Zoom problems with G30

When I zoom out with the rocker switch on my G30, the zoom will return to a wide angle, especially if I lightly touch the telephoto end of the rocker. It will continue to return to wide angle by itself, even if I move the rocker switch to telephoto. This seems to occur when the weather is hot (we shoot outside much of the time) and the camera has been operating for an extended period. This zoom problem does not seem to happen if the touch screen and remote zoom are used and the camera is cool. I bought this camera 9/2013. Has anyone else experienced this issue? Could this be a defective zoom switch? Would updated firmware make any difference? Any help would be appreciated.

Hi mimages!
Thank you for posting.
Based on your description, the camcorder will need to be examined by a technician at our Factory Service Center. To start this process, you'll need to complete a Repair Request on our website.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Psychedelic Zoom - Problems with new iPad (3rd gen) display

Is anyone else seeing trails on the iPad transition zooms? I am guessing that it is a probelm with the display chip on my ipad.
Go here to see a video of the effect.

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Alt + Scroll for zoom problem with Photoshop CS3

Running Adobe Photoshop CS3
Windows XP Pro Version 2002 Service Pack 3
When I check the "Zoom with Scroll Wheel" box in Preferences > General:
-using zoom tool, scroll wheel will zoom out to the smallest size, but will only zoom in until image is slightly larger than the file window then slides the image left and right or up and down depending on size of file window. When image is slightly larger than the file window, zoom out doesn't work anymore
-using Alt + Scroll does nothing
-Ctrl + Scroll zooms image the way Alt + Scroll should
When I UNcheck the "Zoom with Scroll Wheel" box in Preferences > General:
-using Alt + Scroll scroll wheel will zoom out to the smallest size, but will only zoom in until image is slightly larger than the file window then will neither zoom in or out anymore
-using Ctrl + Scroll slides the image left and right
In either preference setting, using ALT key causes letters for menus in the tool bar to be underlined

anybody?

I am have problems with firefox 5& 6. It does not display correctly. I have tried the no squint and the internal zoom. Some pages load ok, others like yahoomail, load tiny unless I zoom and then other pages have problems. Why? What else can I be doing?

I am frustrated. With the no squint, which has a mind of its own, then some pages are fine, in others the type is too big or too small for the frames. If I use the default Firefox zoom that is no better. I have to set things for like 130 percent and am constantly having to click on the zoom and change things. I never had that with previous versions? Why can't Firefox just go back to displaying text in the correct frames at a decent size?

I have played with all the options in no squint and the default zoom thing. My email list in yahoo remains tiny tiny, other things do not. If I enlarge that, then other things are too big. I never had this problem with older versions of firefox. I never had used any zoom features, it all sized itself correctly.
To troubleshoot, I tried to open the same things with chrome, and it had much less of a problem sizing the type etc.
I am kind of at my wits end here.

Problem with zoom in Photoshop CS6

Hello
I've got problem with new(?) feature in Photoshop CS6.
When I'm working on my project and have for example 150% zoom and I want to move workspace with SPACE+LMB.
In my previous version (CS3) I can do this without problem but know Photoshop shows me my file with FIT TO SCREEN zoom and some frame to choose
which screen area I want to zoom in.
It's just zooming out to full view of file. I hate this, but I can't turn it off.
My system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 3828 MB
Free memory: 148 MB
Memory available to Photoshop: 3250 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 420M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2189
Driver Date: 20100728000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: %NVIDIA_DEV.0DF1.01%
OpenCL Unavailable
Driver Version: 8.17.13.553
Driver Date: 20120802000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: %NVIDIA_DEV.0DF1.01%
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 90970819015185381107
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\VDS\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111,7G, 14,6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Efex Pro 4 NO VERSION
   Color Efex Pro 4 NO VERSION
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   Camera Raw 7.1
   Nik Selective Tool 2.1.3.17256
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

I was just being sarcastic. I knew it is a feature while searching for a way to fix the issue awhile back. I am very interested in knowing if any user out there could somehow fix the problem by reseting, reinstalling, etc. I got an update a few hours ago, and that didnt fix it either.
I have tried a lot of suggestions, and the only one seems to be working for me is to turn on "Scrubby Zoom"
Noel,
I run Adobe CS5 on MBP 10.6 and CS6 on MBPr 10.8. No additional plugins, English US keyboard. The laptops come with standard configuration... nonetheless, they both have the same issue.
I am sure my computers have different settings from others, but this issue does not seem to be isolate as there are other users have experience it too.
I personally, don't think it is too hard to re-create. Most likely happen when
1. Hold down space+command to zoom in
2. Release keys, then hold down space and start moving around
3. there you go, "bird's eye view" comes
One thing I notice is that the problem does not occur all the time.
-B

