Zoom level in WPF Application consuming Bing Maps Web Services

Hi,
I am having trouble in setting the zoom level for the map with 7 pushpins (P1 through P7). The map is centered with point P1. I want all the push pins to show on the map. I have set the zoom level as follows.
Zoom Level 15 - if the points (P2...P7) are within 1 mile from P1
Zoom Level 14 - if the points (P2...P7) are between 1.1 and 1.5 miles from P1
Zoom Level 10 - if the points (P2...P7) are > 1.5 miles from P1.
If there a better way (like autozoom) to do this?
Thanks.
Regards, Venkat

Rick,
I have attached the map generated using SOAP services.
I tried to generate the same map using REST services as follows.
http://dev.virtualearth.net/REST/v1/Imagery/Map/Road?mapSize=640,480&pp=36.150928,-83.439971;10;S&pp=36.171645820140839,-83.410888686776161;32;S1&pp=36.168693,-83.415779;32;S2&pp=36.185192,-83.435401;32;S3&pp=36.140907,-83.472549;23;L1&pp=36.174339,-83.425415;23;L2&pp=36.17805,-83.433433;23;L3&key=BingKey&format=jpeg
The REST services map looks like its zoomed in compared to the SOAP services map. However the road/street names are missing. Is there any way to get the road/street names in the REST services map like in the online bing maps? Please advise.
SOAP SERVICES MAP
REST SERVICES MAP
Regards, Venkat

Similar Messages

Several BizTalk applications consuming the same web service

When consuming a web service in Biztalk i use the generated items feature, using the service endpoint address. This creates binding files and service schema files. When trying to deploy the web service artifacts to BizTalk Server, and the files
already is deployed in an other Application, an error is raised. How do I solve the issue? What is best practice? A seperate BizTalk Application hosting the artifacts? Not good I suppose if the enterprise/customer has a limited lisence. A seperate "Proxy"
hosted in a .dll file, developed in e.g. c#? Probably a better solution, but kind of annoying having a lot of those lying around. Any suggestions?
By the way, I'm using BT 2009, if that matters.

John,
Avoid any situations of dynamic schema resolution, such as explicitly setting the document type
in the XmlDisassembler
Could you please explain some pitfalls for this ...i am doing this and wanted to know about it.
Every time when i ran in to schema resolution issue i tend to use dynamic resolution instead of app reference.
Thanks.

Consume an external web service with an ABAP proxy

Hello,
I'm working on creating an ABAP Proxy to consume my first web service. In searching SCN I haven't found a comprehensive list of steps to complete the process, but I have found information on generating a proxy from a WSDL and creating a logical port.
My first issue arises when I go to SPROXY to generate a proxy from a WSDL, I see the message 'Local objects only (No Connection to ESR)', and I have no ability to 'create'. The Enterprise Service Repository seems to be the new name for the Integration Repository, if that helps. Do I need the ESR installed to create a proxy?
A follow-on question, assuming I do need the ESR, would be what do I do with it? It appears to serve the purpose of design for interfaces, messages, and mapping, but I thought that happened when I created a proxy in SPROXY.
We're on ECC 6.0, with a 702 / 0007 basis release. I appreciate and light you can shed on the topic.
Thanks

ESR is part of the PI system, and it is where all interfaces details are stored.You could create an ABAP Proxy from a pre-defined WDSL yet stored in PI as part of some communication, but you can also import directly a WSDL from a local file or even from a URL.
ABAP proxy generates a proxy class and a set of abap structures , fields and data elements. Simply by filling the data and call a method in the proxy class (depends of syncrhonization a different method name) you can consume your service. No PI is needed if you use the local option.
There is a very good Tutorial from Thomas Jung. I'll try to find it.
http://scn.sap.com/people/thomas.jung/blog/2005/05/13/calling-webservices-from-abap-via-https
Here you have a lot of tutorials
Best regards

Consuming ES Workplace Web Services in CAF - ReadCustomer Example

Hi,
I am trying out the steps from [Consuming ES Workplace Web Services in CAF|http://help.sap.com/saphelp_nw72/helpdata/en/6d/00932cf834471789ad286986185acb/content.htm]
Completed steps 1 through 5 successfully. For step 6 I am unable to locate the options and I guess I missed something here.
When I am testing the development I get the error Service Mapping is missing.
More Error info: com.sap.caf.rt.connectivity.exception.CAFWSExecException: The Service mapping is missing.
Please let me know if I am missing something here or the configuration I might be missing in step 6.
Environment:
SDN_Preview_SR_5_CE71.rar
SDN_Preview_SR_5_IDECE71.rar
Thanks,

solved.

