Zpca_c03, delta reset problem

Hi All,
I have a problem with the delta loads to ZPCA_C03.
We have done full loads till March, monthly wise and set the delta init flag during a system down time.
Again we happened to do December data re-load to the cube. As the cube is duplicated with the december data, in ambiguity we have done selective deletion to remove the double december data, which is wrong. Now the delta is not working.
How to resolve this issue, possibly without a down time!!!
We need to have december data again and on going delta to be reset.
Regards
Raveena

Hi,
I need a clarification on this.
Is that the uploaded data successfullly loaded to the external system or not?
Are you uploading data to the cube or some thing else?
Regards,
Srini

Similar Messages

Automatic reset problem (Palm Centro)

Recently, my phone begins to have a new problem.
When I use the phone, it automatically resets if I touch the screen during the conversation.
It disrupt my conversation.
I had done hard reset; but, the problem came up again.
What can I do?

Did the problem immediately return when you finished the Hard Reset, or after doing a HotSync? If the latter, then the problem is software-related and saved on your computer.
Did the phone get damaged in any way? Get wet?
Here's my normal help file for clearing out reset problems:
As with most problems that occur on a Palm phone or PDA, it is either software or hardware related and we have to determine which one.
Best method is to first make a complete backup of your unit to your SD card using the free "NVBackup" (available from http://www.freewarepalm.com) After the backup is complete, Hard Reset the unit, then test to see if full functionality returns.
Perform a Hard Reset as described in this Palm KB article: http://kb.palm.com/wps/portal/kb/common/article/45050_en.html
DO NOT HOTSYNC YET! Test the unit before reinstalling any software. If the unit works correctly, your problem is being caused by a "drug interaction" of software - maybe one rogue program, or a combination of several. You'll have to reinstall the third-party programs one or a few at a time to find the problem one. To avoid re-installing a software issue, rename your /Backup directory in your Palm folder (on a PC it's found here: C/Program Files/Palm(One)/"your HotSync ID name truncated"/Backup) to something like "/BackupOLD". Now perform the HotSync, choose your HotSync name you've been using, and all your PIM data will return, but not the third-party programs. Test for functionality again. If all is good, start installing the old programs from your /BackupOLD directory one (or a few if brave) at a time.
If the unit does not work after a Hard Reset is performed correctly, then it may be Hardware-related. (If it's a connection problem via either BlueTooth or Wifi, be sure nothing has changed on the unit you're trying to connect to!)
Hope this has helped,
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

RE: freezing and resetting problems when syncing a large music library

Hi there,
I got a new ipod classic 160gb for christmas. I updated the firmware to 1.0.3 and synced it for the first time. When I tried to play any music it locked up and went into a loop of resetting itself which I could only break by forcing the ipod into disk mode.
I restored the ipod and tried again syncing the music in chunks. This worked until the ipod was about 50% full then it started to freeze and reset again. I took this ipod back to the store but the new one had the exact same problem!
Through a lot of trial and error I have managed to get the ipod working with only part of my library synced. By syncing music a few albums at a time I have managed to get about 86gb (of 120gb) onto it, but surely this is not how it is supposed to be! I have a dual boot system and have the same problems using windows XP or vista.
I know that I'm not the only person experiencing resetting problems with the ipod classic. Are the users who are experiencing these endless resetting problems with the ipod classic those who have large music libraries (i.e over 80gb)? Can the ipod classic simply not handle the large volumes of music it was designed to hold?
The only features I was looking forward to in the new ipod were a) larger capacity hard drive and b) the ability to organise playlists into folders on the ipod for easier browsing. As it stands I cannot sync my full library and navigating through my playlists is so slow it is hardly worth bothering. I never had a minutes trouble with my 5th gen.
Have I been unlucky and the ipod classics I have recieved have been duds? In which case should I arrange another replacement? Or is this typical of the ipod classic user experience when the user has a large music library and many playlists? Should I await a firmware update that might remedy my problems?
Lastly am I doing something wrong? Any help or workarounds would be gratefully appreciated.

best thing to do is use Playlist and Smart Playliss to fill your iPod. Just so you know, since your post seemed to indicate you thought the playlists have to be tailored to what is already on the iPod, when you sync to playlists, any songs needed for those playlists are automatically moved onto the iPod. And any songs NOT in the playlists get removed.
Patrick

