Zoom while video recording (bug) - Video flickers back and forth on playback

Using iphone 5s iOS 7.0.2
If i zoom slowly during video recording, when playback the video, during the period i zoomed in or out, it just flickers back and forth (in and out). which ruins all the video.

I just tried it on my iPhone.  Same specs.  No issues.  I'm assuming you're doing playback on your phone?
- JC

Similar Messages

  • I just got a ipod touch 5th generation and i was wondering if you can or how to take a picture while your recording a video?

    I just got a ipod touch 5th generation and i was wondering if you can or how to take a picture while your recording a video?

    https://itunes.apple.com/us/app/videosnap-taking-still-photo/id552270851?mt=8
    The manual does not show that feature natively for the iPod. Later iPhones and iPads have that feature natively.

  • Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly it and switch back and forth from video to still pics and while I may have filmed four videos sometimes Quicktime tells me that one of them can't be pl

    Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly the drone and switch back and forth from video to still pics and while I may have filmed four videos , sometimes Quicktime tells me that one of them can't be played . Checking the info shows that each of the unplayed videos was saved in the same mp4 format as the playable ones yet some of my most important videos won't play . It's getting very frustrating .

    first; I use Perian, that helps even though it is no longer supported, (must have for avi files)
    the apple-cores at apple have gotten very sloppy -- quicktime is a bit finicky and flakey. 
      example,   occasionally (when copy file from quad's card to hard drive)  the avi will show up as a 'mov' file and qt plays it no problem and no conversion.
    but that is very occasionally,  most of the time qt won't convert the file,   -- iMovie won't open an avi without Perian installed  ,  I don't know how that effects qt.
    qt 7"pro" is no good either, (qt 10 does everything it does and for NOT the extra $35)  
    I have gone to VLC  and MPlayerX  for direct playback for drones and cameras.  

  • I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

    When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

    Where did the media file come from?
    Does it use a variable frame rate?
    What version of Premiere are you using?
    Variable frame rate video problems:
    http://forums.adobe.com/message/4897424#4897424
    http://forums.adobe.com/message/4071506#4071506

  • Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

    do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

    do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

  • Exported video's frames back-and-forth quickly

    When I played my video in the studio playback, it was perfect. But when I exported it, when I played it, its audio was perfect, but the frames go back-and-forth very quickly. Can anyone help me?

    We need to know a lot more if we're going to help you.
    What version of Premiere Pro? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Tell us about your computer hardware. Are you using Mercury Playback Engine GPU Acceleration?

  • My iPod 4th generation screen shakes back and forth every once in a while and the touch screen stops working. Then I have to hit the sleep button on and off to make it work

    My iPod touch 4th generation screen shakes back and forth every once in a while and won't let me use the touch screen. I have restored it at least 5 times to factory setting and it is still happening. The only way to stop it is to hit the sleep button off and then on again. It happens about once every 5 minutes. Please help.

    If you successfully (completed all steps without errors) restored to factory settings/new iPod and still have the problem that points to a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPhone: Using embedded QT movies that either Loop or Loop Back and Forth

    Hi to everyone,
    I'm working on a very simple iPhone app:
    it has several buttons that launch different QuickTime movies embedded in the application, that will either Loop or Loop Back and Forth.
    The desired looping behaviour is already set within QuickTime itself (those settings are available in QuickTime's View menu).
    So far it doesn't seem to work, as the iPhone's SDK doesn't seem to recognize these QuickTime settings of Loop or Loop Back and Forth.
    I've been trying to find advanced documentation on the matter, with no luck.
    Does anyone knows if it's possible to create an iPhone application that has embedded QuickTime movies that either Loop or Loop Back and Forth?
    If it is possible to do so, can you please post some code (or links) explaining how to proceed?
    If the feature is not currently supported, does anyone knows if it will eventually be supported by Apple (maybe in a future SDK revision)?
    While I don't know the entire context the SDK engineering team has to contend with, it seems to me it should be rather simple for Apple's iPhone SDK to simply accept the settings already put in place inside a QuickTime movie.
    Many thanks in advance for any feedback on this!

