Zpool import issue

Hello.
I have two Solaris 10 servers (release 10/09). The first one is a Sun M4000 Server with SPARC technology. The other one is a Sun Fire X4170 with x86 Intel architecture. Both servers are attached via SAN to the same EMC Storage system. The disks from the M4000 Server are cloned every night with the EMC Storage. After cloning the clone disks are made visible to the X4170. When I try to import the Pool on the X4170 with
zpool import -f sn2500-log
I get the following error message: *invalid vdev configuration*. But there is no problem when I try to import the same clone on an other SPARC server. Are there ZFS compatibility problems between x86 and SPARC architecture? There are differences when I compare the VTOC of the clone disk on the x86 and the source disk on the SPARC server. When I compare the VTOC of the clone disk on an other SPARC server and the source disk there are no differences.
I get the following informations from the X4170.
[ sn2300 ]# zpool import
Pool: sn2500-log
ID: 11306365569725552770
Status: UNAVAIL
Status: Auf den Pool wurde zuletzt von einem anderen System zugegriffen.
Aktion: Der Pool kann aufgrund von beschädigten Geräten oder Daten nicht importiert werden.
Siehe: http://www.sun.com/msg/ZFS-8000-EY
config:
sn2500-log UNAVAIL Nicht genügend Replikationen
c4t600601608D642400023BC3A7C151DE11d0s2 UNAVAIL Beschädigte Daten
c4t600601608D642400033BC3A7C151DE11d0s2 UNAVAIL Beschädigte Daten
[ sn2300 ]# zpool import -f sn2500-log
cannot import 'sn2500-log': invalid vdev configuration
[ sn2300 ]# zdb -l /dev/dsk/c4t600601608D642400023BC3A7C151DE11d0s2
LABEL 0
version=15
name='sn2500-log'
state=0
txg=4
pool_guid=11306365569725552770
hostid=2238641978
hostname='cn0060'
top_guid=13726396776693410521
guid=13726396776693410521
vdev_tree
type='disk'
id=0
guid=13726396776693410521
path='/dev/dsk/c5t600601608D642400B78DD7589A5DDF11d0s2'
devid='id1,ssd@n600601608d642400b78dd7589a5ddf11/c'
phys_path='/scsi_vhci/ssd@g600601608d642400b78dd7589a5ddf11:c'
whole_disk=0
metaslab_array=26
metaslab_shift=23
ashift=9
asize=1605632000
is_log=0
LABEL 1
version=15
name='sn2500-log'
state=0
txg=4
pool_guid=11306365569725552770
hostid=2238641978
hostname='cn0060'
top_guid=13726396776693410521
guid=13726396776693410521
vdev_tree
type='disk'
id=0
guid=13726396776693410521
path='/dev/dsk/c5t600601608D642400B78DD7589A5DDF11d0s2'
devid='id1,ssd@n600601608d642400b78dd7589a5ddf11/c'
phys_path='/scsi_vhci/ssd@g600601608d642400b78dd7589a5ddf11:c'
whole_disk=0
metaslab_array=26
metaslab_shift=23
ashift=9
asize=1605632000
is_log=0
LABEL 2
failed to unpack label 2
LABEL 3
failed to unpack label 3
Thank you
Robert

robert.cohen wrote:
Well, ZFS is advertised as being endian independant.
But maybe the partition tables aren't.
You might have better luck with the question on the opensolaris boards.They should be.
http://www.informit.com/articles/article.aspx?p=712746
I agree on the opensolaris boards.
alan

