ZR65MC camcorder does not turn on with battery in position unless the power adapter is plugged in

Bought a ZR65MC camcorder in 2003.  Enjoyed it so much, but a couple of yrs. ago, the tape compartment stopped opening.  I just purchased another ZR65MC (used) on ebay in hopes that I could at least get the videos off & onto DVDs.  Also, we are planning trip to Yellowstone soon, so camera/camcorder will be nice.  Problem:  The used one does not turn on with a fully charged battery unless the power adapter is plugged in.  I assume battery is good because it turns on my older camera.  I do need backup batteries in both, but have not done this yet.  Please tell me I have not purchased a bad camera, maybe just doing something wrong?  Would have never purchased a used camera online, but did this time.  I have ordered a new battery BP-522 with wall charger.  It should arrive next week.  Any suggestions?

Hi Sharon72064,
If the new battery won't power the camcorder without the Compact Power Adapter, unfortunately, it's likely that an internal component has malfunctioned.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    Take it back to the Apple Store for repair since it's still in warranty.

  • I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

    I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

    Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

  • HT201412 My ipad does not turn off...i tried pressing the Sleep/Wake button and Home button for 10 secs but no response. Also, the screen is not rotating on portrait or landscape view...any suggestions?

    My ipad does not turn off...i tried pressing the slep/wake button and home button for more than 10 secs but nothing hapened. Also, the screen is not rotating on portrait and landscape views...

    While this could potentially be a hardwar issue:
    Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
    If the reset doesn't work, you may need to consider restoring the iPad to factory settings

  • Why does my macbook only turn on when the power adapter is plugged in?

    The battery life says its at 73% and climbing but whenever I unplug my power adapter the mac automatically shuts down and if I try to turn on the macbook without my power adapter plugged in, it wont turn on. How do I make it go back to where I can turn the mac on without it being plugged in? Thank you for your help!

    I would try two things the first being resetting the System Management Controller:
    1) If the computer is on, turn it off.
    2) Disconnect the AC Adapter and remove the computer's battery.
    3) Press and hold down the power button for 5 seconds and then release the button.
    4) Reconnect the battery and AC Adapter.
    5) Press the Power button to restart the computer.
    If that doesn't work I would recalibrate the battery.
    To calibrate the battery:
    1) Plug in the MagSafe power adapter and fully charge the MacBook or MacBook Pro battery until the light on the MagSafe connector changes to green and the Battery icon in the menu bar indicates that the battery is fully charged.
    2) Allow the battery to rest in the fully charged state for two hours or longer. You may use your computer during this time as long as the power adapter is plugged in.
    3) Disconnect the power adapter with the computer on and start using it with battery power. When the battery's charge gets low, you’ll see the low battery warning dialog on the screen.
    4) Continue to keep your computer turned on until it goes to sleep. Save your work and close all applications when the battery's charge gets low and before the computer goes to sleep.
    5) Turn off the computer or allow it to sleep for five hours or longer.
    6) Reconnect the power adapter and leave it connected until the battery is fully charged. You may use your computer during this time.

  • My blackberry z30 does not turn on with red light flashing

    hi i have a blackberry z30 , after charging my blackberry z30 it does not turn on and show me a red light blinking 5 times...what i should do? please help. 

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):Connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesHold the up/down volume keys until the device is fully powered offWait 15 minutesPower up normallyWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs. If it fails, then please try again but increase the step 4 wait time to 2 hours, and perhaps as long as 4-5 hours. If it fails to help, then your next step is in-person evaluation by a qualified technician. If you remain in warranty, seek support under those terms. If you have no warranty, then seek out a local (to you) shop with a qualified technician and have them provide you with a proper evaluation and estimate.
    Good luck and let us know!

