Zoom in and pan trough video during playback?

Hi,
is it possible to zoom in and pan trough video files during playback on iphone 3gs? I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback? Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
Thanks

I is it possible to zoom in and pan trough video files during playback on iphone 3GS?
Yes.
I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback?
Yes. Three-fingered double-click to turn it on or off. Three-fingered drag to move the zoomed image.
Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
The video will have been compressed for use on the iPhone, so zoom may help, but it won't be able to show detail that was lost in the compression.

Similar Messages

Recording Zoom factor and Pan position for intensity graph (LV8.2/8.5)

I'm using the zoom and pan features on the graph palette. I need a way to determine the zoom factor and pan position so as to reapply these to another intensity graph. Any way to do this?
Thanks,
Don

Can't you just copy over the Xscale.range.min|max and yscale.range.max|min?
LabVIEW Champion . Do more with less code and in less time .

Two Second Skip Switching Between Windowed and Full Screen Modes During Playback YouTube videos

I am finding that every video I watch skips two seconds every time I switch back and forth from Full Screen mode. Happens mostly with 720p videos in YouTube.
Can be replicated by pausing the video (also possible during playback, pausing it was just to determine how long the skip is), switching to Full Screen and back, noticing the two second change on the timer.
Main operating environment is Opera browser on Windows 7 (x86), Flash ver. 11.1.102.55 and 12beta. I have also been able to replicate the problem on Internet Explorer ver. 9.0.8112.16421

I see about 30-80 MB memory usage increase while switching to fullscreen and it is falling back while switching back to normal mode.
I think the "freeing" of the memory is to agressive and produces such "lags."
@Adobe: This should be optimized with the next versions.
Update:
With the Plash Player plugin (Firefox Nightly/Opera Next) it is worse and with Active-X (IE9) it seems to be ok.

Encore CS4 Missing Frames/Stops Starts and Blue Screen Crashes During Playback

I'm opening Premiere Pro CS4 with the default presets of HDV Capture, HDV 1080i30 software only mode. I'm capturing from my Canon HV20 using firewire HDV out 1440 x 1080. All goes well during the editing process but when I Dynamic Link and playback in Encore CS4 I observe dropped frames or stop and starts in Encore timeline sequence. At times I may even crash Encore with a Blue Screen. While still running Encore I can go back to Premiere Pro and play the timeline sequence with no issues. I will mention that I have the Matrox RT.X2 installed. But when starting a project I'm doing software only and disabling RT.X2 hardware playback. If I remove all effects in the timeline sequence and then Dynamic link to Encore the playback is normal with no effects. I did exported the Premiere Pro CS4 project using Adobe Media Encoder CS4 with a setting of MPEG 2 Blu-ray 1440 x 1080i 29.97 High Quality. I than import this MPEG2 back into Adobe Encore CS4 and it plays without dropping frames or hang-ups.
Build
Case: Coolmaster-830
Op System: Vista Ultima 64 Bit
Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
Performed updates on all Adobe Production Premium Products as of 01/12/2009
Matrox RTX2 4.0 Tools
Main Display: Dell 3007 30"
DVI Monitor: Dell 2408WFP 24"
MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
PS: Corsair|CMPSU-1000HX 1000W
CPU: INTEL Quad Core Q9650 3G
MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
Cache SATA 3.0Gb/s
2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

Try to remember this:
Encore "Tries" to playback from premiere pro. If you have a full set of previews available, it will play those, but you are probably seeing a lot of dropped frames and choppy video if your previews in premiere are set pretty low. What you can do to combat this--in my experience--is export your video from premiere into a whole file in full format (in a non-lossy format with full frames, and in it's proxy equivalent; I use Prores LT for many projects, and export that as a final output from premiere), then have that encode in an h.264 format (which will maximize smooth motion and quality playback). Now... ...In your encore project, you should be outside of your original formats and in the intermediary that encore will recognize, so you should have it "Locate transcoded file". Once you have done so, it will playback that movie in the preview. I've done it. With CS6 and 4gb ram with a vidcard at 256mb and a core2duo 2.16ghz, it plays fine. With CS4 the encoding takes a while, and if you go to dvd, even longer for compression to work properly. I use Compressor to output AVCHD .264 stream and an AC3 file. When I locate the transcode for BD, I locate the .264 file first, then I get asked for the AC3 file. This allows me to import them both, and have Encore encode them into the transport stream without transcoding. I use Distributed processing to get the job done quickly, as I have minimal access to several computers and have connected them by that method for a Render Farming setup. It works well. With a hardware based device playing back your files, you won't see the same performance in Encore. It has to make two hops already to get to your video, and adding a third (goes from encore to Premiere, then to codec, then plays normally; third step is to external hardware, which eats up processing like crazy when it has to come all the way back to an encoding output to screen through encore, adding more steps for the system along the way) really can slow down the performance in Encore. IF you take the Steps out by encoding a finished playback stream, Encore will handle it quickly with it's own processing. It really does work well. If you don't like it, make your changes in Premiere, then re-encode with your hardware and make an h.264 file for encore again. You can use AME, but you'll always get standard Blu-ray (old file-stream format; lesser res and quality). You can use Compressor to make AVCHD which allows for 264 output that is PSF or progressive that is interpreted as simultaneous fields (fake interlace), or even solid progressive formatting for AVCHD compatible players, and you can render-farm it to speed up the encoding process.