Similar Messages

Zpool import error

I'm having some slight difficulty importing a pool. I swapped motherboards for an upgrade and the new board didn't have a raid controller so I popped in an LSI 9211-8i I had on the shelf. Previously I was relying on an onboard LSI 1068E chipset
Now If i put the drives back on the old board, I can re-import this pool over and over again, but on the new controller, I get the following...
root@srv-data:~# zpool import
pool: tank
    id: 13082910964082835666
state: UNAVAIL
status: One or more devices are unavailable.
action: The pool cannot be imported due to unavailable devices or data.
config:
        tank                          UNAVAIL insufficient replicas
          raidz2-0                    UNAVAIL insufficient replicas
            c16t50014EE6033BDE95d0p0 UNAVAIL cannot open
            c14t50014EE25D701F04d0p0 UNAVAIL cannot open
            c13t50014EE603438DD4d0p0 UNAVAIL cannot open
            c12t50014EE2081AF42Ad0p0 UNAVAIL cannot open
            c11t50014EE60334E385d0p0 ONLINE
            c10t50014EE2081DE6E0d0p0 ONLINE
device details:
        c16t50014EE6033BDE95d0p0    UNAVAIL       cannot open
        status: ZFS detected errors on this device.
                The device was missing.
        c14t50014EE25D701F04d0p0    UNAVAIL       cannot open
        status: ZFS detected errors on this device.
                The device was missing.
        c13t50014EE603438DD4d0p0    UNAVAIL       cannot open
        status: ZFS detected errors on this device.
                The device was missing.
        c12t50014EE2081AF42Ad0p0    UNAVAIL       cannot open
        status: ZFS detected errors on this device.
                The device was missing.
I've been digging for hours now and at first I thought the controller was bad, but now I'm not so sure. I did find some information about multipathing but I'm not sure how relevant it is. From the following doc it looks like the drive names I'm seeing indicate that multipath is enabled and I don't think it was supported by the old controller.
http://docs.oracle.com/cd/E19253-01/820-1931/gfpwh/index.html
I tried turning it off as per the following doc, but either I did something wrong or that's not my problem
http://docs.oracle.com/cd/E19253-01/820-1931/6ndinfi7t/index.html
I really could use a hand here, if this is a configuration issue, it's at least a little beyond my knowledge
I should probably mention that the drives seem to be detected otherwise if I run format for example
root@srv-data:~# format
Searching for disks...done
c12t50014EE2081AF42Ad0: configured with capacity of 2794.52GB
c13t50014EE603438DD4d0: configured with capacity of 2794.52GB
c14t50014EE25D701F04d0: configured with capacity of 2794.52GB
c16t50014EE6033BDE95d0: configured with capacity of 2794.52GB
AVAILABLE DISK SELECTIONS:
       0. c8t0d0 <VMware-Virtual disk-1.0-24.00GB>
          /pci@0,0/pci15ad,1976@10/sd@0,0
       1. c10t50014EE2081DE6E0d0 <ATA-WDC WD30EFRX-68A-0A80-2.73TB>
          /pci@0,0/pci15ad,7a0@15/pci1000,3020@0/iport@4/disk@w50014ee2081de6e0,0
       2. c11t50014EE60334E385d0 <ATA-WDC WD30EFRX-68A-0A80-2.73TB>
          /pci@0,0/pci15ad,7a0@15/pci1000,3020@0/iport@8/disk@w50014ee60334e385,0
       3. c12t50014EE2081AF42Ad0 <ATA-WDC WD30EFRX-68A-0A80-2.73TB>
          /pci@0,0/pci15ad,7a0@15/pci1000,3020@0/iport@10/disk@w50014ee2081af42a,0
       4. c13t50014EE603438DD4d0 <ATA-WDC WD30EFRX-68A-0A80-2.73TB>
          /pci@0,0/pci15ad,7a0@15/pci1000,3020@0/iport@20/disk@w50014ee603438dd4,0
       5. c14t50014EE25D701F04d0 <ATA-WDC WD30EFRX-68A-0A80-2.73TB>
          /pci@0,0/pci15ad,7a0@15/pci1000,3020@0/iport@80/disk@w50014ee25d701f04,0
       6. c16t50014EE6033BDE95d0 <ATA-WDC WD30EFRX-68A-0A80-2.73TB>
          /pci@0,0/pci15ad,7a0@15/pci1000,3020@0/iport@40/disk@w50014ee6033bde95,0
Specify disk (enter its number): ^C
or dmesg shows them
root@srv-data:~# dmesg | grep scsi
Sep 11 22:31:06 srv-data scsi: [ID 583861 kern.info] sd44 at mpt_sas3: unit-address w50014ee2081af42a,0: w50014ee2081af42a,0
Sep 11 22:31:06 srv-data scsi: [ID 583861 kern.info] sd42 at mpt_sas1: unit-address w50014ee2081de6e0,0: w50014ee2081de6e0,0
Sep 11 22:31:07 srv-data scsi: [ID 583861 kern.info] sd40 at mpt_sas5: unit-address w50014ee25d701f04,0: w50014ee25d701f04,0
Sep 11 22:31:07 srv-data scsi: [ID 583861 kern.info] sd43 at mpt_sas2: unit-address w50014ee60334e385,0: w50014ee60334e385,0
Sep 11 22:31:07 srv-data scsi: [ID 583861 kern.info] sd39 at mpt_sas4: unit-address w50014ee603438dd4,0: w50014ee603438dd4,0
Sep 11 22:31:07 srv-data scsi: [ID 583861 kern.info] sd41 at mpt_sas7: unit-address w50014ee6033bde95,0: w50014ee6033bde95,0
I'm just trying to figure out if it's a software issues or if maybe it's just the controller that's bad