    Well, my programmers have come back to me and the news is not good.
    The QTMovieLoopsAttribute is not supported in the SDK's QT Kit.
    I'll now call it SDK's *QuickTime Kit Lite*, if you don't mind.
    *QuickTime Kit Lite*, the key audio/video toolbox available for development of applications on the iPhone through the SDK, provides a single option:
    a Play / Stop button.
    The only other thing available (I think) is the option to hide the play/stop controller. That's it.
    Apparently, there are several unofficial, private frameworks that give access to lower-level QuickTime functions and that may provide a way to actually loop videos, but chances are that an app using these unofficial frameworks would get rejected by Apple upon submission for the store.
    I'm still waiting for more info and the final word from my programmers, but from the looks of it, this is going to be a show-stopper shortcoming of QT Kit Lite, as far as my project is concerned.
    I'm probably going to have to fold my project and wait (hope) for an eventual upgrade to the SDK's QT Kit.
    By the way, does anyone knows if there is a way to communicate with Apple and request new features for inclusion in future revisions of the SDK?
    Upgrading the QuickTime Kit librairies to include the video Loop and Loop Back and Forth Attributes would be my first (and only) request.
    many thanks to all!

  • Best way to make a short movie that can play back and forth smooth?

    Hi!
    I have a short .flv clip (video) of a shoe rotating 360 degrees.
    The clip is less then 4 seconds and about 320kb in size and I'm using flash CS4.
    I'm trying to build some sort of a player that lets the user scrub through the movie (back and forth).
    The player is also supposed to be able to play the clip back or forth at a speed selected by the user.
    I have read kglad's reply about "How to play backwards flv imported in timeline on flash cs3?", and the code works perfect, except that the video is not playing smooth when played backwards. I guess when playing normal, the next frames are by default buffered, but when playing backwards they are not...
    Which is the best way of doing this?.
    Maybe it has already been done? Has anyone heard about something similar?
    Thanks in advance!

    Hi!
    Please find the file attached. I changed the file extension from .fla to .eps.
    (I also added one with the extension .mpg)
    Basically I just want to be able to rotate the shoe in either direction,
    but then I also would like the user to be able to "spin" it.
    Meaning that when the user turns the shoe around, the speed is recorded,
    and when he releases the mousebutton, the shoe will continue to rotate at that speed.
    Do you think it could work using video? Or do I have to use stillimages instead?
    Your script worked, but the film doesn't playback smoothly..
    Thanks in advance!

  • Episode stops at one moment and the picture moves back and forth!

    I have bought a series of 4 episodes. The first two were working just fine, but the 3rd one stops exactly at 5 minutes 30. in itunes, the picture starts moving back and forth and when i scroll to another point in the timeline, the image gets green or the episode is playing in high speed!? at about 10 minutes the video seems to start working again.
    As far as i have seen, episode number 4 is working fine as well.
    i installed the newest versions of itunes and quicktime but it didn't help
    maybe something went wrong while downloading? if so, is there a possibility to redownload it somehow?
    Thanks for helping!

    That's strange. Have you tested this with TextBox and a regular binding? Perhaps it's related to the TextChanged event firing to update the binding?
    Vote if help you

  • How do I toggle back and forth from the live site in the tutorial to the working site?

    How do I toggle back and forth from the live site in the tutorial to the working site?

    I think that if you scroll down the page to the third video, you will find what you're looking for.
    Best regards,
    Randy Nielsen
    Product Integration Manager, Creative Cloud Learning
    Adobe

  • Image shifting back and forth

    Is anyone experiencing strange shifts back and forth of images while they are working with them?
    The image moves about 1mm diagonally, sometimes a couple of times.
    Also scrolling of galleries seems to be much less smooth than before, sometimes locking up for many seconds, or the screen going completely white and then coming back.
    Everything seems to have started happening after upgrading to LR1.3 (I am on 1.3.1)
    I am also experiencing strange flickers on my screen even when using other programs as long as LR is loaded.
    Windows XP 4GB / ATI Radeon 256MB
    (So it is not an Nvidia issue)
    I'm starting to think that a downgrade to LR1.2 may be a good thing.