MOVED: MSI KT880 Delta-FSR - problem with multiplier

This topic has been moved to Overclockers & Modding Corner.
MSI KT880 Delta-FSR - problem with multiplier

http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
wiretrick it so multipliers under 12.5 will work
assuming the cpu is an old unlocked one

K8NGM2-FID warm reboot/reset problems

Hi everybody:
The system:
MSI K8NGM2-FID Bios V 3.4
RAM - G.SKILL 2GB F1-3200PHU2
Processor Athlon X2 3800+
Drive WD2500YD 250GB 7200 RPM SATA150
DVD R/W Pioneer DVR-111D
DVD-R ASUS DVD-E616AG
Case Antec Sonata II w/ Antec 450 W PSU 3.3 V/32A 12V1/15A 12V2/17A
OS WinXP SP2 w/auto update set
The Problem:
When the system runs for more than 1-2 minutes and I do a restart under Windows OR hit the reset button it hangs with the HDD light on steady and no video output.
If I try a warm restart or reset button push immediately (10-30 seconds) after windows comes up the system restarts OK.
When the system is 'hung' repeated hits (short or 5-10 seconds) on the Reset button have no effect besides causing the DVD lights to blink (i.e., they seem to be getting a reset signal) but HDD light is still steady.
If I power the system down and restart it reboots OK - this means power down from the 'hung' state OR power down from Windows via 'Start' --> 'Turn off computer' or momentary push of power switch.
Looking at the Windows system log I see that warm boots done before many system processes load are successful, those afterwards are not. I have tried disabling these processes (i.e., App layer gateway, SSDP discovery, Norton protected storage) w/o any change in behavior.
This looks like a hardware problem to me, but I want to be sure it's one before I R&R the mobo w/ a spare.
Has anybody else seen this problem?
Thanks,
ss

Update:
It was the mobo - R&R w/new one: warm boot/reset problem gone. Plugged in drives w/o doing any software reinstall and unit came right up (and down and up and down....).
This is the second K8NGM2-FID that has gone south on me since March.
Both have been Ver 2.0 builds; the other one has a problem with onboard video but continues to function with an add-in video card (yah, it's better video too, but that's not the point). The warm boot problem described in the original post isn't a show stopper, either, but I can't use these boards in a system for sale (unless I sell it to my brother-in-law).
I have built eight systems since March using the K8NGM2-FID. Six were for customers and are still under my personal six month no-questions-asked warranty (the extended 12 month lots-of-questions-asked starts after six months). I have had to eat two at this point and am not too happy with the board. Since MSI no longer makes this board I am having to use another vendor's mATX-6150 unit, perhaps for the better, I don't know.
IMHO MSI is the best board maker in the consumer/office sector. I hope they can stay that way.
ss

K7N2 Delta LISR Resetting problem

Hi Guys Posted a while back regarding my system resetting all the time and have done the two things that were recommended to me me which was proper power supply and recommended memory as you can see i have spent £160 on these two items and am now pulling my hair out because my system is still resetting when i do anything that is graphically or resourcingly more than just surfing the net
the heatsink is fine and on correctly temps are fine and do not rise above recommended levels
8 x AGP is disabled
but i still get a reset with windows informing me that the system has recovered from a serious error and the following is the reason shown when i click on the show detail button:
C:\Windows\Minidump\mini020604-03.dmp
C:\Documen~\1Longsh~\Locals~\temp\wer1.tmp.dir00\sysdata.xml
I am at my wits end all bios and drivers are up to date but the system just keeps crashing I am about to throw this board away and waste another £80 that I dont really have please Help me PLease Please Please

Did you try troubleshooting the system as I posted earlier? Also try uninstalling Norton and see what happens...you couldn't pay me to put that on my system...it's so intrusive into your system's registry who knows what havoc could be happening...
AVG 6.0 Free Edition or AVG 7.0 Pro version are great virus scanners...much less intrusive to the system and I've fixed many a system sporting good ole' Norton on em that let worms, viruses & trojans through...Had one machine with Norton on it, uninstalled it, installed AVG 6.0 Free Edition and found 146 instances of viruses, worms & trojans...
I never laughed so hard in my life...if you could just have seen my clients face that day...LOL
It's a driver or registry error of some sort so doing a clean install and a careful reinstall of your programs and such should get you fixed up I imagine...
Bonz

My second KT6 Delta FIS2R, problems again..