Hi.
Messages like:
c12t50014EE2081AF42Ad0: configured with capacity of 2794.52GB
c13t50014EE603438DD4d0: configured with capacity of 2794.52GB
c14t50014EE25D701F04d0: configured with capacity of 2794.52GB
c16t50014EE6033BDE95d0: configured with capacity of 2794.52GB
Say that this disks don't have correct label ( like partition table).
You can try see partition on another disks and make same on this disks.
But not clear what cause lost this information and what loast more .
Regards.

Strange import issue .. no longer works in 2.6 or Beta 3

Strange import issue.
I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
I am stumped any ideas?

Thank you for everyone's assistance
I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

Okay, still trying to get my import issue resolved.
I have a SONY HDR-HC3 DVmini.
No problems with iMovie 3 on my Powerbook.
iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
My buddy thinks it might be a Quicktime issue.
He said to download Quicktime Pro, that might resolve this issue.
I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
THANX

Hi
Can be so much.
Often Camera has to be connected to Charger/mains during Capture.
An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
My list on this
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Import issue with Lightroom

I upgraded to LR5.2 2 weeks ago from 4.3. Install went fine, but I'm now having issues when importing my photos, Lightroom hangs partially through the import. The only choice I have then is to force quit the program, which then freezes my computer. Getting to be an invredibly frustrating exercise.
I have an iMac with OSX10.8.5 (Mountain Lion)
Lightroom 5.2
Importing & converting CR2 files (5DMkIII) to DNG.
Images being imported to an external hard drive.
Nothing has changed in my workflow or software except for the installation of LR5. I did read in some of the forums that there was import issues that appear to have been fixed with the latest release, however, whilst I DEFINTIELY have the latest release of LR5, this is still occurring. Any ideas? Another bug?
Cheers
Sarah

sure did. All permissions are admin & I'm it. I haven't tried DL via image capture - LR4 gets me to the same end goal, tis just rather onerous to have to muck around with this twice. Appreciate your taking the time on this