I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
iPad, iOS 7.0.4

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Problem with Zoom in CS5

Hi, I've been having a problem with the zoom in CS5. I've looked around the web for a solution but no luck.
Basically when I zoom out the image becomes pixelated unless its at 50% zoom. The same image with the exact same zoom will look absolutely fine in CS4.
Example:
http://img691.imageshack.us/img691/3761/46991735.jpg

People sometimes report that the OpenGL based zoom in Photoshop CS5 makes their images seem soft. Your observation seems to be the opposite.
It sounds as if you're not actually getting font rendering in OpenGL, and maybe you need to update your video drivers (or maybe your video card just won't do that function).
Are you seeing the same behavior if you change the Advanced settings for OpenGL in Edit - Preferences - Performance? FYI, I just tried it and I see the same jaggies on huge fonts reduced to 66.67% with OpenGL off, which is to be expected.
However, with OpenGL on, I see this:
-Noel

Problems zooming out with a Flash Banner

I have created a Flash banner for the home page of my website. Here is the link to the page I am working on: http://adirondackvic.org/CSSTest9July2012-2.html
When I zoom in to increase the size of the web page, the Flash banner rescales automatically. However, when I zoom out, to decrease the size of the web page, the Flash banner does not automatically rescale. It remains the same size and you have to hit the refresh button to get it to rescale to fit the newly resized page.
Is there a fix for this? I searched the forum and the web and have not found an answer. I put a question on this in another forum, but received no responses. I found some discussions of the issue on the web and on this forum, but I was not able to figure out how to incorporate the suggestions into my page. I tried changing the scale from exactfit to showall, as recommended, but that created a problem with the appearance of the page. (The banner no longer fit properly into the header window.) I also tried (as recommended by one of the entries in this forum) to change width="100%" height="100%" or width="100%" height="auto". This fixed the problem for Internet Explorer, but then the entire banner disappeared in Firefox.
Please help! I am at my wit's end.... Thank you. ellen
Here is the relevant code:
<div class="header">
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="960" height="100" align="absmiddle" id="FlashID" title="FlashBanner">
      <param name="movie" value="BannerTest16.swf">
      <param name="quality" value="high">
      <param name="wmode" value="opaque">
      <param name="swfversion" value="6.0.65.0">
      
      <param name="expressinstall" value="../Scripts/expressInstall.swf">
      <param name="LOOP" value="false">
      <param name="SCALE" value="exactfit">
      
      
      <object data="BannerTest16.swf" type="application/x-shockwave-flash" width="960" height="100" align="absmiddle">
        
        <param name="quality" value="high">
        <param name="wmode" value="opaque">
        <param name="swfversion" value="6.0.65.0">
        <param name="expressinstall" value="../Scripts/expressInstall.swf">
        <param name="LOOP" value="false">
        <param name="SCALE" value="exactfit">
              
              <div>
      <img src="Images/Banner102 -- Saint Regis Mountain from the Barnum Brook Trail -- June 2012-1.jpg" width="960" height="102" alt="Paul Smith's College VIC" align="absmiddle">
              </div>
        
      </object>
      
    </object>
</div>

Kevinsoffice wrote:
iDevices are pretty much dead hardware since they dont support popular flash. How many mac forums are filled with people complaining about Apples choice not to support it. And with much better hardware coming out like the Samsung line there are better choices then iStuff.
The evidence does not support that position.
As expected, Adobe has stopped developing Flash on mobile devices (iOS and Android)
http://www.businessinsider.com/adobe-to-kill-mobile-flash-starting-august-15-2012-6
http://www.digitaltrends.com/mobile/adobe-flash-for-android-gone-with-barely-a-whimper/
Flash is dying, iStuff is alive and well.

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

Is anyone else having problems with zoom in ios 8?