I had FIS2R with couple of problems: I didn't start after pressing power on -button. All diagnostic leds were red (processor damaged). After pressing reset computer booted up nicely. This problem was from beginning, later (after half year(?) usage) came stability-problems. System became very unstable. Even when all memory and cpu-speeds were as low as possible, there were problems: Windows hanging, prime gave error etc.
So I got RMA-code and returned it. Board I got back was same model, same revision. It just worked fine, no problems at all. But now there is also that "won't start" -problem sometimes (with diagnostic leds turned red). I tried to run prime95 torture test after first time computer didn't start without preset and it was running errorfree. Now after about month later, prime95 ran only 1h 52min.
Anybody else having same problems?
Is there many revisions of that board, perhaps newer?
System:
KT6 Delta FIS2R
XP 2500+
512Mb M-TEC 400MHz
Club 3D Radeon 8500
360W PSU
Samsung SATA-Drive

I don't think there is a problem with hard disks, same problem was with Seagate only and with Samsung only. Now with this new board, these hangings on startup happens so randomly, that I'm willing to believe that my PSU can't give enough power.
Those stability issues were probably caused overheated NorthBridge. It was too hot to touch. I changed bigger fan to CPU -heatsink and now it also blows to NB and it's much cooler. Prime95 has been running 12 hours no with no errors. Gotta see and hope it runs errorfree for next 12 hours too.
Maybe I was just scared because last FIS2R became so unstable that even if I put all setting as (s)low as possible, it wouldn't work.
Windows is just fine, I made fresh install couple of week ago and I don't have net at home so it should be quite clean..
Thank's to all of you, at least I know now to try replace PSU if there is problems..

MSI KT6 DELTA FIS2R problems

Well, I finally received my new KT6 DELTA FIS2R motherboard (I replaced my K7N2 Delta ILSR). After getting the wrong model and one with missing parts... I think I received a defective one! I tried to format and make a new installation of Win Xp. While it tried to make its first boot, the thing crashed and it would not reboot. I tried resetting the BIOS and then i got the message: CMOS corrupted or damaged. (The diagnostic led indicated the same thing). I experienced another problem, while I was using my computer, the CPU was running at 60C, in windows! (before reinstalling). Does anybody has the same problems with their KT6 boards... Does it need to be returned?
Thanks for the help,
Valkyr

From your post its not totally clear where you are at. Does the system still POST?
First of all, it is normal to get some kind of error message the first time after clearing cmos. Entering bios or hitting the key for "load defaults" will make that go away. If you do that and errors still happen in bios then you have more serious problems.
As far as the temp goes, redo the cpu installation making sure you totally remove all the old thermal pad/compound and use proper amount of new stuff.

Another K7N2 Delta reset issue

After having a good look through the forum today I believe this will be an all too familiar issue.
Recently purchased K7N2 Delta (not the ILSR) along with XP 2500 Barton and 512mb PC3200 Kingston RAM. Put all of the kit together with no real problems (apart from the frightening ammount of pressure I had to apply to the Aero 7 screwdriver clip to get it to lock onto the mount). Installed Windows XP Pro SP1 with no problems installed all of the updated drivers with the MSI update util and installed the most recent certified driver for the vid card from Nvidia homepage.
PC booted OK changed FSB to 166 in order to recognise the XP2500 installed MSI CPU monitoring software. CPU temp in BIOS around 38C, and from software approx 40C (idle). All looked great!
However, I then installed No One Lives Forever 2 set all the details to high (OK on my old PIII 700) and when I attepmted to run the game PC reset itself (as if the reset button has been pressed). Tried it again on low detail setting the game ran for a bit longer (approx 1 min) and then reset again.
An error is reported in the Event log (event ID 1003 source system error) I have checked this on Technet and it appears to be a generic hardware error.
So I think it may be 1 of 3 things.
1. Cr@p PSU (I will add the details below)
2. Dodgy/incompatible memory (I have heard that the Kingston can be a bit hit and miss with this chipset.
3. Overheating CPU. I was a little bit stingy when applying the Coolermaster Premium Thermal paste, but all of the monitors a reporting that the CPU is relatively cool.
Details of the PSU are as follows..
Eagle 350W. Mod DR-b350ATX (supplied with case)
+3.3v - 28a
+5v - 35a
+12v - 16a
-5v - 0.3a - 1.5w
-12v - 0.8a - 9.6w
+5vsb - 2a - 10w
I am leaning towards a weedy PSU but some advice would be great! Thankyou for your time.
IllPhil.

