Zoom level not works on horizontal orientation

Hi, i've this issue : when i set crystalReporViewer.zoom(2) on a report with horizontal orientation, zoom not works. If i set vertically orientation, my zoom level is applied.
Thanks !

Hi Paulo,
It's not clear in the steps you are using. Are you setting the zoom level first before previewing or setting the zoom after previewing?
First post you said you were setting zoom to level 2, now you say you are setting zoom to level 300????
And Horizontal is Landscape and vertical is Portrait correct?
If you set the Zoom to 300 % you will have to scroll across, horizontal bar should be enabled.
If I set it to 1 then it fits the width:
This is a landscape report.
Don

Similar Messages

Zoom gesture not working??

Hello, the pinch/zoom is not working when using safari? I tried it in iphoto and it worked there. i am using mac os x lion, all other gestures appear to b

Right, if you don't have the buttonless trackpad you can't use all the gestures in Lion. With MacBooks it's only the Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody that have the buttonless multi-touch glass trackpad. The Early and Mid 2009 model 5,2s had the 2 button trackpads
Check out http://support.apple.com/kb/HT3448

Y min value not working in horizontal Flash Bar Charts

Hello All,
Going crazy trying to work this one out.
I have a problem with a Flash Chart (APEX version 3.0.1.00.07)
The data mainly begins at 97 and goes to no more than 100, therefore I want the min to start at 96 so the results don't look to similiar. Why when I imput my minimum value, it does not work for Horizontal Flash charts ?
It seems to work for stack or vertical charts, can something be done via the "custom XML" ?
Link below use deatils as follows
User Name = [email protected]
Password = helpme
http://apex.oracle.com/pls/otn/f?p=35407:3:550931101789266:::::
select option "Same day"

Hi Deb,
Both of your queries are using multi-series syntax i.e. returning more than one series of data, therefore your generated chart is actually generating 6 series rather than just the two that you're aiming for. You could try changing your queries to ensure they each generate a single series of information, which would then result in the extra Y-axis being applied to your "Series 2". Here's an example of what I mean:
Series 1:
select null link, label, value from (
select 'test' label, 1 value from dual
union all
select 'test2' label, 2 value from dual
union all
select 'test3' label, 3 value from dual
)Series 2:
select null link, label, value from (
select 'test' label, 100 value from dual
union all
select 'test2' label, 200 value from dual
union all
select 'test3' label, 300 value from dual
)I hope this helps.
Regards,
Hilary

Pinch & zoom gestures not working in Safari

Help! Since updating iPhone 4 to iOs 5.1, "pinch & zoom" gestures do not zoom in on page in Safari. Can anyone help with this?

On Lion 10.7.2, iMac, pinch to zoom does not work at all in any application. It is selected in Preferences. Apple Genius & tech on the phone could offer nothing, no reason why, & no fix . Better Touch Tool does not offer a pinch to zoom, so that didn't help.
Among my friends, some say it works, some say it does not, about half & half.
APPLE! Please give us a fix for this!

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before...

Adjusting Levels not working, please help. Photoshop CS3

Anyone have an answer for me? Tech support NOT helpful unless I dish out even more money! Using Photoshop CS3. I am trying to adjust the levels on a very simple bitonal scan from PDF. When I adjust them by going to, Image, adjustments, levels, the preview of it works and it shows what I want, but when I hit OK, it dissapears. If I go to Layers, New Adjustment Layer, Levels, it shows up fine until I save it.. I am trying to save it as a PDF file, and I am saving it with Adobe 6 (1.5) because of compatibility issues (so I've read), it should save layers. But its not saving. Or maybe it's not opening in my Adobe Acrobat? is there an update I need or something? Is there a step I am missing? is anyone else having this problem? Even so, the Level adjust should work regularly while in PS CS3.
THANK YOU!!

make sure you're viewing the preview at 100% zoom. any other zoom level isn't going to give you a true representation of the adjustment you're making...

Make table of contents links keep current zoom level, not zoom out to full page

When Indesign creates tables of contents, they automatically link to the paragraphs the links point to, so that in an interactive PDF, clicks and prods take the user to that page. Great.
What's not so great is, that the hyperlinks / cross-references / jump-links / whatever that are created behind the scenes within the table of contents appear to:
...be automatically set to reset the zoom to full page width
...not be editable in any way
Normal cross references retain the zoom level that the user has chosen, and normal hyperlinks that point to a page in the document have a range of settings about what zoom level change (if any) should be imposed on the user, which can be set to 'inherit zoom'.
How do I set up a table of contents that doesn't annoy users by resetting their chosen zoom level to an artitrary default when they use the interactive table of contents?
I'm really hoping I don't have to ditch Indesign's table of contents feature and create every cross reference manually.

