Zooming in and saving the effect
How do you save pictures where you have zoomed in? I have pictures from an African safari and I want to zoom in and save them but after I zoom in and do other editing, the zoom effect disappears. What can I do to save the zooming in effect?
Is this what you are trying to do?
Here I just want the blue bird. I used the Rectangular Marquee to select it.
Then Edit > Crop and save the result as a new file.
Or you can copy the selection to the clipboard (Edit > Copy) and do File > New from Clipboard.
The result is the same with either method:
Similar Messages
-
When importing my video from the event library to the project library, it's zooming in and
narrowing the width of my footage. How do I stop this from happening?In the project, double-click on the clip to open the Clip Inspector. In the Clip tab you will see an item about two thirds down labelled "Stabilization". If checked, uncheck the box "Smooth clip motion".
Stabilizing clips causes a zoomed in effect, with the extent of the zoom dependent upon how shaky the footage is. There is a slider beneath the check-box labelled "Maximum Zoom" - this can be draggged back and forth to adjust the zoom effect if desired, once the clip has been stabilized.
You may have chosen to analyze clips for stabilization when importing to iMovie (that's a choice provided by iMovie upon import). If so, it's best to turn off an option in iMovie's preferences. Go to this from the iMovie menu item iMovie>Preferences. Click on the Browser tab and deselect (uncheck) the box labelled "Automatically stabilize clips that have been analyzed".
I prefer to import clips without analyzing, as this speeds up the import process. Afterwards, in the Event you can check for any overly shaky clips, then analyze them in the Inspector. If necessary, once dropped into a Project, you can stabilize them as desired. You can also stabilize clips directly in the Project without having to first analyze them in the Event.
John
Message was edited by: John Cogdell -
How to stop the removing a user account and saving the home directory to a disk image?
I tried to delete one of two administers on my iMac (10.10.1). After more than 12 hours it will not let me quit System Preferences for it "is removing a user account and saving the home directory to a disk image". How do I finish deleting the administer and quit System Preferences?
I would recommend asking them in C# forums: https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral&filter=alltypes&sort=lastpostdesc
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!
Sorry to be such a moron with this, but I just don't have much experience with this iPad. I have had it for over a year and I just keep adding stuff to it and it has worked great. Now that the memory is used up, I am trying to figure out how to free up space and not lose what I have paid for.
So, Step 1 is complete, as I have "Transferred" all of the purchases.
What is Step 2? I unchecked the concert on the iTunes library, did a sync, but it's still on my iPad.
Thanks again for the help!!! -
Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.
but, when I back to read my old emails in inbox it's gone away, I have backed to setting and return the previous
incoming mail name, but also I did't get the old emails. where I can find the old emails in my IPAD2 ?It is only the link to your emails which are 'stored' on your iPad. You will have to enter all proper email addresses to get the message associated with them, which, in practice, means multiple accounts. If all still does not work try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].
-
How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App
How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App
Darrell,
Thanks for this response. After I posted mine, I saw that the resetForm JavaScript method is documented as being supported starting with version 10.5: http://www.adobe.com/devnet-docs/acrobatetk/tools/Mobile/js.html
But I haven't been able to get it to work. Can you clarify if support was indeed added and if it works for you? -
Zooming in and saving photo that way
Hi,
Basic question for you. I have i photo 7.1.4 and in my photo library, when i click on a photo then click on edit then use the zoom to zoom in an area of the picture and position it, how can i save that blown up version? If I click Done I don't see any saved version anywhere. ThanksSelect a photo, click edit, click crop, if you want to constrain the crop set the constraints and drag the edges of the crop window where you want the edges of the photo to be - click apply and you now have a "zoomed" photo - to undo you can type command z or right click( control click) on the photo and select revert to original
LN -
Fixing cells and saving the book...
hi,,when we enter a planning book with a selection, it becomes aggregate level right...if i fix a cell and save it at this selection, what happens, will the fixing also be saved?..in my case for some planning books it saves the fixing, for some other it removes the fixing...i don't have any aggregates created on it(as per the document, to save the fixed values, aggregates must be created for that char combinations) ...next when i drill down on one charectaristic there(details level), and if i fix the cell on 'total' row and save , the lock icon is getting removed...can you throw some light on this issue if you have time...
Thanks for reading...
uma maheshsolved on my own..thanks for reading..
-
Sampling sine wave and saving the samples in an array.
helo..