Consuming an external web service with WAS 6.40

Hi all,
I know this thread isnt 100% XI forum related, my apologies for that. However, I believe somebody here has experience with this subject.
Im trying to consume an external web service through WAS 6.40 with se80. When I try to create my proxy object package Choose Create > Enterprise Service / Web Service > Proxy Object > URL type, I receive an error message (SPRX084) -> During proxy generation, an interface description in WSDL format is fetched from the integration builder or from another source and interpreted. This WSDL document must describe the whole interface correctly.
I dont have sure, but it seams something within WSDL object/element. Nevertheless, these external web services are working well with other third party client applications, why SAP WAS cant take this WSDL?
Anyone has faced an issue like this one?
Thanks in advance,
Ricardo.

Hi,
some tools do not generate WSDLs correcty (not with all the standards
or with obsolete parts) and then in ABAP you cannot generate a proxy from it
you should be able to see the some more details in disgnosis section
sometimes you just have to change one or two things in the WSDL
and it will be ok for WAS but you need to find the exect cause
of the error - it can be done by debugging
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Consume an external Web service within an orchestration

Hi All,
I am following this link in order to consume external wcf web service in BizTalk server.
http://blogs.msdn.com/b/sonuarora/archive/2007/04/14/consume-wcf-service-wizard-generates-port-binding-configuration-files-for-import-into-biztalk-server.aspx
I am following below steps to import binding
Open BizTalk Server 2013 Administration Console
Select a BizTalk Application. Right click, select Import > Bindings.
after this I am getting following error.
===================================
Failed to update binding information. (mscorlib)
===================================
Could not store transport type data for Primary Transport of Send Port 'WcfSendPort_EdiWcfWebService_BasicHttpBinding_IEdiWcfWeb' to config store. Object reference not set to an instance of an object. (Microsoft.BizTalk.ExplorerOM)
For help, click:
http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013&ProdVer=3.10.229.0&EvtSrc=Microsoft.BizTalk.ExplorerOM.Resources&EvtID=IDS_ERR_TRANSPORTINFO_SSO_SETCONFIG
Program Location:
   at Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.SaveChangesWithTransaction(Object transactionObj)
   at Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.SaveChanges()
   at Microsoft.BizTalk.Deployment.Binding.BindingInfo.Update(SqlConnection sqlConnection, BindingParameters bindingParameters, String applicationName)
Environment:
OS:Window server 2012 R2 64 bit
SQL:SQL Server 2012
BizTalkServer: BizTalk Server 2013
Please advice
Txs,
Ramesh singh
Ramesh Kumar

Hi Ramesh ,
Enterprise Single Sign on service is used to store the receive and send port configurations of BizTalk. The error comes usually if your SSO server is not started or the SSO service is not running on the SSO server. Login to the SSO server (it is same where
BTS is installed in a single server environment) and check the service if it is running or not from the services manager. You can type services.msc on the run command to access the services manager console. View the Enterprise Single Sign on status that it
is started or not. If it is stopped start the service.
If you dont find SSO service i think than you need to reconfigure your BizTalk Environment.
Remember the service depends upon SQL Server check that the SQL Server services are running fine or not. Here is a link to explain more about SSO
http://msdn.microsoft.com/en-us/library/aa578564(BTS.20).aspx
Thanks
Abhishek

How to consume the Abap web service in Java web-dynpro

Hi Everyone,
I want to consume ABAP web service in java web dynpro.
so when i tried to create model in java web-dynpro, it gave me an error message saying "Invalid WSDL or WSDL not found".
i think this error message is because, to access the WSDL of abap web-service, we need username and password, but the dialog box in java web-dynpro is not programmed to take username and password from us and send it to the server to get the WSDL.
i came to this conclusion because i was able to successfully test my abap web-service in java portal. the java portal asked me the username and password to open the WSDL.
So, please help me to consume the abap web service in java web-dynpro.
Thanks in advance
Regards
Vikas

Hi Vikas ,
while creating a model in web-dynpro try to use the "import web service model" option and if you are using local server choose the local server option so that you can get the available web services which are in server, select one among them and continue you process.I think this is the some what easy way .
If you want use the URL for wsdl better to once test the available service in server and copy that WSDL URL and paste over WSDL textbox.
I think this is pretty help ful to you
Best Regards
Srikatnh