(editted) So it turns out that you can 'expand' a table of contents by copying and pasting it - this fills the hyperlinks panel with links that can be editted (like above) but breaks the auto-update - they're no longer a TOC, they're just a text frame full of links. (I had got different copies mixed up when I thought the frame holding the editable links was also auto-updating)
The greying out of the links was a red herring, just something to do with the fact they were on a master page.
It does mean that one possible TOC workflow is:
Create a TOC on the pasteboard somewhere.
Before finalising the document, update this TOC and alt-drag the 'live' TOC creating an editable 'dead' copy in an appropriate place in the document
Edit the link properties of the links in the 'dead' copy (don't forget that you can select multiple hyperlinks at once by holding down shift, and edit things like the Zoom Setting all at once with Hyperlink Options in the Hyperlinks flyout menu. )
Then, if you make other changes to the document later on, delete the dead copy, update and re-copy the live original, and re-do the changes to the new copy
This isn't a bad method - it just adds about a minute's work each time you export a PDF (delete, update TOC, alt-drag, shift-select the new batch of .XXXX links at the bottom of the Hyperlinks panel, > Hyperlink Options, Zoom Setting > Inherit Zoom, done).
Alternatively, you could manually build a TOC using cross-references if you want links to the exact position on the page, not just the top of the appropriate page.

Active State not working in Horizontal Menu Bar

I have a Horizontal Menu Bar.
I've set the Top Level Item with Normal, Rollover, Mouse Down and Active States to be different.
All three work on the Top Level Item, EXCEPT for Active State. When the menu is Active, and I move the mouse down the items, the Top Level Item defualts to the Normal State, NOT the Active State.
I've tried trashing the Active State and rebuilding it. That did not work.
I can't figure out how to get the Top Level Item in the Menu Bar to display the Active State.
Hope someone has some suggestions, or knows if this is a bug.
Thanks.
Dave Coop.

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Pinch open and close zoom (mac) not working in latest beta update

Anybody know why pinch open close for the mac track pad suddenly does not zoom in the lastest beta update?

I am typing out easy instructions for those that are new to entering values. I myself am no expert for sure. It took me awhile to figure it out and I got it to work. I was mad when the pinch to zoom didn’t work after I updated. Thank you '''cor-el''' for posting a fix.
1. Go to a new tab, type in ''about:config'' hit enter
2. Click the “I’ll be careful, I promise!” button
3. Scroll down until you see “browser.gesture.pinch.in” right click on it and hit modify
4. A drop down that says “Enter string value” appears type in ''cmd_fullZoomReduce''
5. Click ok
Find the other ones and do the same. After you have entered all four you should see them in bold and on the right under value you should see only this cmd_fullZoomReduce part.
6.Once you have it all entered just close the tab and it should work.
I didn’t have to quit Firefox for it to work, but you may.
I’m using a MacBook Pro and it worked great, Hope this helps.
Preference Name / Value
browser.gesture.pinch.in / cmd_fullZoomReduce
browser.gesture.pinch.in.shift / cmd_fullZoomReset
browser.gesture.pinch.out / cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift / cmd_fullZoomReset

My video zoom does not work on my iphone or ipad after IOS 7.0.2 update.

After updating iPad and iPhone 4S to IOS7.0.2 the video zoom function does not work. I have also lost the function to zoom on video playback.

Is somebody from Apple monitoring these forums? I do have the same problem, i just recently noticed that the zoom in my video camera is no longer available since I upgraded my 4S iPhone to the newest version.

Alt scroll to zoom does not work in Acrobat anymore, why?

I used this feature all the time before but it does not work anymore. Why?
I have Mac OSX 10.10 Yosemite and use a Logitech mouse. Lates versions of all CC-apps.

Still having this issue after an update...
I review a lot of architectural drawings, which requires a lot zooming in/out to see details... Up until this last Acrobat Pro (11) update I was able to press option (Mac) and use the scroll wheel to zoom in and out... That convenient feature is now missing... I jacked around with several preferences and Page Display settings with no luck... I am hoping there is a checkbox hidden somewhere that I need to click on... Any clues????
Thanks...

Enforcing attachment to process level not working

I am trying to attach attachments (doc, pdf etc) at process level from task form but it goes to task level some how. I was able to verify that by looking into WFATTACHMENT table.
UI side
<af:selectOneRadio value="#{bindings.attachmentScope.inputValue}"
label="#{resources.UPLOAD_TO_PROCESS}"
id="uploadToProcAttach"
I am making sure attachmentscope is going as 'BPM' not 'TASK' by binding to my own managed bean and set scope to process level.
This is working because if I do URL instead of desktop file then URL attaches to process level. I verified this too by looking into WFATTACHMENT table.
So not sure why
addAttachmentBean.uploadFile no matter what attaches pdf, doc etc attachment to task level and also notices that WFATTACHMENT table has row for this record with taskID as something like f76a60ad-53f2-40dc-ac75-af53d64854e4 instead of taskID as process instance Id like 4000001.
I am using Oracle BPM 11.1.1.6.0 PS5.
Attaching URL to process level from a task is working but from the same task attaching real doucment to process level goes to task level.
I am not using UCM.
I really appreciate any inside.