I am new to Labview and i need some help regarding sampling the sine wave.
I have generated the sinewave in labview and now i want to sample it.(do i need an ADC for sampling?) and the samples should be saved in an array.
I dont know how to do this.
Please tell me how to do this or post some related examples..
Thanks in advanceAll of the functions that generate a sine wave in software do save all of the samples in an array. You just need to know how to get them. Since you did not mention the function you used to create the sine wave, lets assume it's the Express VI Simulate Signal. On the signal output, wire a Convert From Dynamic Data type function and select the default 1d Array of Scalars. Right click on the output of this and select Create Indicator. You now have the array. If you are using Sine Waveform which outputs a waveform data type, just wire up a Get Waveform Components function and select the item 'Y'.
For learning the basics, please see the free tutorials
Message Edited by Dennis Knutson on 10-28-2008 08:23 PM
Attachments:
Get Y Array.PNG 4 KB -
RickTextbox - getting and saving the text to and from SQL server database
I have no trouble saving the data to an SQL Server database. Here is a sample of what is saved.
{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset0 Microsoft Sans Serif;}}
\viewkind4\uc1\pard\f0\fs17 testing the\par
rich\par
text box\par
when I retrieve the text from the database, I end up with exactly what is shown above. I am retrieving the text with a SqlDataReader. here is the code that I am using;
while (sqlDataReader.Read())
string special_Instructions = ""; //first I was using this line but both lines have the same result // special_Instructions = sqlDataReader["Special_Instructions"].ToString();
special_Instructions = sqlDataReader.GetString(5);
special_InstructionsRichTextBox.Rtf = special_Instructions;
any guidance or help will be greatly appreciated.
daveMichael,
Lets begin with, 'Thanks for your guidance'. With your last run of questions, I was able to figure it out.
Here is what I learned, (by the way, this is in Winforms):
When I checked the properties of the RichTextBox control, I saw and then remembered that the control was bound to the form. First thing I did was comment out the code I was using (above) to fill the control and tested the program. I actually
received the same issue with the contents of the control as before.
I then dropped a new RichTextBox control from the tool box to my form and positioned it next to the original control. I un commented the above code and used it to fill the new
richTextBox1.Rtf and ran the program. The original control that was bound to the form still gave the incorrect result but the new control worked perfectly.
I hope this helps others and Thanks again for your guidance. If there is anything else you think could be added to this reply please let me know.
dave -
I want to know if there is an Add-on for Editing webpages and saving them to the actual website, and you can change it back at anytime, just you the person that edited it.
So making an edit of a website that's only visible to you and that you can change? No I don't think such a thing is possible. You can download the page to your computer and make edits that only you can view.
-
Graphics2D and saving the image
my program loads different images and display them on the screen.
my question is how can make what is displayed on the screen saved in one jpg file?
here is the code that loads and displays the first image:
InputStream in = getClass().getResourceAsStream(filename);
JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder(in);
BufferedImage image = decoder.decodeAsBufferedImage();
in.close();
// Draw the loaded image on the offscreen image.
g2.drawImage(image, 0, 0, this);
the code that loads and displays the rest of the images
for(int i=0; i<ex.length; i++){
String filename2 = ex[i] + ".jpg";
//wait for the image to load
Image img2 = getToolkit().getImage(filename2);
loadImage(img2);
InputStream in2 = getClass().getResourceAsStream(filename2);
JPEGImageDecoder decoder2 = JPEGCodec.createJPEGDecoder(in2);
BufferedImage image2 = decoder2.decodeAsBufferedImage();
in2.close();
g2.drawImage(image2, 50 + i*30, 120, this);
PLEASE HELP !!!!!!:
I already know that I need to use
OutputStream os = new FileOutputStream("Holla.jpg");
JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(os);
encoder.encode(imageBuffer );
but I have many buffers here.
Should I just add them up together into a one and encode that one?
PLEASE HELP!!!