Timeout when consuming a SOAP web service

Hello,
I'm quite new to Labview and I'm trying to consume a SOAP web service created using a very simple WCF example, but I keep on getting a WebException because of a timeout.
The web service has been created using the example from the WCF getting started tutotial (to keep things simple) http://msdn.microsoft.com/en-us/library/ms734712.aspx
You'll find my .Net solution attached to this message. (You'll have to be administrator to run the service though).
I have used the import web service tool in Labview to create the VI to connect to the web service and all went fine, it created the VI correctly. You'll find the created VI also attached to this message.
Then, I'm trying to create a very simple VI to call the webservice and put the return value inside a numeric indicator. Unfortunately, when I run this VI it crashes with a WebException because of a timeout.
If I run the .Net client, everything goes fine, and if I go to the web service address with a browser, I get the service website, so I know that the server is registered correctly, only Labview can't connect to it for an unknown reason. Everything is setup to connect through localhost:8000, so it can't really be a network problem, I've tried disabling the Windows firewall to see if that was the problem, but it persists.
I've also tried to do something similar using the CDYNE web service, like in the example http://www.ni.com/white-paper/4728/en/, and it works perfectly.
Does anybody have an idea about what could be the issue?
Regards.
Attachments:
WcfTestApp.zip ‏453 KB
_Calculator.zip ‏72 KB

OK, I found the problem myself, it was a problem with the configuration of the WCF service, I was missing the ServiceMetadata endpoint.
For reference, if somebody stumbles upon the same issue as I had, here's a service configuration that works with Labview (using .Net >=4.0)
 <system.serviceModel>
 <behaviors>
 <serviceBehaviors>
 <behavior name="">
 <serviceMetadata httpGetEnabled="true" />
 <serviceDebug includeExceptionDetailInFaults="true" />
 </behavior>
 </serviceBehaviors>
 </behaviors>
 <protocolMapping>
 <add scheme="http" binding="basicHttpBinding" />
 </protocolMapping>
 </system.serviceModel>
And here's how to create and run the service host.
using (ServiceHost selfHost = new ServiceHost(typeof(Calculator), new Uri("http://localhost:8000/Calculator")))
 try
 selfHost.Open();
 Console.ReadLine();
 selfHost.Close();
 catch (CommunicationException e)
 selfHost.Abort();
 throw;

Consuming an External Web Service using HTTPS and WS Security

Hello everyone,
I'm having a problem setting the security information in a SOAP header using a generated ABAP Client Proxy to consume an external web service that requires a User ID and Password in the Header section of the SOAP message. I need to use HTTPS. I'm on a WAS 7.01 SP08 system so from my readings, SAP is supposed to be able to add the username and password into the header section of the message. I can't seem to get SAP to add this information added to the header.
Here are the steps that I have taken to set the security values.
1) Created the client proxy from the WSDL in SE80. Basic Authentication on the Configuration tab was turned on automatically.
Note, Transport Security is set to None. I cannot change it.
2) Created an outbound set user name profile in transaction WSPROFILE with the appropriate username and password.
3) Added the profile to the default port in transaction LPCONFIG as an outbound under the WS Security section of the screen.
When I called the external Web Service, I got back the following error message:
com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC5509E: A security token whose type is [http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken] is required.
So, after reading through this Forum, I saw that I needed to use the SOAMANAGER. I set up a Proxy in the SOAMANAGER and manually created the Logical Port. This was the only way I could figure out how to set the Authentication Settings in the Logical Port to "User ID / Password". I then entered the User ID and Password.
However, I am still getting the same error message. I feel I am close but missing some small configuration to tell SAP to use WS Security with a Username token.
I'm not sure what I'm doing wrong, so any help would be appreciated.
Thanks,
Stephen