I just installed ios 8 on my iPhone 5, and honestly, I am not thrilled with the
results. I am visually impaired and rely heavily on the zoom feature. The
reaction time to the three-finger tap in ios 8 now seems sluggish, swiping
around to move the view feels like pulling my fingers through mud, and the
image doesn’t move as smoothly as before. Previously, I could swipe with three fingers
to move my view, and after I lifted my fingers, it would glide smoothly, coming
to a gentle stop after a moment, in a similar way as swiping to scroll works in
contact lists and long messages. This meant I could read something while it
moved, without my fingers in the way.
Now the image moves much more quickly and then comes to a sudden halt
after a second, as if it hit a wall. I have to keep putting my fingers down,
almost clawing at my screen to move it around. It is extremely frustrating.
Honestly, it now feels like the zoom feature in recent Android phones. It’s a
very subtle difference, and it/s a little better when “ follow focus” is off.

I have problems with many of the same issues you mention with zoom on iOS8. Its not entirely clear if this is intended functionality or a number of bugs. The setting for full screen view versus window/regional view seems to not apply globally, which is insanely frustrating. Window view pops up without warning, particularly in a keyboard pop-up event.
I don't particularly liek the popup menu either, but now I HAVE to use it to constantly change from the sudden change to window focus to full screen zoom.
Some of the new filter features are nice additions, but don't seem to work well. or be performance optimized. Low-light, for example, stutters on zooming.
I would also assert that zooming in and out seems more abrubpt and less accurate.
iOS8 is definitely a decrease in usability and performance from its predecessors. Apple, please work out the bugs and get this right!

Virus or technical problem with Qosmio G30?

My notebook is Qosmio G30-149. When I turm in ON, I see that screen is not 100% black, but it has some small white unclear dots. When Windows logo coming up, the whole screen has 10 white vertical lines (each line made with with something similar to the sign !), then compute get frozen and screeb becomes dark. Id I run Windows in SAFE mode, then it is OK. What is it: Virus or technical problem? My Norman antivirus software does not report any problems with viruses. Please help!!!

Hi,
that sound rather then a technical problem than a virus. A virus is operating more on a operating system level and not before.
After rading your description I would suggest you to bring your machine immediately to a authorized service partner because I assume a serious hardware malfunction.
If you really can see some unclear dots from the startup of the machine till windows with lines appearing after a while then maybe something with your graphics subsystem is not OK.
Grab this link and find a authorized service partner in your country to let do a hardware checkup on your machine:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck buddy.
Greets

Problem with OS X, Cursor, Zoom, Dictionary Issues

Hi All,
I'm wondering if someone can provide some guidance to problems I've recently been having with my Mac Book Pro laptop. Starting about a week ago, my cursor on the screen seemed to grow a mind of it's own and all of a sudden started acting strangely. When I'd go to scroll down a screen it wouldn't respond at first and then it would respond but not go anywhere in the direction I was moving it. Simultaneously, the screen would zoom in and out and become unresponsive and then whatever text was in the range of the cursor would randomly hightlight in yellow and a dictonary definition of the word would pop up.
If anyone has any experience with problems such as these, can you please let me know. I'm having these issues frequently enough to make the computer really unusable. I'm not sure if this is a problem with my computer itself or some software glitch. I've never had problems with this MacBook Pro before, and it is very new, purchased just like 18 months ago.

Portables and Magic Trackpad: Jumpy or erratic trackpad operation

Pages - Does anyone else have this problem with zoom?

Hello,
please does someone have the same problem with page for iOS? here is a link to a picture which describes my problem : https://www.dropbox.com/s/mpecfcbgorrzjes/Photo%2029-10-2014%2019%2012%2016.png? dl=0
Thank you very much.

someone help meee!!!

The Problems With Logic (as I see them) - PART TWO!

Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com

11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work.

The problems with Logic (as I see them)