Duplicate Video Import Issue

Hello,
I am running PPRO CS6 (6.0.3) on Windows Vista
I am having a duplicate asset import issue. Let me explain...
I have a couple of Premiere Pro project files with multiple sequences in each. In each of the project files I have the same source video files imported as the some of the sequences in each of the project files reference the same source video file.
So here it was is happening...I have a project file with sequences 001-025 in them and I have have another project file with sequences 026-050. I have 25 sequences per project to keep the project sizes smaller and more manageable so my system doesn't choke.
Sequences 014 and 015 in the first project file both reference "Video01.avi" which is located on my external F: drive. I want to import sequences 027-030 from the second project file which both reference the same "Video01.avi" file on the same drive.
I know PPro is intelligent enough to know when importing assets from another project file that shares the same assets as the project you are importing into, it knows to only import the dependent assets which are not in the project file you are importing into. I have done this countless times and PPro has correctly only imported the assets it needed.
However for some reason when I am trying to import the above mentioned sequences from one project into another it is bringing in a duplicate copy of the source footage necessarily. I can't figure out why it is doing this. The sequences it is importing both reference the identical file on the same drive, etc. And I am using the "Import Selected Sequences" option.
Thank you,
Shane

I think I have solved my own issue. As stated above when I was trying to import sequences from another sequence it was brining in a dup copy of the same clip in the sequence. I was able to successfully have it not do that.
What I realized was happening is that even though the source footage video file is identical in each project file, when I opened it up the clip in the source monitor I had different IO points set for each version of the clip in each project. PPro I am assuming imported the second copy to preserve the IO points on the second version of the clip that was being imported.
I simply cleared each set of IO points on each reference of the clip in the project file and I was able to import the sequences I wanted without bringing in an additional copy of the source clip. So now I just have one copy of "Video1.avi" in my project file instead of multiple.
Hope this helps someone in the future who may be experiencing a similar issue.
Shane

Zpool import on SAN not working

I have a zfs pool on a SAN disk that I flashcopied to another SAN disk
when I try to import the flashcopied LUN onto another server I get this
velma@/opt/IBMsdd/bin>zpool import -f
pool: testlun
id: 3386973188287377652
state: FAULTED
status: One or more devices are missing from the system.
action: The pool cannot be imported. Attach the missing
devices and try again.
see: http://www.sun.com/msg/ZFS-8000-3C
config:
testlun UNAVAIL insufficient replicas
vpath38g UNAVAIL cannot open
If I try to mount the lun it says it's "not fstype"
Any ideas?
We flashcopy production luns to other luns and then backup the falshcopied luns to save on downtime

[email protected] wrote:
There is only one Windows Account on my PC. This account is the Administrator account so it should work.
Wrong!
See my last post in this thread:
Re: Not able to start Oracle 10g Listener on Windows 2008 Server
there I explained a little bit UAC and how to deal with it.
Cheers!