Super thin black border showing around video when I zoom out or pan the video...

Hi all,
I have a video I'm making in Adobe Premier Pro CS5.5. I am using 2 video slots in Premiere Pro's sequence area. A white image is in "Video 1" spot and a video is in"Video 2" spot.
The white image in "Video 1" slot is the exact same color as the background color of the video in "Video 2" slot.
The reason for this is when I zoom the video out or pan it slightly off the screen I just want it to look like the video is moving (and I don't want anyone to be able to see the black backdrop that is normal background color on a Premiere Pro video).
After I go to effects control, and change the position and scale of the video; the video scales out and pans over fine ...however, the border of the video shows slightly ...even flickers a little. Is there a way to get rid of this thin black border line? ..So no one can tell where the video (in "video 2" slot) ends and where that white background I have in "video 1" is ...by removing this flickering border?
Here's a Screencast of the issue. I point at that thin border I'm talking about when I pan the video over (which reveals the white backdrop):http: Screencast.com/t/45xp0bQ82f
Thank you so much for any help you can provide. I appreciate it.

CROP effect
Jeff Pulera
Safe Harbor Computers

IMovie Project seems to skip and pause very briefly during playback

I am creating a video montage in iMovie '09, though when viewing the project during playback the video does not play smoothly and seems to skip and pause very briefly while continuing to play. Each clip separately played smoothly prior to its addition into my iMovie project.
Any suggestions would be greatly appreciated. Thank you.

What kind of clips are these?
Specifically, if you right-click on a clip in the Event Browser and select "Reveal in Finder", then right-click on the clip in the Finder and select "Open with...QuickTime Player, and then hit Command-I in QuickTime Player to open the Inspector Window, what codecs are mentioned next to the word "Format:"?

Shaky video during playback

I have some HD video I shot with my Cannon T1I that I converted to AIC files using MPEG Streamclip. After doing some editing in FCE, I used quicktime to view the files. During playback of the footage I noticed the footage was shaking quit bad, which made it hard to view. I've done this process before without the shaking, so I'm not sure what happened.
I converted the files to AIC files and used 29.97 fps.
Any help would be appreciated!
Thanks,

I wonder if this the case as I had the resolution qualities mazes out. I'll watch them again in full screen mode and my tv to compare.
I do have perian installed. Not sure if I've updated it since snow leoppard.
Thanks guys!!

How do i zoom in and out while videoing

how do i zoom in and out while i am videoing

There is no built-in zoom function for video.
So, you can either quickly run closer to the subject to zoom in, and quickly run back to zoom out, or use an alternative video capture app, such as:
http://itunes.apple.com/us/app/video-zoom-2/id406643501?mt=8#

Ran Software Updates and Now Drop Frames during Playback

I updated all of my Software back in late December. Since I have updated, all projects (old and new created ones) within Final Cut drop frames during playback. I had no issues with drop frames until I ran the Software Updates. Currently running Leopard 10.5.6, Final Cut 6.0.5, Quicktime 7.5.5. Any suggestions on how to determine why I now have drop frames. Is there an easy way to revert back to software that was in place prior to me running Software Updates on 12/22/08?
Thanks in advance for your comments and suggestions.
Jim Bob

ZRose:
First, you should have an up-to-date tested reliable backup. The best way to do it is to get an external Firewire HDD, clone you entire computer to is using SuperDuper, then keep it up-do-date.
Next, get in the habit of doing regular maintenance procedures. Here are some links to help.
Macintosh OS X Routine Maintenance
Mac OS X 10.3/10.4: System maintenance
Maintaining OS X
For the probably immediately at hand
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
BGreg's suggestion to install the Combo update is a valid fix. Remember to Repair Disk Permissions before and after installation.
Please post back with further questions or comments.
Good luck.
cornelius

Washed out video during playback in ie9

I've got win7-64bit, with ie9 installed. Video playback using flashplayer 11 allows the audio portion to come through fine, however, the video is washed out almost completely! It plays, but the contrast is way off! It's almost completely white! When I click over to full screen mode (when it allows) it is just fine. Have had it occur on 2 different websites, that before were playing just fine.
Like I said, the video plays, but contrast is completely off! When the video is stopped, it is clear as day.
Am at wits end trying to determine what has happened.
Yes, I have turned hardware acceleration on/off. I have unstalled/installed repeatedly. Have managed add ons. Have read all the forums concerning video playback and have tried EVERYTHING that they suggested (except install ie8, then reinstall ie9; won't let me do that).
Thanx for any comments/suggestions.