Hello Everyone,
Please keep in mind that I am writing this with the intention of expressing my frustrations, and what I feel would make Logic a better program. I realize not everyone will agree with the importance of what I say, but I am a firm believer of HAVING THE OPTIONS. Let the users choose what works for them and how they can best accomplish the tasks that they need to with their individual workflow.
That being said, here is my list of Logic's faults and why I often call Logic "Illogic".
General:
* Logic should have a feature to automatically save your song every X number of minutes. Final Cut Pro does this, why doesn't Logic? It should prompt you "Logic can automatically save your project if you save it" (assuming the current file is 'autoload') to remind users that they should create a project name and save their work.
* There should be a preference option for all windows to open as 'float'. Once upon a time holding option while double clicking parts would open them as a float (though having to hold down option every time in my opinion is an inconvenience, because I personally ALWAYS want my windows open as a float), however.. now in 7.2 that does not seem to work anymore. So, theoretically after you set your prefence to 'always float', then the when you hold option or control and click on a particular window, it will bring that window to the foreground...
* The loop region at the top of the screen is larger than the time-line ruler tab. This is the #1 annoying thing about logic. so many times, I click on an area of the ruler tab to start playing at a specific section.. and somehow I ACCIDENTALLY click on the loop area... If I could ask for ANYTHING it would be that there is an option to disable LOOPING turning on and off from clicking up there. My 2nd request would be that the ruler tab be re-sizeable so that it can be larger than the loop area. This is especially the case for the matrix window where it default opens up to a sizing where the actual time line is so tiny, and the loop region is HUGE.... Every time I open a matrix window I have to resize this and again the loop area is 2x as big as the timeline area, so I end up wasting screen space just to avoid the annoying loop feature being trued on. My suggestion is, require that the loop button on the transport be the only way to turn on the loop feature (other than key commands), and only when it's turned on can loop points to be set. Why is the loop area so big anyway?!?!
* Logic should offer a TALK BACK MIC button which will utilize the built-in apple microphone or iSight microphone and allow that to be sent to the audio interface. This would be an extremely useful feature for studio recording setups.
* Starting logic takes approximately 5 minutes for me. It says "scanning exs24 instruments" for the majority of the time, and I admit my sample library is huge. however, my sample library has not changed in over a year. Why does logic have to continuously scan it??? Can it not make a reference of how many files, compare and if its larger-- then scan???
Song Loading:
* When audio files are not found during loading a song, it asks you the first time what you want to do "search", "manual", and "skip"... if you click "skip", and then it finds another missing file, it no longer presents you with the "SKIP" option.. but forces you to either search or skip all.. Let's say you have a project that used 5 audio files that are all missing because you had them on a different hard drive, but have copied the data somewhere else. The first two files it asks for you don't need.. but you know where the 3rd file is.. So your plan is to skip the first two files and then click manually for the 3rd.. but oh.. YOU CAN'T DO THAT! You have to find your first 2 files if you want to even have the option to locate your 3rd file... Unless you are planning to locate the files within the audio window-- but still, Logic should not be so unfriendly.
Further, If you choose "manual", and what you're looking for isn't where you thought it was-- You realize you actually want to search for it.. So you click cancel and guess what.. It assumes you want to skip it, and so you either have to reload your project again, or deal with this in the audio window. Bottom line is this window should always have "Search", "Manual", "Skip", and "Skip All".
* When you open another project, Logic DUMPS all of the audio instrument data in memory. This is one of the worst things about logic. If you are working between multiple files-- such as when scoring a film, and you are using different files for different cues, then this becomes a complete nightmare and a waste of your time. Logic should be assessing "What instruments are in common between these two projects"... And utilizing all audio instruments to the best of the machine's memory capacity. There is no reason for Logic to behave like this.. I've had to revert back to previous versions of the same song because some data was different, and I am just trying to visually compare various settings one from the other.. Just clicking from one project's window to the other requires me to have to wait 3-4 minutes while Logic loads all these audio instruments (WHICH ARE IDENTICAL IN BOTH PROJECTS BY THE WAY!!!).. This is just incredibly dumb, and creatively stifling.
* BUG * -- Mind you, if you have two projects open, and you close one.. Logic begins loading all the audio instruments of the remaining project.. If you close that project as it's loading audio instruments, Logic will crash.
Matrix Stuff:
* BUG * If you have a part with lots of notes, and you begin to make a selection and scroll horizontally through all the content until then entire part is covered in the selection... After you release the mouse button and make this selection, quite often many random notes are unselected. This can be demonstrated by watching the following quicktime move:
http://www.collinatorstudios.com/video/logicbug.mov
* When you select a single note in the matrix window, it sounds.. This is a GREAT feature... However, when you make a selection of multiple of notes, they all sound at the same time.. This is just plain dumb. It once blew up my speakers... There is NO reason why a multiple selection would need to sound.. It's just dumb.. bad for your speakers, bad for your ears. The rule should be, if selection box = yes, then sound = no... else, sound = yes.