    Don,
    The image is supposed to dance around on it own?
    I took a closer look, and I think that I know what's causing it. It needs to be fixed, because it is reaaaaaly annoying.
    If you are in any mode, and the image is enlarged (not grid), you will notice a small drop shadow going down to the right. Well, what is happening is that the drop shadow is changing to visible / not visible, and when the drop shadow is not there, the image moves down and to the right to the spot where the drop shadow was, and when the shadow reappears the image moves back up to make room for the drop shadow. So the image just dances diagonally a few times for no apparent reason. But the reason is a drop shadow YES/NO fast toggle.

  • Blue background when moving my macbook screen back and forth

    When I move my screen past the 90 degree angle, at a certain point, the background on my safari windows will turn a light blue with very small striped lines.  Under words or my mouse, however, the background is still white. 
    Thanks for any help.

    It is an external HD, yes, but a "portable" HD... I have also tried just the external HD but found it very bulky and I always had to lug around the power supply and cords for the HD. Google "portable hard drive passport 500gb"... for example... that's what I use.
    http://www.google.com/products/catalog?hl=en&sugexp=pfwl&tok=o-MzmA7RWsR0_HVA9BIvtg&cp=32& gs_id=2n&xhr=t&q=portable+hard+drive+passport+500gb&gs_upl=&bav=on.2,or.r_gc.r_pw.,cf.osb& biw=1176&bih=861&wrapid=tljp1327460600580060&um=1&ie=UTF-8&tbm=shop&cid=116127269428491234 13&sa=X&ei=DHEfT9G5Goeq2gWr2umRAw&sqi=2&ved=0CJgBEPICMAE#
    I had originally set up my client files on my desktop... those files not only included the Web site files, but ALL related communication, content, development files (images, videos, Flash). Nothing worse than being away from home and realizing I'd forgotten to take the photo/text/video development files with me. So I just copy/pasted the ENTIRE client file on the the portable drive... which included any DW site files. Now you may have to adjust some drive names (D:, L:, J: or whatever.) but you can hot swap back and forth and always carry the current version with you to whichever computer you are on
    A "portable" HD rather than just an "external"...which may need it's own power supply, means that you can hot swap the HD, just like a thumb drive.... only a heck af a lot BIGGER!
    ....But during testing and set up... always keep a complete backup of ALL files until you get your particular set up working.
    Best wishes,
    Adninjastrator

  • Command Button colors corrupt after switching back and forth from design view.

    I would say my experience level with Access is "getting there."
    I therefore don't thing I'm making a newbish mistake.
    Has anyone else noticed this?  As it's bugging me quite badly.
    1.  A command button has had it's color formatted (pressed, hover, etc. nothing fancy)
    2.  It works fine.
    3.  In my navigation form, if I switch to design view, then select a given sub-form... like "customers" - and switch back out of design view, to form view - then without fail, all customized command buttons within that sub forms' color will 'corrupt'
    ie, change.
    4. Closing and reopening the navigation form (ie, my main menu) restores it, but the same thing will happen should I go back to design view for the sub form.
    5.  Finally - this behaviour does not happen when switching back and forth between views on the original form that isn't a sub form in the navigation form.  (Ie,. the main 'customers' form). 
    Can any clever folk give me a solution? :(
    Thanks,  
    Eric Rowlands
    EDIT - My apologies, I am using Access 2013 for a desktop database.

    1) We will need to understand whether the issue is seen on any sample database.
    2) IS this seen only on your system, we would need to check on other system also
    3) If the issue is seen in all system & issue is not seen in the sample database then this could be database specific issue
    4) As per my understanding the issue is consistent, we would need to find what is the VBA code or which code is used while designing this form.
    5) We would need to see if the issue is seen only on that particular navigation form?
    6) Is the button gets corrupt I mean to say non-usable once it get discolored ?
    7) What is your end goal just in case if you are able to work on your database i.e. when working on the navigation form without going in design view is issue still seen there ?
    8) Since when are you experiencing this issue ?
    9) If possible please provide me the environment details of your system & Access application, whether the issue is seen only in access 2010 can we check in access 2007 or in access 2013.
    I would really appreciate if you can answers the above questions this will really help us to isolate the issue further
    in terms of technical troubleshooting after answering the above question I might come up with another question so that we can do extensive isolating the issue so the if required we can involve the developer also.

Maybe you are looking for