Thank u.import java.awt.*;
import java.awt.image.*;
import java.io.*;
import java.net.*;
import javax.imageio.*;
public class Example {
public static void main(String[] args) throws IOException {
URL url0 = new URL("http://today.java.net/jag/bio/JAG2001small.jpg");
URL url1 = new URL("http://today.java.net/jag/bio/JagHeadshot-small.jpg");
BufferedImage image0 = ImageIO.read(url0);
BufferedImage image1 = ImageIO.read(url1);
int w = image0.getWidth() + image1.getWidth();
int h = Math.max(image0.getHeight(), image1.getHeight());
BufferedImage result = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
Graphics2D g = result.createGraphics();
g.drawImage(image0, 0, 0, null);
g.drawImage(image1, image0.getWidth(), 0, null);
g.dispose();
ImageIO.write(result, "jpeg", new File("result.jpeg"));
} -
Changes are not reflected after editing and saving the chart in th WAD 3.5
Hi all,
I have to display the chart in the report using WAD 3.5. But after creating a chart and then when ihave to make extra changes again and save the same, the changes are not reflected. I can see only the previous changes.
I am working on the chart for the first time. please let me know about the problem. My changes to the chart are not getting reflected.
Please help.
Thanks
RaniHow r u changing the graph??
Hope you are doing a right click and selecting Edit Chart. Click on Refine.
Then Click on Next till you get the button Complete. After you click on Complete, you save the Template.
Hope you are following these steps. -
Adding numbers in a file a and saving the output in another file.!
can any one pls tell me how to add numbers from a textfile and save the output in another textfile. i'm new with java so pls help out..
Hi Friend,
your statement is not clear, it's bit confuse
this is my unserstanding,
you want to open a file and read the values then add numbers,
latter save the sum in a new file.let me know if this is the thing, I can help u
with Cheers
Prasanna -
Hi,
I'm presently working in a scenario, where i need to read an XML (having base64 encoded images) using XmlReader class in a streaming fashion (considering the performance) .
1) I have to strip offs the base64 encoded contents from the xml (front & back image node).
2) Than saving the remaining XML (without base64 content) .
Sample XML:-
<?xml version="1.0" encoding="utf-8"?>
<tran>
<tranheader>
<feild1></feild1>
</tranheader>
<item>
<fields></fields>
<image>
<frontimage>base64_content</frontimage>
<rearimage>base64_content</rearimage>
</image>
</item>
<item>
<fields></fields>
<image>
<frontimage>base64_content</frontimage>
<rearimage>base64_content</rearimage>
</image>
</item>
<trantrailer>
<feild1></feild1>
</trantrailer>
</tran>
Please guide.
Thanks & RegardsE.g. a simplified skeleton:
namespace ConsoleCS
using System;
using System.IO;
using System.Xml;
using System.Xml.Linq;
class Program
static void Main(string[] args)
XDocument xdocument = XDocument.Parse(@"
<Items>
<Item>Test with a child element <more/> stuff</Item>
<Item>Test with a CDATA section <![CDATA[<456>]]> def</Item>
<Item>Test with a char entity: A</Item>
<SkipItem>Item to skip.</SkipItem>
<!-- Fourteen chars in this element.-->
<Item>1234567890ABCD</Item>
</Items>");
StringReader stringReader = new StringReader(xdocument.ToString());
XmlReader xmlReader = XmlReader.Create(stringReader);
xmlReader.MoveToContent();
while (xmlReader.Read())
switch (xmlReader.NodeType)
case XmlNodeType.Element:
if (xmlReader.Name == "SkipItem")
Console.WriteLine("Skipping..");
else
Console.WriteLine("Pushing to output ({0}).", xmlReader.Name);
break;
Console.WriteLine("Done.");
Console.ReadLine();
Maybe you are looking for
-
Processamento de extrato bancario externo-(v9.0 Pl.11)
Olá a todos! Estou precisando gerar pagamento das tarifas a partir da tela de "Processar extrato bancário externo". A Importação do extrato foi feita pelo BankSync. Não estou com a opção de "Instalar processamento de extrato bancário" ativo, quando s
-
Got a ipod nano for Christmas. Installed already bought tunes on it with my computer at the time which was running Vista OS. Had to buy a new computer in March with Windows 8. Did not buy any songs until April 29th or so...but they will not show in
-
i try to sync the my imac to my iphone and the imac says it synced just fine. my iphone says it's unable to sync.... and it has not supported by the imac..... HELP....
-
How to hide screen group tab based on account group in XD01/02
Hi Folks, I have added two screen group( custom tabs like 'general data' ) in XD01 screen. Based on the input parameter 'account group' I want to hide(supress) one of the tab. How can I read the account group no? Thanks and Regards, Kawish.
-
Can't set sound clip as message tone
I have an N73 and i noticed that i cant use any of my sound clips as my message tone. I can for ring tone and i also notice my friends N73 allows her to do it but i dont have that option any ideas??