Zoom in Survey Mode

It would be quite useful to be able to zoom the image reslolution in survey mode the same way we can in compare mode.
This would speed, among other things, the ability to scan a group of images at the same time at 1:1 resolution to eliminate those that are fuzzy.

Still no zoom in survey as of LR3 (unless I missed it - please correct me if I am wrong).  Still think this would be a nice, time-saving feature.
Jeff

Similar Messages

  • Zooming in Survey Mode is not sharp

    I'm using LR 4.1. When in survey mode, if I select an image and hit Z the resulting 1:1 image is not sharp. If I zoom in or out and back to 1:1 it becomes sharp. This is not a problem in Loupe mode. It's not a delay issue - it never becomes sharp unless I change the zoom level. I have 1:1 and standard previews pre-generated.
    Any ideas?
    Thanks,
    Larry

    As are as I know, I didn't have 1:1 previews for this image. I know I wasn't in Loupe at 1:1 with this image in this session either. When I first went into Survey mode and zoomed to 1:1 the image was pixelated, but I had the "Loading..." message appear at the bottom. After about 5 seconds the 1:1 preview was built and displayed the sharp image.

  • How to zoom in Survey mode?

    Suppose I have 6 photos tiles in "Survey" mode.
    How do I do a simultaneous zoom and pan, so zooming in on one photo zooms all the other ones, and dragging one photo drags around in the others?
    Zooming in on one photo loses the tiling effect of "Survey" mode, making it impossible to do a side-by-side comparison.
    Since the tiles are basically large thumbnails in size, it seems that there is no way to do a zoomed-in comparison in "Survey" mode.

    Well, Jay is correct, although you can do something like it...sorta. If you use "Compare" mode instead of Survey, you will initially see two panels showing just the first two images from the ones you wish to "survey". Then you can click (or use slider) to zoom (with synchronization) both the "select" and "candidate" images; and finally-- by use of the arrow keys-- you can see your additional images appear, sequentially, in the "candidate" panel. So you essentially get a zoomed pairwise survey. Not really what you want, but...
    Phil

  • Blurry images when zooming in Survey & Grid View

    When I am in Survey View and hit the Z key, some of  the previews are blurry.  The same thing happens in Grid View.  However, in Loupe View, the images are fine when I the 'Z' key.  Using Survey View would make things go faster when making my picks.  Any ideas why this happens?
    I tried rendering 1:1 but the returns a mesage that says renders are up to date and rendering was done.

    cppasm wrote:
    This is definitely a bug. I can see it too, and it's little bit annoying. LR 4.1, Win7 x64.
    To reproduce just select two images, render 1:1 previews to be shure they are present.
    Then press 'N' to switch to Survey mode, and now press 'Z' to zoom in active photo.
    It gets zoomed, but looks like LR zooms in standard (smaller) preview instead of using 1:1 preview - the result is blurry and a little pixelated, it definitely lacks resolution.
    But when in the Loupe view (switch view using 'E') and zooming all work just fine - the image is at full resolution and is sharp.
    And even if I switch from Survey to Loupe with zoomed in image - it still stays blurry.
    To get sharp image I need to zoom out and then zoom in again.
    So in short - it looks like 1:1 preview is used only when image is zoomed in from the Loupe view.
    At least others seem to experience the same thing so I know it's not just me.  I'd say it's more than a little bit annoying because it causes you to second guess yourself and you constantly have to switch to a view to see if the image is actually sharp or not.  It really slows down the workflow.

  • Survey mode: Advance multiple images keystroke??

    Hi All,
    I have requested this feature since Version 1 beta, so I'm hoping that maybe it has showed up in LR v2 and I've missed the conversation here thus far.
    Example: I have multiple images opened up in 'Survey' mode, let's say 4 mages. Which on my Apple 23' Cinema Display makes for much nicer size reviewing, than the largest 'Thumbnail' setting.
    The basic ability to hit a combo-keystroke, and advance all the frames at once in 'Survey' mode, to the next set of images of that same total. You know, same as 'page up' or 'page down' in the thumbnail view in the Grid.
    Now, I know IiView Media Pro could do this several years ago, before Microsoft turned it into 'Expressions Media', with 4 images at a time. And like I said, I've been requesting it since early LR beta 1. You know, just add a 'Shift' to the Page Up/Down function keys. Or 'Option' or "Control' key.
    So, have I missed this feature? I've been exploring the keyboard tonight and found that 'Shift and 'Option' will get you variations on multiple or extra images, as they did in LR 1. But you still can't advance them as a group to the next set of , like I said 3,4, 5 or 6 images at a time. I've tried keyboard-adds with the Page Up/Down buttons, but got nothing there either. This is pretty cool on monitors larger than 20" or so.
    I love the Survey mode, but surely we can advance a half-dozen images at a time, instead of adding or subtracting one image at a time.
    Hoping there's an 'Shortcut' here I've missed. :)
    Thanks
    -Sol