  • Macbook Pro does not turn on, service battery

    Heres the backstory. One day, my mac simply wouldnt turn on. No video, no chime. Just one indicator light turns on, then turns off a few seconds later. then turns back on. After that happened, I brought my laptop to school the next day and plugged my friends charger into my computer and it worked. I got home and used it as a desktop for a while keeping it charged and plugged in. Then I needed it for school, so I unplugged it, and it couldnt come on again, exacty like before, just the indicator light coming on and off. i brought it home and charged it to full again, and it turned on, but it only worked if it was charged. if the charger led was green, it would work but if it was orange, it wouldnt. When it did work, under the battery status read "Service Battery." So I used it as a desktop, and then it froze, i force shutdown and now, even though charged, does the indicator light thing.
    tl;dr, when i press the power button, nothing happens except the indicator light turning on then off then on again. Not sure if it is problem with charger, or my "Service battery," All i know is that when i use my friends charger it works, but mine gives the problem stated above. Worked for a while when charged to 100%, now doesnt.
    MBP 7,1 33 months old tried smc resets, pram resets, didnt work.
    Any help is appreciated, thanks.

    OS X is telling you that the battery isn't working, so it has to be replaced. When you see "Service Battery", it means that your battery has to be replaced.
    In Early 2008 and older MacBooks Pro, you can buy the battery at the Apple Online Store and replace it yourself. If you have a newer MacBook Pro, take your MacBook Pro to an Apple Store or reseller to have the battery replaced.
    It's normal that batteries fail after years because their capacity goes down with charges

  • Powerbook G4 17" will not turn on with battery installed

    Hello,
    My PB will not turn on anymore. The battery was down. I bought a new battery and it is loading properly (except for the light on the adapter is always green while loading). But when I try to put the PB on, with only the battery installed, nothing happens. I just hear the fan is turning on, but it will not start-up.
    If I remove the battery and plug-in the adapter the PB starts-up normally.
    It's strange, I really thought i'd solve the problem with a new battery, but it doesn't help.
    Anybody know what is going on here?

    I have the same problem with my 17" Powerbook G4. I replace the PRAM battery and that did not work. I took it to the local Apple store to have them take a look at it the the tech said he had never seen one act like this. He told me that his guess was the it is a bad logic board. Not sure I want the put that kind of money into it. Its a good laptop but the logic boards are high in price. One thing I though about doing just to see is to replace the DC in board. There is a web site call powerbookmedic.com that has them for 50 bucks. Its the same place I got my PRAM battery.

  • 5800 does not turn on with SD card

    Hi,
    I have recently used Nokia PC Suite to delete some SMS from my Nokia 5800.
    After that, the phone has stopped turning on when the SD card is in.
    If I remove the SD card, the phone will switch on normally.
    How can I fix this?
    Thanks,
    Marco
    Message Edited by marcoterz on 06-Jan-2010 12:13 PM

    Take the card out of the 5800. Put it in a PC and run a Check Disk on it. Fix all the errors. Re-insert it into your 5800.
    If that doesn't work. Copy the contents of the card on your PC in a directory. Format the card. Copy stuff back on it. Re-insert it into your 5800.
    Gilles. 

  • Thunderbolt-Display: Screen does not light up randomly after reconnect it to the power grid.

    So, I got myself really lucky a few days ago and got a "faulty" Thunderbolt display for ridiculously cheap.
    So far it is working perfectly, yet the previous owner told me that the screen stays dark occasionally, although the device is recognized my the Mac.
    I could track down the problem somewhat to the fact, that this only happens when you disconnect the Display completely from power grid, forcing it to shut down instead of going into standby. I recognized this after relocating it to my home and plugging it in again. After a few times replugging it, it went to work again and it is totally fine.
    Does anybody know what this can be connected to? Damaged inverter? As I said it works flawlessly, but I have it now plugged in constantly anyway. I just seek some more information what could come my way in the future worst case. Considering I expected to get a new panel I'm totally happy.
    Thanks for any help.