Right. Ive just checked the cooler and it appears to be mounted the right way round (clip on the outside of the Motherboard and looks flush with the cpu).
I did however change the FSB/DRAM ratio from By SPD to 1:1 and this appears to have done the trick. POST now reports 'DRAM clock for DDR 333' and NOLF2 loaded with highest detail settings and played without a hitch for about 1/2 hour. Also tested OK with BurnTest and 3dMark2003 (p!ss poor score of 1699 though but ill have to tinker with the driver and maybe overclock a bit to get that up). So it looks like you hit the nail on the head their Wonk. Could you recommend some stress testing software I could try so I can give it a good soak test?
Oh and I almost forgot the PSU combined wattage figures are 200w, 192w and 330w.
Thanks again.
IllPhil

K7N2 Delta Sata problem

I know this has been posted plenty of times before but the fixes for those do not seem to be working.
Im running a K7N2 Delta ILSR and have bought myself a Hitachi T7K250 250GB sata2 drive but am having real problems installing it.
I want to run my trusty Win2K
I have done the CTRL - F in bios thing and set my drive as a striped raid, after which i reset and the post states i have a functional drive.
So i boot from my Win2K CD and hit F6 when prompted to do so and insert my driver floppy, i install both the Raid and Storage drivers but when i get to the actual Windows set up it states it cant find a hard disk.
I have tried the SATA drivers from the MSI website, and NVIDIA and am wondering if the promise drivers would be more sucessful.
Does anyone else have any suggestion of what to do next?

I have created and also replied to several posts on a very similar issue. The Delta2 version will NOT work with some SATA II drives. I have found NO fix for this and I have spent a lot of hours on it.
As Stu points out, the two boards have different controller chipsets, but I would guess them to have the same problem. Also, my experience is with Maxtor brand drives. Different products, but likely the same issue.
Try a SATA I drive to test. My experience with jumpering a SATAII drive into SATAI mode resulted in total failure.

Msi k7n2 delta ilsr problem

hi i have this configuration on my pc:
antec true control 550 watts
msi k7n2 delta ilsr
kingston hyper x pc3700 2x512 mb
athlon xp 3200+
seagate 120 gb sata 7200.7 hd
ati radeon 9800 pro excalibur ice q
i have 2 problems : the first one is that sometimes windows display me a blue screen with certain problem related to ati2dg.dll i think that problem is beacause the video card so i decided to update the bios , in the live update page from msi says that the bios 7.6 fix a bug with ati vga cards but after flashing and updating to bios v7.6 that blue screen with the same error still appearing so i dont know what else to do to solve the problem and the second one is that when i start any game or make the processor to work a little mostly related with video stuff the case speaker start to beep and the pc lags until he restarts with no reason i really dont know why if u can help me thank you

Foxtrotccs,
In the BIOS try setting the AGP to 4X and disable Sidebanding. Then set the AGP Apeture to 256. See if that helps.
Make sure you are running the lastest nVidia nForce Drivers and the latest ATI Catalyst Drivers
Take Care,
Richard
P.S. There is still a possibility that the Kingston RAM is the problem.

IPod mini Battery & Reset Problems - So Annoying!

Hi Everyone!
My first post and it's a problem!
I bought the second generation iPod mini back at the very end of February this year. I love it to bits and i've used it every single day since i got it! I charge it whenever i need to (mostly every other day!).
But recently in the last 3/4 weeks its started to play up. It now resets itself at least 2/3 times a day and has started to become really annoying. The iPod will now no-longer charge fully at all, and it's says the battery's dead, and then it'll grow again! The battery symbol and the battery text will also come up frequently!
This is really starting to get on my nerves!
What can i do, i've only had it for nearly 8 months!
Please help and offer any suggestions!
Rich!