    Hey Wolf,
    As I mentioned, I have, at least twice since early 'LR beta 1' asked for this feature. It's crazy that the feature isn't there. As I mentioned, in Expressions Media (going back to iView Media Pro), not only does it allow up to four images to completely fill your screen, regardless of screen size, but they will advance to a new set of images, all at the same time. And it also allows you to zoom up to four images at the same time. As LR does in the 'Compare' mode.
    I will re-post this over in the 'Feature Request' section, but like I said, I was hoping it had been added as a keystroke combo in LR 2, and that maybe I had just missed it.
    Thanks for responding.
    -Sol

  • Survey Mode not working correctly

    When I select a number of images to survey and flag one of those images, all images in survey mode are flagged making the culling process extremely difficult.  This only started happening since upgrading to LR 4.2  Any solutions?  Is it a bug?  May have to resort to LR 4.1 until fixed

    Thank you, thank you, thank you.  That was driving me nuts.
    Just for the record - auto-sync was on, so I switched it off which did the trick, either way, you solved my problem

  • Reordering images in Survey mode

    What are the restrictions on rearraging images in Survey mode? I could not figure out why it would sometines work and sometimes doesn't.
    For example, I have a main top directory 2012 and in it a folder for each month. If I am in GRID view at the 2012 level and choose images in Survey mode, I cannot rearrange them. But I am in GRID view in one of the subfolders, then I can.
    Is this normal? Am I doing anything wrong?

    Here are some helpful tutorials:
    http://tv.adobe.com/watch/learn-lightroom-4/working-in-survey-view/
    Survey View is simply a method you use to pick the best image from a sequence and has no other purpose
    Read more: http://digital-photography-school.com/choosing-images-using-survey-view-in-lightroom#ixzz2 3dKcxNXA
    Provided you are working with a Folder of images or a Collection (but not a Smart Collection, All Photographs or Previous Import), you can reorder images in Survey View. To do this, drag and drop an image into the position you want it to appear in the group.
    Read more: http://digital-photography-school.com/choosing-images-using-survey-view-in-lightroom#ixzz2 3dKldfIQ
    see the above
    -janelle

  • Labels in Survey Mode in LR2

    I am in Survey Mode (secondary display) and I have three photos displayed.. I choose one of the three as "most selected" and I click on the label icon at the bottom of the photo I like and apply a color label. Instead of it being applied to just the most selected photo it gets applied to all the photos.
    Is that the way it was designed to work or am I misunderstanding the process in survey mode?
    Not as useful as it would be if it just acted on the photo for the label icon I selected. And of course if you deselect the group they all disappear from the survey screen.
    It wouldn't be so bad if there was an overlay with file info in the survey screen so I could easily figure out which photos were the ones I choose.
    Lawrence

    Okay, I see now that if I change it to survey mode on the main monitor it doesn't apply it to all of them just the selected. Not intuitive but workable.
    Thanks
    lawrence

  • Rating now different in Lr6 Survey Mode. Why is this happening?

    After updating to LrCC / Lr6 I'm unable to rate images like I could before.
    In Lr5 my cull method was to pull ~10 images together in survey mode (N) and give each image either 1 star for 'reject' or 2 stars for 'keep'. With capslock on every time I give an image a rating it automatically advances to the next image. It was a FAST system for me. Now in Lr6 I give one image a rating and ALL the images in that group get the same rating. NOT useful. Any ideas on why that's happening now?