Nice to hear/see that this is working now.
Please can you vote here
https://bugbase.adobe.com/index.cfm?event=bug&id=3287974
and
https://bugbase.adobe.com/index.cfm?event=bug&id=3335907
Thanks

Freezing video during playback HELP!

I have a problem with video freezing for a split second on playback of DVD. I finished two projects (44 min and 32 min) on G4 dual processor, then moved over to new G5 with FCP Studio...upgrade. I finished editing and then went to export using compressor, then import into DVDSP. When I play on several diff players, the video freezes for 1/3 of a second about a minute into the first video and about 16 sec into the second video...they were compressed at 90min best quality DVD 4:3 in compressor, AC3 2.0 dolby audio, and both put on the same DVD, with final size at 4.2 gig, burning on HP 8x media. What am I doing wrong? I previously had burned a DVD with the first 44 min version on my G4 with no problems! I just want to be able to use my new machine...
Someone mentioned to ouput a MPEG2 file out of FCP5 first, instead of exporting into compressor...I tried to do this but got an error that my DVD SP has to be serialized first to output MPEG2 ...I purchased a FCP Studio upgrade...shouldn't it already be serialized? Or maybe I don't know what that means...anyway
By the way, what happened to the DVD 60 min best quality encoding in compressor that was in the earlier version?
Someone else mentioned to use toast to burn....but how do I get my FCP to ouput MPEG2 as a quicktime conversion? Or do I have to output a FCP movie and then import into Toast? (I am waiting for my Toast to come in the mail)
I used FCP Studio, DVDSP 4.0.3, Compressor 2
DVD pref - BEST video 1 pass, and 2 pass
Power Mac G5 quad
Nvidia Quadro FX 4500 graphics
6.5 gigs Ram
2-Seagate 500 gig internal HDs
2 Lacie 500 gig exteranal HDs
AJA LHe
30 Cinema Display
G5 Quad Mac OS X (10.4.4)
G5 Quad Mac OS X (10.4.4)

Start by updating your OS to at least 10.4.9 and install QuickTime 7.2.
The 7.2 update fixes many G4 playback issues.

How do I get my ipad2 to play the music videos as video during playback in music similar to my iPod?

I would like to play back all my music and music videos together like on my iPod, but when I play the music videos from the music app, they only display a thumbnail picture when the video is playing. I like to mix up my audio only songs with my music video songs. Do I need a separate app to acomplish this?

Did you check to see that shuffle is is turned off? To do this, while playing a song tap the cover art to reveal the additional controls if they are not already visible (see photo below). Then tap the shuffle button (bottom right) until it turns white (white is off).

AVCHD log and transfer jerky jumpy during playback

I've been given some files from a Sony HDR-CX12 to export to dvd. The files playback fine in the log and transfer window but stutter / jump in the viewer window and also when added to the sequence.
The files provided are
a AVCHD folder
a AVF_INFO folder
a DCIM folder
and two locked Unix executable files.
Final Cut Easy Set Up
Format - HD
Rate - 29.97
Use - 1080p30 FireWire Basic
Log and Transfer
Transcode to Apple ProRes 422
Final Cut Pro version 6.0.5
System
Os 10.5.6
processor 2 x 2.8 GHz quad-core Intel Zeon
Memory 14 gb
Hard drive containing files is internal.
side note - i did migrate the system from a PowerPC but have since updated the lastest FCP update.
If anyone has any help or tips to get these files playing back properly I'd really appreciate hearing from you.

Do you have Perian installed? I had the same problem, but when I disabled Perian in the System Preferences panel and re-transfered the footage, everything looked fine. Once your footage has been re-transfered, you can re-enable Perian.

No video during playback for Source or Program

I have Macbook Pro 2.6 i7 with 16gb RAM and I am running Premiere Pro CC 7.1.0
I am playing back video and seeing nothing I can hear it fine. Any thoughts?

What is your graphics adapter (AMD or nVidia) and what is your device driver version?
There have been "some" recent messages that the latest nVidia driver causes problems, and using an older driver is the fix
Also, exactly what are you editing?

Getting audio but not video during playback using Airplay-

I'm using my iPad 3 to stream content from my Amazon Prime video account the via Airplay to my Apple TV. I'm getting the audio, but not the video. Are these units capable of doing what I'm trying to do, do I have to set up certain settings to do this? Help!!!

How do you know or find out if that's indeed what they're doing of if something is after all technically awry?

Zoom in and pan trough video during playback?

Similar Messages

Maybe you are looking for