Zpool import help

Hi,
I need to import a zpool but it does not show any pool:
# zpool import
no pools available to importAnd when I try zpool status:
# zpool status
pool: raid
state: UNAVAIL
status: One or more devices could not be opened. There are insufficient
        replicas for the pool to continue functioning.
action: Attach the missing device and online it using 'zpool online'.
   see: http://www.sun.com/msg/ZFS-8000-D3
scrub: none requested
config:
        NAME        STATE     READ WRITE CKSUM
        raid        UNAVAIL      0     0     0 insufficient replicas
          c2t0d0    UNAVAIL      0     0     0 cannot openWhat does it mean UNAVAILABLE ? If I try the "format" command it shows all the drives which are available:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c0t5d0 <DEFAULT cyl 2548 alt 2 hd 255 sec 63>
          /pci@0,0/pci8086,244e@1e/pci103c,3228@0/sd@5,0
       1. c2t0d0 <LSI-MegaRAID 8888ELP-1.10-5.45TB>
          /pci@0,0/pci8086,2779@1/pci1000,1006@0/sd@0,0
       2. c2t1d0 <LSI-MegaRAID 8888ELP-1.10-2.04TB>
          /pci@0,0/pci8086,2779@1/pci1000,1006@0/sd@1,0
Specify disk (enter its number): ^CHow should I import this zpool ? I also try to bring the pool online:
# zpool online raid0 c2t0d0
cannot open 'raid0': pool is unavailableI also check the disk with:
# zdb -l /dev/dsk/c2t0d0s0
LABEL 0
    version=4
    name='raid'
    state=0
    txg=4
    pool_guid=8739907486845981885
    top_guid=12531544435228395821
    guid=12531544435228395821
    vdev_tree
        type='disk'
        id=0
        guid=12531544435228395821
        path='/dev/dsk/c2t0d0s0'
        devid='id1,sd@n600605b0005ee7400f214e291d756eac/a'
        whole_disk=1
        metaslab_array=14
        metaslab_shift=35
        ashift=9
        asize=5991986102272
LABEL 1
    version=4
    name='raid'
    state=0
    txg=4
    pool_guid=8739907486845981885
    top_guid=12531544435228395821
    guid=12531544435228395821
    vdev_tree
        type='disk'
        id=0
        guid=12531544435228395821
        path='/dev/dsk/c2t0d0s0'
        devid='id1,sd@n600605b0005ee7400f214e291d756eac/a'
        whole_disk=1
        metaslab_array=14
        metaslab_shift=35
        ashift=9
        asize=5991986102272
LABEL 2
    version=4
    name='raid'
    state=0
    txg=4
    pool_guid=8739907486845981885
    top_guid=12531544435228395821
    guid=12531544435228395821
    vdev_tree
        type='disk'
        id=0
        guid=12531544435228395821
        path='/dev/dsk/c2t0d0s0'
        devid='id1,sd@n600605b0005ee7400f214e291d756eac/a'
        whole_disk=1
        metaslab_array=14
        metaslab_shift=35
        ashift=9
        asize=5991986102272
LABEL 3
    version=4
    name='raid'
    state=0
    txg=4
    pool_guid=8739907486845981885
    top_guid=12531544435228395821
    guid=12531544435228395821
    vdev_tree
        type='disk'
        id=0
        guid=12531544435228395821
        path='/dev/dsk/c2t0d0s0'
        devid='id1,sd@n600605b0005ee7400f214e291d756eac/a'
        whole_disk=1
        metaslab_array=14
        metaslab_shift=35
        ashift=9
        asize=5991986102272Please any help or advice will be great.
Thank you.
Edited by: narrok on Feb 27, 2008 6:25 AM

I then finally use:
# zpool export raidAnd then I just import it and reboot.
Thank you!.

Import issues, Audio/video Unsynced

Having major import issues, audio and video won't play in sync. Working with MP4 and MXF on most recent version of Premiere CC. Everything plays fine in quicktime/vlc but goest haywire in premiere. Have been through tech support twice, updated drivers, cleared cache and Premiere still has trouble playing back video/audio in sync. Any idea what's going one? Our company recently switched to adobe for the supposed "ease" it handles different codecs and so far have had nothing but issues? Sorry if this is already addressed in one of the forms, am at my witts end now having lost multiple days trying to troubleshoot premiere.

Hi Adobe4,
Having major import issues, audio and video won't play in sync. Working with MP4 and MXF on most recent version of Premiere CC.
Sorry for this issue. Tell me, where did these files originate? From a video camera? Do they have a constant frame rate or a variable frame rate?
Thanks,
Kevin

DTW-- How to Import Issue for Production

Hi ,
How do i import Issue for Production Through DTW.
Thanks & Regards
somi mishra

hello,
why do you want to use DTW to issue for production ? You could use backflush as issue method so that you can skip issue for production job. If you have issue for production batch job which it means you want to add all the qty of RM issued to production one times and all at onces for more than 10 PO, I think it is better to use addon. You create an excel template and export the data to be txt file, the txt file imported to the issue for production form using the addon. I just compare this situation with the client request in long time ago. they request fast and not manual sales order creation from quotation. just to compare it to your situation but need your detail explanation.
Rgds,

Freeze after "zpool import pool0001"