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

Help: consuming an external web service with user name token

Hello Together!
I need to consume an external web service secured with WS-UserNameToken. The way, how did I do it:
1. I generated a web service consumer (proxy) in SE80 from the wsdl file
2. I created logical port for the consumer in SOAMANAGER
3. I created security profile in WSSPROFILE with telpmate SET_USERNAME and assigned it to consumer operation in LPCONFIG (I use LPCONFIG, because I didn't find any way to do it in SOAMANAGER)
3. I called the web service and got the error back: session token is missing or invalid or has inspired
My questions are:
1. is this possible to consume an external webservice in SAP, which is secured with WS-Usernametoken?
2. do I need therefore any settings in java stack? do I need java stack in general?
3. Is this any way to configure the consumer without writing programs, which set header parameter manually?
4. if the answer on the third question is no, do you have any examples, how to implement session management in report? (I mean sending session id and checking the validaty of id)
I appriciate any help of you!
best regards Anna

Hi,
it should be possible to use WS-UserNameToken for consuming web service. It should be available on AS BAP 7.0 and higher. This profile should be under category Document authentication. You can try to dump a message send from SAP to see what is going out of SAP. This should be supported in ABAP so you don't need a Java stack. What exactly do you want to configure? Do you want to just set user name and password for that service which will be used for any calls of that proxy?
Cheers

Missing applications for the SharePoint Web Services site in IIS

We have SharePoint 2013 server farm and in one of the server missing service applications/virtual directories.
Under IIS, “SharePoint Web Services" site including an Application Pool and SharePoint Web Services Root is available, but no applications for the SharePoint Service Applications, all applications (security token service, topology ..) virtual directories
are missing/removed/deleted.
Can we re-provision only service applications on local SharePoint server, local server only not in any other servers in the server farm?
Thank You.
-RK

Hi RK,
Please check if services has been started on this server via CA > System Settings
> Manager services on server > change server to the current one.
Is there other application server in your farm? Please test the issue on other servers.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Exception when trying to run an Web Application that uses a Web service

Hello All,
I get an exception when trying to run an Web Application that uses a Web service. The web application is a WebDynpro Application.(an application similar to the one "Using an Email Web Service in Web Dynpro" in the tutorial section of Web Dynpro but using a different web service)
The exception is
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
Could anyone give me an idea on what might be the problem ?
Regards,
Loveline.

Hello,
Like you said it was the problem with url.
The webservice I used is actually running on the local machine (where the NetWeaver developer studio is installed); so in the url I had specified localhost. But I deployed the application on another server(SAP J2EE Engine). That is why it didn't work. On changing the url as required, the application is working fine.
Thanks !
Regards,
Loveline.

Try NineSYNC, Internet Data Synchronization & Mapping Web Service Software

Those who are learning or pros in web service technology, try the software named NineSYNC, an internet data synchronization and mapping web service, which really running at http://www.ninestep.com/services/ninesync/NineSYNC. You can go to the Jence Incorporated (NineSTEP) web site http://www.jence.com or http://www.ninesync.com and load the NineSYNC client. You can also load the trial version of the web service software.
NineSYNC is a real web service and its big. And it does what its supposed to do. I have tried synchronizing data from Mysql to Sql Server and it was so quick with NineSYNC. I also synchronize files with NineSYNC on a daily basis. All you have to do is set the software up and it will synchronize periodically.
Nice cool way to do things and the future of web services technology.
Burd.

Burd, It's a nice program. I haven't found anything like this before and it works quite good. Thanks for sharing the informaiton. I would suggest anybody to take a look at this SW who are involved in data synchronization and mapping process.

Consume abap based web Service in Visual composer 7.0

Hi All,
Can any one provide me sample example or PDF on "consume abap based web Service in Visual 7.0 composer" not WSDL based
Help will be appricated by awarding point.
Thanks

Hi,
Try the below link.
Consuming WebService in Visual Composer-1
Hope it helps...
Regards
Basheer

Consuming 3rd party web service in Java web dynpro application

Hi All,
I am working on a scenario where external(3rd party) web service has to be consumed in WD Java application. I am provided with WSDL file. Let me explain how I usually consume other webservices:
     Create model->AWS model->Remote Location/file System->provide url->create/choose service group->finish
     Then I would generate the code in custom controller by applying template
      I assign provider system as local for the service group in nwa.
This is normal process to me. I am struck with this 3rd party web service. Please share your ideas on the same. Any help is highly appreciated.
BR,
Manoj

I ve created a provider system pointing to where 3rd party WS resides. i am trying to connect through WSIL. While pinging that provider system, I don't see that particular WS(that I am gonna consume). And while assigning this Provider system to service group, processing state getting 'Failed'.
What could be reason?

Zoom level in WPF Application consuming Bing Maps Web Services

Similar Messages

Maybe you are looking for