* When viewing the matrix window while recording, all note events disappear until after recording stops. This is highly annoying (and illogical) as it causes confusion if you are relying on watching the note events in that part to know where you are supposed to come in.
* The grid cannot be set to divisions other than 2 or 3. Musicians use 5 and 7!!! And also, can logic please offer an option to display the grid as NOTE symbols... It is much more musician friendly to see a 16th note with a 3 over it than "24". 24 means nothing to me as a musician.
* Quantizing should allow custom input for tuplets.. So that users can quantize odd figures such as 13:4 for example.
* If you move the song locator to a specific time location in the arrange window, and then double click a part to open it in the matrix window, the window is not opened to the locator's position. Thus causing annoyance and confusion as far as what the user is even looking at.
* During horizontal scrolling of the window, the locator temporarily disappears, making it difficult to find where the locator is-- which usually is a marker for us to know what we are trying to find-- ESPECIALLY WHEN YOU OPEN A WINDOW AND IT'S NOT EVEN DISPLAYING THE SONG LOCATOR'S POSITION!!!
* If you have two parts on the same arrange track, adjacent to each other and you enter the matrix window of the first part.. (assuming the link/chain icon is lit) When you scroll to the end of the note data, logic automatically takes you to the next part... The problem with this as it is, is that it does not take you to the FIRST note event of the text part, but rather continues to align the song locater with where ever it previously was (so you end up viewing somewhere further down in the next part).. To clarify, say you have a part what begins at MM-7 and ends at MM-14, the 2nd part begins at MM-15 and ends at MM-22.. If you begin scrolling the song locator past measure 15, then suddenly you see measure 22. When you really should be seeing measure 15. This is confusing and weird.
* Every time you enter the matrix window of a part, the chain/link button is on. For me, this is incredibly annoying. There should be a way to set this so that the button's default is OFF...
* When you move the mouse around the matrix window, whatever pitch corresponds to the vertical location of the mouse--- that particular key of the piano keyboard on the left side of the window should highlight so you could clearly see what note you are hovering over.. Logic tries to help with this by offering things like contrast options for C D E, but this clearly would be much more helpful.
* With the velocity tool you can (MOST OFTEN ON ACCIDENT) double click on empty space in the window and cause all note events in all parts to appear on the screen-- Yet once you do this, you can't double click on a particular part's note to only display that part again. You have to switch to the arrow tool to do this. This is inconsistent and ILLOGICAL...
ON A SIDE NOTE: PLEASE ENABLE A FUNCTION TO DISABLE THIS "ALL NOTES OF ALL PARTS APPEAR" when double clicking on empty space feature! I want NOTHING to happen when I double click within the matrix window... Make it a button within the window or just an option in the drop down menu only. * BY THE WAY * When you DO double click the background of the matrix window and multiple parts appear.. If you move notes of one part to match it up with other, it is incredibly slow. there is a 1-2 second pause each time you move a note move.. My g5 fan goes on each time I do this.. I'm sorry, there shouldn't be anything too CPU intensive to accomplish this simple task!!! I am only viewing 2 parts at the same time and it's slowing down my cpu...
* Occasionally when I adjust note lengths, I accidentally double click on an actual note.. This opens the event list editor, and there is an intermittent bug where this note sounds-- and for some reason when the event list opens, the note sounds on top of itself a million times, so the result is a super loud flanged note which again, almost blows up my speakers and hurts my ears... PERSONALLY, I would like an option that DISABLES the note event list from opening by double clicking. Preferences currently has "double clicking a midi region opens: <selectable>"--- why not also have "double clicking a NOTE in matrix window does: <selectable>"-- and please allow "DO NOTHING" to be one of the options.
* Why does the finger tool only change the end position of the note event??? Should this not be replaced with the bracket tool which appears automatically when using the arrow tool on closely zoomed in notes? This finger tool seems like an outdated old logic feature which has been replaced and improved upon. What would be nice is to have this bracket tool where we can be assured we are altering note start and end positions without moving things.
* In the hyper-draw >> note velocity section--- This is highly annoying to work with... It's far from user friendly. first of all, to move a note's velocity position, you have to click on the "ball".. if you click on the line, it does nothing.. Because the ball is so small to begin with, quite often the user is going to miss the ball and somehow begin to "START LINE"-- Which is weird because it's activated by holding the mouse button down briefly. There really should be a "line tool" for this, because "START LINE" is too easily accidentally activated-- this is frustrating for the user. Most important though, these 'velocity markings' should be adjustable by clicking on the line as well-- not just the ball.. there should be a 2-3% area around each ball/line which logic will recognize as part of the ball/line so that it can easily be moved. I also feel that there should be some specific features for this section, such as a way to select multiple note velocities and apply a random pattern to them, or apply a logarithmic curve to the line tool. Yes, you can accomplish this stuff somewhat with the transform tool-- but this way would be more user friendly, and allow a lot more creative flow.
Event list/Tempo list:
* When one event is selected, by moving down X number, holding shift+clicking SHOULD select all events between those two points. However, the shift key for some reason acts as the OPTION key does in the finder-- (meaning it will only add one additional selection at a time).. This is highly inconsistent with the actual behavior of a Mac... Open a finder window and hold shift and click on items that are not vertically next to each other and a group is selected... Now do it in logic, and it causes GREAT frustration and annoyance. What happens if you have a million note events that you want to erase? You have to go page by page and click with shift on each one?? Or drag a selection and wait for logic to scroll you to where you want to go?????????? No thanks.
Arrange stuff:
* "REGIONAL CONTENT" (meaning the visual representation of note events) does not accurately depict the event data as note lengths cannot be visually identified. Everything shows up as a generic quarter note... My #1 suggestion is that regional content should be customizable so that you can view it in a miniature matrix data style. The biggest problem for me is that I cannot see where my notes end-- I can only see where they start, this makes it very difficult to identify what I am looking at.
* Track automation data should only be inputable by the pencil tool. I cannot mention how many times automation data has accidentally altered when using the arrow tool. The pencil tool should allow you to raise and lower the lines reflecting automation data... What is the point using the pencil tool for automation if it's only function is to create "points" yet you can also create points with the arrow tool..??? Pencil tool should act as the arrow tool does in the sense that it raises or lowers automation data.
* Recording preferences do not offer the option to automatically merge new part with existing part when a region is NOT selected. How annoying is it to have to select a part every time you want to record something just so it will be included in that original part!
* Ruler at the top of the screen should also give an option for tuplets. 5, 7, etc.
* When in record mode, if you click on the ruler to another time position, all audio instruments cut out and it takes approximately 3-4 seconds before tracks begin playing audio. This becomes very annoying if you are trying to do a pick up and want to just start 1 measure before hand.
* There should be a way to EASILY (without having to cable two tracks together in the environment) temporarily link multiple tracks together so that automation data will be duplicated. So theoretically you can link 3-4 tracks together, and by adding automation data to one, you are adding it to all 4.
* If a part is soloed, and you hit record. The part stops being soloed and you can no longer hear it. This makes it impossible to record a pick up on a soloed track unless it's locked, but it shouldn't need to be locked.
* When you are zoomed in tightly, and you are trying to align notes within two parts on different tracks (meaning using the PSEUDO NOTATION DATA that appears in the part to align), there needs to be a VERTICAL line that snaps to the note closest to the mouse cursor. When trying to do this in parts that are a far vertical distance apart, it becomes VERY difficult to eye this alignment. Logic does this with automation data.. but for some reason they left it out for actual part alignment...
* There should be a way to force the downbeat of a measure to occur at any given moment... What I mean by this, is composing for film is an absolute PAIN in Logic. Scenes, last for odd amounts of time, and Logic's reference manual claims that you can solve this by using various tempo tricks, however it is ineffective for the most part. What Logic needs is the ability where you can click on a drop down menu item within the arrange window and FORCE that where ever the song locator is, the rest of the measure is eliminated and a new measure downbeat occurs right there. This will allow you to always have new scenes on the downbeat of a measure without having to mess with your tempo and meter.
Hyper Edit Window:
* I can't even begin to comment on this... The hyper edit window is one of the worst things I have ever seen in a music/audio program. It is a horrible interface, you can't get it to do anything correctly without messing everything up. This thing needs a complete overhaul... I mean, just try to create a simple crescendo with note velocity and it will take you all night.. Try to add pitch bend data, and it adds note velocity data as well.. It's a total nightmare, and I would love to hear someone's practical application of this window.
Score Window:
* The method that the song position locator moves along with the notation is very strange. It is not at all how a person's eyes function when reading music. A much more logical approach to this would be for a transparent colored block of some type to highlight an entire measure, and each note head will glow as it sounds. The current way is so strange, it speeds up and slows down-- makes absolutely no sense, and it is more disruptive than anything.
* When the Hyper Draw > note velocity area is exposed, if you use the velocity tool to increase/decrease a particular note's volume, the data in the hyper draw window does not update in real-time as you use the velocity tool. This behavior is inconsistent with the matrix > hyper draw's note velocity section-- where as in that area, the velocity ball/lines do update in realtime.
EXS24:
* when you are in many levels of subdirectories and you are auditioning instruments, it becomes very time consuming and annoying to have to continually trace through all the subdirectory paths. There should be a feature directly under the load instrument window that takes you to the subdirectory of the current instrument.
* Seems when SONG SETTING > MIDI > "chase" is turned on... When starting sequences using audio instruments, (I am using a harp sample within the exs24), there is a latency hiccup upon starting, which is very disruptive when trying to listen to a short isolated moment in a composition. And I do want to chase note events in general-- but this present situation makes it difficult for me to work. I would suggest that you can specify tracks to exclude chasing.. Or fix the latency hiccup issue.
Thank you.
-Patrick
http://collinatorstudios.com

