using Crystal 2008, when using the Access/DAO connection wizard .. Logon failed Details: DAO Error Code: 0xd0f Source: DAO.Workspace Description: Unrecognised database form