Zoom is off and the screen is still too large...Help
I have turned the zoom off, adjusted the resolution....Not sure what else to so! I still can't see the top of my home screen!! Help
In the Display Preferences do you have the underscan turned off? Also on display turn overscan off.
Similar Messages
-
my iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help
Hi Ellen,
Welcome to Apple Support Communities.
It sounds like your iPhone 4 has a dim or blank black screen but responds to some commands like enabling vibrate. I understand this may be a frustrating situation, but the troubleshooting suggestions in the article below will help you solve the issue.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If your screen is too dim, too bright, or you see only faint images
Try to adjust the brightness. If the screen doesn’t respond when you adjust the brightness, open several apps to make sure it’s not an issue with only one app.
If you have a screen protector, try removing it. Try removing your case if it includes a screen protector.
If you see the issue in multiple apps, restart your device.
If restarting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Take care,
-Jason -
My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?
Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice. -
I dropped my Iphone 5 which resulted in it shattering and the screen was still on but it was black with only a white line through it so I couldnt access the phone however I switched over to my Droid and now I cannot send or receive messages and I cant turn off imessage because I cant see anything on the screen. Help?
Then the bottom of the support document states that if you do not have access to the device (which unfortunately because of the screen issue you do not) to contact Apple Care. That is what you need to do.
-
When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?
Anna...
Could be the graphics card.
Run the Apple Hardware Test -
When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!
If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number? -
my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?
I've tried that. It doesn't work. The only thing that happens is the apple comes up. I've tried holding the home as I'm plugging it in and keeping it held for a few minutes, but nothing happens. My iTunes doesn't even read that it's connected.
-
My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!
Restart your phone by holding the sleep/wake button and the home button until it starts back up.
-
i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808 -
My home button does'nt work and the screen is unresponsive too.
My home button does'nt work and the screen is unresponsive too.
Try a reset:
Hold the Sleep and Home button down (approximately 10 seconds) until you see the Apple logo.
Note: Data will not be affected. -
Since updating Iphone 4 the screen display is too large
Since updating my Iphone 4 the screen display is too large to fit on the screen. For example the green battery graphic is so large half of it takes up the full screen.
I pressed restore and restored the phone. I then restored my backup files and I still have the same problem.
Does anyone have any suggestions?This is asked and answered many,many times and is covered in the manual ( Zoom feature).
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Double tap with three fingers -
^Hi. yesterday, after trying to study on my iphone 4, i accidentally clicked okay on something that poped up while flipping through notecards. it told me that it was "updating", i had my phone updated to ios7 but not 7.0.2.. i tried to shut if off to see if it would stop the update, because i didnt want it to do that. after a few minutes i turned it back on and it was still updating. it then shut off and a screen poped up telling me to plug my phone into iturnes. itunes recognized my phone and said it was in recovery mode and i would have to restore it. i have tried to restore it three times and nothing has happened. it will go all the way through the restore process, say it is finished, and then nothing will happen. my phone will not stay in DFU mode, i have tried for 20 minutes to get it to. i have even uninstalled and reinstalled itunes. i dont know what to do and i have been without a phone for alomost 24 hours. how do i get my phone back to normal? can i fix it or could at&t replace it? or do i have to take it to an apple store? Please help me.
Has your phone been jailbroken in the past? If yes, this could be a reason for not being able to finish the restore process.
If not, did you try to restore it on a different computer?
Also check these articles again:
iOS: Unable to update or restore
DFU Mode -
When starting up windows from mac the resolution is too large, i then restart in windows and the resolution goes back too normal. How do i fix this?
Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.
-
A newer verion update for my iPod touch was taking place when I got knocked off line,Now,I have no connection to be able to use my iPod.Just a Black screen with the Apple insignia and an oblong circle that would have filled when the update was finished appears and the iPod won't turn on or off. What can I do to remedy the situation.?
Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097
-
Hi
My mini i pad has frozen. I cant turn it off or opporate the screen. I have a nessage on screan telling me my storage is full in i cloud but I cant navigate to settings or closeTry this to get rid of the message.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
My husband and I share an Itunes account so use the same email address and password. Our iphones are now connected and we get each other's messages and share each other's contacts. How can we stop this happening?
-
Should an abaper have knowledge of creating purachse order and sales order
should an abaper have knowledge of creating purachse order and sales order if so how to create pls help me thanks in advance
-
Changing field position at runtime
I am running forms 6.0.8.14.1 I have a field with a when-mouse-double-click trigger. When the user double-clicks the field I want the cursor to move to a field in a different block and display it over the current field hiding it. This works fine clie
-
Javascript error on Portal content
Hello I don't know whether this question is relevant in this forum but I am facing this while publishing web dynpro I-View onto Portal. When I go to link http://host:port/irj its opening Portal Content page with one Browse and Search tab. But nothing
-
Selecting multiple individual files
I saw something about this under the heading "moving multiple files" but got lost in the answer. if i want to select several things to move or copy or what ever in a list--whether it is multiple files, multiple emails (for example to delete them at t