Hi Richard,
Sounds like you're having the same problem as me (I posted in a seperate post same time as you!!)
Hope someone can help us out, can't face having to send mine to Apple to be fixed and be without it for a week or two!!!
Jordan

Major 30G Photo Skipping/Stopping/Reset Problems

*I originally posted this under "5th Generation" which I think was a mistake, so I'm posting it here.*
Hi all. I'll try to give the short version of my major iPod problems I've been having. It's been going on for a couple months straight now.
The first thing that started happening was, in the middle of playing a song, it would freeze, and then start skipping through of the rest of the tracks on that playlist or album. It would sometimes make a "whirring" sound when going from track to track without playing them. Sometimes, this process would start instead when trying to manually skip from one song to another...it would just start to skip through tracks. It had to be restarted a bunch of times, and none of these problems had been present in the 2 or so years previous I owned it. Eventually, it showed an "unhappy face" and nothing else could be done.
I brought it back to Best Buy, where I bought it, as it was still under warranty for another year. They sent the iPod back to Apple for repairs. The "repaired" iPod was back in my hands in about 3 weeks, and for a week or so worked perfectly. Then, it started having the skipping tracks problem again.
Not long there after, it started having more serious problems. It needed to be resetted very frequently. The skipping of tracks, the first warning sign, became the least of it's problems. It needed to be completely restored. The first time it was restored, it got through about 600-1000 of the 5800 songs on it, then stopped and said the restore failed.
Other times, it showed the dreaded "1418" message. Other times it had messages like these:
Attempting to copy to the disk “Andrew’s iPod” failed. An unknown error occurred (-69).
The iPod “Andrew’s iPod” cannot be synced. The disk could not be read from or written to.
The iPod “Andrew’s iPod” cannot be synced. The required file cannot be found.
Eventually, it synced correctly. But the problems continued, and over the course of two weeks it had to be completely restored about 3 or 4 times, although it would then work again perfectly fine for, like, an hour.
So I took it back in again. This time, Best Buy told me that I would be quickly sent back a "Refurb" unit (a refurbished iPod that someone else had returned, I guess and had then been fixed or what have you.)
After a few days, I got the refurb unit. It's not my old iPod, I could tell just by looking at the front and back. And, for about 2 weeks, it worked absolutely perfectly. It reloaded like a charm, and played completely fine. The battery life seemed a little iffy, but nothing crazy.
Then, yesterday, this iPod that *is not* the same iPod I returned as far as I can tell, is having THE EXACT SAME PROBLEM. Yesterday, in the middle of a song that I had played many times before, it froze, stopped, and started skipping songs. It needed to be reset, what else is new. So, I did, and got the "unhappy face" with the address of iPod support once again.
I'm really confused. What is the problem here? When I had my first unit returned, I figured perhaps the problem hadn't been addressed. But this doesn't even appear to be the same unit.
Could there be a problem with iTunes 7.1.1 with my iPod? For what it's worth, I followed the advice found online to try to find corrupted music files, and can't find any. When it had restore problems with the last unit, I checked to see if it was stopping on any particular song, and it was different every time. Even so, I erased those songs just in case.
Also, when it freezes and stops now (and with the old unit, for that matter) it was never the same song. And it was almost always on a song that had already been played many times, perfectly fine, many times before, and recently to boot. I've also played through almost every song through iTunes over the last couple months to check for any obvious problems, and never found any.
With over 5750 songs on my iPod, I don't know how I can possibly know with complete certainty if there's anything with a problem amongst them, although completely erasing my iPod library that until 2 months ago never had a problem is kind of a worst case scenario.
What on earth could be wrong with my iPod? It's currently plugged into an outlet, vacillating between the Apple symbol and the "unhappy face." Anyone have ANY ideas?!?!?

Okay, my last word on the subject:
Please do not take this as any sort of real advice or a long term solution, as it almost certainly will not be based on my past experiences with this thing.
But, as I was preparing to go to bed and head out the door to Best Buy tomorrow, so that they could for the 3rd time in a month and a half "fix" my iPod or give me a "refurb unit," I tried one last terrible thing.
As I said above, it vacillated between the apple icon (unlit) and the sad-faced iPod when plugged into the wall, and the old fashioned lightning/battery when plugged into the computer. The computer didn't recognize it, iPod didn't recognizing it. Resetting did nothing. Restore was impossible. The original problem was, as had kept happening throughout this process, it would play some random song and then stop and start skipping through tracks, or it would simply skip through tracks when I tried to move manually from one song to another.
I'm so fed up with this thing after having it "fixed" several times in the last month, and even sort-of replaced, I did the thing some people suggest for you to do as a last resort.
I picked up the iPod, turned it over in my hand so the metallic side was facing out, and gave it one good, hard slap.
And now it works. I plugged it back into the computer, and it was fine and raring to go. All my files were there like nothing ever happened. It's playing right now.
What in the world is wrong with this thing when a SLAP "fixes" it, and absolutely nothing else will.
I don't get this thing, I tell ya.