    Stealth can cause problems. These alerts may be normal, and would otherwise be no problem, except that you're running stealth. You will block/log many things that most networks just need to do.
    That being said...
    I'd recommend changing all security settings on this router that was unsecured for so long...who knows how much control this nosy neighbor has taken. (Why would anyone run an unsecured WiFi network in a neighborhood where they can see their neighbor? Think about it.)
    Bluetooth broadcasting 800 ft? Google for the answer to that.
    "not hip to...intervention"? huh?
    It's your network, and you're responsible for it.
    You should probably reset this AEBS to factory standards and get the security locked down snug (using a cabled connection) before you put it back on the air.
    Change the SSID, change the admin password, etc, etc.
    This neighbor sounds like he's taken advantage of your hospitality for the last time.

  • Accessing an Air AP1010 in survey mode

    I cant seem to find the right username and password for accessing the CLI in an Cisco Air Ap1010 E K9, running in "Survey" mode.
    Have already tried the most common, and I've tried to leave both blank.
    None of the accesspoints has been attached to a WCS.

    I would not suggest using the AP to do the survey. Instead you can use the Cisco Aironet client adapter CB21AG to perform the site survey.

  • Viewing pixel values in survey mode.

    Hi,
    In the Develop module, the histogram displays pixel values, updating dynamically as you mouse around over the an image in the preview area. Is there a way to enable this behavior in the Library module? Specifically, I'd like to be able to compare the pixel values of two or more images displayed in survey mode. Thanks,
    kobi

    Here is a piece of code I use:
    CREATE OR REPLACE PROCEDURE sm_list AS CURSOR emp_cursor IS
    SELECT d.department_name,
    e.last_name
    FROM departments d,
    employees e
    WHERE d.department_id = e.department_id;
    emp_record emp_cursor % rowtype;
    BEGIN
    FOR emp_record IN emp_cursor
    LOOP
    DBMS_OUTPUT.PUT_LINE(emp_record.last_name);
    END LOOP;
    END;
    With this example, I agree, the smart data is null. Logged a bug. However, note that I do see values in the data tab and can modify and watch these values.
    When using cursors I've been looping and then fetching into cursor records, i.e.:
    FETCH emp_cursor
    INTO emp_record;
    emp_tab(i) := emp_record;
    and then the values display in the Smart data and data tabs.
    Sue

  • Filters in survey mode

    I used to be able to put secondary flags/colors on individual images when I had a group selected in survey module but now when I mark and image with a color it applies it to all of the images in the survey not just the one highlighted

    Duplicate of I used to be able to flag images separately when I had some selected in the survey mode but now when I put a second filter on and image it does it to all of the selected images

  • Show info in Survey Mode

    On Survey Mode, I would like to be able to toggle on and off the info so
    that I can compare between images as I look at them.
    Rikk

    Can't see why Adobe didn't do it from the start.
    A nice touch would be shrinking the fonts automatically as you add more and more images to the Survey view and they get smaller and smaller (by default, in Loupe and Compare, the font pitch in Overlay is rather huge.).

  • Cisco 1572 Outdoor AP in Autonomous or Site Survey mode?

    Can a 1572 outdoor AP be put into an Autonomous mode, or at least a Site Survey mode so coverage areas and signal strengths can be tested without the need for a wireless controller?
    If so, is that what the sku "SW1570-UL01A01-K9   SW Cisco AP1570: Unified LOCAL" is for?  Seems like it would be, but not sure..
    Thanks!

    Got the answer to my own question... yes, it can be deployed in Autonomous mode... Installation guide lists this at the very end of the doc...
    http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1570/installation/guide/1570hig/1570_chinstallaccs.html

  • Survey Mode Bug?

    After shift clicking a group of images in Grid mode and then entering Survey Mode, I try to  flag one photo as  picked or rejected, but it does it to all of the photos versus just the one photo that is highlighted.  This wasn't occuring a few weeks ago but now it is.  I'm wondering if this is a bug with the new update?  I saw a reference to it on another blog:
    http://feedback.photoshop.com/photoshop_family/topics/lr_4_1_bug_reject_a_photo_in_survey_ mode
    I'm hoping it's just something that I've toggled on by mistake so that I can get back to using the survey mode effectively to cull my photos.  Thanks for your assistance.

    Any idea how this could have been triggered on?
    They are independent, but have the same keyboard shortcut - and the buttons look similar. Perhaps you accidentally activated it in loupe mode (loupe mode can look very similar to develop in overall GUI layout).
    P.S. There is an idea in the feedback forum to make enabled autosync more visible: http://feedback.photoshop.com/photoshop_family/topics/autosync_multiple_target_indication

Maybe you are looking for