    To have the screen light up, you need to go into Notifications and set it to be seen in the lock screen. See the User Guide for help with Notifications. http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Imac  27" does not turn off

    Hi,
    I have a brand new iMac 27" all in one, which works perfectly except for the fact that 3 times out of 4 it does not turn off with the normal command and I am obliged to turn it off with the back switch, after it remain for various minutes  with the blue window on and the wheel running.
    Initially I tried to disconnect an external HDD which was connected by USB and seemed to have solved the problem for a few days, but now the problem shows up again.
    At the moment I have connected only a Bamboo device on the USB port.
    I have tried to Verify the HDD and repair the disk, but no improvement.
    Any suggestion on how to proceed?  Thank you
    SS

    If all the prior steps have not resolved the issue then at this point I would suggest:
    Remove any additional memory you may have added to the system
    Reinstall of the OS: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8177.html
    If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
    If this issue was occurring right out of the box on the brand new system without you adding any additional software / migrating data from an older Mac, be sure to let them know that as well.  Its unusual to have a blank, brand new system have this kind of behavior so that will save them some diagnostic steps.
    Best of luck to you.

  • Display does not turn on even though computer is running

    Hello All,
    I have a 2008 non-unibody MacBook Pro. When I boot the computer, sometimes the display does not turn on. I've tried using the flashlight technique, and there isn't even anything on the LCD. I know the computer is on because it makes the chime and if I enter my password I can adjust the volume and play music. Occasionally, resetting the SMC will fix the issue temporarily, but it doesn't always work. What should I do?

    Tried  resetting PRAM?
    Some  of the display settings are stored in PRAM.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • My  BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

    My  BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

    Hello Sabroso007
    Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Regards,
    -Norm G.

  • Macbook pro turns on when power adapter is plugged in

    Sometimes my macbook pro (early 2011), turns itself on when i plug the power adapter is plugged in, and the screen is black and unuseable and I have to hold down the power button to turn it off. Then i turn it back on and all is fine.
    It does not happen all the time and I believe it has something to do with my power on schedule (my computer turns itself on at 2:00am and turns off at 7:50am) however it still turns on if the power adapter is plugged in after 8am
    Just wondering if this happens a lot or my hardware is dodgy? (has happened on 10.7, 10.7.1, 10.7.2)
    Tim

    +I always power down my mac mini when not in use and then turn off the surge protector. ... Also this keeps resetting the internal clock.+
    Since you have done this as a habit and it is an older machine, I suspect the "watch battery" inside the Mini that powers the Mini's pram needs to be replaced. These seem to get depleted faster when Minis aren't connected to power full time.

  • Ipod touch 5th gen does not turn on and i only get an empty battery with thunderbolt at the bottom when i try to recharge it

    ipod touch does not turn onand i get empty batterywith small thunderbolt at the bottom wen i try to charge it

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

Maybe you are looking for

  • Hyper-v VM - merged .avhd files - now cant start as missing .vsv file

    Hi All, Yesterday i shut down one of our VMs to allow the snapshots to merge and then tried to start the VM but got the following error: 'VM' could not initialize. An attempt to initialize VM save state failed. 'VM' could not initialize. (Virtual Mac

  • 23" works on One but not the Other

    I have a Powerbook G4 1.25 GHz running 10.3.9 connected to a similar vintage 23" clear plastic case display with a DVI to ADC adapter connection and it works great. My husband recently bought a used Powerbook G4 1.67 GHz running 10.4.8. We thought su

  • Disabling shipping details for configurator model item in istore.

    Hi all, I am working in istore implementation process in R12. I got some Issues while using using Configurator ATO model item in istore. If we disable the"Shippable" flag for single item means, it was "NON-Shippable" item, And we never get any shippi

  • Webservices Doubt!!

    Hi Experts, Our business team needs that 4 webservices should be taken backup in 100 client.They should not be lost at any cost.Is there any way we can take backup of webservices?Can we do client export of 100 client & if required we will do import?W

  • How to EXIT the while loop in Event response section?

    I'm writing a program to grab image using a NI card. The application uses the Event structure. When the GRAB button was pressed, it snaps image continually by putting the SNAP function in a while loop. Is there some way to exit the while loop?(Note :