Hello everybody!
I have:
nfl-node1# zpool import
pool: zfs0003
    id: 4208238570568469453
state: ONLINE
status: The pool was last accessed by another system.
action: The pool can be imported using its name or numeric identifier and
        the '-f' flag.
   see: http://www.sun.com/msg/ZFS-8000-EY
config:
        zfs0003                                  ONLINE
          c5t60060480000290102925533030303842d0 ONLINE
pool: zfs0001
    id: 14174836934338567856
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
        zfs0001                                  ONLINE
          c5t60060480000290102925533030303733d0 ONLINE
pool: zfs0002
    id: 15832128878269706808
state: ONLINE
status: The pool was last accessed by another system.
action: The pool can be imported using its name or numeric identifier and
        the '-f' flag.
   see: http://www.sun.com/msg/ZFS-8000-EY
config:
        zfs0002                                  ONLINE
          c5t60060480000290102925533030303833d0 ONLINE
nfl-node1#If I try import zfs pool zfs0002 - is OK. Pool is imported.
But if I try import zfs pool zfs0001, then zpool command is freezing!
And I can't import zfs pool! :-(
nfl-node1# zpool import zfs0001
or
nfl-node1# zpool import -f zfs0001That all. After only freezing...
Others ZFS pool in working fine.
What can I do for check ZFS pool on I/O error?
Any workarounds?
How can I import ZFS pool?
P.S. I have no backups... :-(
Thanks a lot!

Try checking the version #'s (doubtful) or better yet would be to use zpool scrub if you can.
alan

Help me, oh great Toonz! (Slow import issue - # bazillion!)

Toonz you seem to be the most knowledgeable about this slow import issue.
I am trying to import from music CDs to a brand new, out-of-the-box, Maxtor External Hard Drive (usb 2.0). Currently I have a Dell Dimension XPS T500 Pentium3 w 512MB Ram and also a newly installed Sony 52x optical drive. Yet I still suffer from import rates of 3.0 or less.
Here is my CD Diagnostic from iTunes (which is hogging my CPU, btw).
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation XPST500
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9200 PRO Family (Microsoft Corporation)\RADEON 9200 PRO Family (Microsoft Corporation
IDE\DiskWDCAC29100D___________________________J74OA30K, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD200BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskMaxtor6L200R0_________BAH4, Bus Type USB
IDE\CdRomSONYCD-RW__CRX320EE____________________RYK3___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: SONY CD-RW CRX320EE, Rev RYK3
Audio CD in drive.
Found 6 songs on CD, playing time 66:34 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 19:49:35
Track 3, start time 26:25:28
Track 4, start time 37:23:48
Track 5, start time 48:29:23
Track 6, start time 57:47:15
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 52.
The drive CDRW speeds are: 52.
Help me Obi-wan Kenobi, your my only hope!
Thanks.
Windows XP

See if Slow Imports can help.
Good luck.

Fixed Asset Importation Issue (Capitalisation Date)

Hello experts,
I have an issue regarding fixed asset importation.
I've import the fixed asset master data correctly in the system, with it's correct capitalisation date, APC, depreciation cumulative value and everything else correctly in the master data. Under Administration --> Data Import/Export --> Data Import --> Import Fixed Asset Master Data from Microsoft Excel.
However, where the issue is, it's now on the fixed asset history sheet, where the capitalisation date, is defined as the first date of the fiscal year "01/01/2014". Where by none of these assets were purchased on that date. But everything else on the report is correct except the capitalisation date.
Due to this issue, it is hard to explain how an asset was purchased on 01/01/2014, which have a use full life of 4 years, has depreciate completely in 2015. But if I check in its master data, I find out the capitalisation date is like in 6 years ego.
Note: I'm using SAP Business One 9.0 PL11
Any suggestion, comment or help is highly appreciated.
Best Regards,
Cedric Kayitare

Hi Cedric,
Capitalization date won't change it self after import. Check your import sheet which capitalization date you have enter. you need to execute fiscal year change and then import sheet.
If you have capitalization date for different years then you should have all period created and then year transfer.
In that case you will have to run depreciation from SAP for all corresponding year.
Post your sheet with heading for more understanding.
Regards,
Chintan