IPod and JVC Car Stereo random resetting problem

Hey all,
I recently bought my first iPod (yay!), a 30gig 5th generation. I also had a JVC KD-PDR30 cd player installed in my car so that I could hook up the iPod to it and eliminate all the random cds cluttering up my vehicle. It works great -- most of the time... the last few days I've my iPod has been randomly resetting itself while connected to the car stereo -- it's connected through the dock port (not the headphone jack) and works 90% of the time. Even still, this is frustrating. I almost want to just connect it from the headphone jack to the aux in on the car stereo. Anyway, it only seems to do this while it is connected to the car stereo. I've never had a problem with the iPod resetting while using it outside of the car. Anyone have any suggestions? Thanks Apple community!!!
Theo

I had the JVC radio with iPod connector which worked just fine for my old iPod. When I upgraded to the iTouch I had to put in a new JVC stereo. The old version does not work with the iTouch (the same issues prev. stated). The new stereo has an USB hookup on the front. It plays the iTouch, but occas. the song or book will skip. At first I thought it was when I turned corners, but realized it was just random. A bit annoying. I looked at other stereos, but I could not get the iTouch and Sirus in the same unit, except for the JVC. If you can live without your iTouch I would wait until JVC or Apple address this issue. I could not live without either (I hate commercials!), so I made the jump to the first generation. I know better.

Scenarion of Delta Load problem in COPA Extraction

Please get me the solution for this particular scenario.
Let us suppose that i created the datasource some 1 year back and running the deltas successfully since then.
Let us number the requests from 1,2,3... and so on since 1st jan 2009. And let us suppose each request loads
some 1000 records everyday from ECC to BI.
Now on 10th august some change was made to ECC( such as change in the User Exit ) that caused the mismatch in number of data records ( loading only 950 records ) since the change was made on 10th August. But I identified the problem on 17th august with request number 160. Let us say those request numbers are 153(10th),154(11th),155(12th),156(13th),157(14th),158(15th),159(16th),160(17th). I fixed the program in ECC on 17th and further the requests from request number 160(17th) are fetching the correct number of data records. Now I need to delete the data in BI for request numbers 153 till 159 since they are not reconciling the data of ECC with BI. Now we reload the deltas for such requests from ECC to BI. So how do I reload the deltas now in this scenario since ECC system keeps track of the last delta ie.. on 17th august(Req no 160). But how do I Load the deltas from req number 153 to 159 from ECC to BI.
One proposed solution to this problem was setting the timestamp of COPA to 10th august. But it is not advised to set the timestamp for COPA datasources using the KEB5 transaction in a production system.
Now in this scenario how do I load the request numbers 153 to 159 from ECC to Bi to fetch the correct data records for that period. Please propose a solution for this problem ASAP. U can also call me back whenever u need.
Thanks in advance

As stated in a previous post...
How you choose to do this can be summed up by the question: Does the target for this data have cumulative or non-cumulative Key Figures?
If you are doing an overwrite to the Key Figures, you could just execute a Full Repair InfoPackage that extracts the data for the days that you found inconsistencies instead of attempting to change the timestamp in KEB5 on the source ECC environment.
However, if you're target has cumulative Key Figures you're left with very few options (a couple of them are time-consuming):
1) Changing the timestamp in KEB5, if your plug-in is PI 2003.1 or older. Newer versions of the plug-in do not allow the changing of the timestamp as was pointed out by Ferruccio earlier.
2) Deleting the keys in the target InfoProvider for those records that you extract in a Full Repair extract.
3) Delete all data in BW for COPA and start from the beginning. This may be your best bet for cleaning up the issues in this scenario.

Zpca_c03, delta reset problem

Similar Messages

Maybe you are looking for