this is excellent patrick. can you number your points so that the thread can be discussed?
1. yes
2. ok
3. great idea
4. even better idea. you could set something up with aggreagate device i suppose but it would be better to have the feature to hand.
5. you need to look into your project manager prefs. scan the paths and the links to the audio files will be saved meaning they will load up in a fraction of the time.
6. yes this is nuts. you can skip all and sort it out with PM but then you shouldn't have to.
7. this exists already. perhaps it ought to be a default but you need to set your esx prefs to 'keep common samples in memeory when switching songs'. then it will do just as you wish it to. you can also use the au lab in the devlopers kit which will allow you to load in au units etc seperately from logic, which logic can then access. this is a good way of getting around the 4 GB memory limit with logic too.
8. ok, don't know about this bug.
9. yep happens here too.
10. doesn't worry me this one. you can turn off midi out.
11. yes this is silly.
12. well, i think this is something we can get used to. i am a musician and i am used to seeing '24'.
13. you can already set up groove templates to allow for quantizing irrational tuplets. i do it all the time. i would like to see step input for irrational tuplets though.
14. yes this is silly. the button for the KC 'content catch' is getting very worn out.
15. ok.
16. not sure i understand this one.
17. yes this drives me nuts too. i have to lock screensets to get this to stay off.
18. you can use KCs for 'go into/out of sequence' - but yeah.
19. ok
20. there are a couple of features that use old technology that cause hangs and poor performance. score is a good example of that. maybe the matrix is too. the score is being updated we assume with newer technology maybe the matrix will too.
21. there are probably better ways of adjusting velocity than using matrix or hperdraw velocity. have you tried holding control-option and click dragging a note in score?
22. as i pointed out in 20, this is an old feature. you could change things to be consistent with modern macs and annoy long term users such as myself, or leave them and let them be inconsistent to confuse newbies. i think depending on what it is we oldies could upgrade our work habits.
23. this one doesn't worry me so much.
24. good point (no pun intended).
25. well, i find the opposite - that merging new parts to objects i have accidentally selected to be annoying. perhaps more detailed prefs?
26. yep.
27. this will be down to your audio settings. you can improve this lag but it will be dependant on the capabilities of your system.
28. i don't know why this feature doesn't work in logic. it is supposed to have ti already and i just don't understand why it doesn't. maybe it will be fixed in the next upgrade.
29. agreed.
30. ok - i have other work flows for this but it would be nice.
31. i don't agree that logic is a pain to score with to film, i do it nearly everyday. but you are discribing an interesting feature which might be worth discussing more. i think you might find yourself getting alarming and unmiscal results doing this that will end up having to be sorted out the conventional way. but its a good idea.
32. oh yes.
33. yeah - this could be improved.
34. ok, well i wouldn't go about it this way, but yeah there is generally sticky spots with regards to updating of information al around logic.
25. very very good idea.
26. there are lots of problems with the chase function. very annoying. i certainly agree with this.
in general, some of these could well be done as their own threads. some of the missing functionality may exist. if you can confirm a bug then you are on stronger ground when you submit feedback. but this list is full of fantastic ideas.

Zoom problems with G30

Similar Messages

Maybe you are looking for