Finally, I was able to solve this issue.
Project was migrated from Oracle BPM PS4 to Oracle BPM PS5 so some how human tasks created in earlier version were not working in new version for new functionalities (adding attachment to process level). When I deleted these human tasks and recreated in newer version. Everything started working great.
I am not sure it is Oracle bug issue or what....

Privledge level not working

Guys and Gals,
I need to allow a level 9 user in my switches the ability to manage interfaces f0/1 to f0/44 but NOT
interfaces f0/45 thru interface f0/48 (these are trunks). Any Idea why this does not work...
privilege interface level 8 switchport port-security max
privilege interface level 8 switchport port-security mac stick
privilege configure level 15 interface f0/45
privilege configure level 8 interface f0/8
privilege exec level 8 config t
privilege exec level 6 show interface
privilege exec level 6 show run
thanks !

We are doing similiar but I believe you do not have the ability to go more granular then the interface.
privilege configure level 8 interface
Provides access to all interfaces but the command doesn't seem to be able to differentiate past that point. Might be able to do it using a TACACs server though.

Zoom keys not working on ibook g4, stuck on full zoom...

I was trying the zoom feature on my ibook g4, 10.4.6, and turned on zoom. I zoomed in but now can't zoom out or turn off the feature, as I am fully zoomed in. A reboot did not fix this. Upon login, I see my regular desktop for a few seconds, but can't get system preferences open in time to turn off the zoom. A box opens up called character palette and then my desktop zooms fully in. The keyboard shortcut won't work... When I first turned the feature on, I noticed the zoom in shortcut worked fine, but the rest would not. I use quicksilver and can get to my terminal "blind". Is there a terminal command to turn off the zoom feature? My user account is completely useless until I can zoom out...I will try to create another user to see if I can recreate the problem, but in the meantime... I have tried a test account and can recreate the problem. option apple 8 does not work to turn on/off zoom and option apple - doesn't work as well. Only option apple + works. I can't get into system preferences graphically once fully zoomed in as I can't see anything.

Hello again!
I'm sorry you're still having the problem. If you have a look back at my previous suggestion, you'll see that I didn't say "do an archive and install"! That will only help if the OS is corrupt.
I don't entirely understand the symptoms you're getting, but I do suspect a corrupt preference file (.plist) which is why I suggested zapping them both and nothing else. Archive and instal preserves .plist files, ensuring that if the problem is indeed related to them, it will not be cured.
However, you've now eliminated the possibility that the OS is corrupt!
So, could I suggest the following steps, since you now have a functioning user account?
0) Check that the keys are indeed giving you the characters you expect (normally =, - and 8).
1) Open the System Preferences—>Universal Access pane and check the keystrokes designated for Zoom.
2) Try the keystroke specified for Zoom on/off (default is cmd-alt-8), and see if the On and Off radio buttons toggle as you do so.
3) Go to the System Preferences—>Keyboard & Mouse pane and ensure that the checkboxes for "Turn zoom on or off", "Zoom out" and "Zoom in" are all ticked.
4) Try a single keypress of cmd-alt-= and see if the screen zooms in by a step. If all you get is an alert sound, press cmd-alt-8 and try again.
5) Try a keypress of cmd-alt-- (minus) and see if it zooms out again. If it doesn't, use the Zoom on/off keystroke to turn it off again.
6) If the problem still persists, then either quit System Preferences and use Terminal, or do what I suggested in my previous post, but zap those two .plist files. You'll have to reset other values, but at least it should rescue your system.
Keep us posted!
Archie
iBook G4 12" 1.2 GHz, G4 Sawtooth 400 MHz, PowerBook G4 17" 1.67 GHz Mac OS X (10.4.5)

Why is zoom widget not working across all browsers? How get answer?

We placed the jquery zoom widget on the following page: http://www.hoohobbers.com/baby_crib_bedding_ahoy!zoom.html
It works as advertised in IE and FF. It doesn't do a thing in Opera, and in Safari it loads in a different position than that specified in code, and is 'stuck' in only being able to zoom the top layer of images; the zoom will not move freely around the entire image.
Does anyone know what the problem is?
Also, does anyone know of other 'forums' where an answer might be sought? After our initial posting -and responses- as to how to get the widget to work in the first place, we posted this latest problem over 24 hours ago but not received a reply.
Thanks in advance for any help or direction.

OK this is not a server-side issue.
Again, it's browser-based. Your code needs to be:
<embed src="[filename].mp3" type="application/x-mplayer2" autostart="false" playcount="true" loop="false">
This will make Internet Exploder use Windows Media Player to play back the .mp3 file
The type attribute overrides the actual file extension and MIME type of the file to be played.Unfortunately, IE ignores MIME Types and file extensions - instead it examines the contents of the file and decides for itself what format it is and what to do with it. IE will use WMP to play a media file unless another browser plugin lists it.

Zoom level not works on horizontal orientation

Similar Messages

Maybe you are looking for