System copy --- Import issue in Import ABAP phase

HI Team, We are doing migration using system export/import method from win2008/SQL2008 to Win2012/SQL2012 . While doing export there was a problem with table SOFFCONT1 , So we have followed the note 1922094 and changed the size of the package from 1 GB to 2 GB in SOFFCONT1.cmd , After this We have exported the data from the source system using SWPM tool. Now we are importing in to Target system , During the Import ABAP phase we are facing the below issue for same table SOFFCONT1 . Could you please tell us how to fix this issue . Do we need to do same activity for the table while importing also ? =============================================================== H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 11608 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -ctf I \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DATA\SOFFCONT1.STR C:\Program Files\sapinst_instdir\BS2005\ERP60SR3 \LM\COPY\MSS\SYSTEM\CENTRAL\AS-ABAP\DDLMSS.TPL SOFFCONT1.TSK MSS -l SOFFCONT1.log H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job completed H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 10364 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (SQL) INFO: Searching for SQL file SQLFiles.LST (SQL) INFO: SQLFiles.LST not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST not found (SQL) INFO: Searching for SQL file APPL1.SQL (SQL) INFO: APPL1.SQL not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL not found (DB) INFO: SOFFCONT1 created (DB) INFO: SOFFCONT1~0 created Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712163351 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712191514 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 8772 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (DB) INFO: SOFFCONT1 deleted/truncated Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712193907 Thanks, Pavan 91-991 233 6633HI Team, We are doing migration using system export/import method from win2008/SQL2008 to Win2012/SQL2012 . We have exported the data from the source system using SWPM tool. Now we are importing in to Target system , During the Import ABAP phase we are facing the below issue. Could you please tell us how to fix this issue .If you need any other info please reach me out on 91- 991 233 6633 =============================================================== H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 11608 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -ctf I \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DATA\SOFFCONT1.STR C:\Program Files\sapinst_instdir\BS2005\ERP60SR3 \LM\COPY\MSS\SYSTEM\CENTRAL\AS-ABAP\DDLMSS.TPL SOFFCONT1.TSK MSS -l SOFFCONT1.log H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job completed H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712143736 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 10364 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (SQL) INFO: Searching for SQL file SQLFiles.LST (SQL) INFO: SQLFiles.LST not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/SQLFiles.LST not found (SQL) INFO: Searching for SQL file APPL1.SQL (SQL) INFO: APPL1.SQL not found (SQL) INFO: Searching for SQL file \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL (SQL) INFO: \\192.168.114.11 \y\Migration\Ghana_Migration_Ecc\\export\ABAP\DB/MSS/APPL1.SQL not found (DB) INFO: SOFFCONT1 created (DB) INFO: SOFFCONT1~0 created Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712163351 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140712191514 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.6 [UNICODE] Compiled Dec 4 2013 17:25:27 patchinfo (patches.h): (0.138) Abort R3load task if TOC file has not entry for the table (note 1914260) process id 8772 H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe -i SOFFCONT1.cmd -dbcodepage 4103 -l SOFFCONT1.log -loadprocedure fast (DB) INFO: connected to DB (GSI) INFO: dbname = "GFGH-SAP- " (GSI) INFO: vname = "MSSQL " (GSI) INFO: hostname = "GFGH-SAP- " (GSI) INFO: sysname = "Windows NT" (GSI) INFO: nodename = "GFGH-SAP-" (GSI) INFO: release = "6.3" (GSI) INFO: version = "9600 " (GSI) INFO: machine = "6x AMD64 Level 21 (Mod 2 Step 0)" (DB) INFO: SOFFCONT1 deleted/truncated Interface access functions from dynamic library dbmssslib.dll loaded. (IMP) INFO: ExeFastLoad failed with (IMP) ERROR: ExeFastload: rc = 2 (DB) INFO: disconnected from DB H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error (s) H:\usr\sap\\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140712193907 Thanks, Pavan 91-991 233 6633

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost above discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Zpool import issue

Similar Messages

Maybe you are looking for